Elite book 8460p touch pad technical specs

I would like to know what the elite book 8460p touch pad is made of - is it anodized aluminum?  if so, specifically what anodizing technique was used?  where can I get the same material.  If it is made of plastic, what specific plastic is it?  where can I get some?

Material specs would fall in the realm of trade secrets I doubt HP publishes anywhere. The obvious place to get a sample of the materials is to try to find a broken laptop you can pick up cheap.

Similar Messages

  • Elite Book 8460p - touch pad will not disable

    Hi everyone,
    I work on the helpdesk of a company and one of my users has been having an issue. He has an Elite Book 8460p and just recently started having issues with the touchpad on his computer. When he double clicks the upper left corner of the touchpad nothing happens. I have tried uninstalling and reinstalling the drivers for the Synaptics Touchpad twice, with drivers directly from the HP site. I have also switch the user's hard drive to another 8460p but the same issue happens.
    I have attempted to disable the touchpad in the Synaptics Device Options under the Mouse section in the Control Panel. After I hit the Disable button, it does turn the touchpad off for a time, but it seems to turn itself back on randomly. I would disable it, apply and hit OK to close the windows, test the touchpad and it would reenable itself. Has anyone else seen a problem similar to this? I was hoping there was a way to disable it in the BIOS, but I did not see anything.

    Hello Clownmaserfunk,
    In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
    EliteBook Fourm
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Elite Book 8460p fell. Lid bent. Frame around bezel won't stay snapped snugly

    Had another HP with increasingly more screen flicker to point i couldn't always see what was on screen. Picked up replacement, NEW HP Elite Book 8460p on 9/25/12. Two days later, tripped over power cord. Laptop fell 35" onto hardwood floor while open/on. Left bottom corner (when laptop closed) dented. Frame around display bezel no longer snugly fits. 
    Concern:  When looking down thru open lid edge, can see light from display because frame snaps in, but won't stay Snug. Think dust/moisture can seep thru, causing damage. I'd post a picture ... but ... using ipad and this forum says you must have flash, which I don't. 
    What I've done: GENTLY un-bent frame as much as possible with pliers.  Taped frame to cover to keep snug. Looks tacky for a business laptop and certainly isn't a FIX.  New to forum today, but did search and found replacing entire lid is very expensive. So, googled every word I could think of to find laptop cover, similar to hardshell or silicone faceplate for smartphone.  Best I could find was this site but the only HP laptops they service are Pavilions. Http://www.ipearl-inc.com/
    Help appreciated:
    Find faceplate like those for cell phones that would cover entire top of laptop but leave rest uncovered.
    Could tape work? Or, could further damage result from loose frame?
    Other suggestions?
    yes, I could go back to IT, tell them I'm a clumsy idiot, and let them solve this but ........ :-)
    Spoiler (Highlight to read)

    Hey there. Dont be to down on yourself. I dropped my new Beats Edition Envy a while back and had the same thing happen. Would you mind posting the pictures? I would like to see how bad the damage is. Also have you checked on eBay or Amazon for replacement parts? I found both parts for my Envy new on those two sites for relatively inexpensive.
    You are correct that the gap could cause damage if something slipped down in there or collected moisture. Its not a huge problem, since their are vents that could do the same thing. Its just something to keep an eye on. Tape may work for a short period of time but I would try to get it fixed when possible.
    Hope this helps!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Hp pro book 4510s touch pad and buttons notworking.

    i have pro book 4510s , my touch pad mouse buttons stopped working, i tried to restore and even change the operating system hoping that it was corrupt but all the same its not working until today, please help me.

    Hello tokenltd,
    In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
    HP Probook
    Thank you 
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • Hp elite book 8460p battry erro code

    the battry of my laptop is given me an erro cod and can not keep me for a long time,what do i do

    Hmmm, was it from hp support assistant? Try doing a battery check in windows.
    Sorry because of different timezone I might not be able to help/reply you right away.IF that happens I deeply apologize!
    **Click the White thumb if you like the answer.**
    **Please mark Accept As Solution if it solves your problem and only solves your problem, if you have any more questions please ask, this also helps others to solve related issues.**
    Feel yourself like home here, we are all happy to help, if you have an question reply or start a topic or pm me or an expert.

  • Can't remember default password to get in my elite book 8460p

    Serial no cnu138174n
    Please all my work is in here
    Mp

    Are you talking about the BIOS password or Windows Password ? 

  • Mac book pro got wet touch pad not working

    my mac book pro touch pad got wet and is moving curser irractically  Im using mouse but v tricky too..jumping all over please help please

    If you just had water on it, just let it sit and get dry with the computer turned off for at least 24 hours.  If it still fails to work properly, you may need to modify your System Preferences for the Keyboard and Mouse setting to ignore the trackpad until you can get it fixed.   Alas, that likely is not covered under warranty.

  • Touch pad light is off

    hi
    my note book pc touch pad light is not working. pls tell me what is the problem in touch pad

    Does the touch pad still turn off and on?
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in  finder

    Hi..
    I repled to you here >  https://discussions.apple.com/message/25598596#25598596
    Please do not start duplicate topics. It makes it that much harder to assist you.

  • How do i get my touch pad to work on my Mac Book Air with windows/office

    How do i get my touch pad to work on my Mac Book Air using boot camp with windows and office.  Does it work the sale as on the Mac side?

    Did you install the Windows Support Software ?

  • Resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?

    See:
    * [/questions/777886]

  • G3 Touch pad and other specs

    Looking to buy a second hand i-book, something bare-bones,very basic for my wife and kids to surf and email with.
    -Do the old G3 (snow white) ibooks have multi touch pads? Specifically the 2 finger page scroll gesture.
    -Wireless connection?
    -Bluetooth?
    Is there anyone looking to sell one of these ?

    +-Do the old G3 (snow white) ibooks have multi touch pads? Specifically the 2 finger page scroll gesture.+
    No.
    +-Wireless connection?+
    With the addition of an optional original AirPort Card. (Some used iBooks will have these included.)
    -Bluetooth?
    No.

  • The touch pad on my Mac book Pro is very sensitive and causes changes without hardly touching it. Can this be changed or does it need replacement?

    The touch pad on my Mac book Pro is very sensitive and causes changes without hardly touching it. Can this be changed or does it need replacement?

    Touchpads are just that, touchpads.
    You touch it and something happens unfortunately, you can't rest your fingers on it while your waiting to do something else or it triggers a response.
    You either have to train yourself to remove your fingers and keep them suspended, causing wrist, arm and hand pain, or plug in a standard mouse where nothing happens until you press the button, like years of ergonomic experience has shown is a much superior method.
    Touchpads are likely less expensive to produce and breakdown less often under warranty, so just like less expensive to produce glossy screens, it's a cost cutting measure they were  incorporated into our devices and required users to adapt to sweeps, gestures and other useless actions for little benefit.
    I've owned my Early 2011 MacBook Pro for a year now and have only used the trackpad once, the mushy keyboard perhaps only a couple of dozen times. Preferring external devices where I can rest my digits and nothing happens until I apply pressure or use a scroll wheel.
    Needless to say my keyboard area is in brand new condiiton, remains covered from the original packaging, protects against dirt and spills too.
    Mac's keyboard and trackpad area tend to wear out pretty fast, like in about 3 years, making one consider getting a new machine long before it physically fails.

  • How do I handle that my delivered mac book pro was broken (touch pad) although packaging was fine?

    Found that my new, finally arrived computer, is broken (touch pad completely crashed). The packaging is fine. It must have been broken when being put in the box which makes me even more frustrated. Then, when calling support, no help is available until Monday. Sooo frustrating...

    Whiskyhakan wrote:
    Hi! No apple stores unfortunately. Do you know what I can expect from Apple? More delays without any kind of compensation?
    Things like this are handled on a case by case basis. What delays have there been so far? Apple isn't an airline which compensates you based on late flights or lost baggage. They give you a warranty for their product and will honor their warranty according to their rules. Because of relatively severe damage done to a part inside a box that shows no sign of damage, you must be able to see that this is quite a bit out of the ordinary. Most people don't react well to anger, threats, demands, and ultimatums. Make your case calmly and honestly and the rest is up to them. If first conversation doesn't go anywhere, ask to speak to a higher-up.

  • My touch pad getting hot and freezing up while my laptop just on.

    When I use my notebook more than 2-3 hours while on floor or hard surface touch pad gets hot or does not work properly I have new 5months used notebook and latest touchpad drivers. But when I use my notebook as playing games or watching movies with external mouse then my touchpad getting too hot but notebook remains normal condition.
    This question was solved.
    View Solution.

    According to the message you have recently posted I would like to confirm that this could be a hardware issue and I strongly recommend you to immediately Contact HP Technical Support over the Phone for further assistance without any delay to get your Notebook diagnosed and serviced by an authorized HP Certified Engineer
    You can also Check your warranty Here to verify the warranty status
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    GBL84
    Although I am an HP employee, I am speaking for myself and not for HP

Maybe you are looking for

  • How do I make my computer the primary for my iPhone 3G?

    How do I make my computer the primary for my iPhone 3G? I am able to load music from my iTunes library but unable to delete music or create playlists on the phone from itunes. The computer I set the phone up with (primary) was destroyed.

  • Updating Camera Raw plug-in for CS5.1

    I have recently updated to Lightroom 5.7 on my PC and also use Phototshop CS5.1. When I use LR and then try to use the Edit in CS5.1 option I get the error message saying I should upgrade to Camera Raw plug-in version 8.7. I cannot find any way of do

  • Problem in Adding in Document Object Table.

    I want to Add/Update the data in the Documentobject table and DocumentLineobject table through my own SRF. Please guide me how should i proceed.

  • Display values on a chart

    hi, in excel, you can display the value of a bar in a chart right on the chart. i've looked in cx 4.5 for the equivalent option, but did not see one. after looking at some of the chart samples, i noticed that i did not see this am i correct that this

  • Has anyone else had terrible customer service trying to replace a lost or stolen phone through Verizon?

    Has anyone else had terrible customer service trying to replace a lost or stolen phone under their warranty plan?  How did you get a resolution or replacement phone?