Elicense control error

Hello all. Everytime i try to start logic without my nexus license dongle i get the eLicense control error and logic refuses to start. The problem is that I do a lot of work in logic on the plane and in hotel rooms and don't always have my license key handy. I should still be able to work on that session and just not access those particular plug ins unless i have the key installed. I don't see why i cannot even get the session to open. Does anyone know a workaround for this. I am buying the uad satellite bundle and im sure im going to have the same problem with this. But my main goal is to be able to open any track and work on a particular part weather or not my license is plugged in. This is how it is in ableton. The session will open but i just cant access nexus or UAD. PLEASE HELP

Boyd Ostroff wrote:
I wonder if you could setup two separate accounts on your laptop and only install nexus on one of them? Not sure if the nexus software is installed into the user library or a global location, but seems like it would be worth a try.
Excellent suggestion....
If that doesn't work the OP could just move the Nexus AU out of the Components folder before starting an "on the road" session.
That would be in Root/Library/Audio/Plug-ins/Components
Logic never did have graceful exit strategies... if it finds something amiss it often tends to freeze or crash.

Similar Messages

Problems with Cubase LE 6 and eLicenser Control Center

This isn't strictly an Apple problem, but I thought someone might be able to help me!
I use Cubase LE 6 for my singing, and have never had problems before with exporting my audio tracks to MP3s. Today, however, I went to export my recordings and a box popped up saying I had to go over to my eLicenser Control Center and validate my usage licenses as they had expired. So I did this, apparently successfully (as seen in the photo attached), but then nothing seemed to change. The licenses remained in red, still 'expired' (since the 1st April), and I still can't export my tracks.
Someone please help! I've done what was asked but now am completely stumped. Music software is not my forte! But it is extremely frustrating!
Thank you!
Georgia

I just had this problem after installing Cubase on my retina mbp. The problem is the retinas higher native resolution that conflicts Cubase's inability to run the program at such a high resolution. To solve
If open, close Cubase
Go to Applications through Finder
Right click Cubase and select "Get Info"
Select the box "Open in Low Resolution"
Once you've done that, re-open Cubase. Although the interface is now a bit pixelated, Cubase should run fine now. If not, don't know what else to say, because it worked for me! Good luck.

How to control errors in BPM

HI all,
We are developing a quite complicated BPM. We need to controle errors in File Adapter, just in case the comunication channel cannot write/read (for example with a wrong FTP account). In case of error we need to send an email. So we are trying to develop a module in the file adapter. We are not sure about behaviour of the BPM if one of the steps have an error. I mean the execution of the module will continue the BPM in case of error in the file adapter?
Many thanks in advance
Regards
Noelia

Hi Noelia,
CCMS is SAP Computing Center Management System. RWB is smoothly integrated with CCMS and CCMS alerts can be viewed thro' the Runtime WorkBench.
First configure CCMS in XI System:-
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
For Monitoring in the CCMS:-
http://help.sap.com/saphelp_nw04/helpdata/en/4d/6272376d3bfa2be10000009b38f8cf/frameset.htm
Go thro' this link for configuration scenario:-
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Hope this helps.
Regards.
Praveen

Transaction Control Error

Hi,
i am getting "Transaction Control Error" in newly created Client while executing any tcode. can you please give the solution for this.
venkat

Hi,
i copied from 000 client to new client. it was successfully completed. After that if execute mm01 or mm02 transactions this type error i am getting. Can you please give the solution..
venkat

Error when re-starting an SQL Server Instance from VBA - [SQL-DMO]Service Control Error: Access is denied.

Our Application needs to have the use of the [Named Pipes] and [TCP/IP] Protocols. To save our Users the hassle of having to enable them manually our application has always done it for them and then stopped and restarted SQL Server. However
since the advent of Vista and Windows 7, the restart stopped working. We solved the problem by detecting the failure to re-start and giving Users sufficient instructions for them to do it themselves. Since this only occurs during installation on
the Server, this approach has not been too much of a hassle. However we would like to tidy this up if possible. This the VBA code that is causing the problem:
    obj_SQLServerInstance2.Start _
        g_SQL_UseWindowsAuthentication, _
        SQLServerInstance, _
        UserName, _
        Password
This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Does anyone know how to resolve the problem?

This still works when run under XP, but fails under Windows 7 with the Error:
[SQL-DMO]Service Control Error: Access is denied.
Hello Brian,
Under Windows 7 you have to run the VBA script with admin permission, a normal user don't have permissions to start/stop services.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How do I fix "could not be added to AVI control" error?

How do I fix "could not be added to AVI control" error? I get this error when loading a file via the Clip/Insight Player.

Hello acacord,
are you working with an AVI using the Indeo codec? On Windows XP, after
installing the service pack 2, files using this particular codec cannot
be played if they are placed in the temporary Windows folder. This is
due to Windows restrictions, not to CLIP.
If you run a cip file in CLIP, it would unpack all its content
(including the AVI) to that temp folder and play the video from there -
which is not possible.
With the current version, all CLIP examples are using the Radius codec
instead ov the Indeo. As you can see ich you make a test with one of
the example projects - it is working well.
So in your case, just use a different codec than the Indeo.
Ingo Schumacher
Systems Engineer Sound&VibrationNational Instruments Germany

ChiliBean Control error '800a03e8' java.lang.NoClassDefFoundError

hi all,
http://forum.java.sun.com/thread.jspa?forumID=759&threadID=5019680
in reference to the post above, i have a Win2003 server running Sun ONE with Chilisoft ASP plug-in. i did the suggestions there but am still getting the same error, to be exact:
ChiliBean Control error '800a03e8'
java.lang.NoClassDefFoundError: MyHelloWorld
/myhelloworld.asp, line 3
<html>
    <% Dim mhw, mhwString, mwh1
REM    Set mhw = NewJavaObject("MyHelloWorld")
       Set mhw = Server.CreateObject("Chili.Beans")
       Set mhw1 = mhw.Construct("MyHelloWorld")
       Set mhwString = mhw1.myString
       Response.Write(mhwString)
    %>
</html>
public class MyHelloWorld {
     public String myString = "Hello World!";
}hope you could help me out.
thanks in advance :D

hi all,
http://forum.java.sun.com/thread.jspa?forumID=759&threadID=5019680
in reference to the post above, i have a Win2003 server running Sun ONE with Chilisoft ASP plug-in. i did the suggestions there but am still getting the same error, to be exact:
ChiliBean Control error '800a03e8'
java.lang.NoClassDefFoundError: MyHelloWorld
/myhelloworld.asp, line 3
<html>
    <% Dim mhw, mhwString, mwh1
REM    Set mhw = NewJavaObject("MyHelloWorld")
       Set mhw = Server.CreateObject("Chili.Beans")
       Set mhw1 = mhw.Construct("MyHelloWorld")
       Set mhwString = mhw1.myString
       Response.Write(mhwString)
    %>
</html>
public class MyHelloWorld {
     public String myString = "Hello World!";
}hope you could help me out.
thanks in advance :D

"Unable to create control" error

I have installed Quicktime 7.13. There were some installation issues revolving around the inability to uninstall the older version, which required editing registry keys to allow deletion. At last the install went without errors. The icon appears in the task tray.
However, whenever I try to start the QT player, the Error window "Unable to create control" appears. If I click OK, the GUI appears, but I get the same error if I try to open a .mov file. Whenever I try to open a jpg or bmp in the Picture viewer, I get a window stating "Couldn't display [six or seven gibberish characters.]
I need some direction on these symptoms. Thanks.

I had the same problem after installing QuickTime 7.1.3 through the iTunes version 7 download. I could run iTunes OK, but when I tried to start QuickTime I received the "Unable to create control" error in my user ID which has admin privileges and which was used for the install. My son's user ID, which does not have admin privileges, ran iTunes and Quicktime with no problems.
I finally decided to remove QuickTime using my user ID and using the Windows Add/Remove Programs function in the Control Panel. I then downloaded QuickTime without iTunes from the Apple website and re-installed it. It now works fine in both my user ID and my son's ID.
I'm not an expert on this stuff, but maybe uninstalling and re-installing QuickTime could solve your issue, too.
Dell 8400 Windows XP

Remote control error 1891 after eDir upgrade?

- NW6sp3 two-node cluster (production server) houses read/write replica
- NW6sp3 utility server houses master replica and is a ZenWorks 4IR5 server
- The above servers reside in a small chunk of a much larger NDS tree
- Roughly 150 users with the 4.90sp2 client + Zen4IR5 agent
- ConsoleOne 1.3.6c with current Zen and Cluster snapins
Is there a known preferred method (or recommended method) of authenticating
to either read/write or master replica's? Here is my issue:
Prior to upgrading all three servers above to eDir 8.7.3.3, I was able to
use Zen to remote control my users's PC's. I WAS logging into the cluster
(read/write replica), just like all my users still do today. I began seeing
the remote control error "1891" which various TID's describe as an issue
with close proximity to a pure IPX server, and remote control fails. I have
no IPX running in my network currently. Opened tickets with Novell in both
their Zen and eDir teams.....no solution's yet. As I began banging around,
I found that if I force my login to the utility server (master repica in
this case) I now regain remote control ability to my users that authenticate
to the cluster (read/write). Also, if I intentionally login to a different
context of our tree (have a different admin create a temp account for me in
his context, say) first and not into my own context, I can remote control my
users in my context via ConsoleOne. Similarly, if I login to a different
context upon startup, then once the Windows desktop is loaded and I right
click the red N in my system tray, and login as myself into my own context,
I can remote control users. The issue arises when the first context I login
to is my own. Odd I say, odd.
I've done every flavor of dsrepair switches (-xk3, -a, timesync, etc) and
provided logs to Novell. Each dsrepair variant returns zero errors. I
believe the tree is healthy from what I and Novell can tell.
Attached are some logs from about a month ago when I started seeing these
remote control errors. Please note the time stamps on both the remote
controller and remote controlled machines.
I've posted this over on the eDir board as well since it feels like an
authentication issue to me....
Thanks for taking the time to look at this,
Mike
LOG AT CONSOLEONE MACHINE:
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Starting console
#(2884)# 11:45:47 AM 03/14/05 Normal : ZenGetLangValueFromNWLanguage: Trying
to load the resource DLL from Nls\ENGLISH directory
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Resource is loaded
successfully
#(2884)# 11:45:47 AM 03/14/05 Normal : CONSOLE > Inside LoadandParseCommand
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > AppData.bSessionRestart ==
FALSE Hiding window
#(2884)# 11:45:47 AM 03/14/05 NORMAL : CONSOLE > Command line parameters
parsed successfully
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Connection successful at port 1761
#(2884)# 11:45:47 AM 03/14/05 NORMAL : InitClientInLoop() successful
#(2884)# 11:45:47 AM 03/14/05 NORMAL : Before Authentication
#(2884)# 11:45:47 AM 03/14/05 NORMAL : After Authentication
#(2884)# 11:45:47 AM 03/14/05 CRITICAL : Authentication Failed:
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > LoadAndAuthenticate
returned FALSE
#(2884)# 11:45:48 AM 03/14/05 CRITICAL : CONSOLE > Authentication Failed:
returning -1111
#(2884)# 11:45:48 AM 03/14/05 NORMAL : Out of process
LOG AT MACHINE ON FAR END OF REMOTE LINK:
RMErrorLog0.txt
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\ZenPol32.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully loaded
dependent modules...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempting to read
policies...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENUtil: ZENIsWorkstationRegistered:
wsDN = 'CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation is registered
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Workstation Policy -
'EAG-WP:General:Remote Control Policy.EAG.CO.NW.CTL'
#(1484)# 11:45:48 AM 03/14/05 Normal : Reading workstation DN and tree
name...
#(1484)# 11:45:48 AM 03/14/05 Normal : workstation DN -
CN=C0000CC22.OU=WKST.OU=EAG.OU=CO.OU=NW.O=CTL, treename - CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : Loading : C:\Program
Files\Novell\ZENworks\WMSchApi.dll
#(1484)# 11:45:48 AM 03/14/05 Normal : Workstation IS authenticated...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Loaded [ZENNW32.DLL]
successfully
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Successfully initialized
context
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Failure in reading
boolean attribute DM:Ignore Policy in CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Attempt to read using
user:CN=TSUVMCW.OU=EAG.OU=CO.OU=NW.O=CTL, tree:CENTURYTEL
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: User Policy - ''
#(1484)# 11:45:48 AM 03/14/05 Normal : Only workstation policy settings
active...
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Finished reading policies
#(1484)# 11:45:48 AM 03/14/05 Normal : ZENNDSUtil: Unloaded modules...

Mike,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Safe control error message

Hi, after a safe control error message I added the following line but it still gives me the same error. Any ideas pls?
<SafeControl Assembly="Faurecia.Web.UI.WebParts.WPListItemToXML, Faurecia.Web.UI, Version=1.0.0.0, Culture=neutral, PublicKeyToken=52346c11b0bb46e0" Namespace="Faurecia.Web.UI.WebParts.WPListItemToXML" TypeName="*" Safe="True"
/>
Sorry, something went wrong
A Web Part or Web Form Control on this Page cannot be displayed or imported. The type Faurecia.Web.UI.WebParts.WPListItemToXML, Faurecia.Web.UI, Version=1.0.0.0, Culture=neutral, PublicKeyToken=dc814413356c571b
could not be found or it is not registered as safe.

Hi,
Please check the web part file which is getting added to the WP gallery. Some times when you are adding web part files in the VS and after adding if you are trying
to move the web part files to other folders VS automatically adds wrong namespace. Sometimes it will add as <type name="[namespace].[webpartclassname].[webpartclassname]........." />. So modify the web part file by removing extra class
name.
Here is a similar thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa44f29-0d6d-47de-a8d5-144ab6f90ff5/web-part-or-web-form-control-on-this-page-cannot-be-displayed-or-imported-the-type-could-not-be?forum=sharepointdevelopmentlegacy
Best Regards
Dennis Guo
TechNet Community Support

ActiveX Control error -143

I'm running CVI 2012 on windows 7 machine, After installing the application with the distribution program I get the error ActiveX control error , Error Code -143. I would appreciate any help!

Hello, some more data would be helpful in order to investigate this situation.
First of all, that error code is not part of the ActiveX library. It seems a User Interface Library instead: if it's so it simply means "ActiveX Control Error", that is you must search for additional informations inside the ActiveX library and in the documentation for the control you are using.
By the way, knowing actual ActiveX control used would be helpful too, but only after you have discovered some more informations on the error itself.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Crystal Report Viewer Control error

Please Help, I have a web application developed in .net 2005 which is using crystal reports developer product version 10.0.0.533.
This web application with crystal is working fine on my local machine with OS windows xp, but on the windows server 2003 the application web form is running into "couldnot load file or assembly 'CrystalDecision.VSDesigner, Version=10.0.0.3300' or one of its dependencies"
I have compared the assembly information of my local machine with that of the server and could not see the crystaldecision.vsdesigner version 10.0.0.3300 on the server 2003. I have uninstalled microsoft .net 2005 and crystal reports and installed crystal first and visual studio .net 2005 next and vice versa but still could not see that particular assembly available in the windows 2003 server.
Please suggest as what to do for the assembly to be available on the server so crystal report viewer control can be created with out error. Thanks for any help.

Hello Sunitha,
Visual Studios 2005 ships with a bundled edition of Crystal Reports. This bundled edition is based on the v10 code stream, but it is not CR10. It's CR.NET for Visual Studios and it's v10.2. Crystal Reports 10.0 and the bundled CR.NET 10.2 for VS2005 are not interchangeable.
The stand alone version of Crystal Reports 10 is not expected to integrate correctly into VS2005. If you have CR10 Developer installed on your VS2005 machine you can force VS2005 to use the CR10.0 assemblies, but it is not supported.
You need to clean up your application so that it's referencing the 10.2 version assemblies and then deploy the 10.2 runtime files. You can visit the [Crystal Reports for Visual Studio .NET Runtime Distribution - Versions 9.1 to 12.0|https://www.sdn.sap.com/irj/scn/wiki?path=/display/bobj/crystalReportsruntimeforVisualStudio.NET] Wiki for a nice overview of the various versions of Crystal Reports, as well as a listing of the runtime files to match the version of Crystal Reports that is being used. For VS2005 and bundled CR.NET look at the "CR 10.2 (VS .NET 2005)" section of the Wiki.
Sincerely,
Dan Kelleher

Exporting and Importing Destination Controls Error

When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.

The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Budget availabilty control error

Dear Gurus,
I am facing problem while doing time sheet booking at WBS ELement. System gives error "Budget exceeded for the WBS (Error no:BP 603)"
The steps I follow are as under:
1. I created a project in CJ20N
2. Budgeted the project in CJ30
3. Released Budget in CJ32
4. The settings of the budget profile are such that when I release the budget, Availability Control gets activated.
5. Released the project
6. In CAT2, I post actual hours and give reference of the reciever WBS of the project.
Now, in CAT7, when I try to transfer to CO, system gives me the error:
"Item 001 WBS xxxx BUDGET EXCEEDED (error no. BP 603)"
Same thing happens if I try to settle a work order on the WBS and any FI posting
But it allows to post costs for Goods issue.
In tolerance limit settings, the usage is 100% and "All activity grps " is selected
Regards,
VDS

Hi
It seems to be the budget is increased once ur doing CAT7.. so increase the Budget in the WBS element and try to post it again..
I hope this is the problem
- Pithan

FI and controlling error while posting GL

hi all,
I did Fi configration by creating all by my own...
but when i was trying to post GL in fb50 itz thorows error of the following .........
Controlling area does not exist
Message no. KI101
Diagnosis
Controlling area does not exist.
System Response
Without a valid controlling area you cannot continue processing.
Procedure
Check your entries or create a controlling area using the configuration functions.
so that i have chked field status of account group and posting key .... after that i have tried to maintain controlling area there also i found some error as follows...
Background processing incomplete; display only.
Message no. KT312
Diagnosis
You want to maintain controlling areas. Background processing has not yet ended for controlling area VSNI.
System Response
The system branches to controlling area display.
Procedure
You can make changes only after all background processing has ended.
The job in question begins with SM34_VSNI.*
pls help me to solve this issue...
i did not even understand how Fi confgs related to CO
regards
kalai

Hi
Actually i m fresher..... I m working as a Finance executive (sap end user) in one of the Pvt concern.... here they gave me a test server to practice the JV passing .... I was trying to pass the JVS in that test server.....
I can also have access of SPRO in this test server... so that i have created one new company code by my own knowledge and then tried for posting.... i m very much familer with FI configrations and postings....
Two time i have created different different company codes and tried for the GL posting for all times it shows the same error...
I dont know even y itz asking controlling area after doing FI configrations.... I m totally confused...So that i was tried to chk all field status varients then also no use again the same error is coming .......
I was trying to do CO configration there also if i got only display mode only.....
After getting the CO error i was tried to create controling area that time it was in creation mode.... now only the CO area got changed as display mode...can u tell me how to make it as change mode......
Thanks for your consideration in my psoting... pls help me if u can.....
Regards
kalai

Elicense control error

Similar Messages

Maybe you are looking for