Elitepad 900 windows 8.1 auto-rotate screen disappear

after installing all drivers from "downloads" page of your support aouto-rotate is disappear. 
screen do not rotate while iam physically rotate device, also "lock auto-rotate" button do nothing and button of locking rotate missing in brightness in right settings panel.
full reset doesnt help, how turn auto rotate  on?

Hello romka18.
I am sorry you are having trouble with the auto-rotate.
To turn on auto-rotate, bring up the charms by swiping from the right hand side and search on "resolution". You may need to select that you are searching within "Settings" and not "Apps".  One of the settings for resolution is "Adjust Screen resolution", please select that and it will take you to a screen that has a checkbox that lets you enable "Allow the screen to auto-rotate".
There is a good 2 minute video of this on YouTube at: http://www.youtube.com/watch?v=OtiuFLyoGoA uploaded there by Jeffrey Lush.
I hope that helps!
I am an HP Employee

Similar Messages

  • Elitepad 900 Windows 8.1 and Kaspersky Endpoint security 10

    hello
    I encounter a problem with the HP tablet elitepad 900 Windows 8.1 ( only) and Kaspersky endpoint security 10 .
    After the test, I realized that when the components of Kaspersky were active , the tablet had problems booting. ( Freeze at HP logo and blue screen)
    If someone in the solution.
    Thank you in advance.

    Hello romka18.
    I am sorry you are having trouble with the auto-rotate.
    To turn on auto-rotate, bring up the charms by swiping from the right hand side and search on "resolution". You may need to select that you are searching within "Settings" and not "Apps".  One of the settings for resolution is "Adjust Screen resolution", please select that and it will take you to a screen that has a checkbox that lets you enable "Allow the screen to auto-rotate".
    There is a good 2 minute video of this on YouTube at: http://www.youtube.com/watch?v=OtiuFLyoGoA uploaded there by Jeffrey Lush.
    I hope that helps!
    I am an HP Employee

  • N95 8gb Auto Rotate Screen

    Hello,
    I just downloaded the newest firmware for the n95 8gb.
    I had the heard that the newest firmware allows for auto rotate screen from portrait to landscape and vice versa.
    Is this true and if so how do I enable this feature?
    Thank you....

    29-Jul-2008 12:02 AM
    cjlim wrote:
    v20.0.016 is the latest version for the N95-2. I think you guys may have the N95-4 which is the US only version of the N95 8gb
    Yes, sure !!
    Check I've said having an RM-421 phone. That's the N95-4 or N95 NAM. The N95-2 is RM-320.
    Should I assume that americans (not only north-americans) don't need to rotate their screens ??? :-)
    Nokia - "Connecting people" making them to support themselves after wasting USD800+ on a inflatable dinghy "Flagship" :-(
    PS: DON'T EDIT MY SIGNATURE PLEASE !!!

  • Hp envy x2 13 j002dx auto rotate not working Windows 10

    since i upgraded to windows 10 the auto rotate will not work. ive reinstalled drivers. ive reset the laptop and re installed windows 10 but it still wont work. i can turn on and off the auto rotate but it doesnt do anything

    Hi shyndm01
    I just fixed the problem on my device. You need to run windows update, there are about 3 updates for Windows 10. Once install just restart and auto rotation will work again.
    Hope this work for you!

  • Cannot Disable Auto-Rotat​e on Twist s230u

    I want to completely disable the screen auto-rotation on my Twist s230u and prevent it from re-enabling at all.  The only modes I use it in are tablet mode or laptop mode, so I have no use for this.  Is there a way to do this?
    The checkbox under the Screen Resolution section of Display Properties doesn't seem to do jack.  The screen still rotates when this is unchecked.  I've also rolled back the driver of the Lenovo PM Device from 1.67 to 1.66 as per this thread.  Can't say I've noticed a difference after this either.
    Any other ideas?  Thanks.

    Dear Redv
    Welcome in lenovo forums
    All what you need to Disable the auto Rotate Screen is to press on the highlighted button as shows below :-
    - There is anotification massage will be dispayed to confirming that the auto rotate disabled
    Let me know
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Rotating screen (camera).

    Good afternoon! The camera of my Xperia Z3 "turned" as if I were in screen rotation mode. However, even when I disable this rotation, the camera continues "turned" and, when I take a picture and visualize it, it is small and positioned only on the screen side. Would PC Companion resolve this issue

    Also, under settings, display, screen rotation, is Auto-rotate screen selected?

  • Portege Z10T and Win7 - cannot get the screen to auto rotate

    Hi
    I have installed windows 7 to a Portege z10t and cannot get the screen to auto rotate when flipped to portrait and landscape, I have had a look at the intel graphics properties and cant find anywhere their to configure this any ideas and have googled it.
    Any ideas?
    Thanks

    Hi
    Are you sure that you have installed all essential Toshiba tools and utilities as well as Win 7 drivers for this Portege Z10T series?
    Toshiba EU driver page provides the essential software like *Tablet Easy Control.*
    This utility is necessary for the auto rotation function of the Tablet PC.
    I would recommend you to check if all software available on Toshiba EU driver page has been installed and run properly on your notebook

  • HP Client Security software preventing the upgrade to Windows 8.1 on my Elitepad 900.

    When I tried to upgrade my Elitepad 900 to Windows 8.1 I get a message that the HP ProtectTools Security Manager must be uninstalled before proceeding. I'm then prompted to uninstall the Device Access Manager for HP ProtectTools and Drive Encryption for HP ProtectTools. I never bothered to initiate any of this software when I got my Elitepad 900 and now I'm not sure if it's safe to remove it and proceed with the Windows 8.1 upgrade? Hopefully someone here can help me out with this.
    Thanks,
    LexHex

    DSORacing wrote:
    I have same problem but in a 15-j040us. I made everything that you offer as solution but it cannot upgrade to Windows 8.1.  I read this post from another user with same graphics adapter that my laptop has and it looks like a solution, but at the same time, looks quite dangerous to make. Here is the post. http://208.74.204.203/t5/Notebook-Operating-Systems-and-Software/Updating-to-WIN-8-1-Fix-to-black-sc... Let me know if yu can help with this issue as soon as possible.
    Thanks!
    This  worked for me after 7 attempts with all kind of solutions on different forums. HP Envy 15 Notebook - Intel HD 4000, Nvidia 740
    Locate the F11 key and start tapping it as soon as you turn on the system.
    Stop tapping once you reach the recovery manager screen.
    Click Troubleshoot .
    On the Troubleshoot screen, click Recovery Manager .
    On the OS selection screen, click Windows 8 . Recovery Manager opens.
    Under I need immediate help , click Minimized Image Recovery .
    When Recovery Manager prompts you to back up your files, select a backup option.
    If you have already backed up personal files or you do not want to back up personal files, select Recover without backing up your files , then click Next . Continue to the next step.
    Follow the on screen options and complete the system recovery.
    After the system recovery is complete, click Finish to restart the computer. Complete the setup screens and wait until the computer finishes the setup
    -Then, make sure to install all updates via Windows Update. Do NOT install any drivers for graphics etc.
    -I did NOT do any updates with HP Assistant
    -Run the update via Wired network, disable WiFi and Bluetooth
    -I did disable all things in Autostart. Could be reached via Win8 taskmanager
    -Ran Microsoft Compability checker
    Update went fine this time.
    Some of my steps might not be needed. And of course if MS compbility checker says a driver is not compatible you will have to update it.
    Hopefully it will get you there.

  • After upgrading to windows 10 Auto-rotate and touchpad gestures does not work

    I have installed the latest HP Support Assistant for windows 10  and I have installed the updates  Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings  I have checked the box of "Allow the screen to auto-rotate" But all these have not worked. Please find a solution for me.   

    Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

  • Envy x2 auto-rotate does not work, after upgrading to windows 10. And touchpad gestures

    I have installed the latest HP Support Assistant for windows 10  and I have installed the updates  Intel Virtual Button DriverHP System Event Utility Updates failed to install without giving reason: Intel Serial I/O driver Intel Management Engine Interface (MEI) Driver In display settings  I have checked the box of "Allow the screen to auto-rotate"  In Windows Update I have updated with Update for Microsoft Windows (KB3074678)Update for Microsoft Windows (KB3074676)Update for Microsoft Windows (KB3081424)  In Device Manager under Sensors HID Sensor Collection V2, working properlySdo Sensor V2, working properly I have done deleting these devices and reinstalling them  In User Account I have created a new user with password. Auto-rotate did not work in that user    But all these have not worked. Please find a solution for me.   About the TouchPad gesture: swipping inside from the left use to switch app, now does not work.swipping inside from the right use to bring out charm bar/ action centre, now does not work  

    Yes. I found the answer here:http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/HP-Envy-x2-13-j020CA-Windows-10-Auto-Rotate-Autorotate-now/m-p/5212887#M115445I've tried replacing the driver on Sdo Sensor V2 device with the Simple Device Orientation Sensor and rotation works just like it did on 8.1.For the record - Sdo Sensor v2 reports the device orientation continiously, and Simple Device Orientation Sensor reports it only when the orientation changes. Must be a Windows bug then.

  • Screen auto-rotate

    Since the update Screen Auto-rotate takes forever, if at all, can take any thing from 3mins to me having to use the red button to turn the phone off?

    Try performing a system repair using PC Companion as this will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • [TP Yoga S1] Windows 10 - Auto-Rotate button doesn't work in landscape mode.

    I just updated to Win 10 on Yoga S1. A strange problem occured regarding auto rotate. When the laptop is in landscape mode (normal mode), the physical "Enable/Disable Autorotate" button doesn't work, and the Autorotate button in the action center button is disabled. However, when I physically rotate my laptop, the screen rotates, and suddenly, both buttons now are active. This defeats the purpose of the button since it can't lock rotation when the laptop is in landscape mode. Anyone having this problem too?

    Still have this problem as well. I've installed every windows 10 update I could find.BiosSystem Inferface DriverPower ManagementLenovo System Extension/ButtonSystem Update 5
    Rotation button still no work. 

  • How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landsca

    In Muse: How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landscape

    There is no way that Muse would automatically rotate the images. What you can instruct Muse to do is whether you want to show all image content and leave blank space in either direction OR scale the image to fill the frame resulting in some cropping, but filling the otherwise blank space.
    The options are Fit Content Proportionally and Fill Frame Proportionally respectively.
    Cheers,
    Vikas

  • IOS 8.3 and the auto rotation of the screen problem?

    I upgraded to IOS 8.3 and the auto rotation of the screen has stopped working on my iPad Air 2, has anyone else got this problem?

    By Control Centre I meant swipe up from the bottom of the screen to bring up Control Centre.  In there you will find the rotation lock symbol (a padlock with a circular arrow round it).  Make sure that is turned OFF

  • Myatt screen too small & doesn't auto-rotate

    It's a smartphone app that isn't designed for a smartphone size screen. Please update your myatt app to allow it to auto-rotate, like web pages, for increased readability.

    Considering the amount of money we all send AT&T for cell phones, cellular service and U-Verse service, I don't think it's too much to ask that their cell phone apps work properly with their cell phones or that their U-Verse DVRs should include the same frame advance and slow motion features as all of their competitors. (Even cheap VCR & DVD players include frame advance and slow motion.)

Maybe you are looking for

  • Image copy to folder with name based on image creation date

    Hi all, I am new to Mac OS X and automator so I would like to know the following, Is it possible to have an automated action that triggers when I attach my camera to USB, and who copies all images to a folder which is named according to the date when

  • JAAS 1.0 sample error

    I was trying to run the JAAS1.0 sample on win2000, jdk1.3. I have followd the steps with regard to the classpath and editing the policy files (with '/') etc. But when I run it I get this error: C:\jaas>java -classpath lib\jaas.jar;doc\samples\sample.

  • Installing Drivers from Leopard disk

    I installed windows and got myself through to the os seemingly ok. I popped in the leopard disk to install the drivers. From here it goes through the autorun process alright and then restarts on its own like it should. When windows loads back up I ge

  • Doesn't Make Wireless Connection After Upgrade to Leopard

    G4 Mac mini, ethernet wired to a Belkin wireless G router via a cable modem to make wireless internet connection with my wife's PowerBook G4 17" -- usually in the same room, but it works anywhere in the house. I've been running OS 10.4.11. All was fi

  • Tumblr pop-up has frozen my App Store app. How to free it up?

    Tumblr pop-up has frozen my App Store app. How to free it up?