ELEMENTS 9 SHARE EMAIL ATTACHMENT

I have spent numerous hours on the phone with Adobe support to no avail.  I can sent photos via the "Share" fucntion but not all go through.  Some days it is 80% that are successful and other days 50%.  Does anyone else have this issue?  Anyone have an ideas?  I use Windows 7 and Cox webmail and have no issues with my service.  I can use other methods to emial but the share funtion is easy and should work as advertised???

Yes. The suggested work around is to install an earlier version of Live Mail.
However that is not guaranteed to work and I would not recommended it.
http://kb2.adobe.com/cps/884/cpsid_88405.html

Similar Messages

  • Share - Email attachment

    When I open an email in Adobe Email service  I cannot edit the content. Why?

    Hi,
    I suggest that you log in to the feedback site and add to the count of people with the problem there. The higher the count, the greater chance of a fix - especially in the next version.
    The bug report can be found at
    http://feedback.photoshop.com/photoshop_family/topics/pse_11_problem_with_adobe_email_serv ice_editor
    Brian

  • Photoshop premiere elements 13 no email option under share PC

    I created a trade show ad using photoshop elements premiere 13.  I need to email this project, yet there is no email option to choose from the list under "share"  I specified outlook as my email client and I'm using a pc.  Any help would be great. Thanks

    valbom
    Premiere Elements comes with an Elements Organizer, and it is that Elements Organizer/Share that has had the Photo Mail and Email Attachments choices.
    In Elements Organizer 13/Share that comes with Premiere Elements 13, Photo Mail and Email Attachments names are gone from the list under Share and only
    "Email" is seen. Using this Email choice, you can email photos and videos as attachments. You will get a warning message if the file size exceeds 10 MB, but I have been able to send a 25 MB video, using Gmail in preferences and sending it to myself at my Gmail address. The size issue goes to the Internet provider limitations rather than the Share feature. Although the email was "successfully" sent at that size, I am still trying to verify that I will receive it.
    What I found a challenge was setting up this "Email" in preferences. With Email Clients = AOL, Gmail, Yahoo!Mail, or Microsoft Account (HotMail), there should not be any problems since the user is not asked to specify a Server Name or Port. But, if you have to go to "Other" and give those details, problems. I am going to be writing this up in my blog within the next 24 hours. The blog will have more details....most important I will write how to clear the mess after you go to Other and have a list of non working Email Profiles that refuse to delete within the preference area.
    What are the details of your situation? What Email client do you want to use? And, will an Email attachment serve your purposes.
    To be continued....
    ATR

  • Problem - email attachment, Elements 7 & Windows 7

    Both email attachment and photo mail do not work.  I just purchased a new Dell computer with Windows 7 and they installed Photoshop Elements 7.  I have tried setting the email setting to both Windows Live mail and to Adobe email service and neither works - I get error messages with both.
    Does Photoshop Elements 7 work with Windows 7.  If it does, how can I get email attachment and photo mail to work?
    I have set my default email to Windows Live Mail (Outlook express is not supported in Windows 7) and it doesn't help.
    I need help.  Does anyone have an answer?

    Please tryout the suggestion by Adobe employee http://forums.adobe.com/message/2664893#2664893. It should work. Let me know if it solves the issue.
    ~V

  • Cant share by email attachment

    When I try to share a photo by email attachment, action stalls and will not complete.
    Any ideas will be appreciated.

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail on PSE11 which works fine. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • Elements 9 share photo email crashes?

    photo shop emements 9 share photo email crashes

    Will need a bit more detail here.
    Are doing a Photo Mail, or email attachement?
    Are you using the Adobe Email Service, or a client (e.g. Outlook)?
    Is there an error?
    At what point in the creation of the email does it crash?
    Has it worked in the past?
    Has it (does it) work with different files?

  • I can not share any document as Email Attachment in OSX Mountain Lion

    Hi
    Since the time I have installed OSx Mountain Lion. I am having this problem. I can not share any file, like a word file or pdf file as Email Attachment. 
    I could do in in Lion earlier.
    I open a file > share > as Email attachment.  It is not working
    Anyone having the same problem.

    Thx a lot mcsound , this really resolved this issue. 
    1. Now if I go to file>share>Email as attachemnt can be selected but still share> Email as link is not selectable
    2. I had one more issue,  when I compose Email, I go to attach>select pdf file> choose file and try and send pdf attachment in Email from apple mail, the reciver does not get the pdf attachment, just get the plain Email. . But if I try and attach word or excel file, it goes well.
    Now if I open gmail in my browser and attache pdf file, it goes well to the receiver.
    Please see if you have any solution to this.
    thx once again. 

  • Share Ovi image Upload via email attachment method

    I'm trying to upload images to a share ovi  album using the email attachment method.  I'm using the correct address: [email protected]  It's not working. Giving a guest the option of uploading with a guest address in not working either. Am I the only one having this problem?

    Yep. I just test it, it not work via email. Sucks.

  • Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed.

    Since upgrading to Mail 7.0 the menu popup from right clicking an element in an email has changed.  There is now only a short three item menu:
    Previously there was a longer menu (like the one when right clicking an item on a Safari page):
    I've looked in Preferences and at all the Mail dropdown items but can't find any way to get the old menu back (or why it changed).  In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding.  I've got two email accounts, an IMAP and a POP.  The behavior is the same with both.
    Any ideas?
    Thanks,
    Richard

    Your screen shots are not visible to me.  But I think I understand your question.
    Several thoughts come to mind:
    rbhix wrote:
    In particular, I miss the "copy image" item which allowed me to copy an item image into a new email for forwarding.
    You can still, of course, simply forward the entire email message containing the image.
    You could also use the "Save Attachment ..." feature available when you right click and copy and paste from there once the image is saved.
    Less likely, you could also use the "Share" feature available when you right click, though I suspect it may not offer sharing options that you would like.

  • Acrobat XI email attachment does not appear to work with Outlook 2013 64 bit

    When attempting to send email from Acrobat, the following Microsoft Office Outlook 2013 64 bit error message is received: 
    "Either there is no default mail client or the current mail client cannot fulfill the messaging request.  Please run Microsoft Outlook and set it as the default email client."
    Naturally, Outlook was set as default client and then reset for good measure.  I did both Outlook and Acrobat repairs and have the latest 11.0.2 installed.  All other internal Office 2013 email applications work as well as seemingly all other embedded Acrobat funcitions with Office 2013 work well.  Office 2010 64 bit and Acrobat X worked fine.  I upgraded to Office 2013 64 bit and had the problem with Acrobat X.  I then upgraded to Acrobat XI and the issue remained.
    Most importantly, I intalled Office 2013 64 bit on my laptop with Acrobat X.  An the email attachment function works perfectly. 
    So, is there some sort of corrupt MAPI file that I have to overwrite on my desktop that the Ofice and Acrobat repair functions do not fix?
    Thanks,
    Joe

    I am sorry.  In my haste, not only did I attach the link the wrong way, but I also did not specify which solution worked.  My problem was a Click to Run issue.  The portion of the thread that deals with the problem is:
    "HurdleRemove replied on May 16, 2013
    I created a solution for this problem for 64 bit Windows 8 where Outlook 2013 was installed as Click-To-Run.......
    ......A  registry edit will fix the problem with Outlook 2013 click to run  installations and enable Outlook to be set as the default mail client.  This registry edit will for many third party programs eliminate the error "Either  there is no default mail client or the current mail client cannot  fulfill the messaging request. Please run Microsoft Outlook and set it  as the default mail client." It  worked to resolve the problem where Adobe Acrobat was generating this  error.
    The registry edit is here for Office  2013 64 bit click to run installations that will enable Outlook 2013 to  be recognized by third party applications:
    1. Create registry key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\15.0\Outlook
    2. Create String value:
    Bitness
    3. Set the String value for Bitness to:
    x64
    This registry edit is an essential element  necessary to resolve the click to run problem that prevents Outlook 2013  from being set as the default mail client. Although it worked with  Adobe Acrobat, it will not completely resolve the  problem for some third party applications like Kerio Outlook Connecter  where the software developer has a web site that includes extra steps  necessary for a full resolution for the Kerio product. The Kerio web  site includes this registry edit in the context  of resolving the Office 365 problem. However, the registry edit works  with Office 2013 desktop as well. A similar register edit could likely  be made for 32 bit versions but the registry path would not include Wow6432Node. I do not have a 32 bit machine and cannot test a 32 bit solution."

  • Excel doc as email attachment

    Hi Experts
    Hope you guys are doing fine.
    I have a requirement where i need to send the internal table data as an excel email attachment.I used the FM 'SO_NEW_DOCUMENT_ATT_SEND_API1',but in the email attachment,the data is getting distorted and not coming in a properly manner.Here with,i am pasting the code i used.
    (l_pto_tab is the internal table)
    FORM report_as_email .
      TYPES : BEGIN OF ty_pto_tab,
               pernr(10),
               nachn(40),
               vorna(40),
               hdate(15),
               supno(10),
               supln(40),
               supfn(40),
             END    OF  ty_pto_tab.
      DATA:   wa_pack_list  TYPE sopcklsti1,
              it_pack_list  TYPE TABLE OF sopcklsti1.
      DATA:  it_email_lines  like SOLISTI1 occurs 0 with header line,
             it_obj_text  like SOLISTI1 occurs 0 with header line.
      DATA:  wa_object_header  TYPE solisti1,
             it_object_header  TYPE TABLE OF solisti1.
      DATA: wa_mail_receiver  TYPE somlreci1,
            it_mail_receiver  TYPE TABLE OF somlreci1.
      DATA: wa_mail_data      TYPE sodocchgi1,
            l_pto_tab type ty_pto_tab occurs 0 with header line.
      DATA: w_att_lines(6) TYPE n.
      DATA: w_att_lines1(6) TYPE n.
      DATA: text1 TYPE c LENGTH 155.
      DATA: text2 TYPE c LENGTH 155.
      DATA: text3 TYPE c LENGTH 155.
      DATA: wa_error_cols  TYPE ty_email_lines.
      DATA: count TYPE i.
      DATA: gv_date1 TYPE c LENGTH 10.
      REFRESH: it_pack_list,
               it_object_header,
               it_mail_receiver.
    Set first line to be displayed in the document
      wa_object_header-line = 'PTO_Reminder_List.TXT'.
      APPEND wa_object_header TO it_object_header.
    *-- Document data
      CLEAR: wa_mail_data.
      wa_mail_data-obj_name = 'Object name'.
      wa_mail_data-sensitivty = 'O'.
      wa_mail_data-obj_descr = 'PTO Reminder Report'.
    Set Mail body
    it_obj_text = 'PTO Reminder'.
    append it_obj_text.
    clear it_obj_text.
    *-- Set Attachment values
      l_pto_tab-pernr = 'EE Number'.
      l_pto_tab-nachn = 'EE LNAME'.
      l_pto_tab-vorna = 'EE FNAME'.
      l_pto_tab-hdate = 'Hire Date'.
      l_pto_tab-supno = 'Sup No'.
      l_pto_tab-supln = 'Sup LNAME'.
      l_pto_tab-supfn = 'Sup FNAME'.
      INSERT l_pto_tab INTO it_email_lines INDEX 1.
      CLEAR l_pto_tab.
    count = 1.
    loop at it_pto_tab.
      l_pto_tab-pernr = it_pto_tab-pernr.
      l_pto_tab-nachn = it_pto_tab-nachn.
      l_pto_tab-vorna = it_pto_tab-vorna.
      l_pto_tab-hdate = it_pto_tab-hdate.
      l_pto_tab-supno = it_pto_tab-supno.
      l_pto_tab-supln = it_pto_tab-supln.
      l_pto_tab-supfn = it_pto_tab-supfn.
      append l_pto_tab.
      clear l_pto_tab.
      endloop.
    l_pto_tab is the internal table
      LOOP AT l_pto_tab.
          count = count + 1.
          INSERT l_pto_tab INTO it_email_lines INDEX count.
        ENDLOOP.
      REFRESH  l_pto_tab.
      wa_pack_list-head_start = 1.
      wa_pack_list-head_num   = 0.
      wa_pack_list-body_start = 1.
      wa_pack_list-body_num   = 1.
      wa_pack_list-doc_type   = 'RAW'.
      wa_pack_list-doc_size   = 255.
      APPEND wa_pack_list TO it_pack_list.
      CLEAR: wa_pack_list.
    DESCRIBE TABLE it_email_lines LINES w_att_lines.
    READ TABLE it_email_lines INDEX w_att_lines.
    wa_mail_data-doc_size = ( w_att_lines - 1 ) * 255 +
                     STRLEN( it_email_lines-line ).
    Attachment
      wa_pack_list-transf_bin = 'X'.
      wa_pack_list-head_start = 1.
      wa_pack_list-head_num   = 1.
      wa_pack_list-body_start = 1.
      wa_pack_list-body_num   = w_att_lines.
    Excel attachment
      wa_pack_list-doc_type   = 'XLS'.
      wa_pack_list-obj_name   = 'ATTACHMENT'.
      wa_pack_list-obj_descr  = 'PTO_REMINDER_LIST'.
      wa_pack_list-doc_size   = wa_mail_data-doc_size.
      APPEND wa_pack_list TO it_pack_list.
      CLEAR: wa_pack_list.
    *-- Set E-Mail Receiver address
      wa_mail_receiver-receiver = '[email protected]'.
      wa_mail_receiver-rec_type = 'U'.
      wa_mail_receiver-express  = 'X'.
      APPEND wa_mail_receiver TO it_mail_receiver.
      *-- Send E-Mail
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
        exporting
          document_data              = wa_mail_data
          put_in_outbox              = 'X'
          commit_work                = 'X'
        tables
          packing_list               = it_pack_list
          object_header              = it_object_header
          contents_bin               = it_email_lines
          contents_txt               = it_obj_text
          receivers                  = it_mail_receiver
        exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          document_type_not_exist    = 3
          operation_no_authorization = 4
          parameter_error            = 5
          x_error                    = 6
          enqueue_error              = 7
          others                     = 8.
      IF NOT sy-subrc IS INITIAL.
        WRITE: / 'E-mail failed.'.
      ENDIF.
    ENDFORM.                    " report_as_email
    Can anyone look into this code and let me know what changes i need to make to correct this error.Or if anyone has any sample code,can you pls share it with me.
    Your help wud be greatly appreciated.
    Thnx

    alan,
      Check the below code.
    report y_cr17_mail .
    data method1 like sy-ucomm.
    data g_user like soudnamei1.
    data g_user_data like soudatai1.
    data g_owner like soud-usrnam.
    data g_receipients like soos1 occurs 0 with header line.
    data g_document like sood4 .
    data g_header like sood2.
    data g_folmam like sofm2.
    data g_objcnt like soli occurs 0 with header line.
    data g_objhead like soli occurs 0 with header line.
    data g_objpara  like selc occurs 0 with header line.
    data g_objparb  like soop1 occurs 0 with header line.
    data g_attachments like sood5 occurs 0 with header line.
    data g_references like soxrl occurs 0 with header line.
    data g_authority like sofa-usracc.
    data g_ref_document like sood4.
    data g_new_parent like soodk.
    data: begin of g_files occurs 10 ,
      text(4096) type c,
       end of g_files.
    data : fold_number(12) type c,
           fold_yr(2) type c,
           fold_type(3) type c.
    parameters ws_file(4096) type c default 'c:\debugger.txt'.
    Can me any file fromyour pc ....either xls or word or ppt etc ...
    g_user-sapname = sy-uname.
    call function 'SO_USER_READ_API1'
    exporting
       user                            = g_user
       PREPARE_FOR_FOLDER_ACCESS       = ' '
    importing
       user_data                       = g_user_data
    EXCEPTIONS
       USER_NOT_EXIST                  = 1
       PARAMETER_ERROR                 = 2
       X_ERROR                         = 3
       OTHERS                          = 4
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    fold_type = g_user_data-outboxfol+0(3).
    fold_yr = g_user_data-outboxfol+3(2).
    fold_number =  g_user_data-outboxfol+5(12).
    clear g_files.
    refresh : g_objcnt,
      g_objhead,
      g_objpara,
      g_objparb,
      g_receipients,
      g_attachments,
      g_references,
      g_files.
    method1 = 'SAVE'.
    g_document-foltp  = fold_type.
    g_document-folyr   = fold_yr.
    g_document-folno   = fold_number.
    g_document-objtp   = g_user_data-object_typ.
    *g_document-OBJYR   = '27'.
    *g_document-OBJNO   = '000000002365'.
    *g_document-OBJNAM = 'MESSAGE'.
    g_document-objdes   = 'Manohar testing by program'.
    g_document-folrg   = 'O'.
    *g_document-okcode   = 'CHNG'.
    g_document-objlen = '0'.
    g_document-file_ext = 'TXT'.
    g_header-objdes =  'Manohar testing by program'.
    g_header-file_ext = 'TXT'.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = sy-uname
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header
      FOLMEM_DATA        =
      RECEIVE_DATA       =
    File from the pc to send...
    method1 = 'ATTCREATEFROMPC'.
    g_files-text = ws_file.
    append g_files.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = g_owner
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header
    method1 = 'SEND'.
    g_receipients-recnam = 'MK085'.
    g_receipients-recesc = 'B'.
    g_receipients-sndex = 'X'.
    append  g_receipients.
    call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
      exporting
        method             = method1
       office_user        = g_owner
       ref_document       = g_ref_document
       new_parent         =  g_new_parent
    importing
       authority          =  g_authority
    tables
       objcont            = g_objcnt
       objhead            = g_objhead
       objpara            = g_objpara
       objparb            = g_objparb
       recipients         = g_receipients
       attachments        = g_attachments
       references         = g_references
       files              = g_files
      changing
        document           = g_document
       header_data        = g_header.
    Don't forget to reward if useful.......

  • Error Message when using Photoshop Element 9 sending email

    I was using Photoshop Element 9 sending email on Windows Live Mail.
    It was working perfect.
    A week ago, my computer had the problem and need to format and reinstall everything again.
    After that, when I used Photoshop Element 9 to send email using Windows Live Mail 2012.
    It came up error message in below:
    "Elements Organizer could not finish creating your E-mail message.
    Alternatively, you can use the Adobe E-mail Service via the Elements Organizer Preferences dialog."
    I don't want to use Adobe E-mail Service because it is very limited for email function such as attached another files or change email contents.
    Would you please give me some idea how to solve the problem ?
    Thanks,
    Joe

    Please refer the below link:
    http://forums.adobe.com/message/3284248#3284248
    http://helpx.adobe.com/photoshop-elements/kb/freeze-or-error-no-email.html
    -Harshit yadav

  • Email attachment PDF format

    Gurus,
    Can any body logic for the below requirement for my Report. Report is also pasted. Thanks!
    Create a table as given in the requirement
    Table:
    Cleint   Jobname Email ID  Active  Subject Text  Body Text
                                                       SO10           SO10
    ·         The email part should contain the entire log and spool if available.
    ·         Once you have the job list, loop on the list and check if the job is defined in your custom table
    o   If you find an entry then
    §  Read the Job Log and convert it to HTML
    §  Read the spool if available and convert it to pdf
    §  Create an email with
    ·         To: Mail id from your custom table
    ·         Subject [ below: ]
    o   Then write the entire job log.
    o   Give one blank line
    o   If spool list is available the write else write
    o   Give one blank line
    o   Write
    ·         Attachment should contain the PDF attachment of the spool.
    o   If the email fails then Write (donu2019t give message) the Job name and message that email failed.
    o   If you donu2019t find a mail ID for the job Write (donu2019t give message) the Job name and message that email not found.
    ·         Continue to the next Job in your list.
    REPORT ZJOB_MONITORING.
    T A B L E S
    TABLES: tbtco.
    T Y P E - S P O O L S
    TYPE-POOLS: slis.
    T Y P E  D E C L A R A T I O N S
    *TYPES: BEGIN OF type_tbtco,
           include TYPE tbtco,
          END OF type_tbtco.
    TYPES: BEGIN OF type_output,
           STRTTIME TYPE tbtco-STRTTIME,
           strtdate TYPE tbtco-strtdate,
           jobname  TYPE tbtco-jobname,
           line     TYPE string,
           END OF type_output.
    S T R U C T U R E S
    DATA: s_tbtco  TYPE tbtco,
          s_joblog TYPE zsbb_uc4_joblog,
          s_output TYPE type_output.
    I N T E R N A L  T A B L E S
    DATA: i_tbtco  TYPE STANDARD TABLE OF tbtco,
          i_joblog TYPE STANDARD TABLE OF zsbb_uc4_joblog,
          i_output TYPE STANDARD TABLE OF type_output.
    DATA: Begin of itab_jobname OCCURS 0,
          jobname type tbtco-jobname,
          end of itab_jobname.
    DATA: Begin of itab_user OCCURS 0,
          jobname type tbtco-sdluname,
          end of itab_user.
    DATA: Begin of itab_stat OCCURS 0,
          jobname type tbtco-status,
          end of itab_stat.
    DATA: Begin of itab_uzeit occurs 0,
          uzeit type sy-uzeit,
          end of itab_uzeit.
    Heading of the report.
    DATA: t_heading TYPE slis_t_listheader.
    DATA : t_fieldcat TYPE slis_t_fieldcat_alv.
    S E L E C T I O N  S C R E E N
    SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_strtda FOR sy-datum,
                    s_lstrun FOR sy-uzeit OBLIGATORY,
                    s_jobnam FOR tbtco-jobname,
                    s_user   FOR tbtco-sdluname,
                    s_status FOR tbtco-status.
    PARAMETERS: p_email AS CHECKBOX.
    SELECTION-SCREEN END OF BLOCK bl1.
    "                         AT SELECTION-SCREEN
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_JOBNAM-LOW.
      PERFORM f4_JOBNAM-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_JOBNAM-HIGH.
      PERFORM f4_JOBNAM-HIGH.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_user-low.
      PERFORM f4_USER-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_user-high.
      PERFORM f4_USER-HIGH.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_status-low.
      PERFORM f4_STATUS-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_status-high.
      PERFORM f4_STATUS-HIGH.
    S T A R T  O F  S E L E C T I O N
    START-OF-SELECTION.
      PERFORM select_data.
    If email is checked.
    Send the output table as an email attachment to the distribution list.
    Get the email list from the config table. " ask from where to get it
      IF p_email = 'X'.
    Call FM 'SO_OBJECT_SEND'.
    Fill the fields which are not commented accordingly.
    CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
         OBJECT_HD_CHANGE = OBJECT_HD_CHANGE
         OBJECT_TYPE      = 'RAW'
         OWNER            = SY-UNAME
       TABLES
         OBJCONT          = TEXT
         OBJPARA          = OBJPARA
         RECEIVERS        = RECEIVERS
       EXCEPTIONS
         OTHERS           = 01.
    IF SY-SUBRC NE 0.
       RAISE ERROR.
    ENDIF.
    ENDIF.
    Prepare the ALV Report.
    PERFORM alv_grid_display.
    *&      Form  alv_grid_display
          text
    FORM alv_grid_display .
    alv required data objects.
      DATA: w_repid    TYPE syrepid,
            x_layout   TYPE slis_layout_alv,
            t_event    TYPE slis_t_event,
           t_fieldcat TYPE slis_t_fieldcat_alv,
            w_title    TYPE lvc_title,
            w_print    TYPE slis_print_alv,
            w_comm    TYPE slis_formname,
            flag       TYPE c VALUE 'N'.
      REFRESH t_fieldcat.
      REFRESH t_event.
      CLEAR   x_layout.
      CLEAR   w_title.
    Field Catalog
    PERFORM set_fieldcat2 USING:
       1 'strttime'   'BTCXTIME'   space           t_fieldcat ,
       2 'jobname'    'BTCJOB'     space           t_fieldcat ,
       3 'line'        space       'Job Log'       t_fieldcat .
    *PERFORM set_fieldcat2 USING:
       1 'strttime'   'BTCXTIME'   space     'I_OUTPUT'      t_fieldcat ,
       2 'jobname'    'BTCJOB'     space     'I_OUTPUT'      t_fieldcat ,
       3 'line'        space       'Job Log' 'I_OUTPUT'      t_fieldcat .
      PERFORM set_fieldcat.
    Layout
      x_layout-zebra = 'X'.
      x_layout-colwidth_optimize = 'X'.
    GUI Status
      w_repid = sy-repid .
    Top of page heading
    PERFORM set_top_page_heading USING t_heading t_event flag.
    call the FM 'REUSE_ALV_GRID_DISPLAY'
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                = w_repid
         is_layout                         = x_layout
         it_fieldcat                       = t_fieldcat
        IT_SORT                           =
         i_save                            = 'X'
         it_events                         = t_event
       TABLES
          t_outtab                         = i_output
       EXCEPTIONS
         program_error                     = 1
         OTHERS                            = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " alv_grid_display
    *&      Form  set_top_page_heading
          text
    FORM set_top_page_heading  USING
                               t_heading TYPE slis_t_listheader
                               t_events  TYPE slis_t_event
                               flag      TYPE c.
      DATA: x_heading TYPE slis_listheader,
            x_event   TYPE LINE OF slis_t_event.
    Report title
      CLEAR t_heading[].
      CLEAR x_heading.
      x_heading-typ = 'H'.
      x_heading-info = 'Job Details'(002).
      APPEND x_heading TO t_heading.
    Name of the report program
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Report ID:'.
      x_heading-info = sy-repid.
      APPEND x_heading TO t_heading.
    User who is running the report
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'User: '.
      x_heading-info = sy-uname.
      APPEND x_heading TO t_heading.
    Date of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Date: '.
      WRITE sy-datum TO x_heading-info.
      APPEND x_heading TO t_heading.
    Time of execution
      CLEAR x_heading.
      x_heading-typ = 'S'.
      x_heading-key = 'Time: '.
      WRITE sy-uzeit TO x_heading-info.
      APPEND x_heading TO t_heading.
    Top of page event
      x_event-name = slis_ev_top_of_page.
      x_event-form = 'TOP_OF_PAGE'.
      APPEND x_event TO t_events.
    ENDFORM.                    " set_top_page_heading
    *&      Form  set_fieldcat2
          text
    FORM set_fieldcat2  USING
                        p_colpos p_fieldname p_ref_fieldname
                        p_seltext_m
                        p_tabname
                        t_fieldcat TYPE slis_t_fieldcat_alv.
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      CLEAR wa_fieldcat.
    General settings
      wa_fieldcat-fieldname = p_fieldname.
      wa_fieldcat-col_pos = p_colpos.
    the ref_fieldname given is a data element.
      IF NOT p_ref_fieldname IS INITIAL.
        wa_fieldcat-rollname =   p_ref_fieldname.
      ENDIF.
    Set text headers.
      IF NOT p_seltext_m IS INITIAL.
        wa_fieldcat-seltext_m = p_seltext_m.
      ENDIF.
      wa_fieldcat-tabname = 'I_OUTPUT'.
      APPEND wa_fieldcat TO t_fieldcat.
    ENDFORM.                    " set_fieldcat2
    *&      Form  F4_JOBNAM-LOW
          text
    -->  p1        text
    <--  p2        text
    FORM F4_JOBNAM-LOW .
      SELECT jobname FROM tbtco
                  INTO TABLE itab_jobname.
      DELETE ADJACENT DUPLICATES FROM itab_jobname.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield             = 'jobname'
      PVALKEY                = ' '
         DYNPPROG               = 'sy-repid'
         DYNPNR                 = '1000'
         DYNPROFIELD            = 's_jobnam-low'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG               = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab            = itab_jobname
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_JOBNAM-LOW
    *&      Form  F4_JOBNAM-HIGH
          text
    -->  p1        text
    <--  p2        text
    FORM F4_JOBNAM-HIGH .
      SELECT jobname FROM tbtco
                    INTO TABLE itab_jobname.
      DELETE ADJACENT DUPLICATES FROM itab_jobname.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield             = 'jobname'
      PVALKEY                = ' '
         DYNPPROG              = 'sy-repid'
         DYNPNR                = '1000'
         DYNPROFIELD           = 's_jobnam-high'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG               = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab            = itab_jobname
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_JOBNAM-HIGH
    *&      Form  F4_USER-LOW
          text
    -->  p1        text
    <--  p2        text
    FORM F4_USER-LOW .
      SELECT sdluname  FROM tbtco
                    INTO TABLE itab_user.
      DELETE ADJACENT DUPLICATES FROM itab_user.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield               = 'user'
      PVALKEY                = ' '
         DYNPPROG               = 'sy-repid'
         DYNPNR                 = '1000'
         DYNPROFIELD            = 's_user-low'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab            = itab_user
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_USER-LOW
    *&      Form  F4_USER-HIGH
          text
    -->  p1        text
    <--  p2        text
    FORM F4_USER-HIGH .
      SELECT sdluname  FROM tbtco
                    INTO TABLE itab_user.
      DELETE ADJACENT DUPLICATES FROM itab_user.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield               = 'user'
      PVALKEY                = ' '
         DYNPPROG               = 'sy-repid'
         DYNPNR                 = '1000'
         DYNPROFIELD            = 's_user-high'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab            = itab_user
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_USER-HIGH
    *&      Form  F4_STATUS-LOW
          text
    -->  p1        text
    <--  p2        text
    FORM F4_STATUS-LOW .
      SELECT status  FROM tbtco
                    INTO TABLE itab_stat.
      DELETE ADJACENT DUPLICATES FROM itab_stat.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield               = 'status'
      PVALKEY                = ' '
         DYNPPROG               = 'sy-repid'
         DYNPNR                 = '1000'
         DYNPROFIELD            = 's_status-low'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab            = itab_stat
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_STATUS-LOW
    *&      Form  F4_STATUS-HIGH
          text
    -->  p1        text
    <--  p2        text
    FORM F4_STATUS-HIGH .
      SELECT status  FROM tbtco
                    INTO TABLE itab_stat.
      DELETE ADJACENT DUPLICATES FROM itab_stat.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        exporting
      DDIC_STRUCTURE         = ' '
          retfield               = 'status'
      PVALKEY                = ' '
         DYNPPROG               = 'sy-repid'
         DYNPNR                 = '1000'
         DYNPROFIELD            = 's_status-high'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
      VALUE_ORG              = 'C'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = ' '
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
        tables
          value_tab              = itab_stat
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
      PARAMETER_ERROR        = 1
      NO_VALUES_FOUND        = 2
      OTHERS                 = 3
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    ENDFORM.                    " F4_STATUS-HIGH
    *&      Form  SELECT_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM SELECT_DATA .
    select the entries from the table TBTCO
    as per the selection screen
      SELECT * FROM tbtco
               INTO TABLE i_tbtco
               WHERE STRTTIME IN s_lstrun AND
                     strtdate IN s_strtda AND
                     jobname  IN s_jobnam AND
                     sdluname IN s_user   AND
                     status   IN s_status.
    Get the job details for the above jobs.
      LOOP AT i_tbtco INTO s_tbtco.
        CALL FUNCTION 'ZSBB_UC4_JOB_READ_LOG'
          EXPORTING
            client                = sy-mandt
            jobcount              = s_tbtco-jobcount
            joblog                = s_tbtco-joblog
            jobname               = s_tbtco-jobname
          TABLES
            joblog_tab            = i_joblog
          EXCEPTIONS
            cant_read_joblog      = 1
            jobcount_missing      = 2
            joblog_does_not_exist = 3
            joblog_is_empty       = 4
            joblog_name_missing   = 5
            jobname_missing       = 6
            job_does_not_exist    = 7
            OTHERS                = 8.
    Write the Error handling as needed.
        IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ELSE.
    Append entries to main table.
          s_output-STRTTIME = s_tbtco-STRTTIME.
          s_output-jobname  = s_tbtco-jobname.
          LOOP AT  i_joblog INTO s_joblog.
            s_output-line = s_joblog-text.
            APPEND s_output TO i_output.
            CLEAR s_output.
          ENDLOOP.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " SELECT_DATA
    *&      Form  SET_FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    form SET_FIELDCAT .
      DATA: wa_fieldcat TYPE slis_fieldcat_alv.
      wa_fieldcat-col_pos = 1.
      wa_fieldcat-fieldname = 'STRTTIME'.
      wa_fieldcat-seltext_m = 'Start Time'.
      wa_fieldcat-tabname = 'I_OUTPUT'.
    wa_fieldcat-reptext = p_reptext.
      APPEND wa_fieldcat to t_fieldcat.
      wa_fieldcat-col_pos = 2.
      wa_fieldcat-fieldname = 'JOBNAME'.
      wa_fieldcat-seltext_m = 'Job Name'.
      wa_fieldcat-tabname = 'I_OUTPUT'.
    wa_fieldcat-reptext = p_reptext.
      APPEND wa_fieldcat to t_fieldcat.
      wa_fieldcat-col_pos = 3.
      wa_fieldcat-fieldname = 'LINE'.
      wa_fieldcat-seltext_m = 'Job Log'.
      wa_fieldcat-tabname = 'I_OUTPUT'.
      APPEND wa_fieldcat to t_fieldcat.
    endform.                    " SET_FIELDCAT
    Edited by: venkata on Aug 12, 2008 4:13 PM

    solved

  • How to convert sap script to pdf and send it as email attachment

    hi,
    my requirement is to convert a standard sales order form to pdf and send it as email attachment. get me some sample code for the same
    thanks in advance

    Hi
    See this sample code and after that use the fun module to send the mail
    SO_NEW_DOCUMENT_ATT_SEND_API1
    REPORT zzz_jaytest .
    Types Declaration
    TYPES : BEGIN OF ty_pa0001,
    pernr TYPE pa0001-pernr,
    bukrs TYPE pa0001-bukrs,
    werks TYPE pa0001-werks,
    END OF ty_pa0001.
    Internal Table Declaration
    DATA : i_pa0001 TYPE STANDARD TABLE OF ty_pa0001, "For pa0001 Details
    i_otf TYPE STANDARD TABLE OF itcoo, "For OTF data
    i_content_txt TYPE soli_tab, "Content
    i_content_bin TYPE solix_tab, "Content
    i_objhead TYPE soli_tab,
    Work Area Declaration
    w_pa0001 TYPE ty_pa0001, "For pa0001 Details
    w_res TYPE itcpp, "SAPscript output
    "parameters
    w_otf TYPE itcoo, "For OTF
    w_pdf TYPE solisti1, "For PDF
    w_transfer_bin TYPE sx_boolean, "Content
    w_options TYPE itcpo, "SAPscript output
    "interface
    Variable Declaration
    v_len_in TYPE so_obj_len,
    v_size TYPE i.
    Constants Declaration
    CONSTANTS : c_x TYPE c VALUE 'X', "X
    c_locl(4) TYPE c VALUE 'LOCL', "Local Printer
    c_otf TYPE sx_format VALUE 'OTF', "OTF
    c_pdf TYPE sx_format VALUE 'PDF', "PDF
    c_printer TYPE sx_devtype VALUE 'PRINTER', "PRINTER
    c_bin TYPE char10 VALUE 'BIN', "BIN
    c_name TYPE string VALUE 'C:\ZZZ_JAYTEST.PDF',"Downloading
    "File Name
    c_form(11) TYPE c VALUE 'ZZZ_JAYTEST'. "Form Name
    START-OF-SELECTION.
    Selecting the records from pa0001
    SELECT pernr bukrs werks FROM pa0001
    INTO TABLE i_pa0001 UP TO 10 ROWS.
    Setting the options
    w_options-tdcopies = 1 ."Number of copies
    w_options-tdnoprev = c_x."No print preview
    w_options-tdgetotf = c_x."Return of OTF table
    w_options-tddest = c_locl."Spool: Output device
    Opening the form
    CALL FUNCTION 'OPEN_FORM'
    EXPORTING
    form = c_form
    device = c_printer
    language = sy-langu
    OPTIONS = w_options
    IMPORTING
    RESULT = w_res.
    LOOP AT i_pa0001 INTO w_pa0001.
    Writting into the form
    CALL FUNCTION 'WRITE_FORM'
    EXPORTING
    element = 'MAIN'
    window = 'MAIN'.
    ENDLOOP.
    Closing the form
    CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
    RESULT = w_res
    TABLES
    otfdata = i_otf
    EXCEPTIONS
    unopened = 1
    bad_pageformat_for_print = 2
    send_error = 3
    spool_error = 4
    codepage = 5
    OTHERS = 6.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    Converting OTF data to single line
    LOOP AT i_otf INTO w_otf.
    CONCATENATE w_otf-tdprintcom w_otf-tdprintpar
    INTO w_pdf.
    APPEND w_pdf TO i_content_txt.
    ENDLOOP.
    Converting to PDF Format
    CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
    EXPORTING
    format_src = c_otf
    format_dst = c_pdf
    devtype = c_printer
    CHANGING
    transfer_bin = w_transfer_bin
    content_txt = i_content_txt
    content_bin = i_content_bin
    objhead = i_objhead
    len = v_len_in
    EXCEPTIONS
    err_conv_failed = 1
    OTHERS = 2.
    v_size = v_len_in.
    Downloading the PDF File
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    bin_filesize = v_size
    filename = c_name
    filetype = c_bin
    TABLES
    data_tab = i_content_bin.
    If you r using this function module check it once....
    call function 'CONVERT_OTF'
    EXPORTING
    format = 'PDF'
    max_linewidth = 132
    IMPORTING
    bin_filesize = v_len_in
    TABLES
    otf = i_otf
    lines = i_tline
    EXCEPTIONS
    err_max_linewidth = 1
    err_format = 2
    err_conv_not_possible = 3
    others = 4.
    Fehlerhandling
    if sy-subrc <> 0.
    endif.
    or u can use the standard program RSTXPDFT4 to download the script into PDF format onto a particular location
    follow this link for sample program.
    http://searchsap.techtarget.com/tip/0,289483,sid21_gci1121833,00.html
    check...
    How to send smart form via email
    /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
    Regards
    Anji

  • Simple Q. how to store/publish acrobat form and "return" as email attachment

    New to acrobat.com and wondering if this can be done (with acrobat.com).
    I have roughly 20 acrobat forms that I want to be accessible on the internet for about 5 specific people to access via the internet. The goal would be for them to click on the acrobat form, fill it out and then "return" it to me as an email attachment. The forms are not complex or long, typically 5 questions to respond to.
    So, I signed up for the free buzz option, uploaded a pdf form and saved it in a shared workspace. I see the file (test.pdf) in the all files section. The downward-pointing triangular arrow next to the file gives me the option of open vs download vs share among other choices. I really just want to open, but when I try that it says"this file is a pdf form. Please download the file and use adobe reader to fill out the form and submit your responses". I then click download it then asks for a location (this will be a problem-source of confusion). I save it to a location but that location already has that file and wants to  overwrite it-another problem. I quickly see that this is the wrong solution for me.
    So, can this be done with acrobat.com or should I be using something like dreamweaver and a personal web site? Thanks in advance.

    Hello there,
    Thank you for your post. What you would like to do is most easily achieved using Acrobat desktop software; this is a well-defined workflow, using Acrobat.com to distribute forms and collect responses, and deliver these responses to the Acrobat Tracker, where you can then analyze them and sort the data. If you're on a Windows machine, I recommend downloading a free 30-day trial of Acrobat Pro software, which you can get here:
    http://www.adobe.com/products/acrobatpro/tryout.html
    (Unfortunately, there is no trial available for Mac at this time.)
    Beyond that, there really isn't a more streamlined way to collect form responses with Acrobat.com; the Acrobat workflow works very well, however, and I encourage you to give it a shot. Here's a video that illustrates how it works:
    http://www.adobe.com/designcenter/video_workshop/?id=vid0348
    Please let me know if you have any further questions about Acrobat.com, and I will be happy to answer them for you.
    Best regards,
    Rebecca

Maybe you are looking for

  • Multiple day events

    I exported an .ics event from my work calendar and e-mailed it to my Mac at home. It was a vacation starting on Fri 12/18/2009 at 6:30 (when I start my work day), and ending on Mon 12/21/2009 at 3:00. My wife and I share our iCal via our .mac account

  • PNG images not displaying in Safari iPad

    Hi all, We have developed a webpage that loads PNG images in a div that can expand / reduce. The issue i cant seem to solve is why the PNG images do not load on Safari iPad. They just display as blue question marks. However not an issue with PC brows

  • Message Interface for HTTP to JDBC synchronous scenario

    Hi Experts, Could you please explain the Message Interface from the below blog. Actually, I am confused with the Outbound Interface. Is it correct? /people/siva.maranani/blog/2005/09/16/xi-how-to-on-jdbc-receiver-response 1. LoginData_Sync_OUT_MI Inp

  • Db table for Item Type Text content

    Can you point me to the db table(s) that store(s) the text value entered via the rich text editor? Thanks.

  • How can I add new/changed passwords to the 'save password'feature?

    I recently change an important password. Firefox didn't prompt me to 'save' it. Is there anyway I can add it or any other 'non saved' passwords to the existing list. If not, why not ?