Elitebook 8460p isn´t able to show power consumtati​on when plugged in

Hello,
my Elitebook 8460p isn´t able to show power consumtation when plugged in. I tried to reinstall different versions from the HP Power Assistant, but that doesn´t solved the issue.
Note:
- Windows 7 Fully Patched
- Latest BIOS
- Latest HP driver

The taskbar by the way doesn´t show any "power consumpation"

Similar Messages

  • HT1481 ipod shuffle 2nd generation, does not show up in window when plugged into itunes. Also, does not charge(no light comes on).

    I have a ipod shuffle (2nd generation) that won't light up when plugged in to the power adapter. I have only used it a few times since I purchased it years ago. Also, when I plug it into my computer with itunes running, it isn't recognized at all, as in nothing happens when I plug the usb cable with ipod attached and on to it. Any help would be much appreciated.

    but there is another unspecified error.
    What is that error?
    Are you sure she has a Shuffle? You mentioned a Sad Face.. that would indicate that the iPod has a display, which a Shuffle does not.
    B-rock

  • HT3964 macbook pro will not start on battery power works fine when plugged in

    My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.

    check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column.  How many cycles? What does it say about the condition? etc.

  • HT201263 my iphone 4 wont come on although it does show the apple signal when plugged in. i need to restore it but dont know how

    recently my iphone 4 shut down and wont come back on. when i plug it in to outlet or computer it shows the apple signal but still wont turn on. i need to restore to factory settings

    Hello, Taylorlocke. 
    Thank you for visiting Apple Support Communities.
    Here are a couple helpful troubleshooting articles that I would recommend going through.  They will walk you through troubleshooting this issue. 
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Jason H.

  • Kindle does not show up as device when plugged in USB

    I was trying to transfer some files to my Kindle using the USB port. I have a Kindle 2, and a Rocketfish Micro USB cord. The Kindle does charge up so it is drawing power through the cord. But the Kindle does not show up as a device attached to my MacBook. My external HD (Firewire) and iPods (USB) all work perfectly through this USB hub.
    I did call Apple (using my 30 day warranty for installing Snow Leopard) and the tech support person did not even know what a Kindle was.
    Amazon says it's an Apple problem.
    Apple doesn't seem to have any clue.
    I've seen from various threads that USB devices do seem to have intermittent problems. Is the Kindle one such device?

    Some devices do not work properly through a hub. Plug the kindle directly into your Mac and see if it works. Just because some devices work through a hub, doesn't mean all devices work through a hub. Apple does not support third party devices or third party hubs.

  • WD My passport not showing up on desktop when plug in

    I've just brought a 500GB WD portable hard drive but when i plug it into my mac it isn't coming up on the desktop. The hard drive itself is making a noise when its plugged in, but nothing else is happening. How can i get my mac to recognise this drive?

    Assume you are trying to connect via USB? Powerbooks don't put out enough juice on USB to power many devices. So, some won't even power up, and some may power up and still not be recognized. There are a few solutions:
    1) Get a power supply for the external hard drive
    2) Get a powered USB hub that your hard drive would plug into
    3) Get a special USB cable that has two plugs to use both Powerbook USB ports
    4) Connect via Firewire. With a Powerbook, this is preferred, because you can boot from a Firewire device, which you cannot do with a USB-only device.

  • My iphone wont show up in itunes when plugged into my laptop, help anyone?

    when i plug my pihone into my laptop ( windows running on windows 8) it wont show up or connect into itunes, i can do the exaxt same thing with my ipod and it will connect and sync with my itunes library so i am confused to what the problem is. can anyonw help?

    Hello Katie_5SOS
    Check out the article below to go through some troubleshooting steps to get your iPhone to show back up in iTunes. It could be related to the Apple Mobile Device driver or could be a third party software conflict.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • New Battery only shows 97% full even when plugged in

    Any ideas as to why? My original battery would always show it was 100% once it hit full charge plugged in.
    Any help is appreciated.
    Thanks,
    Aaron

    You probably need to calibrate it a few times to teach it where 100% is.
    http://docs.info.apple.com/article.html?artnum=86284
    Joe

  • Dropped my iPhone in snow and now it will only show the apple logo when plugged in

    I dropped my iPhone4s in the snow the other day, consequently it got wet. I could see the condensation in the camea and flash and the screen turned black however the phone still worked as when my friend called me it vibrated but I couldn't answer it because of the screen. The flash also was constantly on so it seemed like everything was working inside the phone but just not the screen.
    As soon as I got home I left the phone in rice for 2 days.
    I got the phone out and plugged it in to charge. The apple logo showed up and the phone vibrated but en the apple logo disappeared and the screen turned black again. I unplugged the phone and plugged it in again and the same thing happened with the logo again but no vibration.
    If I take the phone out of the plug it will just stay as a black screen.
    Any suggestions as to what is ring with it or what I could do to fix this?

    You've most likely cooked it. Make an appointment at the genius bar. Take the phone and your credit card with you. An out of warranty replacement will cost you $199.

  • MacBook won't power on, even when plugged in

    Not sure what's going on. My white MB is my secondary computer, I've only had it for a few months. I brought it on a trip a couple of weeks ago and it was fine. It's been packed up in its case since I've been home, so I'm sure the battery is probably dead. I took it out today, and plugged it in, but it won't power up. Even if the battery is dead, shouldn't it turn on when it's plugged in?
    I get nothing...no sound, no flicker, no nothing. Help? I have an Apple store close by, so that's not a problem...just want to make sure I'm not missing something dumb before I head over there.
    -SB

    The Apple store called this morning and confirmed it was the logic board that went bad, and that it was fixed and ready to be picked up. I stopped by to get it after work and I'm back up and running again...and I couldn't be more pleased with how Apple handled the whole process. Less than 24 hours from the time I dropped it off to the time it was fixed and ready for pickup.
    Kudos to the San Tan Village Apple Store in Gilbert, AZ!!
    -SB
    Message was edited by: SisterBlue

  • TS3274 My iPad will not turn on or power up even when plugged in

    My iPad was down to 20 percent battery.  I turned it off and plugged it in for the night.  In the morning it will not even power on even plugged in.  Only had it 2 weeks

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • G4 won't startup but ticking sound in power supply area when plugged in

    My G4 had been fine since the HD went bad years ago and was replaced.
    Didn't use it much for a while, then would start normally but shut down with no warning after a few minutes. Then after seconds, then power btn would light up but shut down immediately.
    Replaced battery and pushed PMU button. (button doesn't seem to react in any way so don't know if pushed properly or not)
    Then nothing happens at all when I push the startup button. But I noticed a quiet ticking sound coming from the area of the power supply, and remembered I had heard that noise lately not knowing where it came from (when it's plugged in but not on). It has always been plugged to a APC BACKUPS 500.
    Put back old battery and no difference.
    I hope the power supply is not dead, probably cost more than a G4 to replace it.
    Any clues? Thanks

    OK, I found the info I was looking for on the forum, which was:
    "Disconnect all external devices/cables/cords except the power cord.
    Touch a metal slot cover on the back of the Mac as a static electricity discharge precaution.
    Remove the battery.
    Reset the PMU, depressing the button for a five-count.
    Depress the front power button, again for a five count.
    Wait 30 minutes or so to insure the capacitors on the logic board are fully discharged.
    Reinsert the battery.
    Reconnect the power cord, mouse, keyboard, and monitor and attempt startup."
    After doing this, the power button did light up! BUT went out immediately
    Same thing several tries.
    Also when I plugged it in after the 30 min without battery, there was the ticking sound for a few seconds, but then stopped. Hmm. ?

  • My iPhone 4 is not showing up on computer when plugged in, yet it shows up on iTunes. I have a windows computer.

    .

    Which Mac OS X do you have installed?
    With iTunes open, from the menu bar click iTunes > About iTunes
    The latest version is 10.5.2

  • Iphone 4 doesnt show up on computer when plugged in

    i bought my iphone off of kijiji and transfered all of my info like visas and bell account ect.. but when i open up itunes and plug my phone into pc nothing pops up at all and with my old iphone itd automatically pop up in itunes.. ive pretty near tried everything ive seen on net someone see this please help

    See if any of these articles help.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.

  • Elitebook 8460p error message

    HP EliteBook 8460p
    I got message right after power on.
    Failed to get ME Kernel Host Interface version....
    Removed HDD and reset BIOS doesn't help. Pass memory and HDD test in BIOS. Unable load from any external device.
    I can't find any information about that problem. Please help.
    Regards,
    BBot

    I found a reference to a reference to a possible problem here and I applied this patch but it didn't change a thing. 
    The log, shown below, appears to have found my system all right "Found WIM. No need to do anything."
    Still F11 not working 
    Mounting HP_RECOVERY at C:\Users\JEANLU~1\AppData\Local\Temp\f11patchmount
    Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\​\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\​\")->AddMountPoint()
    Method execution successful.
    Out Parameters:
    instance of __PARAMETERS
    ReturnValue = 0;
    Getting architecture we are running under...
    Running under 64-bit
    Found WIM. No need to do anything.
    Executing (\\KALGOORLIE\ROOT\CIMV2:Win32_Volume.DeviceID="\\​\\?\\Volume{df649fe3-ffc6-11e0-9cb8-402cf413e21d}\​\")->Dismount()
    Method execution successful.
    Out Parameters:
    instance of __PARAMETERS
    ReturnValue = 4;
    Finished running the patch.

Maybe you are looking for

  • How to sychronize app with a new library without loosing data?

    Hi, I had to re-install my SO and now I have to synchronize my ipod touch with a new itunes library, itunes tells me that if I do this i'll loose al apps and data that i have on my ipod, how can I transfer app and data from the ipod to my pc and sync

  • It won't charge...

    I plug it in to the charger and the batter icon shows it as charging but when I unplug the charger the battery is red and then it turns itself off claiming there's no battery even though it's been charging all day... and when I plug it into the compu

  • ISync & .Mac ruined my life

    I have been syncing my bluuetooth phone to my mac for some time now just fine. Now that I have a .Mac account to sync my contacts and bookmarks across three macs, it's friggin ****. I sync to .mac and then to the phone, and now countless entries are

  • Anchors within dynamic lists

    Hello~ I currently have a static web page with a list of documents on it that is navigable by alphabetical anchors, as well as a "back to top" anchor after each letter section. I am working on putting all of the content into a database so that it can

  • What is the consequence of disable fast-start checkpointing?

    What is the consequence of disable fast-start checkpointing ( or set fast_start_mttr_target=0 ) ?