Elitebook 8530 sparekey problem after password recovery

Hi,
I'm a bit panicking - but will try to make this lucid.
I very much hope you guys can help..
It's the continuation of a problem I asked yesterday somewhere else.
http://forums.techguy.org/windows-vista/1133738-check-after-password-recovery.html
Basic system information:
EliteBook 8530; runs on Vista Business. More details about system in above thread
But for a short run-down:
- Yesterday my user-password was not accepted.
- Still had admin-access via fingerprints
- Ran Malbytes anti-malware and AVG anti-virus - neither found much of anything.
- Made new admin account, used that to reset my password.
- Posted the above-mentioned topic whether someone could check for malicious processes.
- Yesterday evening shut down the computer as normal
- This morning it mentioned that recently a password had been reset [with some location I didn't know. Had my name in it twice, so perhaps root-password or something?
- Only option was to click 'OK' and enter HP Sparekey.
- Currently I have the following message: Some users have not enrolled for HP SpareKey recovery. Do you want to enroll now? Answer-options: Yes; No; Do not show again.
I don't know the implications or effects of any of them - so haven't done anything yet.
Note: I don't think any of the accounts have HP SpareKey enrolled. I have never seen about it previously.
However, I got my laptop via an university-program, so the operating systems etc. had been preinstalled.
It might be possible they installed ShareKey for the initial account - but I think I would've heard of that.
So please someone help me - I really don't know what to do..
This question was solved.
View Solution.

Hey guys,
I don't want to hurry you or anything - but I could really need some advice here
Or should I be in a difference forum part; like http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-ZBook/bd-p/bsc-274 or http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/bd-p/bsc-271#.VBnV4lJIg1g
because it's an issue with an EliteBook?
Or don't you guys really know this particular problem either - and therefore can't advice?..

Similar Messages

6509 - 720 Supervisor Module Failure after Password Recovery

Hi,
I attempted to perform a password recovery on a 6509 with dual WS-SUP720-3B modules running 12.2(33)SXI2A.
After changing the configuration register to 0x2142 and booting, I am getting a major error on the supervisor modules. I've changed the configuration register back to 0x2102 and am still getting the same error on both supervisor modules. I've also tried it with one module removed and one module installed.
I have about 30 seconds in where I can run commands before I get booted to rommon.
Any thoughts?
See below for the console output:
System Bootstrap, Version 8.5(3)
Copyright (c) 1994-2008 by cisco Systems, Inc.
Cat6k-Sup720/SP processor with 524288 Kbytes of main memory
Autoboot executing command: "boot bootdisk:"
Initializing ATA monitor library...
string is bootdisk:s72033-ipservicesk9-mz.122-33.SXI2a.bin
Loading image, please wait ...
Initializing ATA monitor library...
Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################################################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x4224F120
*Apr 19 05:03:02.747: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
*Apr 19 05:03:01.515: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch
Firmware compiled 19-May-09 12:08 by apyu Build [25600]
*Apr 19 05:03:02.747: %OIR-SP-6-CONSOLE: Changing console ownership to route processor
System Bootstrap, Version 12.2(17r)SX5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 524288 Kbytes of main memory
Download Start
Download Completed! Booting the image.
Self decompressing the image : ############################################################################################################################################################################################################################################################################################################################ [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x43A51E70
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C6509-E (R7000) processor (revision 1.5) with 458720K/65536K bytes of memory.
Processor board ID SMC133600GT
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
194 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: no
Press RETURN to get started!
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c)
Router> 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WAen
Router#TCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Router#
Router#Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
Router#
Router#
Router#
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
Router#
Router#
Router#
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
Router#
Router#
Router#
Router#show diagnostic result
% Incomplete command.
Router#show diagnostic result ?
module Module Keyword
Router#show diagnostic result ,modu modjle ule 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More-- U U
5) TestLoopback:
Port 1 2
6) TestNewIndexLearn ---------------> .
7) TestDontConditionalLearn --------> .
8) TestBadBpduTrap -----------------> .
9) TestMatchCapture ----------------> .
10) TestProtocolMatchChannel --------> .
11) TestFibDevices ------------------> F
12) TestIPv4FibShortcut -------------> F
13) TestL3Capture2 ------------------> F
14) TestIPv6FibShortcut -------------> F
15) TestMPLSFibShortcut -------------> F
16) TestNATFibShortcut --------------> F
17) TestAclPermit -------------------> F
18) TestAclDeny ---------------------> U
--More-- 19) TestQoSTcam ---------------------> U
20) TestL3VlanMet -------------------> U
21) TestIngressSpan -----------------> U
22) TestEgressSpan ------------------> U
23) TestNetflowInlineRewrite:
Port 1 2
U U
24) TestFabricSnakeForward ----------> U
25) TestFabricSnakeBackward ---------> U
26) TestTrafficStress ---------------> U
27) TestFibTcamSSRAM ----------------> U
28) TestAsicMemory ------------------> U
29) TestAclQosTcam ------------------> U
30) TestNetflowTcam -----------------> U
31) ScheduleSwitchover --------------> U
32) TestFirmwareDiagStatus ----------> U
33) TestAsicSync --------------------> U
34) TestUnusedPortLoopback:
--More--
Router#[Ashow diagnostic result module 5
Current bootup diagnostic level: minimal
Module 5: Supervisor Engine 720 (Active) SerialNo : SAL1338YTZ0
Overall Diagnostic Result for Module 5 : UNTESTED
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) TestScratchRegister -------------> U
2) TestSPRPInbandPing --------------> U
3) TestTransceiverIntegrity:
Port 1 2
U U
4) TestActiveToStandbyLoopback:
Port 1 2
--More--
Router#
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: M
%Software-forced reload
04:56:30 UTC Sun Apr 19 2015: Breakpoint exception, CPU signal 23, PC = 0x42735338
Possible software fault. Upon reccurence, please collect
crashinfo, "show tech" and contact Cisco Technical Support.
-Traceback= 42735338 42732E8C 423A6220 423A624C 421C1388 4223F614 4223F670 40962164 40963034 40962F54 40963D28 423259D0 42319604 42319820 42727FEC
$0 : 00000000, AT : 43FE0000, v0 : 45870000, v1 : 00000200
a0 : 46DC99C0, a1 : 44E05758, a2 : 00000000, a3 : 00000040
t0 : 00000010, t1 : 3400F101, t2 : 3400F100, t3 : FFFF00FF
t4 : 42728608, t5 : 00002F04, t6 : 80000000, t7 : 00000000
s0 : 00000000, s1 : 43EE0000, s2 : 50449158, s3 : 0000001F
s4 : 50449158, s5 : 470B3AB4, s6 : 00000000, s7 : 08A5DFC8
t8 : 08028FEC, t9 : 00000000, k0 : 00000000, k1 : 00000000
gp : 43FDDE8C, sp : 5000DBB0, s8 : 00000000, ra : 42732E8C
EPC : 42735338, ErrorEPC : 870FDDF0, SREG : 3400F103
MDLO : 00000000, MDHI : 00000000, BadVaddr : 00000000
DATA_START : 0x43A51E70
Cause 00000824 (Code 0x9): Breakpoint exception
Writing crashinfo to bootflash:crashinfo_20150419-045630
=== Flushing messages (04:56:30 UTC Sun Apr 19 2015) ===
Buffered messages:
*Apr 19 04:55:51.335: RP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:52.107: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:56:00.531: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Apr 19 05:03:03.111: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Apr 19 04:55:46.739: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Apr 19 04:55:46.747: SP: SP: Currently running ROMMON from S (Gold) region
*Apr 19 04:55:47.483: %SCHED-SP-7-WATCH: Attempt to set uninitialized watched boolean (address 0). -Process= "<interrupt level>", ipl= 1, pid= 3
-Traceback= 408E0820 40D74FEC 40D4B31C 40D4A1A8 40D46448 40F604B8 4173CCDC
*Apr 19 04:55:59.607: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPSERVICESK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
*Apr 19 04:56:00.591: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Apr 19 04:56:00.695: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Apr 19 04:56:00.943: %OIR-SP-6-INSPS: Power supply inserted in slot 2
*Apr 19 04:56:08.099: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 5.
*Apr 19 04:56:08.195: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 5 became active.
*Apr 19 04:56:09.567: %DIAG-SP-6-RUN_MINIMUM: Module 5: Running Minimal Diagnostics...
*Apr 19 04:56:29.637: %DIAG-SP-3-MAJOR: Module 5: Online Diagnostics detected a Major Error. Please use 'show diagnostic result <target>' to see test results.
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestFibDevices failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv4FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestL3Capture2 failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestIPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
Queued messages:
*Apr 19 04:56:33.583: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.
IPv6FibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestMPLSFibShortcut failed
*Apr 19 04:56:29.641: %CONST_DIAG-SP-3-BOOTUP_TEST_FAIL: Module 5: TestNATFibShortcut failed
*Apr 19 04:56:29.971: %HA_EM-6-LOG: Mandatory.go_bootup.tcl: GOLD EEM TCL policy for boot up diagnostic
*Apr 19 04:56:30.575: %CPU_MONITOR-3-PEER_EXCEPTION: CPU_MONITOR peer has failed due to exception , reset by [5/0]
*** System received a Software forced crash ***
signal= 0x17, code= 0x24, context= 0x45876f54
PC = 0x42728664, SP = 0x43ed9cd8, RA = 0x413ad2f4
Cause Reg = 0x00003820, Status Reg = 0x34008002
rommon 1 >

What kind of line card was being inserted in slot 6? Have you tried other slots? The crash file in the RP says it was reset by SP, so the important crashinfo file would be in the sup-bootflash: Try an see if you find any "dir sup-bootflash:"
Aug 5 17:46:11: %C6K_PLATFORM-2-PEER_RESET: RP is being reset by the SP
%Software-forced reload
To answer your question:
A Is there any different procedure to install line modules in supervisor slots?
>>No there are no special configuration you need to do when inserting a line card in slots that normally would be for supervisor.
B Switch is having previously removed linecard (i.e, fastethernet module)in running configuration. Will it create any system crash?
>>No, it will not cause the switch to crash, when you see the configuration of a line card even after it was removed is quite normal, it's cold module provisionsing, you would not want to keep putting in a configuration for any line card after just resetaing them do you?

I do not get an email after password recovery

I do not get an email after password recovery

10/26/13 I have tried several times to no avail today. Oddly, the password was saved under my main email addree to get into the forum but I can not get downloads to download.
Is there an issue with Apple server responding to sending password recovery to my main email address today?

Operating system problem after system recovery

i have PURCHASED HP-ENVY-M6-1125DX (IN-USA) IT CAME WITH - WINDOWS8 OS .(BOUGHT IN BEST BYE)
RECENTLY I UPGRADED TO WINDOWS8.1 PRO PREVIEW. SINCE THIS VERSION OF OS WAS ASKING THE ACTIVATION KEY,
I HAVE RECOVERED MY LAPTOP TO FACTORY SETTINGS BY USING RECOVERY PARTITION PRESENT IN MY HARDDISK.
BUT NOW THE OS IS WINDOES 8 BUILD9200, AND THIS OS IS ALSO ASKING FOR ACTIVATION KEY.
PLEASE HELP US IN SOLVING THIS PROBLEM.

Hello Mahantesh-uppin,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having issues reactivating your Windows 8 Product Key after a factory recovery. I would recommend that you review and follow the instructions in the HP Support document: Windows 8 Product Activation. This document will walk you through reactivating your Windows 8.
I hope I have answered your question to your satisfaction. Thank you for posting this issue on the HP Forums. Have a great weekend!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Problem in password recovery

I am suffering from the problem of the restoration of the password is the first time you log in, and I've been showing me the error message that the password is incorrect and the truth password is incorrect I've restore password from email, but I figured the problem which is the appearance of a line contact our customer support department for information that message came to me to change the password and I work all the steps and the last step which is to confirm the password change appeared this contact our customer support department. I do not know what the solution Skype for information I have is very important! Erga immediate solution of technical support for information I do not know that I understand English and translated speech

Hi:
Please understand that Firefox is NOT available for iOS (iPhone, iPad, iPod Touch), Windows Phone, Windows RT, Bada, Symbian, Blackberry OS, webOS or other operating systems for mobile:
Please see [https://support.mozilla.org/en-US/kb/will-firefox-work-my-mobile-device#w_other-operating-systems Will Firefox Work on My Mobile Device] for more details.
Thank you.

Account has forgotten history after password recovery

Hi all,
I mistyped my password a couple of times on my iPhone today and had to go through iTunes to recover/reset it.
Then I went to update my iPhone app "Saisuke" But I was told only existing purchasers could get the Update !
I have had my account for several months and have bought a number of apps for my iPhone.
I cannot find anywhere to report a problem as my account through iTunes shows nu purchase history. I even have all of my receipt emails where I purchased them
What can I do ?
Thanks !
Howard

You can email Customer Services using the form at this link: iTMS Customer Service

HP Deskjet 3510 Wireless Network Problems after Password Reset

The password on our wireless router was recently changed, and I have not been able to get my printer working since - this has actually happened before and I WISH I could remember how I fixed it last time, but this time it seems no matter what I try (deleting the printer and any related software, reboot, reinstalling software and hardware), nothing seems to help. I managed to print a wireless network test page and there it tells me that the "WPA security passphrase configured on your HP printer does not match your wireless router setting". Now that much I already know, and the solution makes sense as well, to re-enter the wireless network WPA security passphrase, except I am drawing a blank as to how exactly I am supposed to do that. Oh and I should also mention that unlike last time now the blue wireless control light and the white e-print light on the printer control panel are blinking constantly as soon as the printer is turned on and started up. I would really appreciate any help anyone could give me. Thank you!

Hi,
Please use the following instructions to (re)setup it up:
HP Deskjet 3510 e-All-in-One Printer support
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Worrisome problem with Password Recovery

I'm an Italian user and use skype a few days ago but always entering my password on my account: marketing.strategy the system tells me my password is incorrect. I try and ripvoro but wrong. I do the procedure for the recovery thereof and it says that email I post there. Then dopoun few times that I post tells me that two Sorry but you are limited to security Reasons to the number of temporary codes Received Each Day. You have Reached That limit have today, Please try again in 24 hours. But how do I get the Code if the email does not exist. I note that the password I had changed a few days before and I was duly sent on the address code now says he is not among its records. Please help me I've saved hundreds Contact account and I have not done BackUp well as hundreds of Skype clients know that account. Thanks anyway!

Hi, Mrktngstrtgy, and welcome to the Community,
First of all, thank you for patiently awaiting a reply, and apologies for the delay; we in the Community are volunteers.
You need to contact Skype Customer Service for assistance; they will ask for verification the account is indeed yours. contact customer service Community members are not authorized to address account-related issues.
Best regards,
elainem77
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Apple ID problem after password change?

I cant download anything from the store with my apple ID after they asked me to change the password, cuz i dont have a credit card!!!
They keep telling me that i have to submit the billing options before i have to continue !, i was fine before they asked me to change my password.
What should i do?

Hello,
To create a new Apple ID for use on iTunes Store, App Store, iBookstore, and Mac App Store without a credit card, follow the steps below.
http://support.apple.com/kb/HT2534
Hope this will help.

PDF conversion problem after password change

I am in a loop: having changed password, Adobe insists on new subscription to PDF conversion before converting a document, but will not accept my submission because I already have a subscription with 4 months still to run before renewal. How do I sort this idiot out?

Which subscription service did you purchase? Adobe PDF Pack or ExportPDF?
Could you make sure that you are signed in before converting documents?
Go to the home screen of Adobe Reader for iOS.
Tap My Account in the lower left corner.
Tap the blue Sign In button.
Sign in with your Adobe ID and new password.
(Tap/click the image above to enlarge)
Additionally, please take a look at this FAQ page for account information.
Adobe ID | Sign in | Change email, password, or account information
Please let us know if you need further assistance.

Email problem after password change

Hello, hope someone is able to help.
Two days ago I changed my email password, since then I haven't been able to log back in at all. It doesn't recogonise my new or old password and also doesn't recognise any personal information so not even able to get in that way. I've emailed (with another account) bt but haven't heard back yet. I'm a little desperate now as I already had a few emails to answer.
Please help, thank you.
Lee

leekel80 wrote:
Hello, hope someone is able to help.
Two days ago I changed my email password, since then I haven't been able to log back in at all. It doesn't recogonise my new or old password and also doesn't recognise any personal information so not even able to get in that way. I've emailed (with another account) bt but haven't heard back yet. I'm a little desperate now as I already had a few emails to answer.
Please help, thank you.
Lee
Hi Lee.
Sorry to hear this. Have you tried the reset password area (see my shortcuts option 3a) ? It seems like you have by the info you've supplied.
May I ask how you changed the password ? Was it via a similar screen display to my option 3 , usually reached from the accounts & billing page in the portal.
Are you logging in via webmail, or using an email client program such as Outlook, Windows Mail or Thunderbird ?
It does seem like somehow the act of changing the password has somehow corrupted the entry. Is there any slight chance you may have entered the password and somehow pressed the wrong key twice including the confirmation entry ?, or indeed another slight mistake that you can possibly remember ? Sorry for any inference, but it can happen unfortunately.
If all these things fail, then certainly the helpdesk is your best route as the other replies have said.
Good luck.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Password Recovery SRW Switch problem - SRW224G4P

Hi,
i have a problem with an SRW224G4P.
I have lost my admin password. And yes i have read the "Linksys SRW series Switch Password Recovery Procedure".
My problem is that the message "Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom." don't appear.
So what can i do?
Thanks for your help.

After many reboots, many hours and several terminal software, i get never a message like "Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom."
Below an Log-File with all Bytes coming from the switch after reboot till then Logon-Screen appears.
So what can i do????? Any idea ??
Thanks for your help.
Image Loader 1.0.1
Loading Diagnostic Image File : SRW224G4P_SRW248G4P_boot.bix
Diagnostic 1.0.1
User Mode
--- Performing Power-On Self Tests (POST) ---
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
------------------ DONE ---------------------
Loading Runtime Image File : SRW224G4P_SRW248G4P_image.bix
Runtime 1.0.2
Pass
root init done
Set Transition mode ...
[get stackingMac done ret_val] = 1
Assigned Unit ID:[1]
stacking DB: unit = 0, module type = 0
Finish Set Transition mode ...
Enter Transition mode ...
Finish Transition mode ...
Enter Master mode ...
Load certificate files : Starting
Load certificate files : Finished
Finish Master mode ...
Performing startup provision ...
CLI enter main (PROVISION)
Press [P] to print out the detail provision message
!<stackingDB>00</stackingDB>
!<stackingMac>01_00-1c-10-ee-ac-fc_00</stackingMac>
phymap 00-1c-10-ee-ac-fc
hostname SRW224G4P_01
SNTP server 192.168.1.1 0.0.0.0 0.0.0.0
SNTP client
clock timezone UTC hours 1 minute 0 after-UTC
^
Invalid input detected at '^' marker.
SNMP-server location [cleaned]
SNMP-server contact [cleaned]
clock timezone-predefined GMT+0100-Amsterdam,Berlin,Bern,Rome,Stockholm,Vienna
clock summer-time predefined EUROPE
^
Invalid input detected at '^' marker.
power mainpower maximum allocation 180 unit 1
snmp-server community public ro
snmp-server community private rw
username admin access-level 15
username admin password 7 1fe56bbd74eacf7[cleaned]
enable password level 15 7 1b3231655cebb7[cleaned]
VLAN database
VLAN 1 name DefaultVlan media ethernet state active
spanning-tree MST configuration
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
![REDUCED] interface ethernet 1/24
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/25
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/26
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/27
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface ethernet 1/28
switchport mode trunk
switchport allowed vlan add 1 untagged
switchport native vlan 1
interface VLAN 1
IP address 192.168.1.111 255.255.255.0
no ip name-server auto
no IP HTTP server
ip dhcp hostname SRW224G4P_01
line console
silent-time 0
line VTY
end
Notify provision complete
CLI provision has been completed
Provision Complete ...
Finish Provision Complete ...
[get stackingMac done ret_val] = 1
XFER: End of config sync.
[0m[0m[24;0H
Please press <Enter> to start Menu session!

Computer fails to boot up after password change. After new password keyed in, computer also asked for old password. But even when old password supplied, computer just freezes and fails to boot up. What is causing the problem and how can one solve it?

Changed password on MacBook Pro recently. But after password change. Computer ask for old password, thereafter. Even when correctly supplying the old password. Computer system does not boot up and just freezes. What is causing the problem and how can one resolve the issue?

OS X 10.7 Lion, 10.8 Mountain Lion, 10.9 Mavericks and 10.10 Yosemite
Reset Password
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse pointer to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Enter a new password.
Reenter the new password for the user.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

HP G56 System Recovery Problem after removing disk 4 black screen

hi everyone
this is my first time, im helping my nextdoor neighbours laptop hp g56,
the hard drive has been fried and i have intalled my old playstation 3 40 gb hard drive into it.
after the recovery system finished and told me to remove disk 4 it restarts and now have a black screen, does this mean its still installing because i turned it off and then on and now say no bootbale device.
windows 7
40 gb hard drive (ps3 40gb)

pepe999 wrote:
selinacartwrigh wrote:
my system comes on and then stop before it opens the key board and say disk boot failure insert system disk how could find a disk I cant even get in
The message means that your internal hard has been damaged. This message always comes up when the file system is corrupted. I suggest to remove it, connect the hard drive into a different computer as an external drive (use usb caddy), perform a backup if possible and the format the hard drive and restore the factory settings. I'm afraid that you have to reformat the hard drive, a checkdisk scan won't help..
The error message means that the Boot Sector is corrupt or has been damaged. It does not mean that the hard disk is damaged.
This is a fixable issue. There are a few command line tools that can be used.
You will need to make an appropriate version (32-bit / 64-bit) of the Windows 7 repair disc from a working Windows 7 installation. You will need either a USB or CD to create your rapair CD/USB. Follow the instructions on this video to create the repair installation of your choice..You will will be using the manual boot sector repair that is described in this video to repair your Windows 7 Boot sector. Use the Windows 7 repair disc or repair USB thumb drive that you created earlier to accomplish the repair.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

A friend bought second hand macbook air mid 2011 with crossed circle on the display, we tried recovery from partition and same thing happened, after internet recovery it stays the same except now it asks for password for boot option, what happened?

A friend bought second hand macbook air mid 2011 with crossed circle on the display and give to me to try to recover the system, I tried recovery from partition and same thing occured, after internet recovery it stays the same-crossed circle after reboot, then we tried to boot from USB with mac os 10.8 on it, it installs something,like it has being finishing installation, rebootes, and now it asks for password for boot option.We have no idea what that password could be.What happened!!!

I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2

Elitebook 8530 sparekey problem after password recovery

Similar Messages

Maybe you are looking for