Elitebook 840. Unable to install bluetooth driver

Hi,
I'm not able to properly install bluetooth driver on Elitebook 840, and Bluetooth devices do not appear in Device Manager.
what was done already:
1. HP drivers were installed from: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5405363&sp...
2. Intel® Dual Band Wireless-AC 7260 802.11ac (2x2) WiFi and Bluetooth® 4.0 Combo32 from ofitial intel page.
3. all bluetooth services are up and running: Bluetooth Support Service, Bluetooth Devvice Monitor, Bluetooth Media Service, Bluetooth OBEX Service.
How to install properlu bluetooth driver, so that bluetooth device will appear in device manager, and/or on system tray?
Operation system: Windows 7 (64) Enterprise.

Hi ebogdanov,
Welcome to the HP forum, I hope you have and informative experience.
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

  • Trying to upgrade to 7.7, unable to install to drive F

    I am trying to upgrade to 7.7 and the download comes in but the install fails saying "unable to install to drive F". How do I change this as my current itunes is on drive c. No drive F is available.

    Hello FlaOne,
    Welcome to the HP Forums.
    I see that you have downgraded the operating system back to Windows 7.
    So I can better assist you, please respond with your printers Model Number:
    How Do I Find My Model Number?
    Once I have the printer model number, I can then research the issue and attempt to find suitable troubleshooting steps.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Computer unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    My computer is unable to install device driver software for iPhone 3GS, where do I locate the software? As my phone is in restore mode following update through iTunes...

    It's included in the iTunes installation bundle. Re-download and re-install iTunes on your PC.

  • Satellite P750: Unable to install Bluetooth Stack driver on Windows 7 (x64)

    Hello.
    I own a *Satellite P750-02T* (Part no. *PSAY3A-02T001*).
    In the order what I did:
    1) I formatted its HDD and reinstalled OS to *Windows 7 x64 Ultimate SP1*.
    Then I downloaded *ONLY BIOS and the drivers* from [its Downloads page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] :
    2) I updated its BIOS to *v1.90* (the laptop came with v1.80)
    3) I installed all the drivers:
    - both LAN and WiFi
    - Intel Chipset (latest available)
    - all video drivers (Intel HD Graphics, NVIDIA Graphics, and Intel HDMI)
    - Card Reader
    - Realtek HD Audio (latest)
    - Synaptics Touchpad
    - USB3.0
    - IR
    - TV-Tuner
    However, I'm *unable to install the Bluetooth driver (v8.00.06(T)* )...
    When I run setup from the [above-mentioned page|http://www.mytoshiba.com.au/support/computers/satellite/p750/psay3a-02t001/download?os=25] it partially detects *'Bluetooth USB Controller-10 from TOSHIBA'* (USB\VID_0930&PID_0215&REV_001)
    and then installation simply freezes displaying +'Installing the Bluetooth Driver. Please wait+.' and stays like that forever...
    I also tried downloading a driver from [another location|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba] for TOSHIBA notebooks - v8.00.02(T):
    and followed installation instructions displayed under 'Details'
    but there was the same outcome - the setup simply freezes...
    Installing Hotfix (*KB978258*) recommended there didn't work either - the message '+The update is not applicable to your computer+' pops up.
    And I understand why - this Hotfix is [already included|http://download.microsoft.com/download/E/B/A/EBA55FE2-373A-4351-9346-6D762B79AA69/Updates%20in%20Win7%20and%20WS08R2%20SP1.xls] into Service Pack 1 for MS Windows 7.
    I spent hours searching on the Internet for a solution. Although there were some similar cases none of the recommendations actually worked. I tried installing:
    - WiFi driver before installing Bluetooth (someone suggested that those two are the parts of the same card);
    - resuming installation in Safe Mode;
    - *Toshiba Value Added Package* hoping those tools somehow will kick in.
    Nothing worked...
    It's interesting that when for the sake of experiment I tried to run installation for my generic Bluetooth adapter (using the driver [for non-TOSHIBA notebooks|http://aps2.toshiba-tro.de/bluetooth/index.php?page=download]) then everything run smoothly!
    *Using Bluetooth connection on this laptop is very crucial for me.*
    I hope I shall not have to return this wonderful notebook as I know TOSHIBA is one of the best manufactures and am sure there is a solution to this problem.
    Thank you very much.
    Evgeny.
    Message was edited by: CVD
    clarified about using another generic Bluetooth adapter with non-TOSHIBA driver

    For FN functionality you must install Toshba Value added package. Toshiba flash cards utility is part of this package.
    I dont know if P750 has WLAN switch but before you start BT installation be sure WLAN LED is ON.
    BTW here is installation order for Win7 on Satellite P750 (European but the same order must be for your Australian model):
    Win7 64bit SP1
    PatchFiles V1.0
    PlayReady PC Runtime V1.3
    Sun Java2 Runtime Environment 1.6.0_20
    TOSHIBA Assist 4.02.02
    TOSHIBA Bulletin Board 2.1.10
    TOSHIBA ReelTime 1.7.17.0
    Intel Chipset SW Installation Utility 9.2.0.1015
    Intel Management Engine Interface V7.0.4.1197
    Intel Display Driver 8.15.10.2353
    NVIDIA Display Driver 267.44
    Intel Rapid Storage Technology Driver 10.1.2.1004
    TOSHIBA Supervisor Password Utility 1.63.51.2C
    TOSHIBA HW Setup Utility 1.63.1.34C
    TOSHIBA Flash Cards Support Utility 1.63.0.12
    TOSHIBA Value Added Package 1.5.4.64
    NVIDIA HD Audio Driver 1.1.13.1
    Realtek Audio Driver 6.0.1.6305
    TOSHIBA Wireless LAN Indicator 1.0.3
    Intel Wireless LAN Driver
    Synaptics Touch Pad Driver 15.2.11.1
    TOSHIBA HDD Protection 2.2.1.13
    Atheros Bluetooth Filter Driver Package v1.0.4
    Bluetooth Stack for Windows by Toshiba v8.00.06(T)
    Realtek LAN Driver 7.038.0113.2011
    Jmicron Card Reader 1.00.57.02
    ENE CIR Driver V3.2
    YUAN DVB-T/ATSC Tuner Driver V2.3.3.41
    USB3.0 Driver 2.0.34.0
    TOSHIBA Sleep Utility 1.4.2.7
    TOSHIBA Face Recognition 3.1.9
    TOSHIBA eco Utility 1.2.24.64
    Intel Proset 14.0.2.0.1.s64_wCAT
    TOSHIBA HDD/SSD Alert 3.1.64.8
    TOSHIBA Service Station 2.1.52
    HDMI Control Manager 2.0.0.7.64
    TOSHIBA Remote Control Manager 3.0.6.1
    TOSHIBA PC Health Monitor 1.7.5.64
    ConfigFree
    TOSHIBA Web Camera Application
    TOSHIBA Network Device ID Registry Setting Tool 3.0.32.4-14_wMSI
    TOSHIBA Media Controller 1.0.86.2
    TOSHIBA Media Controller Plug-in 1.0.6.1
    TOSHIBA Resolution+ Plug-in for Windows Media Player 1.1.0
    Intel Wireless Display 2.0.29T2
    PatchFiles PCIIDEREG-1.2
    PatchFiles
    I hope this will help you a bit.

  • About installing bluetooth driver

    I have installed the railink bluetooth driver from the hp site. The setup has been installed but i am unable to find the option of bluetooth in the change pc settings option. Also when i checked the device manager i found that railink bluetooth PCIe adapter is working properly on my laptop. At the same time i found that PCI device driver is not available on the system and i am unable to find PCI driver on internet for my laptop. Please suggest something.

    Hi @amit3 ,
    Welcome to the HP Forums!
    It is a super place to find answers and information!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that you have installed the Bluetooth driver for your notebook but are unable to find Bluetooth options under PC settings.
    When you checked Device Manager you are missing a PCI driver and have been unable to locate one.
    When I checked the specifications for your notebook I see it came with FreeDos 2.0.
      HP 15-r033tx Notebook PC Product Specifications
    Did you install Windows 8.1 from a retail copy ?
    Have you done all your Windows updates?
    Here is a link to the recommended HP drivers for your notebook HP 15-r033tx Notebook PC.
    If you choose the scan now options it will provide a list of the recommended software and drivers to install.
    If after you have completed any software installation you still do not see your Bluetooth options you can try these steps..
    Step 1. Go to device manager
    Step 2. Right click on "Bluetooth Peripheral Device" that you want
    Step 3. Select "Update Driver Software..."
    Step 4. Choose "Browse my computer for driver software"
    Step 5. Choose "Let me pick from a list of device drivers on my computer"
    Step 6. Select "Ports (COM & LPT)"
    Step 7. Select "Microsoft" at "Manufacturer" list
    Step 8. Finally select "Standard Serial over Bluetooth link"
    If you are still unable to pair with a Bluetooth device try the following:
    Step 1. Search for "Change device" in the Windows 8 Start menu.
    Step 2. Click on where it says Change device installation settings.
    Step 3. Select the No, let me choose what to do option.
    Step 4. Check the automatically get the device app option
    Step 5. Click Save changes to save the settings you just chose
    As well you can try this
    Step 1: Go to RUN (Windows Logo + R) and type “services.msc” and Enter
    Step 2: Now find “Bluetooth Support Service” and double click on it
    Step 3: Now click on Log On Tab and Type in "Local Service" without quotes
    Step 4. Click on “This Account”
    Step 5: Now remove any passwords leave the password field blank
    Step 6: Underneath the upper left title should be a hyperlink "Start" Click it
    You can also check  the Power Management tab and unchecked the box that says "Allow the computer to turn off this device to save power."  
    If the issue remains you may wish to contact Microsoft support for further assistance.
    Microsoft Corporate Customer Service.   1 800 642 7676
    Microsoft Contact Us
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • HP Envy 5532 Printer - unable to install a driver with full functionality

    Hi we have purchased a HP Envy 5532 all-in-one and were advised (and as stated on the packaging) that it will print 2 sided automatically.
    So far we have followed the instructions on various sites but we do not appear to have the option in the printer's Preferences  to be able to select 2 sided printing from the drop down list on the layout screen as there is no drop down list in there to select from as illustrated in the screen grab below:
    The options to the left of the screen grab allow me to select a manual 2 sided option where it will prompt us to reload the paper manually but no automatic options?
    Our operating system is: Windows 8.1 Pro 64-bit and we have been on www.hp.com and downloaded the appropriate driverfor this environment.
    The driver currently installed is: HP Envy 5530 Series Class Driver - the driver would not install off the disk which came with the printer so this was the recommended official download via the HP website
    We have run the HP Print and Scan Doctor supplied on HP Connected it found issues with the driver "the Driver does not have full functions installed" and attempted to download a fully featured driver - this has failed again and again.... to load
    We then downloaded and ran the "HP Installation failure unknown device" application and followed this to the letter 5 times!!! all this did was to stop the printer working at all. It ran until the install stage and then it keeps coming up unable to install on network - the printer is there on our network with an IP address???
    We disabled all Firewalls and ran the install without any start up items running via misconfig options as directed but still it fails at the same point on installation.
    We had to uninstall all HP drivers and let the PC "add a printer" via the Control Panel options which it has and we are able to print again but we do not have full functionality as we still can not print automatic 2 sided copies and when we run HP Print and Scan Doctor it still recognises that we do not have full functionality!!!
    Any help would be appreciated
    Thanks  Steve

    @Steve_Reeder, welcome to the Community
    I read through your post about how you do not have access to the full software and options for your Envy 5532, as the Full Feature driver is not installing successfully on your Windows 8.1 system. I saw that you have tried various troubleshooting steps, such as a Clean Boot (msconfig), the Print and Scan Doctor, etc.
    I will do my best to make some helpful suggestions to you to try out.
    It seems as though you are trying to install on your network, could you possibly try installing the printer as a USB connection, and afterwards converting the USB connection to wireless through the HP software (applies to wireless connection and not ethernet)? If you're installing ethernet, skip this suggestion.
    You could also try installing the printer under a Clean Boot (msconfig) and turn off your firewall, under a new user account with Admin Privileges, to see if that will work.
    Another idea would be to run the System File Checker to see if this scan will pick up any issues:
    Using System File Checker to Restore System Files
    Please let me know your findings thus far, and if you notice any error messages or codes, let me know all of the details.
    I hope to hear from you, enjoy your Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Agere Ethernet Controller (ET-131x) - unable to install the driver

    I need to install the following wired NIC:
    01:00.0 Ethernet controller: Agere Systems|ET-131x PCI-E Ethernet Controller (unknown)
    It seems that the "et131x" kernel module is necessary.
    The web site bellow gives instructions on how to install the driver from sources:
    http://dadams1969.googlepages.com/et131xkernelmodule
    Unfortunatly I am unable to do it.
    I have also tried to install the module compiled by a member at the following address:
    http://www.archlinux.org/~tom/packages/
    The module seems to be installed properly. A new folder is created in /lib/modules/
    However, I am unable to load it.
    # modprobe et131x.ko
    FATAL: Module et131x.ko not found
    #insmod et131x.ko
    insmod: error inserting 'et131x.ko': -1 Invalid module format
    Am I doing something wrong?
    NB:
    The module has been compiled for the 2.6.20 kernel and I am using 2.6.22 (i686)...
    Last edited by sylvain77 (2007-09-26 08:23:48)

    Heh... I had competely forgotten that I had done that, so now I feel morally obliged to help you.
    I just tried a rebuild against 2.6.22 and it failed, but after a little digging around, I found a patch, and now it builds. I can't tell you if it works or not, as I don't have the hardware.
    Get the new package in the same place as before, and let me know how it goes.
    It's worth noting that this code is 6 months old at this stage, and the project doesn't seem to be very active. There's one 4-mail thread about it on lkml.org, with no indication that this will ever be merged to mainline.

  • Can not update Itunes to 7.4... Unable to install Gear Drive???

    I had this problem before, but my daughter just received the new Ipod Classic and itunes, again needs to be updated. Why can no one answer this one question? When trying to update itunes I always get this error message: *"Unable to install the GEAR driver set at this time. The GEARAspiWDM service used by the GEAR driver set is scheduled to be deleted to be deleted during the next system reboot. Please reboot the system and run itunes again."*
    I can reboot the system FOREVER and still get the same response. CAN ANYONE PLEASE GIVE ME SOME FEED BACK!!! Thank You
    <SCRIPT type=text/javascript>_popupControl();</SCRIPT>

    Does this help?
    http://www.gearsoftware.com/support/forum/viewtopic.php?p=3452

  • Windows 8.1 is not starting after installing Bluetooth driver

    I cannot start Windows 8.1 Pro (64Bit) after enabling Virtualization ( because I need HYPER-V ) from BIOS settings.
    It was perfect before installing RaLink Bluetooth Driver update.
    I use "HP ENVY 15 Touchsmart j001tx" laptop.
    Please have a look on this articles also:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/windows-81-is-not-starting-after-enable/5aee0db6-7cdd-46b7-b85f-f048d9cf5d7e
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/bluetooth-driver-for-hp-probook-4740s-crashing/633a2200-ecdf-45bb-b643-075650ea3a16
    Further information:
    HYPER-V and Bluetooth individually works fine. But laptop is not starting up when both are installed. Please help me.
    Sushovan Mukherjee

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Can't Install bluetooth driver on Windows 8 64 bit. MSI GE620DX

    I cant install the provided  Windows 8 64bit Bluetooth driver from the MSI download page. Tried many times, Reboot Uninstall current driver, install again, and ETC.
    I had sent a question to MSI already, it's been a month already since I sent a ticket and I still got no update or fix from MSI Support.
    Does MSI support usually take this long to provide fix or reply for this kind of issues? I felt disregarded cause I haven't got any reply aside from the advise to download the driver on the MSI download page; which is the driver that is not working. I've already sent them a message that It won't work. -_-
    The Bluetooth function of my Laptop is useless as of now.
    Does anyone here encountered a Driver problem similar to mine?

    I finally got this fixed. I uninstalled all Bluetooth related drivers and programs using Ccleaner and clean all its traces in the registry as well, rebooted and tried installing the provided Bluetooth driver provided on the MSI Download Page and succeeded.

  • Problem while installing bluetooth driver

    I am using windows 7 ultimate OS in my dell Inspiron N5110. There is no Bluetooth icon in my control panel and because of that I cannot connect my Bluetooth devices to my laptop. While I was downloading Bluetooth driver from an external source a windows
    popped out which says that Bluetooth adapter cannot be detected in your system. Is there any problem with my Bluetooth adapter hardware? Can anyone suggest me a way to get rid of this problem?  Thanking you in advance. 

    try uninstalling all the drivers you just installed for your printer and plug in your printer and run software update from the  on the upper left of the screen. if there are no drivers available for that, you might have to wait as suggested by your local apple tech.
    EDIT:
    try this
    http://support.apple.com/kb/DL905

  • Unable to install twain driver for Epson scanner -- Leopard

    I finally got the printer driver working for my Epson CX6600.
    Downloaded the correct driver from the Epson website and all is fine.
    But now my scanner won't work.
    The CX6600 is an all-in-one.
    The Twain Scanner Driver was paired up in the same download.
    However, after downloading the installer file I was unable to install it.
    The cursor just spins and spins -- and I then get a repeated warning window asking if I want to open this software downloaded from the Internet.
    I have to do a Force Quit to get out of the installer app.
    Ideas?
    Thanks,
    Danty

    where you able to resolve this problem? I also have this problem. Can scan manually.

  • Unable to install new driver for Quadro 4000

    Hello
    downloaded the new version 304.00.05f05 for quadro 4000. unable to install the new driver for NVIDIA Quadro 4000.
    By clicking on the DMG I get a message "high-os-title high-os-message superimposed on the installer window
    old NVIDIA driver already installed ; CUDA updated automatically to version 5.0.45
    OS : Mountain lion
    anywhere button activated  in security window
    Please help

    Try downloading the update again. Perhaps the one you have got corrupted during the download process.
    You can install updates in the Safe Mode and it should eliminate the possibility of other software interfering with the update process.
    Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem.
    Safe Mode
    Safe Mode - About

  • Tecra S1 : After update Win XP SP3, Installing Bluetooth driver hangs !

    Hello,
    after updating the Win XP Professional from SP2 up to SP3
    the Bluetooth doesn't work anymore.
    I tried to install the Bluetooth Drivers again.
    During installation it hangs,
    if have to abort the installation.
    Nothing helps to get the installation correct finished.
    Does someone had solved the problem ?
    Thanks.
    Patrick

    Same here on my S4. When installing the driver it asks me to plug in my device...
    The stack itself seems to be working, tough. Bluetooth ca now be activated in Config Free.
    Also there are two unknown devices in my device manager. The location for both is Intel(R) 82801GBM (ICH7-M) LPC Interface Controller - 27B9.
    And both show under Details->Function CM_DEVCAP_SILENTINSTALL

  • Lenovo G460E can't install bluetooth driver

    Hey guys, I'm having problem installing the bluetooth driver of Lenovo G460E, it says that I need to turn on the adapter of bluetooth, I tried pressing Fn + F5, nothing happened! What should I install to turn on the bluetooth adapter? I can't seem to find to application for it, can you also give me link for it? Thank you very much in advance!
    By the way, my operating system is Windows 7 Ultimate 32-bit.

    Install first ReadComm Software,then turn the bluetooth radio on,it will automatically install.
    here are the links http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/G460eG560e/APP/IN12STW94WW5... for ReadyComm,http://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/G460eG560e/IN3BTH52WW5.exe for Bluetooth.

Maybe you are looking for