Elite Pro doesn't work with 5.1 setti

Hi, recently i have changed my card from xtreme audio to elite pro
It was working fine during xtreme audio when i set all to 5.; when i changed to elite pro, the 5. setting doesn't work.
The center speaker sound comes out from woofer, and the woofer is working as it should..
My only problem now is center speaker doesn't work with elite pro.. Is there any solution?
I have newest drivers, all installed well without error; I have check all the jacks and they are well plugged..
I have tested all the speakers, no errors, changed back to my old card and it works well with 5.
Please help?

For some reason, this resolved itself today.
It still occurred with 10.10.2, and I returned to the Apple Store to have it looked at.  After checking, their assessment was that it was something to do with Yahoo servers, for that account.   They referred me to Yahoo.   
This morning, the Inbox loaded!!! The issue is now fixed.   I hope others are seeing their issues resolved as well.

Similar Messages

  • M-Audio Fast Track Pro doesn't work with OS X Mavericks Garageband or MainStage 3

    I used to be able to use MainStage 3 and Garageband with my M-Audio FastTrack Pro with no problem. Then, when I upgraded to OS X.9 Mavericks, it doesn't work. Avid (who now supports the FastTrack Pro) recently came out with an updated driver that supposedly upgrades for OS X.9 Mavericks (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers), but even after downloading/installing the driver and updating the device, I still can't get it to work with Garageband or Main Stage 3.
    It seems that the software sees the M-Audio FastTrack Pro USB, I even see an audio signal in both MainStage 3 and Garageband for my guitar or microphone input, but there is no output sound from the FastTrack Pro to my PA system other than the analog sound (no sim amps or vocal effects work).
    Anybody been able to solve this problem?

    I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
    After trying several combinations, I found out an non logical solution, but it did work
    What I did:
    1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
    2) Uninstall Fast Track Pro Drive and restart computer
    3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
    Hope it helps!

  • Acrobat X pro doesn't work with Yosemite

    I use Acrobat X pro on mac OS X , and  I updated to Yosemite . Since this update, I can't use Acrobat pro . When I want to edit a pdf, the window displaying "Software license agreement" appears....no way to modify a file. I checked: I have the latest update . Will an update soon solve this problem? Thanks

    Nope !
    I filled out the form each time, and each time the window is displayed again, and so on
    I can't edit anything
    You may notice that I have no problem with other CS6 applications
    thanks

  • Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro

    Cinema Display (clear) with DVI/ADC box doesn't work with MacBook Pro when plugged in with a dvi to mini dvi cable. Any ideas what to do to make it work? I lugged the 23" 2500 miles into the wilderness and I need help

    Okay, here's an update: the DVI to ADC adapter does work with the Apple displays that I have tried, but it won't work with the Formac. I have tried multiple time to contact them, but to no avail... they don't even respond to threats of posting my opinion of them, which is this:
    DON'T BUY ANYTHING FROM FORMAC! They make quality products, but their customer service is a big time joke! They won't take care of you.

  • Apple Keyboard with number pad doesn't work with Mac Pro?

    I have a Mac Pro, and have used an Apple Keyboard with a number pad (not bluetooth) with it for quite a while, with no problems. But then my keyboard broke and I ordered a replacement Apple Keyboard with a number pad (not bluetooth). This keyboard doesn't work with my Mac Pro. I have it plugged in, but I can't get the Mac Pro to consistently recognize that there is a USB keyboard connected to it. What magical stuff do I have to do to get the keyboard to be fit for purpose?

    It would not hurt to try an SMC Reset. (But if it does not help, it adds credence to lllaass assertion that the keyboard is not working.)
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and  MplayerX and etc

    I face to this problem since new OS, Yosemite has installed on my mac book
    some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and  MplayerX and etc
    For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard  or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
    Please help me
    tq

    Same thing here with MPlayerX (annoying)

  • Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro

    Since Prelude doesn't work with Red footage, how can I add logging info to a file in Premiere Pro CS6?

    RED footage has a restriction on metadata.  We are looking into what it would take to get full metadata support into our system, but you cannot tag red footage at this time.

  • HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

    i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

    That's why, you will need to upgrade to 10.8

  • HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    The Airplay icon will not display if the OS is unable to locate any Airplay devices.
    I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
    Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

  • Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

    Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

    If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM.  Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone.  If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

  • New airport express doesn't work with Nintendo DS

    I just picked up a new Airport Express. The WEP setting doesn't seem to be standard. Instead it is this Transitional Security Network that doesn't work with the Nintendo DS or the Netgear WG511T card I have. Any ideas on how to get it to work?
    15" MacBook Pro 2.16GHz   Mac OS X (10.4.9)   7200 RPM HD

    yeah, the DS just ***** like that. Nintendo should have given it firmware upgradability.

  • IPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    iPhone 5 doesn't work with Mac OS 10.5.8 - do I need to ugrade to 10.6 and then upgrade to Mountain Lion or can I just upgrade to Mtn Lion right away?

    At least to 10.6.8. You must do this to upgrade to Mountain Lion.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • Macbook pro doesn't work after EFI update.

    My new macbook pro doesn't work. I bought it yesterday and after I've installed EFI update (it installed without any errors) my mac
    "starts" with blank screen, no chime sound, with fans on (I guess - it's full speed). I've already tried those tricks with command+option+p+r and it neither work nor bring my mac to "life". Any ideas what this issue could be?

    I've got the same problem but with QT player (not PRO version)
    I've installed the 7.1.2 update for quicktime and the audio and videos files on the net doesn't start I've got a "?" then I go to the quicktime prefs and I see that the entire QT plugins disapear
    Besides the audio files and the video files on my HD work
    so ,is someone can help me for finding the whole QT plugins ?
    If it was impossible ,I suggest you to make a 7.0.4 reinstaller for 7.1.2 for Quicktime

  • Buffalo Nas Navigator2 doesn't work with Mavericks

    Hello,
    On my Mac Pro (5.1) Buffalo Nas Navigator2 (v2.69 & v1.71) doesn't work with Mavericks :-(
    The window opens and closes immediately (approximately 2s).
    According the Buffalo support, all the versions works with Mac OS (including Mavericks ?)
    Thank you for your help.
    Regards
    Olivier
    PS: the firewall is not enabled

    Hello Mark,
    Thank you for your message.
    For your information, I have no problem with the Finder (I don't use cifs), I can see my LinkStation. The problem is only with Nas Navigator.
    Yesterday I tried to use LinkNavigator: Link Navigator installs Nas Navigator and tried to connect to the Link Station, and I could see a message like "no Link Station found on the network" while I have 4 Link Station :-(
    I believe that Finder and Nas Navigator do not use the same protocol.
    It's curious that the support of Buffalo are not aware about the problem between Nas Navigator and Maverick.
    Olivier
    PS: I also use fixed IP ;-)

  • Cant open logic 9,get a message saying logic doesn't work with osx lion 10.7.5

    I'm running OSX Lion10.7.5 and I reinstalled Logic 9 and a message comes up "logi 9.0.0 doesn't work with this OSX", I first installed Logic when I had OSX 10.5.8 and it worked.

    Update Logic Pro 9.0.0 to 9.1.8
    I assume you are using the boxed DVD set so here is the appropriate link....
    http://support.apple.com/kb/dl1601

Maybe you are looking for

  • Videos online won't work on my new 2013 13" Macbook Pro

    Wifi works perfectly but videos won't show up. Youtube, Hulu+, etc all don't work-- every time I load a page with a video on it, the place where the video is displayed just shows a black square. Nothing happens when I refresh the page/quit out/click

  • Templates not updating other documents

    Help please.  my site that has three templates - 1 main and two nested are not updating the children pages.  what could possible cause this?

  • Send HTML mail with an image

    Hi there, I'm trying to send html mail with an image. I'm able to see the image but in another section, at the very bottom of my message. Is it possible to display the image in the main part of my message ? Here my code : MimeMultipart multi = new Mi

  • Hide / show grid in a graph programmaticly

    I would like to hide / show the grid (minor / major) progammaticly. I try to create a property node, but I don't find the way to access the 'hide' property... Thanks.

  • Copy paste option update

    I have c2-03 handset. This handset not support copy paste option in creat massage option. I request to nokia please attach this option when next time software update.