Elitebook 8560w keyboard failure after BIOS update

Hi,
I have recently updated to F.22, however, I suffer from major problems: the keyboard and touchpad not longer works as expected. I suffer huge delays between input and reaction of the computer. I have to hold keys for several seconds for actions to take place. However, USB connected devices (mouse/keyboard) works just fine. I am not able to roll back my older BIOS because of notice -failed BIOS signature.
O/S: Windows 7 32 bit.
Could you, please, help me? It's a shame that first post here is asking for help
Thanks,
Jonas

Ok. Update - after BIOS hard reset, the computer turns on again. Anybody has any ideas how to roll back older BIOS (officially it doesn't allow to roll back to older BIOS version than F.20 as per HP
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=be&prodTypeId=32...
"NOTE: After this BIOS update has been installed, previous BIOS versions cannot be installed."
Is it possible to override it somehow? Could there be any other solutions?

Similar Messages

Satellite P100 - Boot Failure after BIOS update

Hi,
I wanted to update BIOS on my Satellite P100 - (PSPADE) with latest version downloaded from Toshiba site.
Quitted all apps.
Run zip file Error Message file %path\phlahnt.sys not found.
Keyboard no longer worked Unable to shutdown even using power button.
To shutdown unplugged laptop and removed battery.
No longer boots No Message, No Beep, Nothing.
I have tried with restore CD with Power up holding F12 key but nothing.
I have also tried to power up with and without AC plugged and with and without battery but still nothing.
Plug, Battery, Leds on when power up Power and speakers leds also on
Any help? Any suggestion, any idea?
Many thanks
Nour

Hi
Hmmm what to say. Sounds not good and in my opinion it looks like you have updated the notebook with a wrong BIOS or something went wrong during the BIOS update procedure
Are you 110% sure you have used the right BIOS??
It seems you will be not able to solve this issue yourself without any additional help from notebook technician.
In most cases the BIOS must be flashed again on special way
For me its clear You have to contact the ASP to get rid of this issue
Good luck and regards

MSI MPOWER MAX Z87 - RAID failure after BIOS update (settings reset)

I use the integrated intel RAID controller to create a 2 disk RAID-0 6TB (2x3TB), but everytime I update the BIOS, there is a RAID failure.
It does not matter if I use Live Update or the Update BIOS+ME option of the BIOS menu. All settings are lost, and after the boot the RAID controller is deactivated due to that. I go to BIOS right after the auto-reboot and re-enter my settings (RAID instead of AHCI), but the intel controller only sees 1 disk as a RAID member. Recovery option is not active when I enter the controller options (control+I). I always need to delete and recreate the RAID, which of course loses all data.
Very frustrating!
Am I doing the update wrong? I know I did it once and settings were not reset, my RAID was kept intact, but I believe it was only 1 time of 4 or 5 updates I did to my MPOWER MAX.

Hi, thanks for trying to help!
- I use Windows 8.1.
- My vga does not support UEFI so I use... legacy mode? (I'm not that familiar with BIOS->UEFI yet, sorry.)
- According to Intel RST, the RAID HDDs are on ports 2 and 3.
- This time the update was from 1.80 to 1.90.
1.70 to 1.80 also resulted in the same problem, but I used LiveUpdate.
For previous updates, I don't remember but I sometimes I used LiveUpdate, sometimes the BIOS feature.
I'm pretty sure that only once the RAID was kept intact, and I don't remember the versions or method I used, but I believe I used the BIOS method (don't know if needed BIOS+ME or not), not LiveUpdate.

Boot Failure after BIOS update

I have just built a new machine around an MSI K8N Neo4-FI Nforce4 Ultra based motherboard.
I am using a Promise Supertrak SX6000 RAID controller for my various disks.
The system built fine, but when I allowed Liveupdate to update the BIOS to the latest version (1.D I think) it will no longer boot off the RAID controller even though everything in the BIOS says that it should.
Has anyone got any suggestions?
If anyone has one of these boards with an older BIOS version that they can send me an image of, I'd be extremely grateful.
Thanks,
David.

Quote from: dhmilton on 12-June-06, 03:41:42
Given the symptom, and the list of BIOSes on that page, any idea which one might be worth trying?
I can't see anything on any of the change descriptions which would point at problems booting off additional controller.
I have no idea what BIOS version was on the board when I got it...
David.
Well it appears that MSI updated the SiL firmware at 1.C, that's likely when they screwed up the PnP assignment of reserved memory mapping. I'd try 1.B as a first stab but that's only a WAG. You might also try to find a program which shows the reserved memory mapping and see if there's no way to change the Promise assignment - that might also help tell MSI what they've buggered up. Of course the fact that your mbrd does not actually have a SiL controller makes things all the more aggravating - a symptom of attempts to make a "unified" BIOS to cover all variants of a common feature set.

After bios update side nomberpad is not workinh keys from 0-9

after bios update side nomberpad is not workinh keys from 0-9

Hello jay04,
Welcome to the HP Forums!
I understand the number keys do not work on your keyboard. I will do my best to assist you. First, I require the following information:
1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your product number
2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
3. Does this occur on certain programs, or all programs?
4. Have you installed any new software or drivers on this computer, before the issue appeared?
Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
Thanks!
Mario
I worked on behalf of HP.

I can't activate windows 8.1 pre-installed on my Toshiba E45-B4200 after BIOS Update

I bought Toshiba laptop Model E45-B4200, at first time I could activate windows 8.1 like a charm.
Few months later Windows 8.1 has crashed, so I did clean install of pre-installed windows, no problem so far. Toshiba Application installer app has downloaded BIOS update, so I ran it.
I tried to activate windows after BIOS update, but it didn`t work. No error message, but Change PC settings window just got minimized every time that I tried to click on Activate Windows option. I thought that I did some mistake, so I repeated windows reinstallation, and same problem occurred again.
Now I can`t update Windows, Office 2013, and so on.
I`ve tried SLUI 4 command to force activation by phone, but it didn`t work as well.
I read on MS blogs that windows 8.1 stores product key on MSDM table, windows should be activated normally. Now I got no options now, can you help me?

It shouldn't need to be activated it. Everything should be automatic. Because it's asking you, that's already indicative of a problem. You might want to call customer support.
- Peter

Problem in booting after bios update

Originally, it was windows home basic was installed in my laptop. But recently I had installed Windows professional. After installation I have downloaded all drivers which are compatible for my laptop model. After BIOS update installation my pc is not booting up at all. Only power button, WiFi and capslock is lighting. Capslock is continuosly blicking. Even FAN speed gets lowered. I have tried hard reset as well as windows+B comand during startup still condition is same. Please reply me....

see help 8....
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Internal camera failure after software updates...first skype couldn't......

Hello!
I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
Please help!
Thanks
O

First, reset the SMC:
http://support.apple.com/kb/HT3964
If that doesn't help, then take it to an Apple Store for examination.

Hi . plz help me. after bios update. i could work till I shutdown

After bios update I could work till I shutdown my laptop g510 . Now when I press power button. White light near camera shows but again it goes off. Plzzzzz help me
I also pressed one recovery. Then pressed f2 and f9 f12 nothing working.

take it to point of purchase with proof of purchase if you can't find a Nokia care point near you
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

Satellite Pro L300: BSOD after BIOS update

Hi
after update the Bios of Satellite Pro L300, the windows not start!
Its show the blue dead screen!
What can i do?

Hi
Are you able to access the BIOS settings?
Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
But if the SATA drivers are not included the SATA mode should be set to compatible.
Please check this!
Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

After bios update, my window media player got hang and headphone clarity is not proper

HP Pavilion g6 after bios update, my window media player got hang and headphone clarity is not proper

Hello mathewstays,
Which model of g6 do you have? Which operating system? I'll be able to better assist when I know this information.
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Elitebook 8560w keyboard failure after BIOS update

Similar Messages

Maybe you are looking for