Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Similar Messages

Elite Pro, CMSS-3D not working after driver update

Have changed from an X-Fi Platinum to the Elite Pro and updated to latest drivers and now the CMSS-3D cannot be controlled from the I/O console.
It worked before installing the new drivers.
No other issues other than that.
Anyone else have the problem?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Twist charm swipes not working and other issues

Hi all,
I just got a new Twist a few days ago and am having some issues with it. I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days. I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks, not to mention the shipping hassles.
I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right.
The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
I did notice was that moving to portrait mode would usually work to bring back the swipe functionality. Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
Any thoughts or advice would be GREATLY appreciated!!

Chris Ibsen wrote:
I still have access to the folder, as I still have the external drive.
okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
please post back with results !
JGG

Trouble with 4G and other issues after latest update.

To whom it may concern,
After the recent update I have been having the following problems:
I lose 4G in many places where I was receiving great 4G access before.
Battery life seems to have suffered a little, this may be due to 4G hunting.
New software applications were installed like the Caller ID app, and flipboard. I hate when software is installed without my authorization and then cannot be removed. What year do we live in Verizon?
I have heard on this and other forums that a factory reset does not resolve these issues but Verizon claims that it is the final resolution. We should not have to do a factory reset after an update. I understand that there are many variables to consider with all the apps out there but that is what testing is for. That is why we wait for updates from Verizon.
I will attempt a factory reset to resolve my issues. If this does not resolve the issues I will be contacting Verizon about a refund for the 4G access that I am now being denied.
Thanks
AlphaDanger

Hey AlphaDanger!
The year is 2013 and I read you loud and clear on wanting to make sure your software operates smoothly on your GS3. So, let's make that happen.
Right off the bat, thank you for the details as well as considering a hard reset. But, I'd like to make another recommendation if you have yet to do it. Instead, I'd suggest wiping the cache partition. To do this:
1.) Power off your phone.
2.) Simultaneously hold the volume up key, home key, and power key.
3.) When it vibrates, release only the power key.
4.) When you see the Android recovery menu, wipe cache partition using the volume down toggle and power key to select.
5.) Then select "Reboot System Now".
Please let us know how this goes.
EvanO_VZW
Follow us on Twitter @VZWSupport

Menu Bar Icons Disappeared and other issues after Security Update 2006-001

Hi,
I was really affraid when i've heard about the Safari vulnerability, so I was really happy to see the Security Update 2006-001.
But after installing it, I'm having regrets:
* mouse speed turned to default settings
* system preferences crashes when i try to access to Mouse & Keyboard
* all the menu bar icons disappeared: Bluetooth, Airport, Time, EVEN Spotlight
* Finder is slower...
I've repaired disk permissions but: nothing happens....
What should I do please?
Should I wait?

How did you fix it? I'm having the same problem
myself.
Mandy,
I'm gonna tell you a secret, just like i said my problem wasn't due to the Security Update but because of Front Row.
How? Because, I've hacked my iMac (without iSight) to install FrontRow (with an update), and i've installed the Security Update at the same time. Restarted my computer, and thought the problem was due to the Security Update.
If you did the same thing, here's the trick to remove Front Row:
Delete Front Row (/System/Library/CoreServices/Front Row.app)
Install/reinstall the the latest Mac OS X Update Combo.
This article assumes you haven’t tried installing Front Row before without the use of Enabler. If you have used one of the very early versions of Front Row (ones installed without Enabler):
Delete Front Row (/System/Library/CoreServices/Front Row.app)
Delete the preference file (/System/Library/LaunchAgents/com.apple.frontrow.plist)
Remove any Login Items that launch Front Row (System Preferences >Accounts >User >Login Items)
Disable any shortcuts managed by third-party applications that launched Front Row.
Reboot and reinstall.

Why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My GoFlexPro for Mac external drive will not work and freeze Finder after I switched to Mountain Lion. Anyone same trouble?

My GoFlexPro for Mac external drive will not work and freezes Finder after I switched to Mountain Lion. Anyone same trouble?

Search this site for many reports of problems with GoFlex drives.

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

Photoshop CS4 64 bit - Clone Tool does not work (and other tools)

Hello.
I have been using Photoshop for many years going back to v5. I had used Design Prem Suite CS4 for the past year on an XP machine. All worked fine. I recently moved to WIndows 7 (64 bit) to get the add memory usage. CS4 installs both 64 and 32 bit versions on Windows 7 64 bit. So far all good. Any help would be GREATLY APPRECIATED. I am at a dead end and really have no confidence in getting Adobe's help.
My tools are working erratically, especially the cloning and healing tools. I can't even use Photoshop in its current state and this has been going on now for weeks, no help from Adobe on my lates support ticket post.
I canonly say that the clong tools is all over the place including but not limited to:
* When I sample and then click to stamp, lines shoot across across the image as it I clone a line not a single sample area. These stamps can be the length of the enite image.
* when I sample, then click to stamp, some the stamps occurs on some other part of the image.
* when I sample and the click to stamp, nothing happens. I have to click several times.
* when I sample and then click to stampl, the prior location I stamped has the clone applied
There are more, but this is to just give an example.
Notes:
* I have trashed preferences at least 20 times and the problem immediately reappears
* The problem happens in both the 32 bit and 64 bit version of PS running in Windows 7 65 bit
* The problem occurs with OpenGL tuned on and off
* I have installed the latest PC patch 11.0.1
* I have updated my latest NVidia drives. They are current.
* I uninstalled Photoshop (kept the rest of Suite) and that did not work, and the same problem reappeared. I am not uninstalling the complete suite but the reinstall has error (that is a separate issue)
* I have triple monitors running off 2 GeForce 9800 GT cards. These worked flawlessly before upgrading to the Windows 7 64 bit configuration. When I upgrades, I replaced the processor, motherbaord and moved to 12 GB ram. The graphic cards are the same.
Other tool issues:
* I have similar problems with the healing brush
* sometomes the text tool acts strange. I will click to enter text and a large area opens to enter text instead of just the cursor positioned ready for text. Then other times it works normally.
* the move tools sometimesacts strange. For example, if I try to move some test, the text jumps and moves of the image and I have to find it to drag it back on the image.
Thanks in advance

All I can say is... Boy am I glad I have an ATI card that just works (and that's including Photoshop CS4/CS5 32/64 bit)!
One thing I'm not sure was mentioned above... Try changing your Advanced OpenGL preferences to "Basic" or even turning off OpenGL to see if it affects the issue. Also try disabling the Show Overlay function in the CLONE SOURCE palette.
Best of luck getting to the bottom of these problems, guys. If they run on too long, consider switching brands.
-Noel

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Sound Not Working for ENVY dv6 after recent updates

Not sure if it was the most recent updates that did it or if it was just random, but...my sound has stopped working. OCCASIONALLY right after I restart, I can get the sound to work for a few minutes, but that's about it. (I'm running Windows 8.1, by the way.)
I've tried the troubleshooter and it claims there's no issue. Sound card is there and working as far as I can tell; it's all enabled. I'm not muted or anything quite that trivial. I would try uninstalling an update, but I'm not sure that would even help. Prior to the update, my sound had started becoming distorted at time and a little crackly. Nothing too drastic or often, so I wasn't too bothered. Obviously, I am bothered by a complete lack of sound.
I have no idea whether or not headphones work still. I haven't been able to get the speakers working long enough to try them. "Fixit" claims it won't work with my computer, so I can't try that alternate troublershooter.
I've read every message board imaginable and updated and re-updated all my drivers. Not the issue. I have no idea what's wrong and no idea how to fix it, but it needs to be fixed.
Any help would be appreciated.

Hello @samajama,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how the sound coming from your notebook's speakers is not working, and I would be happy to assist you in this matter!
To restore the sound to your notebook's system, I recommend following this document on No Sound from Speakers (Windows 8). This should help to address a specific Microsoft update that has caused sound output issues.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

X-Fi Elite Pro external thing not working prope

The external part of my elite pro (dont know what its called) is only working somewhat. I can hear music from it with headphones but if i try to adjust volume or any of the settings (crystallizer, CMSS-3D, etc) it wont work. I can use the remote to adjust the volume but otherwise nothing else works. I've reinstalled the creative software and made sure everything was plugged in correctly.
Any help appreciated.

Check that CTXFIHLP.EXE is running and that you haven't disabled it from the startup, killing that process renders useless the digital knobs in the console.

X-Fi elite pro, suround sound not working correc

I have a strange problem with my suround sound. I have an X-Fi elite pro sound card and 5. Z-5500 logitech speakers. Everything seems ok except my rear right speaker doesnt pick up the suround sound portion of the sound. When I play music it has sound but when testing for the suround sound that speaker gets nothing. Games are strange, the ambient sounds that are on all speakers at once work fine but when rotating around it clearly is missing the sound effects in that quadrant. I put my audigy 2 back in and everything worked ok so I know its not my speakers.
Is my soundcard defecti've or is there some setting I need to adjust?
Thanks.

It seems that you've bumped an old thread... So, did the original poster ever find a solution? I have an Audigy 2 ZS Platinum right now and can't that to work. I ordered an X-Fi XtremeGamer Fatality Pro, which if all works well I'll hook up to my current dri'vebay. I've heard there's no reason why it shouldn't... other than the fact that I'm running Vista of course, which doesn't have any remote functionality that I know of.

Mac OS X Server 10.6.7 update - Time Machine not working and other trouble.

I've upgraded my mid 2010 mac mini server to 10.6.7 with server Combo download.
After installation (without any errors) i've detected this troubleshooting.
Time Machine (backup hd is the 2nd 500GB Hd of mini server) dont work more and
display error message that suggest to verify hard disks (done with no errors detection).
Mac Help display white page.
And if try to install Server Admin Tools, installation utility not recognize system HD and cannot be done.
The mac mini server seems however works and services seems works rights. Can be rebooted without problems.
I've tried to backup the system disk on the second hd with Carbon Copy Cloner without problem and it recognize system disk well.
I've upgraded also two others mac minis (mid 2010) with standard 10.6.7 version (no server) and a macbook and a macbook pro without problems (but i've not tried time machine on them).
Thanks in advance for any help!

I know the problems with Time Machine on Mac OS server. In your case: Look at the log files, searching for "backupd", if that tells you anything.
In my case, Time Machine in the last year stopped several times. Occasionally, there was a helpful message in the log files where I could identify a file where it had hung -- typically intermediate build results of Xcode. After excluding or deleting the offending files (where possible), Time Machine ran successfully.
Another situation which has repeatedly occurred is that time machine just hangs and does not progress, and no log entry helps. In 3 such cases what helped was to delete the spotlight index (e.g., with TinkerTool System) and let it rebuild. It took inordinately long (10 hrs) and there were log entries by mdworker that it had difficulty processing files. But when the spotlight index was finally rebuilt, Time Machine worked again.
BTW: I don't need Time Machine to backup the server system, for that I run mirrors etc., but for user files it is most convenient and has helped several times. Thus I have excluded nearly everything but /User/*.

Nokia 701 menu button not working and other bugs

I have a "brand new" 701 with 111.020.0307 that won't update to 111.030.0609 because I'm in Italy .
Now I have a really annoying bug: the menu key, sometimes, stops working and won't bring up the menu if pressed briefly, and won't bring up the task list either (when pressed long).
Anyone experiencing this bug? The only way I found to make it work again is turn off and on again my phone... And the task list can't be found in menus, AFAIK. I could do that with my old 5800XM...
I bought my phone ONE WEEK ago... I really wouldn't like to format/reinstall already! Ideas?

soft reset may solve it. Look in settings and phone management.
Dont have to do a hard reset first. After soft reset, try reinstall the latest firmware through nokia suite if soft reset didnt solve your problem..
I have 701 and I am impressed overall with the device. Actually... I am very pleased with it.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Elite Pro, CMSS-3D not working and other issues after driver update

Similar Messages

Maybe you are looking for