Elements 9 w/ RAW converter 6.5 will not convert files from Canon S100.

Elements 9 with upgraded RAW converter 6.5 will not download (or convert) files from my Canon S100.

Thank you for the reply.  I have struggled with this problem for about 6 weeks.  Got bum information from both Canon and Adobe.  Grew discouraged.
As a “test” after reading the discussion, I downloaded the trial version of Elements 10.  It contained RC 6.6, which would not do the S100.  I “updated”
to 6.7 which finally did the job.  I’m really curious as to why the download of Elements 10 doesn’t “ship” with the latest RC?  I guess just to maintain
confusion for as long as possible.
Thanks again.  Only your reply enabled a final solution.
Graden Harger
Houston

Similar Messages

  • Convert files from Canon C300

    Hi,
    I want to convert files from Canon C300, but i can only import one by one file. Is it possible ti import all in the same time?
    The Canon C300 files are encapsulated, i just have access to MXF file when i open folder by folder.
    I'm in iMac, Yosemite.
    Thanks,
    Lise

    Thank you for the reply.  I have struggled with this problem for about 6 weeks.  Got bum information from both Canon and Adobe.  Grew discouraged.
    As a “test” after reading the discussion, I downloaded the trial version of Elements 10.  It contained RC 6.6, which would not do the S100.  I “updated”
    to 6.7 which finally did the job.  I’m really curious as to why the download of Elements 10 doesn’t “ship” with the latest RC?  I guess just to maintain
    confusion for as long as possible.
    Thanks again.  Only your reply enabled a final solution.
    Graden Harger
    Houston

  • Will not print files from mobile phone says it **may have** a virus- and deletes the file

    My HP photosmart premium with wireless ePrint, will not print files from mobile phone says it **may have** a virus- and deletes the file?!? My Fiance has the same phone, and I used it. It completed the file??? If I text message and E-mail address, my cell phone will come up as and E-mail address... has anyone else had this issue? Is it because I texted the the file? It didn't seem to be and issue on any of the other mobile phones used.... I am out of answers.... I tried to E-mail as well...
    Thanks in advance

    I have nearly the same problem, the printer discards my print job even when i have entered my email address as authorised senders.
    Details from my other post:
    I sent 2 emails to the printer:
    - one is a 3 lines of text and numbers in a GIF file sent as an attachment
    - another is a jpg circuit diagram paste in a word doc sent as an attachment
    both are classified as spam and refused to print. i have no email coming back saying it failed (even i have checked "Email Job Status" in ePrint Settings.
    So what will this HP printer print?
    How can I switch this useless spam filter off?
    I have get this filter off! I need this email printing to work reliably, that is a major reason I bought this printer
    Any suggestions are welcomed...
    HP's slogan on the box:
    "Now you can print from virtually anywhere" (but get discarded every single time!)

  • Photoshop CS4 Extended will not open file from Bridge.

    This is 2nd time this has occurred.  Last time I uninstalled CS4 and re-installed to fix it.  Prefer to not do that again.
    System: XP Media center, SP3,  3 GB memory, Athlon 64x2.  Generic - motherboard graphic card.  18 GB disk space remaining.
    Typical work flow is edit DNG files in Lightroom.  Once done, select DNG files in Bridge and under Tools run the Photoshop Image Processor which changes color profiles, sharpens and converts to JPEG and saves.  Done this probably a thoudand times.  Ran a batch Sunday afternoon fine.
    I may have interrupted an Image Processor batch that was just starting and glitched something.
    Now Bridge will open Photoshop but nothing gets imported with the Image Processor.  Also Bridge will not run a Batch.  Bridge will open Adobe Raw for editing a DNG but cannot load it into Photoshop.
    Once I try any of these things, Photoshop will usually not close/exit and many menu items are shaded out.  For example, opening a file or starting a new file is not available.  Activate/Deactivate not accessible.  Can Deactivate and Activate through InDesign. Photoshop seems OK otherwise if re-started after re-boot.
    Any ideas?
    Thank you.

    So far, no good.  Here is what I have done and current symptoms.
    1) I backed up all the settings and workspace files, then deleted them.  No change.
    2) No matter what I do, everytime I hold down the control, alt and delete keys when starting PS CS4 all I get is the Windows start settings "Adobe Photoshop CS4 Properties" box where you can select "Target" and "Start In" paths.  I do not get any dialog or confirmation to reset anything.
    3) Bridge successfully reset preferences using the Control key while starting it up.
    Everything about Bridge has appeared to function corectly before and after these changes.  But when the Tools/Image Processor or Batch is called, it starts Photoshop OK but nothing in imported to be processed.
    Photoshop opens (either from import or stand alone start) with menus partially functioning.  Under the file tab, nothign important works.  Cannot open a file, cannnot start a file, cannot exit - all grayed out.  But keyboard shortcuts do work and I can open a file or start a new file using the shortcuts.  Once I get a file open with the keyboard shortcut, most of the menu functions come back under the file tab and can be used and can exit PS.  The "X" in the upper right corner to close the program still remains greyed out and not functional.  The Activate/Deactivate options under Help remain grayed out.
    4) I deactivated the Suite from within InDesign and the I uninstalled only PS using the Windows uninstall utility.  I reinstalled PS from the CS4 Suite which of course reinstalled Bridge and some other utilities.  I reactivated from within InDesign and ran all updates from within InDesign since updates were still grayed out in PS. Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.)
    Problems still exist as described.
    5) Finally I deactivated again from within InDesign and re-installed the whole CS4 Suite without uninstalling anything before hand. I noticed that process did an uninstall before each module was re-installed.
    Problems still exist as described above.  I did notice that Photoshop showed itself still Activated (but grayed out) in the help menu even though I had previously deactivated the suite before the re-install.  Ran complete Updates from within Bridge.  Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.) but continued on. Everything else updated OK.
    I looked through the registry settings for the settings path as noted in referenced forum links and all looked correct.
    Additional Notes:  I installed the OnOne Plugin Suite 4 a few weeks ago.  Everything has run smothly since then until this problem poped up.  After the Uninstall/reinstall the OnOne menu option appears as normal.  As do my old Nik plug ins.  I doubt this has anything to do with the issue.
    Any more ideas outside of starting all over on a clean drive/machine which I really dread even contemplating?
    Thank you.

  • Windows 8.1 will not copy files from intranet site.

    I am using Windows 8.1 and I am trying to copy files from an Apple Time Capsule disk to a local hard drive. First I got the message box that said "Your Internet security settings suggest that one or more files may be harmful. Do you want to use it
    anyway?" and when I said okay nothing would copy. I went into my Internet options and added the Time Capsule disk to my site list in the Local Intranet Zone and reconnected the shared drive. Now I don't get the error box but it doesn't copy
    anything either. It does nothing. Any suggestions would be appreciated.
    Benjamin Greco Jr.

    I suggest you to run a malware check.. 
    May be its due to this malware "ZeroAccess rootkit/Sirefef"... What it does is it will block downloading and it will block you from visiting to some site... 
    Download and transfer this....
    Use one scanner at a time
    Download hitman pro 3.7  from uninfected pc and transfer to you pc and install (shareware and can be activated for 30 days free)and have a
    full system scan.. http://www.surfright.nl/en 
    alternatively you can use hitmanprokickstart usb bootable
    http://www.surfright.nl/en/kickstart
    And/or
    use malwarebyte  downloaded from uninfected pc and transfer to you pc and install and have a full system scan http://www.malwarebytes.org/products/malwarebytes_free/
    And/or
    use adwcleanerand  downloaded from uninfected pc and transfer to you pc and install and ave
    a full system scan..http://www.bleepingcomputer.com/download/adwcleaner/dl/125/)
    And/or
    use Junkware Removal  Tool  downloaded from uninfected pc and transfer to you pc and install andhave a full system scan
    http://www.bleepingcomputer.com/download/junkware-removal-tool/dl/131/
    And/or use TDSS Killer  downloaded from uninfected pc and transfer to you pc and
    install andhave a full system scan..: http://www.bleepingcomputer.com/virus-removal/remove-tdss-tdl3-alureon-rootkit-using-tdsskiller
    additional info
    If everything fails, you can use offline bootable resccue cd and do a full system scan... 
    https://support.kaspersky.com/viruses/rescuedisk
    http://windows.microsoft.com/en-us/windows/windows-defender-offline-faq
    How to create a defender offline bootable cd/pendrive
    http://www.pcandtablet.com/windows-8-antivirus-and-security/546/how-to-create-a-windows-defender-offline-usb-stick-to-remove-malware-on-windows-8-a.html
    Hetti Arachchige V Aravinda | Network & System Administrator (B.Sc, Microsoft Small Business Specialist, MCP, MCTS, MCSA, MCSE,MCITP, CCNA, CEH, MBCS)

  • Final cut will not ingest files from drhd100

    Has anyone had a chance to ingest media using the Focus Enhancements drhd100. If so I could really use their help on getting my system to ingest it. I'm not convinced that Apple has the setup properly I know that you can ingest with p2's and sony hddrive but I don't think they've tested focus jvc's

    So here is an update per my conversations with both Apple and Focus- the manufacture of the JVC proHD DRHD100 Portable HDD.
    "IT'S JUST NOT AVAILABLE!"
    At this point neither apple nor Focus have the ability to communicate efficiently between one another.
    By efficient I mean, whether it be apple or focus who takes the lead, I don't care, but someone needs to this is a huge problem. I suspect that the burden should lie with Apple seeing how the media ends in final cut, but that is just my opinion.
    Enough ranting and raving, back to the point.
    Apple doesn't have the necessary metaData file structure setup to import or ingest the HDV codec created to read the span clips generated from this medium as a single capture. (Firestore or proHD DRHD100, etc.) The newly released update to the ProHD driver will allow 60p but then it has no way to collace the spanned clip back together. That Functionality in FCP is there only for the Panasonic P2 cards, for now. Same issue in my opinion as Sony not, being able to import/ingest from the Sony HDD Cams and its .m2t files.
    Regarding transport stream in .M2T I've spent alot of time on this and it's a dead end. There is no codec currently that will transfer .m2t with proper timecode to .mov. I'm hoping a programmer out there will take up the challenge.
    About the only way to work with the .m2t would be to use a software like GrassValley's Canopus editing or Sony Vegas. But that's a waist of my time and Money. To use those software only as converters. Urgghhhhssh@#$$
    So I'll end by saying good luck and if I'm lucky and persistent maybe I can guilt trip Apple into building the first universal log and transfer window for an NLE. That's what needs to happen, a window similar to what Log and Capture provides for the tape medium, FCP or someone needs to build that for the HDD MEDIUM and optical Medium. Who knows maybe they already have that for the sony optical, but those cameras are out of my price range anyway, so I couldn't care less if those can be read into an NLE system.
    Thanks
    J.

  • I have photoshop elements 10 with all updates but it will not import raw files from my sony rx100

    Can anyone help. I have adobe elements 10 with all updates but it will not import .arw (raw) files from my sony rx100

    Sony RX2 is supported in ACR7.2 and higher whereas PSE10 can go as high as ACR6.3
    Thus you wont be able to open your raw files directly into ACR. You might want to download DNG convertor(version 7.2 or higher) and use it to convert your raw files to a different raw format (.dng) which is supported by all ACR versions.
    Windows download click here DNG Converter 7.2
    Mac download click here DNG Converter 7.2
    You Tube click here for DNG Converter tutorial
    Curtsey of 99jon

  • I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

    I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

    You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

  • Elements 11 bypassess raw converter when downloading from D610

    Elements 11 bypassess raw converter when downloading from D610

    The D610 is too recent to be supported by PSE11. It needs ACR version 8.3.
    Three choices:
    - upgrade to PSE12 and upgrade to 8.3 from the Help / upgrade menu
    - use the free Adobe DNGconverter to batch convert your nefs into the Adobe raw DNG format which PSE11 can read
    - use the Nikon supplied converter to produce tiffs for Elements editor.
    http://forums.adobe.com/thread/1030798?tstart=0

  • Can elements 13 open raw files from Canon 70d?

    Can elements 13 open raw files from Canon 70d?

    PSE8 can't be updated but you can download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the DNG files will open in PSE8(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.3
    Mac download (.dmg file) click here DNG Converter 8.3
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • How can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

    how can I work the raw file from Canon 5D MkIII in Photoshop Elements 9?

    You can download the 7.1 DNG converter to make copies of your canon raw files in the adobe dng format, which can then be opened in pse 9.
    As said above the the latest camera raw plugin 6.5 for pse 9 won't open those files directly, but will open the the converted dng files.
    windows:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5389
    mac:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5388

  • I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

    I have Photoshop Elements 9. I downloaded the plug in 6.0 and it works on the RAW files from Canon EOS 60D, but not with Canon EOS 70D. I cannot download higher versions of plug in, because I have Windows Vista and it is not supported.

    You could try using the DNG converter 8.7 on Windows vista:
    <Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7>
    <Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7>
    You then need to watch this video to get hang of it:
    <Camera Raw: How to use Adobe DNG Converter - YouTube>
    Hope this helps.

  • Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

    Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
    Where can I read about it on Adobe web site?
    I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • DNG converter not converting RAW files from Canon 70D.

    DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

    hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
    in any case, cr 8.2 or better is able to convert your camera's raw files.  why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

  • Camera Raw 5.7 Update will not install

    I have a MacBook Air with Bridge 4. The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?

    The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?
    You can also install it manually.
    Be sure to have the latest download, then open the DMG file (should do so automatic) and grab the plug in file to drag it in the correct place.
    This is the path:
    Library (That is on root level, not your user account library!) / Application Support/ Adobe? Plug-ins / CS4 / File Formats.
    In this folder should only be one version present and it is called "Camera Raw.plugin" Under info it should say version 5.7.

Maybe you are looking for