Elite Pro, CMSS-3D not working after driver update

Have changed from an X-Fi Platinum to the Elite Pro and updated to latest drivers and now the CMSS-3D cannot be controlled from the I/O console.
It worked before installing the new drivers.
No other issues other than that.
Anyone else have the problem?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Similar Messages

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Yoga 2 Pro wifi not working after driver update

Hi all, I just updated my brand new Lenovo Yoga 2 (13") from Windows 8.1 to Windows 10. But after doing so, I cannot establish any WiFI/W-LAN-connection! If I go to the settings for network adapters in the system settings, I even caanot find the wireless LAN adapter as if it was not installed at all! Can anyone help me? Is there any source for new drivers or something else to fix this?Thanks a lot and best regards from GermanyJohannes

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

Excite PRO 3G connection not work after system update

Hello, I live in Italy and on last Sunday (january 26th) my Excite PRO tablet (model AT10LE-A-10H) got the Android version 4.3.201121220.35. After restart my wifi works fine, all other app work fine, but my 3g connection doesn't work, mobile network bar is empty and it says "no service". My sim card is ok. I used this sim card before the system update and I didn't get any problem with Android 4.2.2.
Please help me I'm waiting for your help.
Thank you
Regards

This is the forums for Toshiba USA. Unfortunately, we don't have informaiton about your model. You may want to contact Toshiba in your region. You could check the Toshiba Europe forums.
- Peter

Phone not working after OS update, phone not working after OS update

phone not working after OS update, phone not working after OS update

I do have a questiion. I started the most recent iOS update on my iPhone last night and before it was ever completed a message appeared on my screen. It is a pic of the docking/charging cord with an arrow pointing to an iTunes logo...HELP!!!!! I have tried holding down the home key and power button several times and the same message continues to appear.

My facetime on iphone 4 is not working after the update to IOS7

Hi guys, can you help me about my problem? My Facetime on Iphone 4 is not working after The update to IOS7 Thanks xxx

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

Videofunction on iphone 4 is not working after the update to IOS7

Hi. The videofunction on my iphone 4 is not working after the update to IOS 7:
Anyone else experiencing the same problem?
Anyone with solutions?
Thanks!

Hey Junie1387,
Thanks for the question. I understand you are experiencing issues with FaceTime. The following articles may help to resolve your issue:
iOS: Troubleshooting FaceTime
http://support.apple.com/kb/TS3367
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
You may also want to reset your network settings:
Settings > General > Reset > Reset Network Settings.
Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
Thanks,
Matt M.

C1-01 not working after Nokia update

Hi,
C1-01 not working after Nokia update.
Message shows "Updating" then blank screen, any ideas?

How did you start the update? OTA or using Nokia Suite?
Try to run the update through Nokia Suite again.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

1080p videos not working after fp2 update

some videos are not working after fp2 update..videos which are worked in fp1 also not working after belle fp2 update...it sucks

What is the phone model?
Could you give us the url to the video on question?

Facebook birthdays not working after ios7 update

Facebook birthdays not working after ios7 update?

Did you always have the same problem or is it new? I always used to be able to get Facebook to work on wifi with no issues for months. I downloaded the new software update for Revolution, and all of a sudden it seems like they blocked the Facebook app somehow unless you're on 4G. It really sux because I can't get into my Zynga games either that are tied to FB! Wish someone at Verizon could be aware of this and fix the problem.
Also, interestingly, when I try to log into the Facebook site with the browser I am directed to an error page. The browser works fine for every other site though. Really seems like there was some kind of block instated that will no longer let you use Facebook on a wifi connection.

Airport not working after osx update-keychain?

Hi airport is not working after the update to osx. I think I hit the wrong button when I saw:
"Confirm Application Change
Airport has updated. Do you want to allow the new version to access the same keychain items (such as passwords) as the previous version?
This chain is permanent and affects all keychain items used by aiport.
Don't Change Change All
What should I have replied? Anyway to reset the airport or download it again?
Thanks.
Anyway to reset this or download again? Thanks.

What should I have replied?
Change All

E7 Nokia Messaging not working after anna update

hi
nokia messaging not working after anna update. when i
-choose provider (hotmail/gmail/yahoo...etc)
-enter username & password
-click OK to T&C
-get error message: "cannot enable this service on the device"
any ideas?

I'm having a similar issue. It appears to only impact Hotmail accounts. For me though, this happened without updating the OS. The email client is simply failing to connect to the Hotmail interface. Only two possibilities, either Microsoft changed something on the email gateway or Nokia changed something on their end. Either way, it's not working and has been out of commission for the past week. If this is how corporate friends get along, I'd hate to see what happens in a adversarial relationship.

Jquery content not working after the updates from firefox

Hi, i've realized that some of my website's banner is not working after the recent updates from firefox, whereas those website's banner is working in google chrome.
Hope there is a solution for this as i'm using the firefox for years and wish this issues can be settle.
The banner URL is http://www.irs.com.my/slider/index.html

SlideDeck has a post on how to resolve this error, caused by a bug in this very old version of their library that you're using. See: [http://www.slidedeck.com/blog/firefox-20-update-and-slidedeck-js-weve-got-you-covered/ Firefox 20 update and SlideDeck.js – we’ve got you covered] for more information. As a Pro customer, you were supposed to get an email notice, but... here you are.
I studied the script before discovering that and found two issues, but there might be more:
(1) slidedeck.jquery.js detects Firefox 20 as Firefox 2 and halts. Note that this regex is the problem:
firefox2:F.match(/firefox\/2/)?true:false
(2) Starting in Firefox 16, the -moz-transform property was unprefixed, that is, you need to use transform for Firefox 16 and later.

Iphone 5 back camara not working after ios update

My Iphone 5 back camara is not working after ios 8.1 update this morning
Only getting some fuzzy image.
Camara was working before the update.
Resting the phone to factory setting restoring phone nothing seems to work
I think this will be my last Iphone as apple never respondse in any case

If you're expecting Apple to respond on this forum, you will have a long wait. This is a user-to-user technical support forum that is only hosted by Apple. This was made clear when you signed up. In any case, try the steps in this article to troubleshoot hardware issues (there is a camera section):
iPhone: Hardware troubleshooting

Elite Pro, CMSS-3D not working after driver update

Similar Messages

Maybe you are looking for