Eliminate internet connect message?

how to a eliminate/suppress a message that pops up approximately every 30 minutes: "internet connect - disconnect - stay connected."
i would apprciate any replies.
thanks
[email protected]

System Preferences --> Network --> Internal Modem -->
PPP --> PPP Option --> Prompt every xx minutes to
maintain connection
thank you so much for your help.
it worked!
sanchinhan
iMac Intel   Mac OS X (10.4.7)  

Similar Messages

  • Internet Connection Message at startup and various moments of the day

    I started out using a dial-up connection, then later upgraded to ethernet. Now, everytime I start up my iMac I get a Internet Connection message. Here's what it says, The selected communications device does not exist. Please verify your settings and try again. I click ok and my wirless still works. Then, later during my session I get the message again. Any thoughts on how to get rid of this message? Thanks in advance.
    p.s. is this the right place for this question?
    Thanks,
    mdawg

    Yes, this is the right place for such a question.
    The issue with your problem is working out specifically which 'communications device' the Mac is complaining about. It's presumably the modem, but that's not necessarily the case.
    The first place to look would be in System Preferences -> Network.
    What network ports are enabled there? If the modem is still listed and is the preferred connection (it's at the top), then the Mac is going to try to use the modem and fall-back to the ethernet network if the modem fails.
    If that is the case the solution is simple - just use the Show popup menu in Network Preferences to select Network Port Configurations. Here you can enable and disable different ports, as well as change their priority (by dragging them up/down).
    Either drag the ethernet port to the top of the list or, if you never expect to go back to the modem, disable the modem option.

  • Installing WRT54G - "No internet Connection" message

    I have a 2wire Gateway and AT&T high speed internet. Just got a WRT54G, trying to do the setup.
    Connecting my gateway to my PC, using either of my two network cables, the internet works just fine. Connecting gateway to WRT54G to PC, following the installation software, installation fails with "No internet connection" - and it's right, there is no internet connection - I had to plug the network cable directly from the gateway to the PC again to type this.
    When I connect gateway-WRT54G-PC, the power, WLAN, internet and 1 lights on the WRT54G are lit, so it clearly thinks there's a connection.
    Does this router not work with 2wire gateways? Any suggestions?
    Cheers,
    Peter

    If you are getting Ip - 192.168.1.69 ...change the LAN IP of the router to 192.168.2.1 .... Click save settings .... it will show "Page cannot be displayed" message .... Unplug the Power of Router & then the Modem ...
    Wait for few minutes ... then plug in first Modem Power then the Router Power ....
    Access the setup page of router using http://192.168.2.1 .... use same username & password you used last time .. ...
    Check if you are able to go online or not ...
    If not then on the router setup page ...use Internet Connection type as PPPOE .... use ISP ...... username & password ....
    Click save settings ....
    Check under Status tab if it shows connected or not ... if so then you are getting valid Ip Address .....
    If not then let me know the error message you are getting .....

  • Internet Connect message....

    I keep getting a message from "Internet Connect" ( the purple icon in my preferences), asking if I want to stay connected or not. I have not seen this before...what did I do if anything, to get this to come up and can I un-do this message. It is annoying !!!! Thanks !!!

    In the Network Control Panel>PPP Tab>PPP Options... button, you should find what you need.

  • "No Internet Connection" Message

    I got the "No Internet Conection" message when tried to update my C7 to Belle. I've already re installed Nokia Suite to version 3.3.86, disabled firewall and still nothing. I don't use any proxy and already checked the certificates issue and all is fine.

    Hi pedbrinco,
    Can you browse the internet using Internet Explorer?
    Have you tried uninstalling Nokia Suite from the PC which doesn't work and reinstalling it?
    Also, it may be worth to reset your router and change your password, then reconnect. Do this before reinstalling the application, to make sure it is not a network issue.
    If the problem persists check your firewall settings. 
    You can try also turns out firewall and try to uninstall  the antivirus and then restart computer. After computer came on again, I hope that the updater for nokia belle will work.
    Cheers,
    Marina
    Nokia Suite team
    Click on the Star Icon below if my advice has helped you!

  • IWork for iOS 'internet connection' message...

    This was not a problem before the latest iOs 7.1 update.
    Every one of the iWork apps now states exactly as follows "Opening (App_name) Help requires an Internet connection". Selecting Help in the menu or the Learn More balloon from active Coaching tips turned on gives same response. It doesn't matter where I log into wifi (home/work). Proven, working net connection. No changes made from BEFORE update to AFTER update.
    What gives?

    Numbers and Pages are not syncing with iCloud on my iPhone or iPad, except for one occurrence in five days. Changed documents sit there with an arrow icon.
    Hardware is iPhone 5S running iOS 7.1.2 and iPad Air running 7.1.2
    Latest update of Numbers and Pages. I deleted and reinstalled Numbers on the iPad without any change however this did seem to bring the esisting documents down to the device from iCloud.
    I have an internet connection. I have tried turning 4G on and off, setting up a hotspot on either device so that the other has a wireless connection but this has not fixed the problem.
    I have tried restarting both devices.
    i have tried turning Use iCloud off but this only worked once.
    Data roaming is on and cellular data is on on both devices.
    Settings/iCloud/Documents & Data/Numbers is turned on and Settings/iCloud/Documents & Data/Pages is turned on on both devices.
    Settings/Numbers/Use iCloud is on and Settings/Pages/Use iCloud is on on both devices.
    Looking at Settings/iCloud/Manage Storage/Numbers shows there are documents.
    i am currently travelling, hence the 3G/4G. At home, on my wireless network (based on an ADSL connection) it will often sync sporadically enough that it is not much of an issue, just an irritation. However this total lack of syncing over the past five days is getting to be pretty unamusing.

  • Internet connection message

    When on the internet if I'm streaming, every 15 mins I get a message "do you want to remain connected?"
    If you don't respond it automatically disconnects from the internet.
    How do I stop this from happening?

    Hi,
    Go to System Preferences > Network > Your connection method > PPP > PPP Options and then adjust the settings as you prefer.

  • What can I do to fix my Internet connection/ Messaging? It is slow or does not work at all.

    Also my snapchat is not working either, It says "Could not connect, please check your connection and try again. Also my messages take forever to try and send then fail (iMessage). Please help me

    The same when the iPhone is connected to an available wi-fi network, or just when connected to your carrier's cellular network?

  • Droid 4 "No Internet Connection"

    My phone will recognize WiFi, but when there is no WiFi, I get a No Internet Connection message.  I have a few bars at the top and I have tried it in a number of different locations.  I have gotten it to work a few times, but mostly, nothing!  Any suggestions?  I have tried powering off and turning back on.  Didn't help!

    My wife has the same problem. But usually powering off and back on will make it work.
    If she has wifi enabled here at home and she leaved, it will not switch to 4G by itself.
    Pretty annoying. I think we will stop by at the Verizon shop and see what they can do.

  • Trying to download acobat pro but recieving internet connection error

    has anyone received a no internet connection message when trying to download? I am connected to the internet so I don't know what the issue is.

    try a different browser or if you follow all 7 steps you can directly download a trial here:  Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • New accessory keyboard won't allow Internet connection!

    I just bought a new Mac keyboard ($29) and when it's plugged into the MBP before start-up, I get "no internet connection" message. I have to start up the MBP then plug in the keyboard.
    What's up with that?

    Netgear wireless router. Adelphia said that I get disconnected because our router shows a connection for a continuous time. It has been on for over 13 hours and showed a continuous connection.
    What I have to do is go to Sys Pref, Network connection and reestablish the connection. It's a pain in the tuckus.

  • Bridge Startup "Internet Connection Error" Message

    I'm using a Dell Dimension 8300, with 512 M. of RAM.
    I live in an area where dial up is my only internet option, so most of the time I use Adobe Bridge I am off line. I just updated to Adobe Bridge 1.0.3.107. Now, whenever I start Bridge, I get a message telling me that "There was a problem with my Internet Connection." This is an irritation, minor, but irritating still.
    I'd appreciate it if anyone could tell me how to disable automatic checking for the Internet. Since I never use Adobe Stock Photos, it I have little use for an Internet link to Bridge or Photoshop.
    Thanks in advance.

    It's a known issue. If you use Online Services then there isn't a lot that can be done at present. However, if you don't use the feature then simply removing the OLS script will eliminate the problem. You can do so by:
    1. Open Bridge Preferences
    2. Hit the Reveal: "Reveal Scripts in Finder/Exporer" button
    3. Find the ols.jsx script in the dialog that opens in 2 above.
    4. Drag the ols.jsx out of the folder
    5. Restart Bridge and the problem will be gone

  • Why am I getting a message that says "Page is taking too long to load"? And then it gives me a stripped down version of the page. BUT it always works fine in Safari, AND I have a 15MBPS Internet connection?

    It routinely affects the most frequent sites I visit: odesk.com, batchbook.com, google reader. They aren't bandwidth intensive sites, and as I mentioned I have a really fast internet connection. Sometimes refreshing the page helps. Other times it doesn't and I have to use Safari.

    https://discussions.apple.com/message/17862980#17862980
    https://discussions.apple.com/message/20162496#20162496
    yes. my thought was to make certain your drive is 100% in order to eliminate that persepctive

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • Not receiving texts from iPhone contacts when I'm not connected to wifi or cell data. I can't send and receive regular SMS texts with non iMessage users but iMessage users message are not being converted to text when I don't have internet connect

    I can send and receive to any non iPhone user. I can send a message as a text to an iPhone user but if I'm not connected to cellular data or wifi I do not receive messages from iPhone contacts. From what I understand these message should automatically send to me as texts instead of iMessages but since the update it's not functioning properly. Please help. I've tried turning iMessage off and I still don't receive the messages until after I reconnect to wifi.

    I have the same problem! Before the upgrade, if I wasn't connected to the internet, any messages sent to me from an iphone would convert automatically to a text message. I have payg tarriff, so I turn cell data off, as it costs too much to use it. I have wifi at home and work, but if I'm out and about, I don't receive texts from iphone users until I'm on wifi. I get them ok from non iphone users. There was never any problem until ios7

Maybe you are looking for

  • Help with dashboard on a mac mini

    I have 7 mac minis running os 10.4.10 and a few I have upgraded to 10.4.11. The problem is I have created a user and have turned parental controls on and locked down the computer. Now when you launch dashboard none of the widgets show up. You place t

  • Can't able to create delivery in ME2O

    Hi MM Team, one of my user is created a subcontracting PO and try to create a delivery in ME20 at that time he is getting a error message (Essential transfer parameters are missing in record:  000001) also added to it the vendor is a new toller vendo

  • Extract() problem in Enterprise manager

    OEM issues queries like the following one in several places: /* OracleOEM */ SELECT c.extract('/element/@name', 'xmlns="http://www.w3.org/2001/XMLSchema"').getStringVal() FROM  table(xmlsequence(( SELECT  s.schema.extract('//schema/element') from dba

  • Mandatory fields for plant address in SPRO

    How do we set the mandatory fields when entering plant address in SPRO, i.e. in path : Enterprise Struct->Definition->Logistics general->Define plant?

  • Retrieving records to presentation server after Background Job.

    Hi Friends, Here i am working on a data updation program.I am passing the data in an excel and after updation all the error records are populating into another Excel file whose path also i am providing in the selection scree. This error excel file i