Elite3D and PC-Monitor

Hello,
I've some problems with my Ultra 10 + Elite3d Card. I want to use a normal
PC Display (an old 17" Display) with a 13w3 adapter. But it doesn't work. I
have no screen or the screen flicker very strong. What Can I do?
Thanks
Marcus Lorenz

My own opinion: You use the monitor without multisync mode. It means Your monitor doesn't have ability to detect such parameters as "Resolution/Refresh Rates" of Elite3D automaticaly.
Solutions:
1. (Very simple, but ....) Change the monitor from old to some new model with autodetection of the "Resolution/Refresh Rates". And make sure Your new monitor has one (or more) of the "Resolution/Refresh Rates" value (s) of Elite3D (for example, 1280x1024@75Hz) in its support mode list.
2. On the old monitor: by hand try to set one of the default (default for Elite3D) "Resolution/Refresh Rates" value and connect monitor to Sun.
Good luck!
P.S. Send me the old monitor model name.

Similar Messages

What is difference between BP monitor and supplier monitor?

hi friends
what is difference between BP monitor and Supplier Monitor
what is tcode for BPmonitor
Regards
Vinny

Hi Vinny,
Please refer to the following links. These seems useful:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
The specified item was not found.
New Business Process Monitoring functionalities in SAP Solution Manager ALE / IDoc Monitoring
Regards,
Saumya

Macbook Pro and External Monitor flashing?

I am using a Macbook Pro with an External Dell 1908fp 19" monitor via a Thunderbolt to DVI adaptor all fine.
However the annoying niggle I have is that the monitor which seems fine, keeps flashing intermittently on and off randomly?!?
Would anyone know why this is happening and if its the Mac's fault? I have the MBP open and the Monitor as the 2nd screen at 1440x900 which it seems to have defaulted to, and its very clear on both screens.
Is my monitor on its way out? it seems ok, and is quite new (though it was 2nd hand a couple of years ago) or is this a known Apple issue?
Thanks for any help

The graphics card in the MBP supports resolutions far greater than that of the internal display, so any modern monitor will work fine - up to and including Apple's excellent (but pricey) Thunderbolt display and Cinema display.
The MBP will detect the external display and set the image to the correct resolution automatically, or you can choose the resolution in System Preferences -> Displays, so you don't need to worry about a black border.
Most modern monitors are 1080p and this works perfectly as an external display for a MBP. You will need a mini-displayport to HDMI cable to connect the two. If you get a monitor with built in speakers then that cable will also transfer audio.

Wily Introscope is not running in Solution Manager 7.1 and tech monitoring

Hi Experts,
we are able to log in wily introscope, But metrics(values) are not coming in wily
we re started the solution manager server, that port is working fine now, Please assist me on this to fix issue find log as attachment.
2)we configure the technical monitoring in our solution manager system but metrics are not coming for dialog response time in dash board. which extractor i need to check how to troubleshoot,
thanks in advance for you help
Best Reg

Hi Srivastav.
Actually i am new to solution manager, and we have done basic steps of solution manager like
system preparation,basic configuration,managed system configuration and technical monitoring,
in tech monitoring system monitoring,and EUEM and we are planing to perform DVM and RBPD,
my solution manager system is installed on windows 2008 server, version is 7.1 SP 7,
currently we facing issue in wily introscope and technical monitoring dash boards metrics are not appearing and please tell me how to close the thread ,
Best Regards,
Hanuman

Viewer and External Monitor doesn't playback at same time

When watching clips in the viewer window, they playback fine. But on my external monitor, it only shows the first frame from when it's played. when I stop playback, the external monitor then shows the last frame the Viewer window is stopped on. How can I fix it so that the viewer and external monitor playback the clip at the same time?
At the moment we're digitizing footage with the Offline RT Photo JPEG codec set to 75% quality.
A few days ago we were digitizing footage at 35% quality and that footage plays back fine. We moved to 75% quality at the editor's request. A few days ago we had created a few sample 75% quality tests for the editor to view. I loaded those clips into Final Cut right now and they playback fine as well. So it's all of a sudden just these new clips created yesterday :S.
Message was edited by: Phillip Roh

Yes.
Forgot to mention that the timeline plays all the footage back properly on both the canvas window and the external monitor. Sorry for not mentioning that sooner.
More discoveries! The playback 'freeze' only happens if I open a clip from the browser into the viewer. If I open a clip from the timeline into the viewer, it plays-back fine!
Message was edited by: Phillip Roh

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

Windows 7 and Multiple Monitor Issues

Alright, I have spent the past 3 days searching these forums as well as on Microsoft's support pages and all of Google to find the answer to my issue and it seems as though I'm the only one who is running into this problem.
I have a 15 inch Macbook Pro with the GeForce 9600M GT Nvidia Graphics card with the latest version of Mac OSX and Bootcamp installed on it. I have Windows 7 installed in bootcamp. I just purchased a Mini DisplayPort to VGA cord with a VGA cord so as to connect my computer to my Sony Bravia HDTV to use as a second monitor. I plug in the cords, plug them into my TV, and put it into the proper input and it works like a charm. Then I go and boot up in bootcamp under Windows 7, plug in the cord, and my screen gets to the "starting windows" logo and then it goes black. I push ever button, I try control alt delete, nothing. I have to hold down the power button to turn off the computer and then turn it back on.
I turn it on, boot up into Windows 7, let it load, then plug in the cord, and the computer display instantly goes black, again, and yet nothing displays on the TV. Again, I try everything to no avail, so I power it off and back on. I go through this at least 10 times to no avail. I finally give up and try again the next day.
Next day, I plug it in, and the monitor stays up, but yet nothing is displayed on the TV. I go to my resolution settings in Windows, and go to the multiple monitors tab, and select every possible option (extend, duplicate, etc) and nothing will display on my TV. I try to change the settings to which it responds with "unable to save display settings" and nothing changes. I attempt to enter the nvidia program and make changes that way. The TV is detected, but when I select it and attempt to apply anything, no changes take effect and I am left with only the laptop display. Keep in mind I uninstalled and reinstalled all of the video drivers and such.
Finally I get fed up so I purchase a Mini DisplayPort to DVI adapted and a DVI to HDMI adapter. I try again. Again in OSX it launches immediately, no problems. I go back into Windows, and immediately I'm dealing with the instant black screen.
I'm going crazy over here trying to figure this out. I know it's possible to do this because I've seen people on youtube doing this and again it works on OSX so why the heck won't it work? If anyone has any idea what's going on here please help me out. Thanks.

JonMarx... I'm having the exact same problem. I'm in the exact same situation as you are. I'm going mad, and it's only by divine providence that I've finally located the only other person who knows what I've been going through. I've spent at least 20 hours trying to get this started back up, to no avail.
I had the secondary display working peachy for a while, long enough to configure everything to be exactly how I wanted it. I unplugged the monitor from the computer just to see what would happen, and that's when the problems started. I managed to get it to work one last time for a brief period a few hours later, but the way it just clicked on made it feel too good to be true.
I've had a wierd problem with a phantom display as well. The display will frequently show up as being available in both the nVIDIA panel and the windows settings, but if I apply the settings, they won't go through. I got a few screenshots of it the last time it happened.
I was just about to reinstall windows completely, but it seems that I'll just run into the same problem again if I do... Here's to hoping a solution is found.

I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board?

As i had said, I have an Apple Powerbook G4, and my monitor doesn't function. I have an external display Monitor, however it's stuck in extended screen mode. How do I get it to mirror or duplicate the display without use of the on-board? Is there a Fn key combo i'm missing or is the issue more serious then i realize? any and all help and hints would be greatly apprichiated, thanks in advance.
-Powerbook User

The PowerBooks have an F-key that toggles mirrored and extended mode. My PB is loaned out right now but I think it was f7. The keycap has an icon on two overlapping rectangles, as I recall.
EDIT: Yes! Found a pdf of the PB manual it shows F7 is the toggle:

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

My Program and Source Monitor Stopped Working: Premiere Pro 2014

Heres how it all started.
I got an error which said I didn't have the correct video modules, then came the ugly face of BSOD. I restarted, tried again, same result. I did a system restore with Windows, reinstalled Windows 8.1, reinstalled all of my plugins and Adobe CC programs, and when I opened my project was completely scrambled. Uninstalled all Adobe software, ran CC Cleaner, reinstalled. This got the audio in my videos to work but now there's only a white screen on my my Source and Program monitor when I try to play my timeline. I did another system restore on Windows, went to my laptop manufacturers website and updated my bios, graphics driver, and processor. Also reinstalled windows updates, and my Adobe software, I've tried CC Cleaner before each install, tried going back to the previous version of Premiere and still nothing in my source or Program monitors.
MSI GE70
Intel Core i7 4700MQ Processor
NVidia GeForce GTX 765M / 2GB GDDE5
12 GB Memory
using .MTS footage from a Canon C100
Premiere Pro 2014.2
Things I've tried from other threads:
-I read that there might be a problem with the .MTS files so I've also tried starting a new project with .MOV files and h.264 and still nothing.
-I tried going into the project settings and choose "render with software", still nothing.
-I tried emptying media cache files under C://users/my user/app data/roaming/Adobe/common.....you guessed it, NOTHING.
-I tried using my daughters "Frozen" magic wand we bought her for Christmas to fix the problem with icy magic like Elsa did in the movie.......surprisingly, still nothing.
Any other ideas out there?

Hi,
Do you have Dual Graphics Adapters? You can check that under Device Manager > Display Adapters.
If yes, Disable Intel Graphics and see if it helps.
Have you tried to Trash the Preferences?
Rename the 8.0 folder to trash the preferences: <drive>\Users\<username>\AppData\Roaming\Adobe\Adobe Premiere Pro\
Thanks,
Rameez

Macbook Pro and Samsung monitor

I bought a Samsung 22inch monitor. It works for my old G4 with VGA analog, but if I hook my MBP to the monitor through DVI all I get is my screensaver on the monitor. I tried detect monitor and nothing happens. Any thoughts ?

The reason is that the second monitor has extended your desktop. It is extra space. If you haven't moved something to it, it's still empty. If you were to close the lid and then wake up the MacBook Pro, then everything would appear on the external monitor. Or if you went into your Displays preferences and dragged the little menu bar icon from one display icon to the other, your menu bar would move to the other monitor. Or you could turn on mirroring and both monitors would show the same thing.

Satellite A100-646 and external monitor shows black screen

Hello to everybody,
I have a similar problem with A100-646 (bought in Italy). Laptop's LCD and external monitor shows black screen but system boots without other problem. When laptop is not used for a long time (half a year) it work for one week without any problem.
Unfortunately, there is no proper service in a place where I live. Perhaps, there is a problem with power supply.
Is there other idea? Does anybody have a service manual? ([email protected])

It is not easy to find shop where you can order original and new hardware components.
Best source for such parts is definitely eBay where you can buy used but well working components.
Upgrade? You must know that upgrade on mobile computers is not the same as on desktops. Cooling possibilities are not the best and each notebook model has optimized cooling system for original parts. So new graphic card can be more powerful and produce more heat and it is definitely not good for your notebook. So best thing you can do is to replace it with original part.

Viewing footage on desktop and external monitor at same time

Maybe i'm missing something, but is there any way to view footage simultaneously on your desktop monitor and your external broadcast monitor (via blackmagic output)?
Right now when I enable mercury transmit, the viewer within speedgrade goes to grey and I can only see the footage on the external monitor. This makes it impossible to draw custom shapes around objects (rather than just use the stock circle masks) which I use quite a bit...I would like to have the view on both monitors like I have in resolve.
If this isn't possible, is there a quick shortcut to toggle mercury transmit on and off without having to go into the settings menu?
Any help would be appreciated...I am enjoying a lot of the controls that are in speedgrade but there are some workflow hurdles that I need to get over in order to be able to use effectively in client sessions from time to time.
Thanks!

I waited expectantly and patiently for Adobe to enable Mercury Transmit in SG and to be able to make use of my BM card and external monitor.
O.K we got it in CC2014.1...but it is either Mercury Transmit or Dual Display!
I think this half-arsed solution is an absolute fail that we cant use desktop and an external monitor simultaneously.
Has anyone on the SG team actually been in a real world CC and Grade Suite?
At least we got consistency with the blue color scheme if not how Mercury Transmit works across the suite of apps.

Video card to run 2nd and 3rd monitors cs5.5

Hello all,
I have a powerful system with multiple hard drives that I use to cut HD DSLR footage on in CS5.5. My GTX 570 runs my 1st monitor and my 9600GT runs the 2nd and 3rd monitors with great success.
1st monitor = timeline
2nd = bins
3rd = full screen preview (Highest quality preview)
The reason I use the gtx 570 to run only the first monitor is because it idles much higher and hotter connected to two monitors. (Disables the down clocking feature on the card when connected to multiple displays).
Well the 9600gt has died.
I don't want to spend alot of money here but I am not sure what video card I require for my 2nd and 3rd monitors. Keep in mind the 3rd monitor is the full screen preview.
I know premiere pro uses my 570gtx for the MPE but I have no idea how this effects (if it does at all) my 3rd preview monitor since I have had it plugged into my 9600gt.
There for I am not sure if I can get away with a cheap card like a $50.00 Nvidia GT 610 or do I need something at least equal or greater then my old 9600gt?
Thanks!,
Kieran

Thank you for the reply Harm. I have an x79 board with a 3930k @ 4.6ghz.
I will take that advice on board.. I might have to fork out a bit of extra money. Shame I only purchased the 570 gtx a couple of months ago!
Found this card....
Gainward GTX550Ti 1G DDR5 DVI HDMI
Internet Price:    $111.00
Barcode :
426018336-2050
GPU :
GeForce GTX 550 Ti
GPU Clockspeed :
900 Mhz
Memory :
1024MB GDDR5 192bits
Memory Clockspeed :
2050 Mhz
Pixels per clock (peak) :
N/A
Bandwidth :
98.4 GB/s
Ramdac :
400 MHz
PCI-Express 2.0
Cooling :
2-Slot Fan
Video-Features :
HDMI
Connectivity :
DVI-I + VGA
Would this be sufficient??
Thanks!!
Kieran

New computer and video monitors for HD and PP CS5.5

Dear All,
I have recently updated to Adobe Creative Suite 5.5 Master Collection to work in conjuntion with Final Cut Pro. I've been working with a Canon XL-1s, taping with mini-dv format in Standard Definition up to this time but am thinking of buying the Panasonic AG-AC160 AVCCAM and upgrading to High Definition.
I'm working on a Mac Pro and have been using a View Sonic computer monitor and a Sony Video Monitor that I've had for years -- left over from the old analog video tape days, but it still seems to do the job well.
I'm learning Premiere Pro CS5.5 and the suite seems to be working o.k., so that is not a problem at this time.
My question is: If I start working in high definition, do I need to change my computer and video monitors in order to get professional results from my editing software? I have done documentaries and want to do them in high def and have the best video for podcasts and mobile applications.
I don't want to spend another gazillion dollars on monitors if I don't have to, but I do want to provide the best video that I can and I will buy what I need.
Thanks for your suggestions and any info you can provide.
Small Town Gal

Dear taz291819
Thanks for your help. I have one more question. Do I actually need two monitors or will the computer monitor serve as a video monitor? I'm used to the old analog process of viewing the final video on a video monitor, but with HD, I would think that the computer monitor would give the same result as a separate video monitor. My ViewSonic would work, I'm sure, but it's a bit small for the HD format and I would like a bigger screen to work on. So, can I just use the computer monitor for editing and viewing the final product?
For Harm Millaard, I just think that HD will produce a better final product in small formats viewed as podcasts or on mobile phones -- plus almost everyone wants everything in HD now, and for some of the things I will be doing, it will undoubtedly give a better product. I want to upgrade my camera anyway, so I want to go to HD.
Small Town Gal

Elite3D and PC-Monitor

Similar Messages

Maybe you are looking for