Elitepad 900 tablet shows missing serial and product info when booting
Hi,
i recently updated my tablet from windows 8 to windows 8.1 and then updated bios. after this upgrade on boot screen it shows missing aerial number and product info. please note that i have not changed the board or any other hardware. please help me to resolve this.
regards
Raees
Hello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP.
Similar Messages
-
My elitepad 900 tablet shows missing serial and modle # after bios uptae
My tablet started to show the missing serial and product number after i have upgraded the bios to the latest version. now my windows 8.1 is asking to reactivate windows.
i have not changed the board or any other hardware update. what i did is only drivers and bios updates after i upgraded dro windows 8 pro to to windows windows 8.1 pro.
please help to get it resolved.
thanks
RaeesHello Malik-Raees,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Best regards,
I worked on behalf of HP. -
When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?
It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT -
My Imac is showing gray screen with red line when booting and restarts again
My Imac is showing gray screen with red line when booting and restart again, I can load it in windows 7 safe mode with red lines across the display, pls help
The graphic card is damaged. You can't do anything more than taking your computer to an Apple Store or reseller and getting your graphic card replaced.
Sometimes, when the graphic card is damaged, operating systems can't start. That's caused because the drivers that make the graphic card work detect an error, telling the operating system that the graphic card is unusable, so the operating system can't start and it restarts. However, you can start in safe mode because operating systems use a basic driver in this startup mode -
My email only shows the "to" and "from" info but not the content of the email. Please help. Thanks
My email only shows the "to" and "from" info. There is no information at all in the body of my email messages. Please help. Thanks.
Close the mail app and reboot the iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the mail icon. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
How can I overcome error message "missing or invalid personalisation info" when trying to re-install Elements 3. I need to re-install Elements 3,
@ Alternatively purchase an Elements 9 or 10. Holding Elements13 but that needs OS 10.8 (Lion) and much of my data is in Appleworks, which is incompatble
Apologies if I am using this incorrectly. My first time hereHi. Thanks for coming back to me. I am using Mountain Leopard (OSX 10.6.8). Had major problem and have re-formatted my H/D and re-installing software. Must have lost a file in the process. Would upgrade to Lion only I have a lot of vital data in Officeworks, but that is incompatible with Lion.
-
Not showing missed calls and dropping calls
I have had a Thunderbolt for several months now and I have had a problem with missed calls not showing up and voice mail showing up with missed calls, I have talked to tech and reported this and I received a refurbished phone and still have the same problem any know issues with this?
Hi bbarront,
I apologize for the delayed response and its unfortunate you are still missing calls with the replacement device. Can you please advise if you have taken advantage of the newest Software Update? Additionally, are you advising that you don't receive a notification of a missed call and the only way you realize it is when you check your voicemail? I look forward to hearing from you soon.
Thank you for your involvement in our community forums, -
I get a message that says:boot manager missing..and it will not boot up..what can i do?
When I turn it on ,a screen comes up that says Boot MGR missing..What can I do to fix it?
Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
We recently upgraded to Exchange 2013 SP1 with a client user-base of Office 2010 Professional Plus / Outlook 2010 SP3.
All Unread Email favorites folders show both Unread and Read emails, just like the inbox. Removal of the folder and recreating yields the same results, as does creating a custom folder. However, in Outlook 2013 there is no problem.
Is there a patch or hot fix for this issue? Or does anyone know how to fix this issue so that the UNREAD EMAILS SHOW UP IN THE UNREAD FOLDER AND NOT INCLUDE THE READ EMAILS?
Thank you!
Kim Parker-Polito / Newhall LandGo down to Search Folders
- Right click on Search Folders and create New Search Folder leave default "Unread Mail1" and click OK
- Right click on the new “Unread Mail1” folder and choose “Customize this search folder”
- Click on Browse
- Select the checkbox for “Search subfolders”
- Press OK and OK again.
- Right click on old "Unread Mail" Folder and delete. -
Itunes erased all the album and artist info when reloading library!!!
My problem is a big one. I've got 8600+ songs (800+ albums) on my hard drive. These are all from physical CDs; I ripped them in wav, then converted them to mp3. When I did this, I kept both the wav AND mp3 files in each respective album folder; about 400G of wav and 80G of mp3.
OK, so a couple weeks ago I got hit with a virus. It messed up my XP OS to the point where I needed to do a reformat and reinstall. All of my music files are on an external hard drive, so no big deal there. I finish the reinstall, re-download itunes, and tell it where to find my music, and to import it into the library.
This is where things go horribly wrong. Itunes imports all the mp3 files in as separate folders/albums, just like before, with all the track and artist info intact. However, for some reason, it took all the wav files and dumped them into one giant Unknown Artist/Unknown Album folder. In doing so, it appears to have stripped the artist AND album info from every single one of the 8600+ tracks! I don't know why it did this, as the wav files in the itunes folder all had the exact same track info as the mp3s.
My question now is: is there any way I can get this info BACK, any program that can look at the individual tracks and figure out what artist and album they go with? Or is there something within itunes that can do it that I haven't found yet? There's no way I can go through and do this track by track; I can't even begin to calculate how long that'd take. My only OTHER option would be to re-rip all the CDs, but again, that took months the first time and I don't want to do it again. However, these files are pretty much useless as they are, in a giant pile that seems only to be organized by the songs' respective track numbers.
I am screaming HELP in capital letters here. Even if I could find a program or solution that would find MOST of the tracks' info, I'd be happy. I'd also be interested in knowing why itunes did this in the first place, for future reference.
And just to head off one solution I expect to be offered, no, I did not have the files backed up anywhere else; reimporting an un-reorganized version of the library isn't an option. I had just finished ripping them and hadn't picked up a second hard drive yet. I know, first thing I should have done.
In any event, any help would be appreciated. Please feel free to email me. Thanks.I just remembered some older posts talking about some software from musicbrainz.org.
It might be able to make some sense out of all those WAV files, if you decide to spend the time on it. Honestly I'd prefer to rip my CDs than go through something like that, because I'm a control freak and would not trust the program to really find the right info....but that's just me. It might be easy to set up and a snap to use, for all I know.
http://forums.musicbrainz.org/viewtopic.php?id=1730 -
Not able to open a PDF file in Creative Cloud Illustrator. It shows missing links and so forth
I'm working on CS5 and saving my AI files as PDF. This is all for print, I have created the outlines, and flattened transparency between an image I had placed in on the PDF. My CreativeCLoud AI is not able to open the PDF. It shows that it is missing links. How do I fix this?
Provide the files linked to.
-
Requirement to update bios serial and product ID
Hi,
I have just recently had to source a new system board for my sister in laws laptop computer as she fried one and it was cheaper than a new box, this has fixed the initial issue however because it is a new new board the serial number on the board displays as 0000-00000-0000 etc as does the product id.
What i would like to know is if anyone has a copy of the HP Bios editing utility that i can use to rectify this issue without having to waste my time explaining to a script reading helpdesk worker somewhere three times what the issue is, so i can just update these fields...
Alternatively suggestions of a good third party utility for doing so would appreciated, I have looked around the interweb and found nothing as of yet.
Many Thanks for your Help in advance
StoneyI don't know the solution but some users say that they have called HP and they have sent a field technician to rewrite the mobo ID by some kind of utility which is not available to the public or not recommended for non-experienced users..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"* -
Report showing purchasing group and product responsibility
Hi,
Is there a report that will show all purchasing groups and which product categories that they are responsible for?
Or
Is there a report that will give me each product category and which purchasing groups that are responsible for that product category?
Sincerely
Andersnot clear as to what you want...
PP forum would be best for it... Or if you specify your req more clearly as to what input you give and what output you want, may be we can help
Ajay -
Missing parts and production storage location
Can the production storage location in the material master for a component on a BOM be set to blank to pull in all inventory in the plant when calculating missing parts in a production order? I am finding that the blank production storage location is NOT pulling in all inventory in all storage locations; I honestly think that is how it should work but would like to see what others think or have run into. Thank you very much!
Hi Judith,
This can be done by system to carried out Avilability check plant level instead of storage location level. For that plz do the settings as suggested by our member.
Check the "No.Stor.Loc.Insp" in OPJJ for checking group and Checking rule combination and assign the same checking group to material at MRP view.
Donot Assign storage location for components in material Master and BOM item.
Please try anf comeback
regards
pradeep -
Show missing Type and count as 0 using t-sql
Hi All,
I have a table with 3 columns, let say EventSchedule,ScheduleType,Count
EventSchedule ScheduleType Count
Conference Type1 25
Meeting Type1 20
Meeting Type2 22
Appointment Type1 40
Appointment Type2 35
Appointment Type3 55
I want t-sql to show output like this..
EventSchedule ScheduleType Count
Conference Type1 25
Conference Type2 0
Conference Type3 0
Meeting Type1 20
Meeting Type2 22
Meeting Type3 0
Appointment Type1 40
Appointment Type2 35
Appointment Type3 55
Presentation Type1 0
Presentation Type2 0
Presentation Type3 0
Note:
1)The EventSchedule column will always have values - Conference,Meeting,Appointment,Presentation
2)The ScheduleType column will always have values- Type1,Type2,Type3
In the above sample source data ,there was no Type2, Type3 for Conference and there was no Type3 for Meeting and there was no Type1 , Type2 and Type3 fpr Presentation. So whenever if any Type is missing it should populate that missing Type with count
as 0.
Create statement;
Create Table Sample (EventSchedule varchar(20) null,ScheduleType varchar(10) null,Count int null)
Insert statement:
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Conference','Type1',25)
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Meeting' ,'Type1',20)
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Meeting','Type2',22)
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment','Type1',40)
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment' ,'Type2',35)
Insert into sample (EventSchedule,ScheduleType,Count) Values ('Appointment','Type3',55)
Thanks!
sqlHi HoroChan-
This is the solution I found. I created 2 cte's. In first CTE I created the list with 1 to 12 numbering and did left join with the second cte(source data).
WITH myListCTE AS (
SELECT 'Conference' AS EventSchedule ,'Type1' AS ScheduleType, 1 AS Rn
UNION ALL
SELECT 'Conference' AS EventSchedule, 'Type2' AS ScheduleType, 2 AS Rn
UNION ALL
SELECT 'Conference' AS EventSchedule, 'Type3' AS ScheduleType, 3 AS Rn
UNION ALL
SELECT 'Meeting' AS EventSchedule,'Type1' AS ScheduleType, 4 AS Rn
UNION ALL
SELECT 'Meeting' AS EventSchedule,'Type2' AS ScheduleType, 5 AS Rn
UNION ALL
SELECT 'Meeting' AS EventSchedule,'Type3' AS ScheduleType, 6 AS Rn
UNION ALL
SELECT 'Appointment' AS EventSchedule,'Type1' AS ScheduleType, 7 AS Rn
UNION ALL
SELECT 'Appointment' AS EventSchedule ,'Type2' AS ScheduleType, 8 AS Rn
UNION ALL
SELECT 'Appointment' AS EventSchedule,'Type3' AS ScheduleType, 9 AS Rn
UNION ALL
SELECT 'Presentation' AS EventSchedule,'Type1' AS ScheduleType, 10 AS Rn
UNION ALL
SELECT 'Presentation' AS EventSchedule,'Type2' AS ScheduleType, 11 AS Rn
UNION ALL
SELECT 'Presentation' AS EventSchedule,'Type3' AS ScheduleType, 12 AS Rn
, myCTE AS (
SELECT EventSchedule,ScheduleType, Count
, Case WHEN EventSchedule='Conference' AND ScheduleType='Type1' THEN 1
WHEN EventSchedule='Conference' AND ScheduleType='Type2' THEN 2
WHEN EventSchedule='Conference' AND ScheduleType='Type3' THEN 3
WHEN EventSchedule='Meeting' AND ScheduleType='Type1' THEN 4
WHEN EventSchedule='Meeting' AND ScheduleType='Type2' THEN 5
WHEN EventSchedule='Meeting' AND ScheduleType='Type3' THEN 6
WHEN EventSchedule='Appointment' AND ScheduleType='Type1' THEN 7
WHEN EventSchedule='Appointment' AND ScheduleType='Type2' THEN 8
WHEN EventSchedule='Appointment' AND ScheduleType='Type3' THEN 9
WHEN EventSchedule='Presentation' AND ScheduleType='Type1' THEN 10
WHEN EventSchedule='Presentation' AND ScheduleType='Type2' THEN 11
WHEN EventSchedule='Presentation' AND ScheduleType='Type3' THEN 12
END AS NewRn
FROM Sample
SELECT mlc.EventSchedule,mlc.ScheduleType,ISNULL(mc.Count,0) AS Count,mlc.Rn
FROM myListCTE mlc
LEFT JOIN myCTE mc on mc.NewRn=mlc.Rn
ORDER BY mlc.Rn
Thanks!
sql
Maybe you are looking for
-
Hi all, I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive. I am having a variable named filename and archivefilename and two fileconnection
-
i know longer have my blackberry but the new owner is continuing to receive my personal text messages from my contacts list. i do not have any bbm account and there is no data on the phone. only wifi . please help me stop this from happening. i d
-
Sharing/Saving no longer working
Hi there, If I share or save a file all I get is the screen with "Sharing to Acrobat.com..." or "Saving to Acrobat.com..." but it never progresses beyond the screen. The file however is uploaded to acrobat.com? This used to work until the last update
-
Script error 2126 internet explorer 9
Cannot print from internet
-
Enqueue and Dequeue before updating Database table
Hi all, We are updating database tables using INSERT, MODIFY and UPDATE statements. Since many people will be running the application at the same time we need to lock the table before updating database table. So we need to use ENQUEUE and DEQUEUE fun