Elitebook works on battery and charges it - but does not start with it (only starting on AC)

Hey,
my 8460P only starts up when connected to AC power. Even with a fully charged battery it does not boot, i also have tested this with a replacement battery - but batteries are working on another Probook.
Strange: If I unplug the AC directly after powering ON, the 8460p continues running on battery.
What exactly happens:
I have fully charged battery and no AC connected. I press the power button, the CPU fan makes noise (full throttle), LEDs are glowing: Wireless, Power and HDD. The DVD drive is initializing... and then after 3 seconds device shuts down - BUT the power LED keeps glowing.
If I then press the Power button once again, nothing happens.
But when I connect the AC back, the SCROLL LED glows for about 3-4 seconds and then turns off.
What I did already: The well-known hard reset (disconnect everything, hitting power 30seconds): no success.
Latest BIOS is installed. Factory defaults loaded... nothing. Played around with different BIOS settings (everything which sounds for "power" or "AC" tried...) nothing.
This is not OS related - so updating any drivers or software does not make sense. 
Further remarks:
Also from the sleep modes (hibernate or S3) it will not wake up from battery... again only when connected to AC!
Any solution/idea? please support. 
Thanks a lot!
regards,
G

@gambrinus 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • When I click on a .docx document Firefox thinks it is binary and saves but does not open with MS Word - but it knows .doc is MS Word and opens it automatically

    When I click on a .docx document Firefox thinks it is binary and saves it but does not open with MS Word. But it knows .doc is MS Word and opens it automatically (this is the behavior I would like with .docx docs.) In preferences -- applications - it is just says "content type" is "microsoft word document" but doesn't give a way to choose .docx specifically. Is there another way to do this?
    Iam running Mac OS X 10.6.4 and Firefox 3.6.8 with MS Word Mac 2008

    Hi ,
    According to your description, my understanding is that you could not edit documents with Office client application in SharePoint 2010.
    Let’s do a troubleshooting about this issue:
    1. Make sure that you have installed Office application on your machine.
    2. Which explorer did you use for your SharePoint. Please test it with IE 10 32-bit, compare the result.
    3. Please try to reset IE, compare the result.
    4. Add your SharePoint site into Trusted site on your IE options.
    5. Make sure all add-ons related to SharePoint are enable, special for SharePoint OpenDocument Class and SharePointOpenXMLDocuments.
    6. Since you used OWA for your SharePoint site, please try to disable OWA, then open documents with client application, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    can somebody please help me fix this issue, i have been sitting at my computer all last night and this morning trying to figure it out. It could be the hardrive or anything really i just need to get it working. Alot of important things that need to be done using this computer and i am freaking out.
    My computer suddenly decides not to work and turns on but does not go past the grey apple screen with the loading wheel.. it will not go to my desktop. What should i do?

    Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    Or if you are running 10.7 Lion, boot from the recovery partition (Command +R on boot) and use Disk Utility to repair your OS 10.7 partition.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • Hello ... I brought my iphone 4 of panama and comes with the sim small, I live in Colombia. and the court but does not recognize it yet ... q in the company will give me a sim tigo that size to see if it works. I was told it comes with open bands ...

    hello ... I brought my iphone 4 of panama and comes with the sim small, I live in Colombia. and the court but does not recognize it yet ... q in the company will give me a sim tigo that size to see if it works. I was told it comes with open bands ...

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    I have a Serial Number which worked fine on my MacBook Pro but does not work on my desktop PC (Win 7).  What is the problem?

    You haven't identified the version so I can't tell if offering you contact options for Adobe Support will be of use to you.  But they will likely be your only hope of getting resolution unless you just happen to be using the wrong number as the serial number.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

    New Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.
    Tried restarting, checked the lock, gyroscope.

    Hey Oprion,
    Thanks for the question and congrats on your new iPhone 5c. The orientation of your iPhone will depend on the application you are using. For example, most of the built in applications only support the three main orientations (Horizontal, Vertical, Horizontal), whereas the Voice Memo’s application will operate “upside down” for easier access to the microphone.
    Change the screen orientation - iPhone
    http://help.apple.com/iphone/7/#/iph3badf94ec
    Thanks,
    Matt M.

  • HT201412 my phone restore but does not starts it shows only apple logo please help me

    HI
    My i phone restore but does not start it shows only apple logo & charging it was not connect to i tune please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • Firefox has detected the server is redirecting the request for this address in a way that will never complete. This is happening in my email program with comcast but does not happen with IE e

    Question
    firefox has detected the server is redirecting the request for this address in a way that will never complete. This is happening in my email program with comcast but does not happen with IE e edit

    Thanks to cor-el for the suggestion given in the link. Sadly I have to report:
    1) It is not a bookmark problem and it makes no difference whether I put
    www.adobe.com or 192.150.18.117 in the address bar.
    2) Cookies are allowed and there are no exceptions set
    3) All cookies have been deleted
    4) network.http.sendRefererHeader is already set to 2
    That deals with the items in the linked document.
    Additional information:
    5) I can get into the adobe site from a clean "in memory" installation of PuppyLinux using Seamonkey using the same router and dhcp setup.
    6) un-installing all Mozilla products - rebooting and re-installing makes no difference even when I remove the mozilla folder from docs&settings.
    so as I said in previous post (as annonymous) not a lot makes sense.
    Bear in mind that I have no problem running tracert in a command window
    Tracing route to www.adobe.com [192.150.18.117] over a maximum of 30 hops:
    1 11 ms 10 ms 9 ms 10.0.0.1
    2 13 ms 12 ms 11 ms glo-2-dsl.as9105.net [212.74.111.191]
    3 13 ms 12 ms 11 ms ge1-2-27.glo0.as9105.net [212.74.106.106]
    4 14 ms 12 ms 13 ms pos0-0.bri1.as9105.net [212.74.108.162]
    5 17 ms 16 ms 17 ms ge0-0-0.he-lon0.as9105.net [212.74.109.14]
    6 17 ms 17 ms 16 ms 10.72.11.75
    7 16 ms 17 ms 17 ms xe-0-3-0-10.lon20.ip4.tinet.net [213.200.77.177]
    8 91 ms 92 ms 99 ms xe-5-1-0.was12.ip4.tinet.net [89.149.184.34]
    9 92 ms 92 ms 93 ms xe-0.equinix.asbnva01.us.bb.gin.ntt.net [206.223.115.12]
    10 162 ms 170 ms 162 ms as-3.r20.snjsca04.us.bb.gin.ntt.net [129.250.2.167]
    11 166 ms 166 ms 165 ms ae-1.r07.snjsca04.us.bb.gin.ntt.net [129.250.5.53]
    12 162 ms 163 ms 161 ms xe-0-2-0-3.r07.snjsca04.us.ce.gin.ntt.net [128.241.219.86]
    13 166 ms 163 ms 161 ms 192.150.18.11
    14 166 ms 166 ms 165 ms www.adobe.com [192.150.18.117]
    Trace complete.
    and I can ping the site.
    so where now ?

  • Why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one

    why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one

    Good question... Lol, I've noticed that iPads do too... I just use a bent paperclip works like a charm.

  • I am getting my third battery and charger! What's the deal with poor quality?

    My macbook is a late 2009 model.  It's always been running great, but I have some key issues that are making me question ever buying a mac again... For starters, I am purchasing my third battery and charger since owning this computer.  I am not very happy with the quality of these devices...  The battery is buldged out, and looks like it's ready to explode any day! The power supply is frayed, and exposing bare wires!  What is the deal with such poor quality products? I always thought Apple was top notch in high quality, but lately, I've been proven wrong...
    Power cord:
    Battery:
    Seems to me that these issues REALLY need to be addressed by Apple.  The reviews on the power supplies are ridiculous!  Numorous complaints, yet Apple has YET to do anything about it!  So my question is, what is Apple going to do about these issues?  These need to be addressed, and fixed, ASAP!  I owned a Dell laptop for 6 years, and never had an issue with the batteries I had, OR the power supply, and it cost me half the price of this macbook.

    That would be awesome, if the nearest service area wasn't 4 hours away.... It would cost me just as much in gas to drive down there as it would just to buy a cheap replacement off of ebay...

  • Having a problem sending email, I have tried all the fixes, but no luck, actually it works at times and most times it does not. What more can I try.

    Issues send email from my macbook Pro, it is a web based email, and I can send it by logging into the webmail site. The odd part is that sometimes it just works and most times it does not. I go through and make some random changes and and then go back and change it back and it wold work for that email, and then a few minutes later I try to send another and does not work, try doing the same and this time it does not work, getting a little frustrated, what else can I do, except chage back to a windows based laptop?

    If you're having trouble sending, but not receiving, mail, it's likely due to your outgoing (SMPT) server settings.
    Which webmail service are you using? Some provide some good guidelines on setting up your account, some not so good.
    Clinton

  • Wireless All-in One receives scan and ink level but does not print

    My wireless printer was working fine, now it can scan and send scan to my computer, my computer receives ink levels in the utility. Now it will not print from Word or other programs that I was able to print. When I restart the computer with a document  in the printer queue, when it gets to my desktop screen, it prints. But still will not print from Word unless I do the restart again. I have restarted the printer(which works with other computers in the house) and even deleted and reloaded the HP program. My computer receives but does not print. I even tried direct usb connection 

    Hi raavindra,
    Welcome to the HP Forums.
    I see that you are having some issues when attempting to do a scan or a copy.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I have a ipod u2 the screen displays an icon for the current conetar but does not start

    I have a ipod u2 the screen displays an icon for the current conetar but does not start

    Shockwave and Flash are not the same. Try installing a Flash plug-in. Here's the latest: Adobe Flash Player 11.2.202.183

  • When I connect my iphone 5 to charge, repeated again and again the charge sound, but does not turn! HELP!!

    help with iphone, you may not start and repeat the sound over and over again that the screen is broken?

    Hello obrunaga,
    Thank you for providing the details of the issue you are experiencing with your iPhone.
    I recommend following steps 2-6 below for an issue like the one you described:
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on),reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    You can find the full article here:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If you get to step 5, I recommend backing up your iPhone before performing the restore:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/HT1766
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Icloud works great on ipad (2) and iphone 5, but does not sync using icloud panel on PC

    I have a iPad 2 and iPhone 5, which sync perfectly with iCloud.  Recently, my iCloud on my PC quit working and I've tried re-installing, etc, but nothing seems to work.  If I enter a new contact or meeting, it will not sync with my other devices.  Help?

    If photostream is not working you can
    Use Explorer to open the Photo Stream Folder.
    The default location normally in C:\Users\Juz\Pictures\Photo Stream\My Photo Stream
    I’ve changed mine to F:\Photo\Photo Stream Download
    Right click the folder, and click Propeties
    You can see the Read-Only has been checked.
    So, you just need to Un-Check the Read Only, and click OK.
    Your photos from iPhone / iPad will transfer to your PC automatically again.

Maybe you are looking for

  • How to resolve JMSExceptions:045032 when creating a JMS Topic

    I am using Weblogic 12c (12.1.1.0).  I have created a new managed server. I have created a JMS server targeted to the new managed server. I have created a JMS module targeted to the new managed server. I have created a JMS Subdeployment which targets

  • Helix's synaptics bottom right click box

    Other than the dropping wireless I get randomly when doing a large download from the internet, the only other issue I have with my 1 week old Helix now is that default bottom right corner "right click" box.  The properties of the driver allow you to

  • SOLVED!!!!!!!!!Placing an Image in original login.jsp

    Hi all, I solved the problem of placing an image in original login.jsp Hope this will be usefull for all who will be trying to edit the original longi.jsp: ====>Place your image in the following folder: C:\installations\Oracle_Infra(Your oracle_home)

  • RMAN hot backup cloning problem..need a way out

    I took hot backup from server A using RMAN I prepared server A by running preclone on apps and db tier I copied apps tier and dbTier(tech_st) from server A to server B..Apps and db tier were up and running during the copy.I also copied the RMAN backu

  • What are PROVIDER_URL and INITIAL_CONTEXT_FACTORY for Sun iMQ

    Hi Thank you for reading my post I am trying to use sun MQ from outside the application server from an standalone client . i want to access to some queue and process its message from the standalone client , but where ever i searched i can not find th