Elements are not displaying in webdynpro view's layout area

Hi All Webdynpro Experts,
Im new to abap.  Im working in webdynpro.
Im facing a issue now.
By Default, I need to disable a button (u201CCreate Responseu201D) in FPM_OIF_COMPONENT WebDynpro component in CNR_VIEW. But the thing is I cannot see the any elements in the layout area.
The component configuration is /SAPSRM/WDCC_I_FPM_OIF_RFQ_BID. When I clicked this, itu2019s showing some attributes and one button called u201CStart Configuratoru201D. So now what should I do, to view the elements in the layout area. How to configure that component. So that I can set the disable attribute for create response button from the layout area itself.
Please help me in thisu2026
Thanks,
Rani.

Hello Rani,
when you have development rights for this component configuration, just click on the button "Start configurator". Afterwards the FPM Configuration editor is opened and you see the statically defined layout of the component configuration.
Basically the layout of FPM applications is stored within a configuration context, you have to go into the component configuration.
A customer e.g. could also do some customizing on sap delivered component configurations - this he will do in the so called admin mode. You can start this mode in several ways, e.g. when starting the FPM Configuration editor and just adding the URL-parameter sap-config-mode=X.
Further information on how to adapt FPM applications on the [SAP Help portal|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/6b/edc21e5e1e4a33a492b8955afffac7/content.htm].
Best regards,
Julia

Similar Messages

  • PreE V8: Clips not displaying in project view

    I have a clip in the my timeline/sceneline that is not displaying in Project view. It also does not have the "P" in the bottom corner of the thumbnail in Organizer view. Why isn't the clip considered part of the project?

    I have been shooting in XP+ mode and have been for the past year.
    I haven't tried using the Premier Elements Get Media function. I usually import both still images from one camera and the video from this camera at the same time into the same Photoshop album and use Organizer. Also there are some training videos and books that tell you to use Organizer.
    I tried importing a video file using the Get Media function and was able to use the set in/out points and have them saved correctly.
    Then in the project that I am working on I took one of video files that I imported through the Organizer and deleted it from the catalog. Then I imported it using the Get Media function and put it in the album with the other files. Then I used Preview to set in/out points. Those points were saved correctly.
    So know I will delete all the remaining video files from the catalog that I haven't yet used in my project and then remote them through Premiere's Get Media.
    So it appears that as you thought, I need to use Get Media to import video files. But that is not emphasized in any documentation. I think there should be a warning when importing video files in Organizer saying that if you intend to use Premier Elements to edit them that they should be imported via that product.
    Thank you for your assistance.

  • Firefox 33 HTML select elements do not display correctly

    HTML form <select> elements do not display options correctly in Firefox 33.
    For example:
    <select id="field_4" class="mainForm" name="field_4">
    <option value=""></option>
    <option value="submitted"></option>
    <option value="pending"></option>
    <option value="discarded"></option>
    <option value="all"></option>
    </select>
    should display a drop down with 5 elements (first one blank) but no elements at all are displayed.
    The bounding box does not seem to be computed correctly so no options display.
    I have observed this issue on multiple pages. These pages displayed correctly in older version of Firefox and they display correctly under IE. The problem occurs with no addons or additional themes installed. The problem does not occur in SafeMode so I suspect that it is theme related but the Default 33.0 theme is the only installed theme and it cannot be disabled outside of SafeMode. I tried installing and changing multiple themes without success. The problem persists after restarting Firefox and after rebooting the computer and even after uninstalling and re-installing Firefox.
    I can supply a screen shot if needed.

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Heading elements do not appear in design view

    Hello,
    heading (h1, h2 ...) elements do not appear in design view. anybody know how to fix this?
    btw seems like DW gets worse with each successive version.

    I really don't have any troubleshooting advice because I can't reproduce the problem and have not seen this problem being raised previously in the forums.
    If you have deleted the personal config file and cache and that hasn't helped, it may be time to uninstall and reinstall. 
    Also double check your computer for any viruses or malware etc.,
    Depending on what version you are using then, you may want to run the uninstall scripts to make sure you remove *all* files associated with the software and start from scratch.
    If you are having problems with Creative Suite 3, I would suggest using the CS3Clean script: http://www.adobe.com/support/contact/cs3clean.html
    There is a different version for Creative Suite 4: http://www.adobe.com/support/contact/cs4clean.html.
    WARNING: The CS3Clean and CS4Clean scripts remove from your computer EVERYTHING related with the CS3 and CS4 suites, apart from any documents that you have created using Adobe programs. Make sure you have your installation disks and serial numbers available for reinstallation.
    If all else fails, then you may need to contact Adobe Technical Support.

  • Design Window is not displaying the correct view

    Hi
    For some reason the Design View on my CS3 is not displaying
    the correct view.
    It used to show how the web page would look but it is simply
    showing up the wording and pictures surrounded by dotted black
    lines.
    I am using a template as a bases for all the pages and all
    the pages are showing like this.
    My other sites are showing up OK though.
    When I Preview in Browser, it all shows up OK.
    Can anyone help?
    Bezz

    VIEW | Style Rendering > Display Styles
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Bezz333" <[email protected]> wrote in
    message
    news:fttdsr$394$[email protected]..
    > Hi
    >
    > For some reason the Design View on my CS3 is not
    displaying the correct
    > view.
    >
    > It used to show how the web page would look but it is
    simply showing up
    > the
    > wording and pictures surrounded by dotted black lines.
    >
    > I am using a template as a bases for all the pages and
    all the pages are
    > showing like this.
    >
    > My other sites are showing up OK though.
    >
    > When I Preview in Browser, it all shows up OK.
    >
    > Can anyone help?
    >
    > Bezz
    >

  • Code not displaying in code view

    When searching for a particular feature, I may have clicked on something by accident. Now, my site looks and works fine in the browser and in design and live view, but the code is not displaying in code view.  See attached image.
    Anyone know how to fix this???  Thank you in advance!

    Have you tried restarting everything?

  • BPS Variable-Cost Element is not displaying Text

    Dear Team,
    We have a peculiar issue one of the BPS Variable defined for Cost Element is not displaying text in one of the Planning Layouts.
    Another variable is displaying text in another layout.
    Surprisingly...when I reused the old variable in the new layout it is also not displaying the text.
    Am I missing something....appreciated your quick support.
    Thanks & Best Regards
    Srinivas

    Have you check the layout Lead-Column setting? Is it set to 'Key/Description'?

  • Image UI element is  not displayed in Abap webdynpro application

    Hi Experts,
    I need your advice on below issue.
    I have created new ABAP Webdynpro application just to
    display employee photo.
    When loading the application, I generated a dynamic URL for
    a image in webdynpro application path in cache to map to Image UI Element. It
    is working well in DEV and QA environment. But it is not displaying when loaded
    in PRD system.
    Please suggest where to check the cache properties in system
    in order to resolve this issue.
    The user can access the application path, is there any chance for security issue in the same path?
    I suspect the URL is cleared before user access it, can it be controlled via any config?
    Looking forward for your valuable inputs.
    Thanks,
    Swetha

    HI Swetha,
    Maybe the image is not present in MIME repository for the PRD system.
    Please check.
    Regards,
    Hancila

  • Premiere Elements 9 Not Displaying Project

    Whenever I try to open my version of Premiere Elements 9, there is nothing to view. The same happens for any new projects that I would like to create. See the picture below for an example. Can someone please advise me on the problem and how to fix it?
    Thanks.

    alexsanc
    What computer operating system are you running Premiere Elements 9 and are you running the 9.0.1 Update version of the program?
    When did this problem start? Is this "it worked before but not now" or "it never worked before"?
    Have you double checked to determine if the problem exists with and without the antivirus program disabled?
    How are you getting to the view that you display in the screenshot?
    a. Have you set the project preset in the new project dialog, clicked OK, wait for the workspace to open, and get only what is shown in
    that screenshot?
    or
    b. Other
    The usual drill questions:
    a. Latest version of QuickTime installed on computer with Premiere Elements 9.0/9.0.1?
    b. Working from User Account with Administrative Privileges and Run As Administrator application applied?
    c. Video card/graphics card driver up to date according to the web site of the manufacturer of the card or the manufacturer of the computer?
    We can talk about deleting the Adobe Premiere Elements Prefs file and, if necessary, the whole 9.0 Folder in which it exists. But, for now, let us
    gather the information requested above. I will post the How To for this approach next. This may come to uninstall/ccleaner run through/reinstall.
    We will be watching for your reply.
    Thank you.
    ATR

  • Design view not displaying but code view is ok

    Hi Everyone,
    my design view in dreamweaver cs5.5 is not displaying anything but all the code is there and my page online is working fine http://www.exclusivewindowtint.com.au/car-window-tinting.html
    How can i fix this as easy as possible? this is only happening to this one page on my website.
    Thank You
    George

    I have to second  Murray on this.
    I will go a step further and say ignoring errors on your site because someone else's site has some is extremely poor advice, especially considering the volume of people visiting this forum alone with a random display problems that are solved by simply correcting the errors found in the validators.
    Restoring from a backup may work this time, but why did it work? That's where validation, and understanding what the validator is telling you, pays off. You somehow inadvertantly mangled your table code, will that ever happen again? What happens if your backup also has the same mangled code next time?
    Some validation errors are never going to affect display and can be completely ignored from a "how does this affect my design" point of view, like missing an alt attribute on an image for instance. Others, like missing or improperly nested html elements, can kill your design in browsers or rendering engines that can't handle major errors (like most versions of IE or DW's Design View) while everything looks fine in a browser better programmed to handle problems (like Chrome or Firefox).
    Bottom line is, the validators are extremely useful tools, do not ignore the  error report unless you understand which errors can be ignored.

  • My subscribed calendar does not display in today view in iOS7. Does anyone know how to make it show up?

    I have a subscribed calendar on my iPhone. The today view in notification center shows that I have an event at xxxx and tomorrow view says I have x events but the calendar day view does not display any of the events. I need this so I can easily see which rooms my events are in. Dows anyone know how to make the subscribed calendar show up in calendar day view?

    Interesting. May have uncovered a bug. It seems that limited duration events will display, but all day events wont on mine. (iPhone 5). Does that compare to what you are seeing (unfortunately, I have nothing in a subscribed calendar until the week end, so difficult to check. I do seem to recall seeing an event from one this past week end on the iPad, however).

  • TranslateMarkup output not displaying in design view

    Hi
    I'm trying to take a set of php pages which all follow a similar style
    <?php
    $p=new page();
    $p->rightCol=<<<RC
         SOME HTML GOES HERE
    RC;
    $p->mainContent=<<<MC
         SOME OTHER HTML GOES HERE
    MC;
    This then pulls in various other files (css, js etc) and renders on the website. I'm used to working with an IDE and hand-writing php code. My non-technical colleague would like to edit the html using WYSIWYG and is used to using DW. At the moment the html in the heredoc strings doesn't display in design view. I've been trying to rejig the pages using translators and can convert the above php into html which renders fine in a browser. The html output from the translateMarkup function doesn't display in design view. I think I'm probably fighting a losing battle (for instance I'm not sure how I'm going to make html editable in DW even if I can get it to render), but if anyone could explain why the html won't render I'd be very grateful. My translator is
    <html>
    <head>
    <title>Conditional Translator</title>
    <meta http-equiv="Content-Type" content="text/html; charset=">
    <script language="JavaScript">
    function translateMarkup(docNameStr, siteRootStr, docContent){
    //Find the right col stuff, delimited by <<<RC\n and RC;\n
    var regexRC=/<<RC([\s\S]*)RC;/;
    var regexMC=/<<MC([\s\S]*)MC;/;
    var rcContent = regexRC.exec(docContent)[1];
    var mcContent = regexMC.exec(docContent)[1];
    var ret = (getHeader()+'<main>'+mcContent+'</main><aside id="rightcol">'+rcContent+'</aside>'+getFooter());
    return ret;
    function getTranslatorInfo() {
      var transArray = new Array(6);
    transArray[0] = "LG_TRANS";
    transArray[1] = "Translates for LG";
    transArray[2] = "1";
    transArray[3] = "php";
    transArray[4] = "0";
    transArray[5] = "allFiles";
    transArray[6] = "50";
    return transArray;
    function getHeader() {
      return '<!DOCTYPE html><html><head><title>TEST</title></head><body>';
    function getFooter() {
      return '</body></html>';
    </script>
    </head>
    <body>
    </body>
    </html>

    unless there's any way of rewriting the files before upload and download (ie dynamically rewrite the php pages as html before dreamweaver opens them, then rewrite them back as php before they're uploaded - I'm clutching at straws).
    I believe that this should be possible but I'm definitely not a DW extensionologist so I couldn't say for sure. Also, I believe that the tricky part would be the last step -> WYSIWYG edits back to PHP, which may well be impossible.
    If you want to talk to someone who knows DW inside out, contact the guys at http://www.projectseven.com. They are excellent.

  • Forms created in Acrobat Pro XL do not display data when viewed on iPads

    I have a simple form that when completed and saved as an Acrobat Pro XL document and then emailed to customers, do not display the field contents of the form when viewed on iPads. So the customers just see a blank form. I have tried to use Optimize for Web and Moblie to solve this, but it appears that many times, since the iPads are so prevalent, that people can;t see the full content of the form that I send. Is there a solution for this?

    When your customers opened the PDF form (which was as an email attachment) on iPads, it is highly likely that Apple Mail (not Adobe Reader for iOS) was displaying the preview of the PDF form.   Please note that Apple products on iPad/iPhone (e.g. Apple Mail, iBooks, Safari) do not render field contents or annotations (sticky notes, highlight, underline, strikeout, freehand drawing, etc.) in PDF documents.
    The Mail sections of the following FAQ documents describe how to open PDF attachments in Adobe Reader for iOS.
    For iPad, see How to get PDF documents into Adobe Reader for iOS (iPad on iOS 7 version)
    For iPhone, see How to open PDF documents in Adobe Reader for iOS (iPhone on iOS 7 version)
    Please let us know if you have additional questions.

  • Files not displaying in list view?

    I recently upgraded my MacPro (early 2008 8core) from Snow Leopard (10.6.8)  to Lion.
    At first i wanted to do a fresh install on my machine but soon realised it wasnt possible to import old accounts from another internal drive so i opted to upgrade the system instead.
    After doing so I was faced with an odd problem of files not displaying in my finder windows when switching through internal drives or changing from 'file view' to 'list view' or 'column view' etc...
    The attached screenshots were taken in sequence youll also note that the path bar & top window name dont update either.
    The relevant drives are in healthy condition with several tests run over them to ensure their healthy(Disk Utility & Drive Genius). I have also run permissions repair, and a utility to empty cahces etc (OnyX). From what i can see its possibly something to do with the Finder not updating or refreshing the window? The issue seems to be isolated to the drives however intermittently the problem exists deeper into the directory on 'TerraTank' Volume.
    The finder also crashes semi-frequently and the problem seems to dispaear for a while and revealing the contents of these volumes for a few mins.
    I have also checked activity monitor to see if any particular process was going haywire and all seemed relativly normal.
    Has anyone else experienced this problem?
    Regards,
    JP

    Onyx may be causing problems.  Don't use it on a non-backed up system, as cleaning caches may damage them, and make things not work.    Make sure your Spotlight indexes all drives you wish to be searchable.  Go to Apple menu -> System Preferences -> Spotlight and add each hard drive to the Privacy section, and then remove it again.  Then click on the Spotlight menu every half hour to see when it stops saying that it is indexing.  It might take a few hours.  But once done, it should be fixed.

  • Page not displaying in outline  view.

    One of the pages in a site is not displaying in the outline view of CS2. Does this view have,, well different views. The page displays in source, preview, pdf preview & browser preview but nothing is displayed in outline. All other pages display in the outline view. I have closed the file, closed GL & rebooted but still views as blank just a flashing cursor top left. If I go from  outline to source the cursor is immediately after </body>. I am thinking that I am viewing after the body and seeing nothing.Thanks

    Hi,
    After opening NWDS  in Webdynpro explorer. Go to  Window-> show view and select outline.
    you will get the outline editor where you can desing the layout for the views.
    hope it helps you.
    Raghu

Maybe you are looking for