Elements 9 will not print to my HP Photosmart Premium C410.

Elements 9 will not print to my new printer. When i try I get the "send a fax" page. PS sends the job to the print spool for the fax. When i select the printer in the print page it sometimes tell me it can't print until I install a printer. Only way to change that is to close PSE and then reopen but still no printing. Does anyone have any ideas?

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

Similar Messages

Elements 11 will not print with Epson R2000?

Cannot make Elements 11 work with new Epson r2000 printer. Prompt on screen states it is not compatible or settings are not correct. Epson tech support worked on it, said to contact without success, said to contact Adobe. Printer works fine on all other applications. Help please.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

frustrated! photoshop elements 13 will not print to my new epson wf-7620 error message;default printer could not be opened

I haven't been able to try this fix, but someone emailed me the below fix:
I had same problem.Elements13 would not open my new default printer, but worked ok on four other versions of Elements. No help from Adobe, after three days of searching & phoning adobe , I found out by:- Going into Elements 13, Press Edit button, down to "Preferences and across to general. Press the "Reset Preferences on next launch". I then suggest you go through each section to make sure that your chosen preference are still ticked/checked in.
It worked for me. Hope same for you.
I'm planning on trying this fix soon. Let me know how it goes for you if you get to try it before me. Will do the same. Thanks,
Chad

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Photoshop Elements 11 Will not print?

Photo shop Elements 11 suddenly will not print to any printer or .pdf generator, worked fine for months, suddenly will not print anything?

Suggest that you reset preferences:
http://www.youtube.com/watch?v=-loowrOtvVk

Problem with printing to a HP Photosmart Premium C410

Printer purchased and installed on July 9, 2011. Connected wirelessly to a D-Link Xtreme N GIGABIT Router Model DIR-655. Router IP address 192.168.0.1
The printer worked fine until last week. Then one of our Laptops could suddenly not print or scan anymore.
There are Two Dell Laptops connected to the same router.
The first Laptop, Dell XPS M1530 running Windows Vista Home Premium Service Pack 2, 4GB Ram 32 bit OS. This machine can print to HP C410 printer directly with no problems. It can see the printer’s embedded web server at 192.168.0.254 and can scan from there into a file on the laptop or can print the just scanned image from the embedded web server. It can also print to it using HP eprint.
The second Laptop, Dell Inspiron M1545 running Windows 7 Home Premium Service Pack 2, 3GB Ram 64 bit OS. This machine CANNOT print directly to the HP printer. It can see the printer’s embedded web server at 192.168.0.24 and can scan from there into a file on the laptop (I used a PDF format and brought it up in Adobe Reader to be sure) but it CANNOT print the just scanned image from the embedded web server. The print process fails and shows the document still in the spool queue with an error status. It can print to the HP C410 using HP eprint.
I have used the HP suggested process of uninstalling all the printer software and re-installing it from the original CD (tried this three times) and by downloading it from www.hp.com. I have also installed the HP fix titled: Following a Network Installation, the Product Loses Functionality and Is Missing from the Devices and Printers Menu after the Computer Is Restarted in Windows 7 (64-bit Only)
I installed the fix after a complete un-install / re-install cycle. I have run the HP Print Diagnostic Utility at this point in the process and it returns a clean (All Green Check Marks) report but its final test print fails in the same manner.
Thanks in advance for help in solving this problem.

So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

Elements 9 will not print due to "program error"

Running Windows 7 - 64bit, 4GB memory. Have printed photos successfully. Recently added ICC profiles. Programs fails to print with either of 2 printers. Each printer will print happily with another photo editor. Tried uninstalling and reinstalling EL9, did not help. Any ideas?

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

Photoshop Elements 9 will not print a photo & usually locks up

I bought Photoshop Elements 9 threeyears ago when I upgraded to a Win 7 computer. I have NEVER been able to print a photo!!! Program tells there is no printer then just locks up & closes.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Elements forum, where you'll get more specialized help.

Can you print from DOS with Photosmart Premium C410 a ?

Installed printer but cant print from DOS.Can this printer be used to print from DOS Works fine printing from Windows XP
Thanks

First, AirPrint is not something you buy. It's built into iOS.
Second, John asked if you could print from an iPad with a cable:
Can you print from an I pad with a cable?
Third, in your reply to me, you said "you can" which would imply that one can print from an iPad via a cable, which again cannot be done.

PDFs will not print on HP All-In-One C309a

PDF files and only PDF files will not print on my HP Photosmart Premium All-In-One C309a. I can not print PDFs that are online or that are on my hard-drive. I sometimes use the 'print to XPS file utility' and then open and print the XPS file with no problem.
When I try to print a PDF file, the printer makes all the noises it makes when printing normally, but does not print. The viewing winding says "Now Printing", a piece of paper cues up, the audio cue plays meaning job completed and eventually a blank piece of paper comes out.
I am using Windows XP with Service Pack 3.
FreddieVee

Is your printer still in warranty? You can check with HP's warranty tool here.
The printheads in the Photosmart 6510 are not removable. I will ask to have an HP support agent to look in on this thread, they may be able to suggest some further troubleshooting.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Elements 11 will not work with Epson r2000 printer

Cannot make Elements 11 work with new Epson r2000 printer, works with all other applications. Epson tech support could not fix, said problems was with Elements 11. After making all settings including having Phtoshop manage color and turning off color management in printer, receive Photoshop prompt stating "printer is not compatible or printer settings are not correct. Need help, thank you.

Thanks again.
Richard
Date: Thu, 12 Sep 2013 08:49:39 -0700
From: [email protected]
To: [email protected]
Subject: Elements 11 will not print with Epson R2000?
    Re: Elements 11 will not print with Epson R2000?
    created by A.T. Romano in Premiere Elements - View the full discussion
Ollie37
Thanks for the follow up.
Barbara Brundage in the Photoshop Elements Forum will probably have the answer to your Photoshop Elements Epson scanner issue. Look into that Twain driver. She will give you good input on all this.
Also, see your other thread about Adobe telephone contact information. I have posted in that other thread also.
ATR
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5676121#5676121
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5676121#5676121
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5676121#5676121. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My /Quicken 2008 will not print

I recently got a new HP PC. It has Windows 7 on it. I have Quicken 2008 that will not print on my HP Photosmart 7350 series printer. It will print other stuff but not the Quicken data. What can I do different?

Try installing a generic driver for printing from Quicken only.
===Step one: Determine which port the current HP product uses===
a. From the Windows taskbar, click the Windows icon/Start button.
b. In the Start Search box, type control printers and then press Enter . The Printers window appears.
c. Locate the HP product in the list of printers, right-click the HP product, and then click Properties .
d. Click the Ports tab and write down the name of the port that has a check mark in the box beside it. This is the port to which the current HP product is printing.
e. Click Cancel to close the Properties dialog box.
===Step two: Add an HP Deskjet 990c default printer===
a. In the Printers window, click Add a printer .
b. Under Choose a local or network printer , click Add a local printer and then click Next .
c. Click Use an existing port , click the down-arrow ( ) to the right to select the port identified in Step one, and then click Next .
d. Under Manufacturer , locate and click HP .
e. Under Printers , locate and click hp deskjet 990c and then click Next .
f. In the Printer Name box, change the name of the printer if you'd like to.
g. Continue the wizard and select the preferred options, and then click Finish .
Try printing to this new printer icon you created and see if it helps.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Elements 8 Editior will not print !!

I am extremely annoyed at Adobe as Elements Editor (8.0) will not print!! I have seen a number of complaints about this and I have tried multiple things to fix the problem. I own many different Adobe products (Design Suite 5, Reader, Acrobat, Elements) as well as many other programs (Office 03, 07, and 10, Corel Suite of products, many photo related programs, etc.) and they all work fine on all te printers attached to my computer. Even Elements organizer works perfectly.
With the Elements Editor I get an error box that starts with “Before you can perform printer-related tasks such as page setup or printing a document you need to install a printer”.
Another post to this forum suggested using the Microsoft XPS document writer print driver. I tried that and it did get me a bit farther in that I finally was able to get the print dialog box up; however, whenever I selected another printer I got an error message telling me there was a fatal program error and I had to eventually quit and re-start elements.
I have looked for Elements updates – and none are available. Someone suggesting re-loading the program and I really do not want to do that as the program works perfectly (as dies the organizer) except for printing. I have recently updated the print driver so that cannot be the problem and as I said – you can print directly from the organizer.
To make matters worse I got so frustrated looking for a web address or e-mail for sending my complaint to Adobe that I gave up – none could be found.
Can anyone let me in on the secret as to how to print, or get the editor to recognize the printer, from Elements Editor?
Thanks – Mike

Mike,
You state: " I have recently updated the print driver so that cannot be the problem and as I said – you can print directly from the organizer."
I have been led to believe that the print engines for Editor and Organizer are not the same, even though they are marketed within the same program. It may be that the driver for the printer antedates the production of PSEv.8.
Have you tried using another printer (of recent vintage) for printing from Editor?

Elements and PDF's will not print to my HP officejet 6500

when i got the printer, it printed from adobe programs, then after a while it stopped printing, just going to the fax option, have spoken with HP and downloaded up to date drivers, and it prints from all other programmes with no trouble, just still will not print from adobe programmes ????!!!!???

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

Organizer will not print

I'm trying to print a photo package, but Organizer will not print - It keeps popping back to the Elements print screen. What's the fix?

This occurs frequently with HP printers, though others are implicted as well from time to time
In Control panel>Devices and printers, right click your active printer, go to Printer Properties, and rename the printer to something short, e.g. my printer
http://kb2.adobe.com/cps/865/cpsid_86566.html

Elements 9 will not print to my HP Photosmart Premium C410.

Similar Messages

Maybe you are looking for