Elements does not recognise prel file

I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10

Chris (Herbie53)
There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
a. Put your DVD disc in the burner tray.
b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
We will be watching for your comments and results.
Thanks.
ATR
Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here.

Similar Messages

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE. How can I get my windows to recognise the .swf files to play them.

The downloaded file is the projector, not an installer; you need to make the file association manually:
move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
right-click on a swf file and select Open with > Choose default program
navigate to the folder you saved the player and select flashplayer_13_sa.exe

Aperture does not recognise TIF files from Nikon CoolScan

The TIF files from my Coolscan are good in every other application, but Aperture does not recognise them. I've tried re-saving the TIFs as JPG and PDS but Aperture doesn't recognise any file generated from the TIF. Maybe it's something to do with the scanner driver? Any ideas how to load these files into Aperture?

You might check the color space that is assigned to the files. If you are using Nikon Scan software to manage your CoolScan, there is a preference for setting the color space of the saved file. FWIW, Nikon CoolScan .nef files are a 'raw' file, not camera raw, that was/is a Nikon proprietary format for their scans. If you use the Nikon Scan for image editing, the edits are non-destructive in saved files and can be adjusted by re-opening the file in NS. Adobe first made editing camera raw available in early 2003 and the Nikon format preceded that. Nikon's camera raw format also has the .nef extension, but is not the same as the CoolScan .nef-- really confusing. I suggested checking the color space, because Nikon has different internal names for Adobe RGB(1988) as well as their own Wide Gamut space.
All said, I've not had a problem opening .tif scan files in Aperture.

Elements does not see some files

I have folders in which Elements shows fewer files than Windows Explorer, and I can open the files with Explorer that don't show up in Elements, and Elements does not see them when I try to reconnect or find them. Why does Elements not see some files, even when you try reconnecting?

I think I may have moved these files with Elements into a different folder, and then copied them back into the original folder with Explorer, so there are now two copies of the same files with the same names in different folders,
In this situation, PSE is most likely saying (in its very unhelpful way) that the file you're trying to import is a duplicate of one that already exists in the catalog. PSE considers a file to be a duplicate if it has the same name, size, and last-modified date/time.
If you want a duplicate of a photo in the catalog, select one or more thumbnails and do File > Duplicate.
What's the reason for wanting the duplicate photos in the catalog? There may be other ways of accomplishing your goal without making duplicates.

Facebook does not recognise iMovie file type

Hi all. I have successfully downloaded videos to Facebook this year, but have just upgraded to Lion from Snow Leopard and something appears to have changed.
When I try to "Share" onto Facebook, the Facebook interface does not recognise the movie type. I also notice that instead of each project showing in the "Movie Events" file as a thumbnail of the opening frame, it sits as an iMovie Icon, albeit with the project name.
I have successfully uploaded to Vimeo, so my question is: has something changed in iMovie after the upgrade to make the "project" indigestable to Facebook?

GR-Blitz,
You can see a few ways of doing it in this thread:
https://forums.adobe.com/message/6474423#6474423

Elements 7 does not recognise RAW files from my new camera

Have recently bought a new camera (Canon EOS 60d), which is an import. Whilst I can process Jpegs in Elements the RAW files are not recognised. Help

PSE7 is three years old, and camera makers are constantly changing the formats of the RAW images they use. There's no way for PSE7 to open those new RAW files, beause the latest version of Adobe Camera RAW is incompatible.
You'll have to use the Adobe DNG converter to convert the RAW files and then open the DNG files in PSE:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5375
Or you can purchase PSE10.
Ken

SD reader does not recognise .mov files

i am trying to import .mov videos from an SD card reader, the card reader is recognising the photos on the card but is not displaying the videos for import... Any suggestions ??

Guys,
I appreciate anyone who wanted to help me with the described issue. However, all the recommendations were just a scratch of bushes...
I decided to review more forums that discuss about Ricoh made flash media controller drivers and I hit the nail...
Thanks to a fellow who experienced the same problem but with other brand of laptop that uses Ricoh drivers.
I checked his recommendation and bingo - SD reader in T61 machine recognizes SDHC 8 GB my cards and everything works fine.
Before leading everyone to that site, allowing to download and install different version of Ricoh
flash media controller drivers, I will share my conclusion about Lenovo product. They integrated 3rd party drivers ( Ricoh ) into ThinkPad without recognizing or checking that their latest version 3.54.02 are good probably for MS, XD-picture and for MMC cards but does not work with SD ( however the device controller is named SD/MMC controller ).
The site where you may download the proper executable application file is http://asusg1s.wikidot.com/forum/t-9849
The file name is E1007029. I checked it, it does not contain any viruses.
This folder contains eleven files with a setup executable file. After setup completion you will find under IDE ATA/ATAPI Controllers new two devices named Ricoh SD Host Controller and Ricoh Memory Stick Controller ( I left undeleted previous
installed controllers as well - Ricoh SD/MMC Host Controller and Ricoh xD-picture Controller ).
The "new" installed flash media contoller drivers are Ricoh R5C841/842 version 2.43.02 and are for Windows XP environment. So this case can be closed.

AP3 does not recognise movie files from Sony HD camcorder

I tried to import footage from a new Sony HDD camcorder, Aperture uploaded the stills ok but couldn't upload the movies with an error message saying 'Unknow File Format'.
However iPhoto uploaded the movies no problem. The file format is .MPG
If anyone can offer any advice on what I need to change to upload MPG format that would be most appreciated. Thanks.

Are you sure the format is .MPG -- Sony HD camcorders are typically outputting AVCHD files, which Aperture does not read? Nevertheless, not sure if .MPG is supported either.
f you open Aperture Help and search on Video, you find the following:
File Formats You Can Import into the Library
Aperture supports most image, audio, and video file formats captured by digital cameras. An example of the file types and formats that can be imported into your Aperture library are:
• GIF
• JPEG
• JPEG2000
• PNG
• PSD (8- and 16-bit)
• TIFF (8- and 16-bit)
• BMP
• DNG
• RAW files from a variety of supported digital cameras
• AIF
• WAV
• MOV
Ernie

Why is Elements 12 not recognising raw files from my Nikon d5300

What am I doing wrong, the main reason I bought Elements 12 was to regcognise eaw files from my Nikon d5300

Hi,
You shouldn't need to use the DNG converter unless you are using the MAC app version. The D5300 should be supported by Camera Raw 8.3 which should be compatible with Photoshop Elements 12.
In the editor go to Help -> About Plug-in -> Camera Raw to see which version you have loaded. The latest for Photoshop Elements 12 is 8.5. If you have an older one then go to the Help menu and select Updates.
If you are up to date, then you may have use old Nikon software to access the NEF files and that is known to corrupt them so that Photoshop Elements can't read them.
Brian

I exported my settings from Illustrator CC. I then tried to import into Illustrator CC 2014. It says it does not recognise the file type ?!? What do I do to migrate my settings?

I have read through posts on this subject. I have looked as this to be the solution to have the same workspace that I had in the CC version, in the latest CC 2014 version. It hasn't worked.
I'm now sad =(

GR-Blitz,
You can see a few ways of doing it in this thread:
https://forums.adobe.com/message/6474423#6474423

Exported my video from Elements 12 but Powerpoint does not recognise the video file. How can we do it?

Exported my video from Elements 12 - format mp4 but Powerpoint does NOT recognise the video file. Why?

.wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest.

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera?

Why does iPhoto 9.4.3 not recognise RAW files from a Pentax K3 camera? It does from a K7.

Because it requires Mavericks - http://support.apple.com/kb/ht5955
OS X Mavericks provides system-level support for digital camera RAW formats from the following cameras.
Supported by Digital Camera RAW Compatibility Update 5.04*
Fujifilm X-E2
Fujifilm X-T1
Nikon D3300
Nikon 1 AW1
Panasonic LUMIX DMC-GM1
Pentax K-3
LN

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

Did you download the Basic/Free version?
I also thought the Trial period was as long as you needed!?
What is your Warranty and Return Policy?
You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
All sales are final and there are no refunds.
Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
http://www.hamrick.com/sup.html#q

IPhoto does not recognise the raw files(.NRW) from my new Nikon camera model P7100,any advice please as running latest version of iPhoto(9.2.1)

Since changing my little everyday camera to a new Nikon Coolpix P7100 iPhoto cannot import any of the raw files(.NRW),says it does not recognise them.
I have updated iPhoto to the latest version(9.2.1) but still cannot open them.
Any ideas please

The raw from the P7100 is not supported at this time.
The Raw from every model of camera is different. Note: that's every model not every brand. So, the NEF produced by a Nikon D40 is not the same as the NEF produced by a D60, the CR2 produced by a Canon 350 is not the same as the CR2 produced by a Canon 400.
Therefore the Raw for every camera model needs to be added individually. If yours is not supported then let them know you want it:
iPhoto menu -> Provide iPhoto Feedback

CS5 Bridge does not recognise Nikon D 800 Raw Files

I have Photoshop CS5 Version 12.0 (x64). Photoshop recognises Nikon D 800 Raw files BUT
Bridge does not. I have tried updates but my Apple Mac Pro does not recognise them

That would mean that you have the ACR plug-in version 6.7 or 7.1 in the wrong place.
You can only have one version of ACR anywhere in your installation. If you have two, it won't work. Look for the version(s) you have installed in Photoshop under the Photoshop menu > About Plug-In:
Your camera has been supported ever since ACR 6.7 and CS5 can run ACR 7.1 (but not any higher version of ACR).
The only correct path for the plug-in in CS5 is as follows:
Very wide image: click on thumbnail for larger view.
NOTE that the path starts with the ROOT LEVEL Library, the one right after the name of your boot drive, not your user or Home Library.
The screen shot is from an installation under Snow Leopard, where I had CS5.

Elements does not recognise prel file

Similar Messages

Maybe you are looking for