Ellipse 8

I am not able to turn on my Ellipse 8 tablet. It was working fine this morning with more the 3/4 charge but now it's not turning on at all???

You're welcome; glad that was an easy fix.

Similar Messages

My Ellipsis 8 can no longer detect my gym's wifi signal. Please help!

I used my Ellipsis 8 to watch Netflix over the open wifi signal at my gym for 2 months with no problem. One day I showed up and no signal was found. I went through all the trouble shooting steps all the way down to factory resets with no resolution. Called Verizon tech support and still nothing. They had me send them the tablet in a recovery box. One week later I have the tablet back and they said nothing was wrong with the unit. I went to the gym today and it still can not detect the signal. My Samsung phone picks up a very strong signal. No other people have reported a problem with wifi connection issues. Obviously Planet Fitness will not allow me to start messing with their router. Any suggestions would be GREATLY APPRECIATED!

I understand the importance of ensuring you are able to get connected to wifi michaeltatham. Allow us to get to the bottom of your tablet concerns. Have you recently installed any new software or new applications when it stopped connecting to the gym wifi? Have you tried to connect another device to your gym wifi?
Thank You,
MichelleS_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Why did my data usage skyrocket with Ellipsis Jetpack?

My old wifi went down and the Verizon office sold me an Ellipsis Jetpack. My data usage immediately started going up although my Internet habits remained the same. I turn the Jetpack off when I'm not logged in and I changed the setting to only allow one user. I changed Facebook to not automatically start videos and I hit pause on every video that comes up on news feeds. I feel like I'm getting ripped off. I saw some discussion here earlier (can't find it now) that others are having the same problems but saw no answer from Verizon. Also, there are no diagnostics available online to see what is causing my usage to be so high and someone suggested that Verizon is blocking access to the information. Would I be better off finding a different wireless internet provider?

Same thing happened to me. Can't understand why. We'll see if they charge overages.

Ellipsis jetpack mismatch data usage with alerts

Ok, I have the ellipsis jetpack and for the past couple months I've had varying data usage issues...
This month, it mysteriously used more than 2 gb of data minimum without anything to my knowledge, being connected to it.
So I up the data and just dismiss it as the PlayStation 4 bring on and "the crew" coming out, since it may have updated content while I was sleeping for the other 9 gb.
But this morning, I have an email saying I've used 90% of my data allowance (of 20 gb). email time is 1:52 am, yet both the website and the jetpack show the data usage as of 6:18 am today 12/13 to be 15.3 gb (website says like 15.336).
This is frustrating to say the least, and really makes me like Verizon is trapping me into paying more money!
I also have family guard on the device and it's currently set to not allow more than 17 gb. It's been setup that way for probably a week now.
Also, before I upped the data cap from 10gb, I got two alert emails for each alert level, hours apart.
The first 50% was around probably 10 am, the second was late that night, after eight, I believe. Right around that same time, I got a 75% followed by 90, and later, another each of 75 & 90.
Imagine the frustration! Especially now that I'm paying an extra 4.99 a month to protect myself from going over the usage limit!
I was playing a ps4 game last night online (the crew), but didn't download anything outside of that, and watched a video or two on the net, both were short videos. All worked fine, and didn't have the email alert until this morning when I woke up.
Also: this is my first post, done from a tablet, so I'm sorry if it goes to wrong place

SHARED DATA DETAILS
Cycle Ends: 12/15/2014
Total Shared Data Used
15.366GB /20GB
Estimate as of 12/13/2014 12:51 PM
And yet I have an alert that says I've used 90%.. Copy/pasted below
Fri Dec 12 2014 11:52:56 PM from 900080002020
Verizon FamilyBase Msg: You have used about 90% of your data limit. When you reach your limit, your data use may be restricted for the rest of the cycle.
I have a 20 GB plan. 90% of 20 GB is 18 GB.

How do I pull up a wifi signin page on my ellipsis 7

When I connect to a wifi network that requires a signin page, the page will not pull up in google browser. I had a kindle and it would automatically popup so I could sign in. the Ellipsis 7 shows that it is connected, but across top it shows a ? mark over the towers in the left hand corner. It shows on the right that it is connected but I can't "go anywhere on the internet" until I sign in. I only have google chrome as the browser,

Here are a couple of other posts I found ... they might prove helpful.
Verizon Ellipsis™ 7 Support | Verizon Wireless
ellipsis 7 wifi
Ellipsis 7 not able to log in to XFinity WiFi

In lightroom 5.3, I do not see the radial filter ellipse.

Yesterday I purchased Lightroom 5.3 and tried the radial filter. It seemed to work fine.
Today I can not longer see the filter's ellipse. What am I doing wrong?

Press "H".
When using the Radial Filter, there are various options using the "Show Edit Pins" menu at the bottom of the image. Pressing the "H" keys toggles between "Never" (likely what you have) and "Auto" (which shows the pins and the elipse when the mouse is over the images, but hides them when you move the mouse off the image). There are other options as well, experiment with them to get to your preferred display state.
These same display options are also in the Gradient tool and the Adjustment Brush.

How to attach a text in the center of the Ellipse using JXML ?

How to attach a text in the center of the Ellipse using JXML ? Can we use labelFor="$topEllipse" ?
<StackPane fx:controller="myfxml.ArchiveLogsController" id="Login" xmlns:fx="http://javafx.com/fxml">
<children>
<AnchorPane>

<maxWidth><Double fx:value="-Infinity"/></maxWidth>
<maxHeight><Double fx:value="-Infinity"/></maxHeight>
<children>
<Ellipse fx:id="topEllipse" centerX="100" centerY="100" radiusX="50" radiusY="10" strokeWidth="2" stroke="#FF0000" style="-fx-fill: linear-gradient(to right, white 0%, red 100%);"/>
*<Label fx:id="ArchLogs_lb" text="My Ellipse Label" />*
</children>
<properties>
<backgroundColor>
<Color blue="1.0" green="1.0" red="1.0" />
</backgroundColor>
<elementLockSel>
<Boolean fx:value="true" />
</elementLockSel>
</properties>
</AnchorPane>
</children>
</StackPane>

I'd suggest putting the Ellipse and the Label in a StackPane.
I wonder why so many people call it JXML?
It is so strange - I guess the JXML name just seems more natural to some people, though I don't know why.
I think Greg is right and that labelFor is not what you want:
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/Label.html
"Labels also are useful in that they can have mnemonics which, if used, will send focus to the Control listed as the target of the labelFor property . . . A Label can act as a label for a different Control or Node. This is used for Mnemonics and Accelerator parsing. This allows setting of the target Node."

How do I telll if a art is a rectangle/ellipse/polygon/star etc.?

When iterate through arts in document, I can tell if a art is kPathArt or not by call GetArtType(). Is there anyway that I can even tell if a kPathArt is a rectangle/ellipse/polygon/star etc., something like IsEllipse()?

Not as far as I know.

SharePoint 2013 - getting an error while clicking on the ellipsis of a document in a Document Library

I have a standard out-of-the-box Document Library. versioning/checkin/out is enabled. There are a few extra columns added to the library. There is this a weird random behavior when clicking on the ellipsis (...) button on a document. Sometimes it will display
the context menu and sometimes it will give me this error:
TypeError: Unable to get property 'FileLeafRef' of undefined or null referenceTypeError: Unable to get property 'ItemType' of undefined or null referenceTypeError: Unable to get property 'ID' of undefined or null reference
Sometimes a refresh will fix it. Sometimes it won't. It's all pretty random.
Anyone have this issue or have any ideas on how to solve it?

Hi
"TypeError: Unable to get property 'FileLeafRef' of undefined or null reference"
You can find some alternatives here (none of which have I tried or am I recommending):
http://alternativeto.net/software/hotspot-shield/
I'd still suggest ensuring you are running the latest version and contacting the vendor
"TypeError: Unable to get property 'ItemType' of undefined or null reference"
please try to test the site using IE Compatibility View, compare the result.
Also, try to reset IE , compare the result.
Here is a similar posts for your reference:
http://social.technet.microsoft.com/Forums/en-US/6efe0564-7df9-4812-b08b-a9d36e3c257b/typeerror?forum=w8itprogeneral
TypeError: Unable to get property 'ID' of undefined or null reference
http://community.microstrategy.com/t5/Web/TN204030-TypeError-Unable-to-get-property-id-of-undefined-or/ta-p/204030
Indul Hassan
Microsoft Community Contributor
http://www.indulhassan.com
You Snooze.. You Lose !!

SharePoint 2013 - In document library, an unexpected error has occurred when a user clicks on ellipsis then "EDIT"

Just as the title infers, I have a user who is experiencing an unexpected error when he clicks on "EDIT" after clicking on the ellipsis. Document in the Document library is an MS Word file.

Hi,
According to your post, my understanding is that an unexpected error has occurred when a user clicks on ellipsis then "EDIT".
Please make sure he has the edit permission.
Please make sure the Office 2013 is installed correctly on his computer.
In addition, I recommend to use another brower to check whether it works.
If so and the error message persists, please check the SharePoint ULS log to find more information about this error, the ULS
log file is in the location: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
More information:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

The 10.4 upgrade smart playlist editing has removed the ellipse as the 3rd button option along side the adding or removing a parameter. Why? And can we get it back?

I just did the iTunes update to 10.4 (80) from 10.3 on a MacPro OS X 10.6.8 . I am extremely nervous and saddened by a subtle change to the smart playlist editing features. I have 178.26gb of music, and a very extensive array of playlists and smart playlists taking full advantage of all the wonderful features and complexity someone has taken the time to develop. I have taken years of time developing my library, and this one little change will set me back substantially. The change? Removing the ellipse as the 3rd button option along side the adding or removing a parameter. The button allowed one to create levels or groups of parameters within the dialogue window that could act independently within one smart playlist. For example, songs from artist "A" needs at least 2 stars to be included, while songs from artist "B" need three stars, and they both can be in the same smart playlist which has its first level of complexity. I have lists that go dozens of layers beyond. And dozens more that cross reference. Is there any way we can get the hierarchy back, ie. Reintroduce the ellipse button? Or is there something new I do not know about? Thanks!

I would like to second this.
This subtle yet life-changing removal is a total loss for advanced users that (used to) take full advantage of "logical and hierarchical" playlists. It tremendously impairs the "smartness" of the feature, effectively removing the possibility of mixing "and" & "if" parameters—which was the real beauty of the whole concept of "smart playlists" à la iTunes.
Here's a simple example. I would like to create a playlist combining two genres (rock and electronic) with only songs that have a rating higher than 3. I cannot do that anymore. I need to create two playlists:
a first playlist (A) that displays [Rock] OR [Electronic] (note that this playlist will never be played, it's an intermediary step required for B)
then a second playlist (B) that displays [songs from playlist "A"] AND [with a rating higher than 3].
It's a pain. And it clutters up browsing lists on my iPad/iPhone a lot.
Smart playlists should get the ellipse button back!
Moreover, the possibility of creating / editing smart playlists on iOS via a nice menu would be just… awesome. I would have thought Apple was going in that "smart" direction with iTunes. In hoping it's just a delay… until iOS 5 maybe?

Ellipsis 7 tablet - drops wi-fi and goes to mobile data w/o telling you, and for no reason?

I don't totally hate my Ellipsis 7 tablet. It does have a nice, bright screen, and it does have a fairly fast processor.
This is where the compliments stop.
1.) It's glitchy. As others have stated, icons do seem to disappear.
2.) It seems to "lose communication" with my high-end Sandisk micro-sd card (that has no other problems when used in my smartphone.)
3.) The battery life could be a lot better - you will charge it every day, even with minimal use.
but my biggest problem with this tablet (which I got from my local Verizon store) is it's "sneaky behavior" with mobile data. I am nearly convinced that these devices are designed, intentionally, to use up your mobile data whenever possible, even when solid wi-fi is available.
Have any of you Verizon Ellipsis 7 users, that use these primarily at home with wi-fi available, noticed a rather large increase in the mobile data being used?
This is sort of long, so I appreciate everyone who takes the time to read this...
Here's my scenario; which I can duplicate.
I live in a place with 2 strong wi-fi networks available. The tablet accesses both of them with no problem. Speed tests show 10Mbps download and 0.768 Mbps upload, the speed we pay for.
One night, I get the text messages from Verizon that I'm close to using all my mobile data. (which I appreciate) But I'd been getting so many texts, emails, etc., that day I didn't look to see what the alert was. My bad! So, I'd gone over and approved $10 to upgrade with one more GB of data. I figured it was a fluke; that somehow I had turned off my wi-fi, or it had gone down, or somehow something happened that made the tablet switch over to mobile data.
...but I was watching more closely now...
less than 24 hours later, I'm getting those messages again! I'd used one GB in less than 24 hours??? So I called Verizon, and we went through the normal putting limits on the device, etc., so it couldn't happen again.
So then, I asked him the simple question? When not 1, but 2, strong wi-fi signals are available, why would this device switch over to mobile data, WITHOUT letting you know???
He couldn't answer that. He transferred me to someone else that was "higher" in techincal support. She was a sweet girl, and really wanted to help me, but she never understood my problem. At one point I said to her, "Look, it's simple. These devices always default to wi-fi if available. What would make them disconnect from wi-fi and go to mobile data instead?" Her answer was that she needed to look up if a tablet was supposed to connect to wi-fi first... uh, OK.
At the end of a very frustrating call, she offered to send me a box to ship it back to Verizon in. They would then decide to repair or replace it. I would be without a tablet for a minimum of two weeks. I said Thanks but No Thanks, I would just disable mobile data entirely. The lady I spoke with did not seem pleased with my decision, but what could she do? And we ended the call.
So, I'm still trying to figure out what is making this thing kick over to mobile data (remember I just shut mobile data off entirely before I hung up with Verizon) and I was currently connected to an external bluetooth speaker (which shouldn't have anything to do with anything, I realize), when I started a video on YouTube.
Now, mind you, I was ALREADY showing connected to a strong wi-fi network.
And up comes a dialog popup, asking me to turn the wi-fi back on, even though I would incur additional charges!
BUSTED, VERIZON!
This message doesn't come up when it tries to switch over from wi-fi to mobile data unless you have completely shut off mobile data.
I only mention that I was connected to an external bluetooth speaker because it is the only way (SO FAR) that I have been able to duplicate this "silent switchover" repeatedly.
If I'm on Youtube first, not connected to my bluetooth external speaker, the device will stay on my wi-fi network when I pause the video, connect to the bluetooth speaker, and then restart the video.
If I'm already connected to the external bluetooth speaker, and then open a browser window or youtube video, the device will attempt to change its connection from wi-fi to mobile data. There is no reason for this!
Yes, yes... I realize that being connected to an external bluetooth device should have absolutely nothing to do with whether the tablet should keep its wi-fi connection or switch to mobile data...
except that it does! And there may be other circumstances that I haven't found yet... I don't know, but I'm watching!
At the end of the day, ANY DEVICE THAT IS GOING TO SWITCH FROM A WI-FI NETWORK TO MOBILE DATA, FOR ANY REASON, SHOULD TELL YOU IT'S GOING TO SWITCH, AND LET YOU DECIDE TO ALLOW THAT CHANGE OR NOT, especially when there is NO REASON for the device to switch in the first place. In the same household are my Samsung Galaxy Note 3 and husband's Galaxy S5. They never exhibit this behavior, and yes, we use internet on our phones at home rather frequently.
Watch your mobile data folks...
Oh, and the Verizon lady called back about 30 minutes later... asking me again to agree to send my tablet in. I explained to her that I could now duplicate the problem. I told her that it would be easy enough for them to check and see if all devices are doing it (which I'm guessing they all do! there's not enough memory to download any apps, so I doubt it's that...) I said that with the millions of Ellipsis 7 devices they have, someone in tech support can grab one and try it. Still no luck, and she still wanted me to send it back and be without a tablet for 2 weeks or more. I declined.
Anyway, if you've read this far, I thank you! I would like opinions as to whether you think this should be happening or not, and whether you have had this happen to you or not with this tablet. Thank you for your time!

Hello this is happening to us also (minus the Bluetooth speaker). We can't figure out what is causing the data usage. I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started. Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours. My husband called Verizon and got the usual doubting Thomas response. I understand that they don't know my device settings. So over the phone we check all the settings and turned off every possible culprit eating up the data and end the call. By now I have purchased another gig for the month! Assured we are NOT using mobile data, we continue on the IE path to bliss. HA! A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data. After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card. This has stopped the data usage, but it defeats the purpose of having the data plan. I could have just stuck with my Surface. Verizon sent us a new sim card. Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot. I am surprised at the number of complaints about this device. When we called the Verizon support acted as though this was the first time they had heard about this. Loved your post, you should write for a living.

Editing text on a Mac (Acrobat 9) causes text to show on Windows as ellipses

I'm a relative newbie to editing in Acrobat and forms but I'm usually a quick learner..
What I'm seeing is when I take an existing form with largely Helvetica Neue and edit the form on a Mac (my principle machine),
when I try to view the form on a Windows machine in Adobe reader, ellipses (look more like bullets) appear where my edited text is.
Funny thing is it is only the text I've edited within a single text box.
For example, if I started with
The fox jumps over the hen
And I edit it to say
The fox jumps under my bed
What I see on Windows Acrobat reader is
The fox jumps * ** ** *** ***
(using *'s in this form as the bullets I'm seeing aren't easily available)
Anyone have any suggestions or ideas?
==Forrest

There are several fonts listed...
HelveticaNeue (Embedded Subset)
HelveticaNeue (Embedded)
HelveticaNeue
HelveticaNeue (Embedded Subset)
HelveticaNeue,Bold
HelveticaNeue-Bold (Embedded Subset)
HelveticaNeue-Bold (Embedded Subset)
TimesNewRoman,Bold
What's weird is I literally edited a small amount of text within text boxes (I did not add any new text
boxes because I don't have the original source document). The font properties for these text boxes
is set at the text box level and only the text I edited is unviewable on the windows machine. The
text I did not disturb displays correctly.
==Forrest

Why can't I sign into Verizon's Cloud on an Ellipsis 7?

Have a new Ellipsis 7 with software MV7B_31D41_422Y
Open the Cloud app on the Ellipsis and sign into Verizon account and I get:
"Mobile Number Changed.
The Mobile number for this phone has changed to 650-xxx-xxxx (the # listed in My Verizon for this device).
Before you set up Verizon Cloud...
When the phone restarts..."
I click OK and it briefly shows "Mobile number updated" then returns to the log in screen.
Restarted the Ellipsis 7, force closed Cloud, deleted and reinstalled Cloud, made sure Cloud is enabled in My Verizon, same results.

I'm sorry to learn of the Cloud issues you are encountering jpnsco! Let's get some more clues! Were you able to access the Verizon Cloud from device before? When was the last time that you were able to access the Verizon Cloud from this device? Did this issue start after installing/updating any application/software? Are you able to login to your My Verizon account http://bit.ly/xB4iTc using this device credentials?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Safari "Download Linked File As ..." dialog box seems to convert 3 or more consecutive period chars (\056) in the new file name into a Unicode ellipsis char \342\200\246 in the file name. How prevent this ?

Safari "Download Linked File As ..." dialog box seems to convert 3 or more consecutive period chars (\056) into a Unicode ellipsis char ( \342\200\246 ) in the file name that I type. How does one prevent this ?

I know nothing about “EndNote”, but allow me to give you some general advice. Your first, commented-out, line (“--section to wait for window to pop up”) indicates that you need to change the basic way you are tackling what you want to do. When writing any script, if you know the name and location of a file or a directory (folder) you should not cause (or allow, or need) your script to open an Open or a Save window -- just use the path that you already know.
Andreas

How can i view the ellipse and the points on the ellipse in order to modify the settings when i'm using the iris blur filter on Photoshop CC 2014

I can't use this blur filter (diaphragm) because i see nothing that could allow me to increase, decrease or move the ellipse that normally appear(?) on the screen. What's amazing is that this filter does his job on photoshop CS6, but not on Photoshop CC 2014 ?! Thanks in advance for your help. Serge.

Start from the beginning
- Select the Rectangle Tool - go to Options Bar, ensure 'Shape' options is on from the the Pick a Tool Mode drop down list.
- Draw Rect. This should create a vector Shape Layer.
- Select it in the Layers Panel: The Properties Panel then should highlight the Density and Feather options.
What happens here when you drag the Feather slider? On my end it feathers the vector shape as a whole.
If you need further masking capabilities, then apply a Layer Mask to the Shape and proceed with the Properties Panel Density/Feather options.
h

Ellipse 8

Similar Messages

Maybe you are looking for