Elimination of volume (kilos) not working

We are running our consolidation on BPC 7.0. We have a USD consolidation of all of our legal entities.
We also have a EUR consolidation. This is translated by loading a GBP to EUR and a USD to EUR rate for the USD eliminations that exist from our USD consolidation.
The problem is that all eliminations are working except for the elimination of sales volume, which we would like it to perform in kilos rather than lbs as in our legal consolidation.
We have an account set up as the other side of the elimination, where it has been indicated in the Account dimension to eliminate to. Since all the other eliminations are working (Intercompany Sales, Intercompany Receiveables/Payables) I am stuck as to where else to check.
Thanks in advance!

The program is called Quick Launch. It might be something like QLBCTRL.exe.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • My volume is not working when on the ringer what do I do

    My iPhone volume is not working when I have the volume set on. It will work with the headphones but other then that nothing. What's going on with it?

    supposedly from what I have read it is a software issue. I actually am also having this problem it worked after I performed a full reset,  but now it has started again tomorrow I am going to the apple store to find out what I can do as I bought my 4s right before the 5 was released.

  • Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

    Have you tried the standard fixes:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod.
    If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

  • Volume is not working properly

    Volume is not working. When listen to music. Can't even see on the screen the button to control the volume

    Have you tried http://support.apple.com/kb/HT4085
    Sometimes it happens. If not try a reset. Hold down POWER + HOME for 10 sec until the logo appears.

  • Volume button not working

    Hi,
    i have recently purchased a nokia lumia 620 and since yesterday suddenly the volume button to increase the volume is not working
    what can be done here ?
    please let me know in case of any clarifications.
    thanking you,
    regards
    Arpita

    Is it the same if you try without the Back cover ? If it works fine without it then put the cover back properly and check again..
    Else, you may try a soft reset : Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds). 

  • My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
    Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

  • My volume key not working volume increase automatically, how to mute all audio

    my volume key not working, volume increase automatically if i go to audio settings i can adjust, but  again volume increase automatically , how to mute all audio

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
    If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
    Use iTunes to restore your iOS device to factory settings - Apple Support
    If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
    iPhone - Contact Support - Apple Support

  • Late 2009 imac 27, bluetooth keyboard pressing fn f11 volume down not working and automattically go to mute

    Hi all,
    having problem last few days with my late 2009 imac 27,  my wireless keyboard volume down not working when i pressing, up is working (f12). but when i press down (f11) after few pressing it will go all the way to mute.
    but the stranged is after awile ( if i have pressed up) it will go down all the way to mute as i didn't press anything. and if i leave it for awile my mute icon still show it on display and will not turn on my screensaver /  sleepmode.
    have osx 10.8.3 newest version. mountain lion.
    please help.

    i had the same problem like you did
    i wanna ask you something.How can i dod reset PRAM?
    Because when i restart my imac,the keyboard is shutting down.then it takes a time to reconnect again to imac.
    that time the screen appear in log in view
    help me out please

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • My nephew's iPad volume will not work? Any clue why?

    My nephew was messing with the "find my ipad" service, ended up erasing everything. i backed it up and now the volume will not work, not with the side button or even give it as an option on the music. I've checked the volume setting, the speaker work fine. I checked if he muted it some how but i can't figure out why sound won't play.

    You backup but do you backup with iTunes? If you do and you have an older backup... One that existed before you erased the device.... You can try restoring from that backup. Restoring from a backup restores the previous app preferences and settings to the iPad. If you decide to try this, turn off auto sync first so that you don't inadvertently overwrite the backup.
    Launch iTunes on your computer and go to Edit>Preferences>Devices, check the box at the bottom that says "Prevent iPods, iPhones and iPads from syncing automatically. You can also check in that window to see if you have any backups that predate the problem - the wiping of the iPad. if you do have a backup - Click OK. Quit iTunes.
    Connect the iPad to your computer with the cable and launch iTunes, right click on the iPad name under devices and select Restore From Backup. Select that backup from the menu (in case you have additional or multiple backups) and restore from it. Sync with iTunes after you restore from the backup.

  • Ipad mini water damage and now my volume does not work!

    Phone was in purse where I accidentally put a water(which I thought was closed tightly) and now my volume does not work!

    Water is generally fatal for iPads.  You might take it to your Authorized Apple Service Center and see what they can do for you.
    Prepare to replace your iPad.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • Iphone 4 volume buttons not working

    iphone 4 volume and mute buttons not working, checked all settings they are all fine and when headphones in it works??? When I take out headphones the volum buttons do not work, when phone rings or text receives only vibrates???? HELP!!!!

    This could be due to some debris or dirt inside the  headphones jack that makes the iPhone think that the headphones are connected even when they are not.
    Try to see if you can clean the jack being very careful, with canned air as sold in electronics store.  Some people have been successful by introducing and withdrawing the headphones jack several times in a row to displace whatever is in there if it is lodged in.
    Avoid introducing anything else like a pointed object.  You could damage the jack.
    If all of this does not work, I would try first resetting the phone by holding the home button and the power button together for about 15 seconds or until the whilte apple appears, then waiting until the phone resets.  If the problem continues after this, take it to an Apple Store to see what they believe should be done.

  • DV9700 Volume Controls not working after motherboar​d replacemen​t

    I have a HP Pavilion DV9702ea, which I've had for just over two years now. It worked absolutely fine for me in every way since I got it until about one month ago when I installed some software that required me to restart Windows. The laptop shutdown but did not restart. I tried to switch it back on but it would not work - when I pressed the power button the power light would blink for perhaps half a second but that was it. After some internet searching I ascertained that this is a symptom of a common problem with these laptops and that it suggested that the GPU had failed, which meant I needed a new laptop.
    So I ordered a new laptop using the model number shown on the sticker near the RAM ports. It arrived and I installed it. Now my laptop is fully working again - all except for the volume controls. On the control panel above the keyboard, all of the QuickPlay keys (Q, DVD, previous, Play/Pause, next and stop) are illuminated but the volume control keys (mute, - and +) are not. I have Windows Vista installed with the correct audio driver and it does not respond to me pressing these keys, so it's not just that they're not lit up, they're not working at all.
    I've tried everything that I can think of to fix this - as far as I'm concerned it should not be a software issue, because these keys are supposed to be illuminated from power-on, so even without a hard drive or an operating system installed these keys should be lit up. Nevertheless I've tried making sure all the audio, QuickPlay, QuickLaunch and QuickTouch drivers are up to date and have tried alternate drivers for all of them. I've checked the cable leading from the motherboard to the controls - it appears to be intact, but I even ordered a replacement just in case and that has made no difference. I've extensively Googled the problem and the most promising fix that I could find (that is repeated on these forums several times) was to power off the laptop, remove the mains adapter and battery, hold the power button down for 30 seconds to discharge any static and then power on again. I've tried that a few times and it has not fixed the problem in my case.
    So I'm at a loss now. My last resort will be to return the motherboard for a replacement, but that will obviously be a lot of hassle for me as I'll have to strip down the laptop to remove it and I'll be without a working laptop for a day or so. And then, if it's not a motherboard fault, I'll have put a lot of effort into not getting anywhere. So is there anything else I should try?
    Any help would be much appreciated.

    I have this issue before, in my case, its ribbon cable issue. dv9000 have two ribbon cables the one that have broken is the long one, (connect mobo to switch panel). However there is other possibility that the switch panel also broken.
    Try buying the ribbon cable first, it is much cheaper compared to switch panel.
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

  • Volume control not working after I plug in speakers or headphones

    When I turn on my 13 inch with Mac OS X version 10.6.8 or if I restart it, my volume works perfectly. However, whenever I plug in earphones or speakers the volume will be 'stuck' on the loudest it can go. When I use the volume controls on my keyboard or the slider at the top menu bar, it will make the clicking sound as if the volume is going up or down and will show the white speaker with the volume being adjusted but the volume will stay on the loudest possible setting. Even after I unplug my speakers/headphones the volume will continue to not work. There is no red light coming from the headphone jack and since it works upon startup, I'm inclined to think it's a software issue and not a hardware issue but then again, I don't know the first thing about computers. Since this has started, I've looked online for similar problems or suggestions but nobody has had this exact same issue, but I did follow the suggestions for similar issues. I repaired the disk (I could only do it for the Macintosh but I am running bootcamp with windows on the other side but I've used it maybe once for a pc only program and have never run the internet on it so I doubt the problem is coming from that side). It repaired a bunch of stuff but it didn't fix my issue. I also reset the PRAM and the NVRAM (I don't know what this does, but someone suggested it so I gave it a shot) and it did nothing. If you have a suggestion for something I can do, please be detailed, or point me to detailed instructions because my computer knowledge is very limited but I'm willing to work to fix this. Thank you!

    Make an appointment at the Genius bar at the Apple store.
    Ciao.

Maybe you are looking for