Elitebook 8460P with Windows 8

Hello,
Today I have migrated my HP Elitebook 8460P with Windows 7 installed to Windows 8 Enterprise. All hardware works fine but only my USB3.0 are not recognized I have also installed the option Hyper V in Windows 8 Enterprise.
Can some one help me so I can use my USB3.0 ports because for the moment I have only 2 USB ports
Thanks for helping
Jan

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage, as this is the consumer support forums.
You can access the enterprise support forums at the following link.
http://goo.gl/LsnuK
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

Elitebook 8460P - Shutdown and USB problem

We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.

RNGhatesMe wrote:
We're having a very odd problem. When the system (HP Elitebook 8460P running Windows 7 x64 Enterprise) is online over wireless, everything works fine. HOWEVER, 2 very odd behaviors manifest if the system is not connected to a wireless internet connection:
- It will not shutdown. The system will hang at "shutting down . . ." message. If the power is turned off (5 sec press on power button), it will boot up the next time saying that it was not shut down properly.
- one of the USB 3 ports will not work (this is incredibly odd!). Not sure how the 2 could be connected, but apparently they are!
The system is well-maintained, and shows no signs of viruses or malware. All drivers and software are up to date, including BIOS. If the system is connected any working wireless connections, neither problem occurs.
Hello!
I suggest you open your command prompt and run the "sfc /scannow" command to ensure that your system files are intact. Make sure to post the result.
Have a great day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Power Management Issues with Windows 8.1 RTM on HP Elitebook 8560w

Installed Windows 8.1 RTM on my HP Elitebook 8560w yesterday and am having the same problem as with Windows 8.1 Preview before - power management is not working correctly. The screen will dim real shortly and come right back after the set amount of minutes, but it does not turn off. Standby never occurs. I have the power managent plan set to "balanced", but neither plugged in or on battery do the set timers work. The only thing that works is manually pressing the power button to go into standby.
Anybody else see this problem or is there a bug fix for this?

Windows 8.1 is not an official release, and still a beta program and not officially supported. Also, your EliteBook is a Business model. Your future issues would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Problems with Elitebook 8460p graphics driver

Hello
I´m having problems with Elitebook 8460p display driver. The last version (15.28.20.64.3347) posted on 16 jun 2014 have some issues on the laptop. When the notebook is running on batteries the screen suffers from flickering and corrupted graphics, as you can see in this video:
https://www.youtube.com/watch?v=gQ1w0aOaF7A
(you can see the flickering between 0:20-0:22)
I contacted with local hp support and send me an IT guy, who changed my mainboard and CPU, but nothing worked. I tried to contact with intel for support (the issue is present with intel non-oem drivers) but they send me to OEM. I would like to have an actual driver that works with the system (3347 is a year old driver), is this possible?
This issue isn´t present at all in linux drivers, plus mainboard change i totally discard a hardware problem.
I can provide feedback for any solution provided.
Thanks!

Hello @falken2k5
To get your issue more exposure I would suggest posting it in the commercial forums since the Elitebook 8460p is a commercial product. You can do this here Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 8460p Base Model Notebook PC.
I hope this helps!
Thank you for posting on the HP Forums.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Fastest way to install windows 8 with windows 7 or vice versa

Hi
How much time did it take for you install windows 8 on your pc as a dual boot? It took me 5m56s!!!
The only difference between you all and me would be the method via which we installed. This method does requires legal windows 8 copy or the one which you re installing. This process is far better than installing by booting from cd.
In this method, we use the install.wim of windows installation to install windows. I found this because i was actually preparing for a project on wim images on school. Basically, windows installer also uses the install.wim file to install windows. It was first introduced in windows vista i believe and from then, the trend continued. WIM stands for Windows Imaging Format. . These images are also used in one key recovery for the factory backup. These images can be managed by dism comand line and imagex tool
I know that i have been dragging it for a bit long, so lets start then. It can be done by two programs, gimagex or imagex. The differnce between the two is that imagex works on command line only but the gimagex is like an imagex with user interface-much easier. So, we would use gimagex here, download from below
http://www.autoitscript.com/site/autoit-tools/gimagex/
So lets move into the steps
Insert the windows 8/windows 7 dvd or mount the respective iso.
Clear a partition for the new os
Run gimagex, go to the info tab. Select the image file there. Navigate to the setup directory and enter the soruces folder. Then select the install.wim file and then pressget info. It would display the os version it has. See the index number after the title of the version name.
Select the source first. The source is the install.wim image. Navigate to the setup directory and enter the soruces folder. Then select the install.wim file.
Now select the destination. Select the drive which you cleaned for the installation of the os. Then choose the index number of the os version you want to install.
Click apply and then it would be a matter of 5-6 minutes.
After the process is finished, dont reboot. Now, you have to install Easy Bcd since the windows 8 installation wont be registered in the bot configuration data. Download from here. Just download the non-commercial free copy of the software. Instal it and then run. Go to add new entry, select windows 8/7 and name it as windows 8 and lastly select the drive leter in the drive it was installed and press add entry.
Now it is the time to reboot. You would see windows 8 in the boot menu. Boot into it.
Setup windows 8 and download the drivers from here before hand.
With the help of this, you will be able to easily dual boot windows 8 and windows 7 without messing up anything. This is by far the easiest and fasted method to install windows i have witnessed till now
If you want to clean( only kep one os) install, you will have to use imagex in windows pe mode or in cmd in windows 8 install disk.
After these proesses, i cannot assure if one key reocvery would work, so make backup before hand.
And if you have any questions, feel free to ask
Hope this helps
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Btw, is it possible this becomed a sticky thread?
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Will U310 be compatible with Windows 8?

Hi.
I'm planning to buy a U310 ultrabook. And I'm also planning to upgrade it to Windows 8 later.
Will it be compatible with Windows 8?

Windowd 8 would be compatible with U310. Just hope that till you buy all the drivers would get released. I may not be correct about this but rest is upto you.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Screen Brightness not changing with Windows Mobility Centre

Hi
I have an ideapad U310 which is one month old. Since about a week, I am not able to change my screen brightness with the Windows Mobility Centre or the Power Options. However, the Function keys are working fine. Please suggest me how to correct this problem. I am running Windows 7 Home premium which came installed on the Laptop.
Thank you

Have you installed energy management in you pc. If you have, it migt not work as energy management takes up the job.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

I have an HP EliteBook 2760p using Windows 7 - 64-bit Professional
My original problem is that I couldn't create the Repair Disc
I found out that the problem was with a file that was on the recovery partition
I backed up the recovery partition from the same make and model computer
I reformatted the partition and recovered the backup to the reformatted partition
It didn't work
How do I create the recovery partition I have the 2 disks that came with the tablet PC

If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
NOTE: back up your files as Factory Restore wipes ALL data.

Elitebook 8460p isn´t able to show power consumtation when plugged in

Hello,
my Elitebook 8460p isn´t able to show power consumtation when plugged in. I tried to reinstall different versions from the HP Power Assistant, but that doesn´t solved the issue.
Note:
- Windows 7 Fully Patched
- Latest BIOS
- Latest HP driver

The taskbar by the way doesn´t show any "power consumpation"

Elitebook 8460p Trackpad

I have an Elitebook 8460p, and I'm having an issue with the trackpad. I'm having issue using the scrolling feature on the trackpad. This trackpad uses gestures for scrolling (Scroll with two fingers). Most times when I try to scroll, the mouse pad is very inaccurate and will perform the wrong gesture. The most common incorrect gesture is zooming. I try to scroll down a webpage, and it zooms way in or out instead. It's very frustrating, and basically unusable.
All of my previous HP laptops had the scrolling area on the right side of the trackpad, and that always worked great. Is it possible to enable that on this laptop?
I've tried re-installing the Synaptics driver with no luck. I even had to format the computer for an unrelated problem, and the issue persists.
Any help you can provide would be much appreciated.

Aiyoooo, sorry HP. Love you dear You are DUDE.
The below link showed me how to use the horizontal and vertical scrolling. Now i am trying my level best not to use mouse and customizing myself to use only the trackpad.
<3 Love,
Jebastin
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSe...

Elitebook 8460p

Hi all,
I have a damaged screen on my Elitebook 8460p and I have it connected to an external display. The display works fine when windows loads but I am unable to get into the bios as it does not show anything until the Windows loading screen.
Is there a setting I am missing?
Thanks
Arthur

Dear Customer,
Welcome to the HP Consumer Support Forum!!
Please boot the unit to BIOS. To boot to BIOS, restart the unit and keep tapping F10. Once you are in BIOS, go to system configuration > Built in Device options > Enable Integrated Camera by check mark in the box > save the changes and exit.
Now go to device manager and check if the webcam is listed under Imaging devices.
If the webcam is listed in device manager, please try and install the following driver:
HP Webcam Software (International):
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5056901&swItemId=ob_97559_1&swEnvOid=4059
Hope this helps, for any further queries reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
GR1
Although I am an HP employee, I am speaking for myself and not for HP

EliteBook 8460p Headphone balance issues

Hello,
I got that new Elitebook 8460p and I know that both speakers are on the left side of the beast... but when I plug my headphones (which I have test on an other device) I only got sound from the left and nothing from the right. I looked in the sound settings and the balance is equal on 1 and 2. Is it a "built-in" problem, is there something to resolve it or is there something wrong with my laptop.
Thanks

Hello Elivebook_user,
YourEliteBook is a Business model. Your issue would be best answered on the HP Enterprise Business Community Forum
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Elitebook 8460p only boots from two specific USB sticks

My Elitebook 8460p boots perfectly normally from HDD but will ONLY boot from two specific USB sticks - 1. A Windows Recovery USB and 2. A Parted Magic USB stick which is a commercial partition recovery/imaging utility - it will NOT boot from ANY OTHER USB stick at all.It'll boot from a CD/DVD. What I would like to know is why it won't boot from any other bootable USB stick at all other than those two?

That is because the other usb sticks you have tried have not been made properly bootable. Check the partition type on the sticks that work. Do they have a uefi partition or are they just MBR partitions that are active? Use Windows own disk management snapin to investigate the usb sticks.

HP Elitebook 8460p screen flicker & blinks issue and upgrade help.

Greetings,
I have a problem with my Elitebook 8460p. My old servant service me since 3 years. We have an good relation with highes and lows. Changed hdd, upgraded rams, monthly cleaning and etc.
Anyway; I have a problem with flickers and blinkings. When i push the start (On/Off) the computer, some strange black lines appear and never gone. The funny part is that the black lines, blinkings/flickers gone crazy when i touch the touchpad. But if i didnt touch the touchpad the black lines comes less.
Things i did;
Checked electrical parts - No electrical leakage (Checked with ohmmeter)
I tried to run with on AC and on Battery - Nothing changed.
I was disabled ambient light sensor - Nothing changed.
I was disabled touchpad - Nothing changed.
Formatted, update the BIOS to latest version, w7 up to date, No unknown device, performed stress test CPU & GPU, performed reassemble & assemble Nothing changed.
My suspicion;
The CPU Because this computer VGA card integrated with CPU. Changing CPU, maybe fixing all problems.
I want upgrade my computer to i7 and my choice : Intel Core i7 - 2670QM.
My reservation / questions;
Is Intel Core i7 - 2670QM CPU compatible with my QM67 Chipset? If compatible; what i need to do? (BIOS update, or different BIOS version etc.)
I have some information about this situation and my notebook.
The Video
Hp Elitebook 8460p series using Hannstar MV6 and my motherboard is same. Non VGA. I'm worry about the my solution. If i'm wrong; i spend my money for nothing.
I'm waiting ur answers.
Thank you.
This question was solved.
View Solution.

Really? No answer. Thanx HP.
I found the answer.

Ideapad z570 so many problems with windows 8

i cant make lenovo enegy mangment to work
oneKey theater is not working either
the thermal mangment also not working
plz help

Not all softwares and drivers have been released for windows 8 till now. Please wait for them to be published.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Elitebook 8460P with Windows 8

Similar Messages

Maybe you are looking for