Eliminate COEP indexes appearing in EWA report

Hi Experts,
I want to eliminate missing indexes appearing form EWA report
Option 1: To delete indexes.
I am not convinced with this option
Option 2:
HIde the idexes:
I am not sure how to achieve the same.
Please help.
Has nay one tried it before ?
Regards

I want to archieve index coep~1.
Please help.
Regards,
Nikita

Similar Messages

  • Missing data in weekly EWA report

    Hello SDN,
    I have run weekly EWA reports for our productive ECC5 system through SolMan 3.1 for some time, but recently I've noticed that some information is missing from the report.
    Section 11.2 (Response Times) includes a graph showing the Top 5 transactions. The transactions are listed as Transaction 1, 2, 3, 4 and 5 on the graph and there used to be a table below the graph that showed that (e.g.) Transcation 1 was MMBE, Transaction 2 was LT27, etc..
    For some reason, that table no longer appears and the graph is of no little use on its own, because I have no idea what transactions it refers to.
    Has anyone else experienced this problem?
    Thanks,
    Arwel Owen.

    Hi Ragu,
    The strange thing is that this table used to be displayed up until around 6 weeks ago, when it just disappeared off the EWA report. Nothing was changed (knowingly) to cause this. Also, the graph that the table refers to is still included in the report, it's just the table that's disappeared. If anything had been changed, I would have expected both graph and table to change.
    Thanks for your help.
    Arwel.

  • Enterprise Portal EWA Report

    Hi,
    I would like to know the reason why the JCO part is not included after the extraction of EWA Report on Solution Manager? What could be the reason behind this? What are the possible solutions to eliminate this type of issue? The customer actually is complaining about their Enterprise Portal EWA Report because the JCO part is not included on it. I need your expert advice on this.
    Regards,

    checkout the attachment of SAP Note 976054, it contains a troubleshooting section

  • EWA Report of EP server

    Hi,
    I want to generate EWA Report of my Enterprise Protal server in my Solution Manager server.
    Fot that I had install SMD in my Solman server and SMD & wily Introscope in my Enterprise Portal server.
    Now can you please guide me which next steps is require so that  I can genetate EWA report in solman?
    Regards,
    Nisit

    Once you have installed the agents on the satellite system and performed the other steps pertaining to the agent, you need to define the EP system in Solution Manager in SMSY with all the necessary details.
    If the system information is already updated through SLD, verify whether the information maintained is correct and up to date.
    Then execute the SOLMAN_SETUP steps.
    Ensure that the SMSY details are correct as it plays an important role pertaining to the system information and the further setup of Diagnostics/Wily.
    Verify whether the EP system has appeared in your Solution Manager Workcenter SID list.
    Execute the setup wizard for managed systems, ensure that the setup is complete without any errors. If any errors, resolve them and ensure that the setup results are Green.
    Execute the IS Agent setup for the satellite SID.
    EWA reports will be successfully scheduled once all these steps are executed successfully and when the EP system is added in a Solution.
    Hope this helps.

  • EWA report highlights some Transcations by workload and DB load

    Hi All,
    I have a SAP system with 5 App servers
    I have a EWA report which highlights some Transactions by workload and DB load :
    By workload: MMBE, MB51, ME53N, MB11, ME21N
    By DB load : MB51, MMBE, ZINF, MB11, RSM13000, Y_STS_71000018
    I have analysed the transactions from ST03 . How otherwise also should i be analysing to get to know where the bottlenecks are. As per my analysis i can get hold of some tables which i may do rebuliding of indexes. Also what other approch should i take.
    How helpful is ST12 and ST05 and is there any impact to use them for analyis , i mean if i start some traces on will it start filling my os level file systems .
    Please let me know if there is some more better approach if i can take.
    Thanks & Regards,
    Ashish

    Hi,
    i think the EWA always alerts the 5 Transactions with the highest times.
    But this must not mean, that there is an problem.
    The difference is, the EWA reads the overall time a transaction used in you system.
    If the TA was called 1.000.000 times with an average runtime of 200ms, the Transaction maybe on
    first place in your EWA because it used a lot of time, but you do not have an problem.
    Look at the responsetimes for dialogtransactions.
    Kind regards
    Manuel

  • EWA reports in grey colour

    Dear friends,
    I have a problem with the EWA reports.
    It shows me grey colour - Rating not Determined (Gray) - SAP EarlyWatch Alert
    The EarlyWatch Alert session is not executed due to critical data quality issues.
    Check the data quality in the 'Service Preparation and Service Data Quality' section.
    Alert Overview
    DB load from expensive SQL statements cannot be measured due to missing SAP Note 1564508.
    SAP Note 1564508 is completely implemented.
    I tried to create a new report, following the steps:
    The session is waiting for data from a managed system. Data transfer can take up to one day.
    You can also send the data manually.
    In the managed system, start the Service Data Control Center (transaction SDCCN).
    Choose Task -> Create. The system displays a task overview.
    Double-click Refresh Sessions. A dialog box appears. You can define the attributes of the task.
    To start processing the task immediately, select Now in the Scheduling area.
    In the Target RFC Destination field, select the RFC connection that points to your SAP Solution Manager system.
    Choose Run Task Once.
    Confirm your entries. The task appears in the To do view and is marked for processing. When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
    To start the task immediately, select it and right-click to call up the context menu.
    Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
    Task finishes OK, job finishes OK. but when going back to the main page of EWA, I still see the hourglass, with the message : WAIT FOR SESSION DATA; SAP EARLY WATCH ALERT.
    Job finished ok in sm37.
    Is it normal that if the task is finished in SDCCN to still have the hourglass ?
    What do you advice ?

    Hello,
    Externally the EWA is rated...i.e. in DSWP, correct?
    However when you open the report, the Summary Overview has a grey traffic light.
    Is this the grey ratting you are talking about? This is a recent problem.
    One other thing to check is if the Host names appear in both upper and lower cases as this is also related to the Grey Overview Traffic Light.
    The first thing you should check is AGS_UPDATE and ensure all updates are downloaded and activated as there was an SCU ( Service Content Update) that went out recently to address this problem.
    If you find your Service Content is rated all green and you are up to date, and an Ad Hoc EWA generates the same way, then you need to check the recommendations in 'Service Preparation and Service Data Quality' section, because there make be issues with the collectors ST06, SAPOSCOL, etc, that need to be resolved.
    Oddly many people don't read and act on the recommendations given in the EWA reports when there are alerts, and  many times, the solution is being offered right in the recommendation, be it a check to make or a note to reference, so make sure you review any recommendations on the alerts closely.
    Regards,
    Paul.

  • EWA Reporting

    Hello guys,
    Perhaps someone can help me. We have different systems eg. P01,P02,..P05. and each system has a different manager. They all want every week for their system an EWA Report.
    My question: Is this possible ( by email ) and how can i make it work?
    I'm working with Solution Manager 3.2 for 4 weeks now.
    Please help me..
    Meindert

    Dear Meindert,
    I am not sure whether I get the requirement correctly. But I assume that you want to selectively send EWA's for Different SID's to different email addresses.
    There is an BADI added from SP9 onwards which enables us to email EWA's of different SID's to different Email addresses.
    The IMG path for the same is as follows :
    SAP Solution Manager Implementation Guide   >
      SAP Solution Manager   > Scenario Specific Settings   > Operations
    Sending Service Reports by Internet E-mail   >
    Email Filter   > BADI EWA Email Filter.
    and here is the IMG documentation :
    This IMG activity assigns E-Mail addresses to system IDs, in the
    maintenance view of the table DSWP_SYS_EMAIL. EarlyWatch Alert reports
    are only sent to the E-Mail addresses which are assigned to the systems.
    Activities
    Assign E-Mail addresses to system IDs:
    1. Choose New Entries.
    2. Enter the following values:
    Object ID
    SAP system ID
    E-Mail address
    3. Save your engries.
    Transaction SM30 table: DSWP_SYS_EMAIL
    BAdI EWA E-Mail Filter
    Use
    Use this BAdI to send reports automatically by e-mail in the Operations
    Solution Manager.
    Functions:
    Change the subject text of the e-mail
    Filter function for e-mail addresses using criteria (system etc.)
    Requirements
    You must first maintain the mapping table using the IMG activity "Map
    Systems to E-Mail Addresses".
    Default Settings
    The inactive BAdI implementation (DSWP_EMAILFILTER) is supplied. You can
    use this to filter e-mail addresses by system IDs.
    Multiple usage is possible.
    No filter is used.
    Activities
    The following activities must be performed if you want to use the
    standard system version:
    1. Maintain Customizing table (DSWP_SYS_EMAIL, see prerequisites).
    2. Start the activity. The following dialog that appears shows you all
    active and inactive BAdI implementations.
    3. You can activate the implementation by selecting a row using the
    matchstick icon (if the implementation is not already active).
    If you want to use your own (customer-specific) function, you need to
    create your own BAdI implementation.
    To do so, proceed as follows:
    4. Start the activity. The active and inactive BAdI implementations are
    now displayed.
    5. You can use the "Create Implementation" button to create your own
    implementation.
    6. Assign a name to the enhancement implementation and enter a short
    text. Confirm your entries and assign a package.
    7. The system may display a message saying that the assigned package
    does not have a switch. Confirm this by choosing "Yes".
    8. Enter a name for the BAdI implementation and confirm this.
    9. Expand the tree structure for the implementation and choose
    "Implementing Class".
    10. Enter a name for the class and then double click to access forwards
    navigation. Assign a package here.
    11. Now implement the interface method with your required function and
    activate the class.
    Transaction SE19 - BADI Definition DSWP_EWA_EMAILFILTER_BADI_DEF
    I hope that the above information helps if this is your requirement.
    Regards
    Amit Devale

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Short dump when running EWA report

    Dear Expert,
    I got error dump when generating EWA report: OBJECTS_OBJREF_NOT_ASSIGNED_NO
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "CL_GUI_GP=====================CP" had to be
         terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        An exception occurred that is explained in detail below.
        The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
         caught in
        procedure "IF_GRAPHIC_PROXY~EXPORT" "(METHOD)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component.
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.
    Missing RAISING Clause in Interface
        Program                                 CL_GUI_GP=====================CP
        Include                                 CL_GUI_GP=====================CM017
        Row                                     1
        Module type                             (METHOD)
        Module Name                             IF_GRAPHIC_PROXY~EXPORT
    Trigger Location of Exception
        Program                                 CL_GUI_GP=====================CP
        Include                                 CL_GUI_GP=====================CM017
        Row                                     19
        Module type                             (METHOD)
        Module Name                             IF_GRAPHIC_PROXY~EXPORT
    Please advise asap since we need the report immediately.
    Thank you in advance,
    Rudi

    Hi,
    [This note|https://websmp109.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=944541&_NLANG=E] will solve your problem.
    feel free to revert back.
    --Ragu

  • GL not appearing in PCA report S_ALR_87013336

    Dear Experts,
    For acct XXXX, there's balance & we can view line item thru FI (tcode: FBL4N). We can see PC been assigned to those line items, but the GL XXXX not reflecting in PCA report (tcode S_ALR_87013336).
    GL XXXX is a Balance Sheet GL (not a Reconciliation GL). This GL is not added to 3KEH. There are other GLs too, which are not added to 3KEH, but still those are appearing in PCA report S_ALR)87013336.
    If you can please advice about this discrepancy.
    Regards,
    Hussein.
    Edited by: Hussein  Merchant on Apr 18, 2011 5:05 PM

    After adding 'trip type expenses in the layout' in the layout, save the layout as a variant and give it a name.
    Next time when you run the report, put that variant and then run
    Values will come

  • WHT amount not appearing in FBL1N report for Document type RE

    Dear Friends,
    While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
    Regards,
    Ramkumar

    Hi,
    FBL1N is having the classic withholding tax field hence please don't refer the those fields.
    please don't refer those fields.
    Please review attached note 363309 for detailed explanation.
    BSEG-QBSHB is designed to fill for the classic withholding tax. And
    extended withholding tax information is stored exclusive in table
    WITH_ITEM.
    You can check in table BSEG for the fields and will find that system
    do NOT update field BSEG-QBSHB.
    In your line layout,you define a field BSEG-QBSHB. But actully the field
    of vendor/customer line item is filled with zero from FI. Thus,it shows
    zero in line item display.
    And as note 363309 says,
    "Remove the field which contains the withholding tax information
    from your display variant.
    If you want to display the withholding tax information, double-click on
    the document number and subsequently choose 'Withholding tax'."
    Regards
    Madhu M
    Edited by: M Madhu on Jan 18, 2012 9:13 AM

  • EWA reports for non abap systems

    Hello gurus,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
    >>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
    In the SMD i can see just the abap systems  for which the EWA are being already generated.
    (i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
    Do you have any idea, what i have done wrong?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system , EP  SPS 19
    Thank you very much for your points!!

    Hello Jagan,
    I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
    And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
    Do you have any idea?
    Thanks,
    Best regards
    Slavomir

  • Duplicate entries / Employee is appearing twice in report (OR more than onc

    Duplicate entries / Employee is appearing twice in report (OR more than once)
    When I hire an employee, I assign the position, and based on the positions other values get defaulted /assigned to that employee.
    I have one case where employee has been assigned to one position, but with different position descriptions, and in report it is showing duplicate entries for the same personnel number, now client need for one personnel number only one row to display in report
    Also I tries to run , Birthday list standard report , it is also showing 2 entries (Or sometime more than 2)for the same personnel number , May I know why this is happening?
    And how to fix this bug
    Thanks and Regards
    Jaydeep Jadhav

    Hi,
    Can you check where the code is written to get employees from position, there may be two cases where multiple records exists for single person.
    1) When getting data for pernr assigning to a position they may missed out date condition. If so we need to bring only active positions assigned to that employee.
    2) There may be multiple positions assigned to a single person. In this case you need to ask the client what you need to do.
    Delete adjacent duplicate is may  not be correct solution as which position we need to delete is not sure. You check above two cases and go head.
    Hope this information will help you.
    Regards,
    Narendra.Soma

  • Email address in EWA reports

    Hi gurus,
    May be a simple question but I am new to Solution Manager and every morning we get emails from an email adress attached ewa reports. How can I change the e-mail adress
    that these emails are coming from?
    Thanks alot.

    Tanuj,
    Were you able to achieve this. The SM:EXEC SERVICES job and the SCOT job are currently run by user ID: XYZ and the the EWA
    is set up by the user ID XYZ.
    I changed the following:
    Deleted  SM:EXEC SERVICES and the SCOT job and recreated them to be run by user ID ABC (the one I want to change to).
    It still uses XYZ as the sender (not ABC) because as the configuration is set up by user XYZ, it is creating SM:EXEC SERVICES
    on the fly to be run by user ID XYZ.
    Please let me know what I am missing. What else need to be changed ? Thanks.
    Ravi

  • EWA Report with yellow rating and NO data

    Hi,
    We have upgraded the solution manager to EHP1 in June. Befor that my EWA was working perfectly fine.
    Our EWA report (after upgrade) is getting generated and  has a rating yellow but it contains No data.......shows data oly for hardware capacity even no other performance factors included in the report.
    I checked settings in satellite system as well as in solution manager. everthing is working fine. All RFCs, service defination, word setting everthing is fine.
    I need your assistance to resolve this issue o priority as its EWA for PRD isnt getting generated.
    Thanks,
    SAP Basis

    my ewa contains:-
    1.2 J2EE Configuration Data
    1.2.1 Support Package Maintenance
    No configuration data was found.
    Recommendation:
    Check whether data is displayed for this system in application 'Change Reporting', which can be found in the 'Root Cause Analysis' work center under 'System Analysis'.
    The requirements for 'Change reporting' are:
    - Setup of Diagnostics
    - Setup wizard for this system has been executed successfully
    - Periodic extractors are running successfully
    For more information, see http://service.sap.com/diagnostics.
    2 Java Performance Data PI1
    2.1 Java Application Performance
    No performance data was found.
    Recommendation:
    Check whether data is displayed for this system in application 'Workload Analysis', which can be found in the 'Root Cause Analysis' work center under 'End To End Analysis'. If the data is not available here, open a message on component SV-SMG-DIA.
    If data can be displayed in the Workload Analysis but is missing here, open a message on SV-SMG-SER.
    The requirements for the 'Workload Analysis' are:
    - Setup of Diagnostics including BI
    - Setup wizard for this system has been executed successfully
    - Agents have been set up and are running
    - Periodic extractors are running successfully
    For more information, see http://service.sap.com/diagnostics.
    please suggest

Maybe you are looking for