Ellipsis 7 boot loop after ota

I updated my tablet via OTA last night and now it won't get past the "powered by android" screen. The screen backlight turns on but the display is black.

This is very strange Kroewe! We definitely want you to have a device that powers on and works as intended! Is there any physical/water damage to the device? Is your device within one year manufacturers' warranty? Try connecting your device to a USB port on your computer and test power on. Keep us posted.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

DROID in boot loop after OTA update

Just accepted the update today. After phone updated and attempted to reboot...its in a continuous boot loop. How can I stop it?

Try taking the battery out. If it still loops when you try to power it on, then the only other thing to try besides a factory reset is to take it to a verizon store and see if they can do anything.

Z68a-gd65 boot loop after bios update using USB

Hi there,
My z68a-gd65 (G3) went into a boot loop after I did a bios update from a USB key that I installed using the latest BIOS version on the MSI site 7681vP8.zip
After the system restarted, it keeps booting up for 5 seconds and then shutting down, I removed all external devices and the Geforce GTX 550 Ti card and used the onboard card, but still no change...
Is there a way to set the board to factory defaults again???
Marcel

Hi there,
Maybe for others to solve the same problem, I found out what was the cause of this problem, I had a USB/Firewire card installed in the PC, after removing it the BIOS update could proceed from the USB stick as planned.
After the update though, my USB/firewire card can still not be installed back into the slot, because doing so will make the boot loop appear again, very odd!
Does anyone know why this new BIOS will not work with the card that has been inside my PC for 2 years???
Marcel

4404 WLC stuck in boot loop after upgrade

In prepping for the upgrade to 4.1.185.0 I've got two controllers at different sites stuck in a boot loop after applying 4.0.219.0. Units will not even get to the <ESC> option menu.
ANy ideas?

Did you clear the configuration on the controller by using Option 5 in the boot menu? This will corrupt the boot image. You should not choose the clear config (option 5) from the boot menu on controllers running 3.2.78.0, 3.2.116.21, 3.2.150.6 or 3.2.150.10, 3.2.171.5 or 3.2.171.6, 4.0.155.5 or 4.0.179.8 and 4.0.179.11.

My ipod is stuck in a boot loop after restoring

My iPod touch 4g is in a boot loop after restoring
It will boot up but 10 seconds later after the unlock screen it goes into the apple boot screen please help!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Windows 10 Upgrade infinite boot loop after reset

I did a Windows 10 upgrade on an old computer with these specs:-Windows 7 Pro- 64 bit-Dell Optiplex 755-4 GB RAM-Intel Core2 Duo processor Everything ran fine after the upgrade. However I wanted to do a clean install. So I did so and chose the option to not keep any files or programs. It went through the process and was stalled at 99% for some time. I let it run over night. I came back and looked at it about 16 hours later and the 99% was gone, but the "hourglass" was still going. I pressed Escape and then CTRL+ALT+Delete to try to get it to respond. Now it is stuck in an infinite boot loop. It will reboot and then after several minutes it brings up an error message of "Your PC ran into a problem and needs to restart...- Inaccessible boot device." Then it restarts and the loop starts over.I've tried booting into safe mode using F8, but...

These days, there are many ways to combine electronics. Custom gaming PC? No problem. Raspberry Pi arcade? Easy. GoPro on the hood of your RC car? Awesome!I thought up this combo, a tiny portable computer with a huge screenhttp://www.newegg.com/Product/Product.aspx?Item=0FC-001H-00017&cm_re=pico_projector-_-0FC-001H-0...http://www.newegg.com/Product/Product.aspx?Item=N82E16883400001&cm_re=compute_stick-_-83-400-001...What are some of your cool tech combos?

KB300061 - Boot loop after isntalling

We are in an enterprise running Win 7 x64 on all of our workstations. Our updates are managed by WSUS, and we have an auto approval setup to allow critical and security updates to be installed. This morning, several of our workstations requested a reboot
to finish applying updates. Upon rebooting, many of them were stuck in a boot loop. Windows would attempt to load, it would then blue screen for a fraction of a second, then brought up the recovery menu. Here's what we've tried:
- Startup repair
- MBR repair
- SFC /scannow
- DISM (tried removing packages individually and rolling back)
- System restore (no restore points)
- wusa to uninstall packages by KB (catastrophic failure)
- Safe mode doesn't boot
None of what we knew to try worked. The one thing the computers stuck in the boot loop have in common is the model number. They are all HP Probooks, sharing the same model number. None of my other computers in the enterprise had trouble applying the updates.
I'm conflicted. Any advice or help would be appreciated!

Hi,
Please refer to my reply in another thread, follow the steps to troubleshoot your problem for test.
https://social.technet.microsoft.com/Forums/windows/en-US/3d9d948e-eaf9-43e0-92e7-bebb96cb6180/stop-error-0x7b-after-windows-updates-101410152014?forum=w7itproappcompat#73e3402b-c420-48c6-b2e7-b4a6a5be327c
Roger Lu
TechNet Community Support

MSI P67A-GD53 (B3) Boot loop after BIOS update

Hi,
I've just updated my BIOS to 7681v42 from an earlier version (can't remember which one exactly) and after the update I am stuck in a boot loop. The computer turns on for about 5 seconds or so and then switches back off, the CPU fan, motherboard fan & video card fan spin for a few seconds then power is cut.
I've tried booting up with nothing else connected (no vga, memory, hdd, empty USB slots) to no avail. I have tried resetting the CMOS as well but I don't get any further than the reset loop.
Can anyone suggest something? Is there any way to force the MB to use the backup BIOS?
Thanks in advance.

You can try doing this again with a single stick of ram or some different ram, but more than likely you will need to rma the board for re-flashing.

SG300-28 switch in boot loop after firmware upgrade

After performing a firmware upgrade on an SG300-20 switch from ver 1.1.0.73 to 1.2.5.70 the switch now boots up with the following error and resets:
30-Aug-2011 10:47:33 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter %s is too long.
The attached file contains a full output of the console boot process.
I have tried loading different versions from the console, but all produce the same error.
Has any one any idea how to resolve this issue?
Thanks
Des

Hello Tom, Thanks for your reply,
I had done the process before with the 3 firmwares offered in the cisco website. I did it again, and i get a boot loop again, with following error:
%L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too long.
Any ideas?
Thank you,
Nico
Console
     Startup Menu
[1] Download Software
[2] Erase Flash File
[3] Password Recovery Procedure
[4] Set Terminal Baud-Rate
[5] Stack menu
[6] Back
Enter your choice or press 'ESC' to exit:
Downloading code using XMODEM.
-- Download complete --
Calculating file's checksum...OK
Erasing FLASH ->>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Writing to flash 0x6aa500 records...
Setting checksum: 0x350925f6 , Address: 0x0
OK.
Flash programming success.
Perform WARM BOOT ...
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.0.4 Built 08-Apr-2010 16:37:57
Networking device with Marvell ARM CPU core. 128 MByte SDRAM.
I-Cache 16 KB. D-Cache 16 KB. L2 Cache 256 KB. Cache Enabled.
MAC Address   : 58:35:d9:96:7f:5d.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from image-1
100%
OK
Running from RAM...
Board ID is 22
Device ID 0xdf5111ab
*** Running SW Ver. 1.2.7.76 Date 19-Jul-2012 Time 17:54:43 ***
HW version is V
Base Mac address is: 58:35:d9:96:7f:5d
Dram size is : 128M bytes
Dram first block size is : 101376K bytes
Dram first PTR is : 0x1900000
Dram second block size is : 4096K bytes
Dram second PTR is : 0x7C00000
Flash size is: 16M
19-Jul-2012 17:54:46 %CDB-I-LOADCONFIG: Loading running configuration.
19-Jul-2012 17:54:47 %CDB-I-LOADCONFIG: Loading startup configuration.
Device configuration:
Slot 1 - SF302-08MP
Device 0: GT_98DX1005 (AlleyCat)
-- Unit Standalone                --
Tapi Version: v1.9.5
Core Version: v1.9.5
19-Jul-2012 17:55:02 %L1Mngr-F-PARAMTOOLONG: csco-sb parameter serialNo is too l
ong.
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.7.76 (date 19-Jul-2012 time 17:54:43)
***** DEBUG *****
DEBUG LOG IS EMPTY
0x16a614
0x167054
0x6bdc18
0x490518
0x4959e4
0x495bac
0x815674
0x816b10
0x817e64
0x1d51e8
0x1cb010
0x121d3c
***************** SYSTEM RESET *****************

Neo V goes in Boot-loop after Bluetooth Switch On on ICS

I have updated my Neo V to ICS from GB. As informed by Sony ICS ROM is bit slow and performance is affected too & Sony also informed customers that Xperia 2011 Phones are not going to have JB update. I AM OK WITH THAT.
But they never informed us that ICS ROM would be unstable to the extent that it can fail at any point of time. The Latest ROM of ICS goes in Boot-loop afer some switch on & off of Bluetooth, I have to flash the phone thrice thru SUS. I am unable to understand if a ROM can crash at any point, then what's the difference between Stock ROM (which needs approval at various points, at lest Sony Says that). If a ROM has serious Bugs which needs to be removed a OTA update is must. Dear Sony you need to learn to keep your promises by not just releasing ICS but a stable ROM of ICS.
If these are the service standards & build quality of Sony phones I think one should prefer cheap china phones instead.
Can some one from Sony help me doing away with boot-loop due to Bluetooth on ICS?????

Please use the search feature before posting new threads.
See this thread for more info.
http://talk.sonymobile.com/thread/103362
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

P67a-c43 boot loop after bios update

Last night, I attempted to update the bios on my P67A-C43 (B3) board using the version 5.1 bios. After the BIOS installed, it restarted and came up with the "all settings were reset to default values. press f1 to run setup. press f2 to continue" I hit f2 and my system keeps resetting in an infinite boot loop. I was able to reset the BIOS using the reset button on the back of the board to get back to the bios prompt, but pressing either f1 or f2 puts it back into the boot loop. Any help would be appreciated.

Quote from: ScunnyUK on 01-February-11, 16:08:59
Hi,
The blue screens started after a clean Bios flash to the 18b10 bios then eventually it stopped working complety (just doing the start up cycle over and over)
I had tried reseting cmos and it doesnt make a difference, the motherboard will not post , boot , start up at all so default settings cant be set (although reseting cmos would set to default anyway)
Each time the board goes through the start up cycle (i.e. upon pressing start button the board will start up with fans spinning for a second then shut down, start up again with fans spinning for a second then shut down, continuasly repeating until main power is removed) I have used a multimeter to measure the voltage read points on the board and they show that there is no vcore being suplied to the cpu but all other points show the voltage is being supplied to those componants, so imo that is where the problem lies and I would sugest that the other ppl who are having this issue to also try measuring the voltage read points and see if the same thing is happening on thier boards .
If others are getting the same results (no vcore) then the msi techs should be informed of this issue..(imo)
1.8b10 still is a beta bios. I got random bluescreens with that one also at some point a blinking bios led. So I flashed back from secondary bios (using the first option (change disable in enable)in "security" in the EFI shell to allow flashing from secondary bios), blinking bios led now stopped, Then I flashed with 1.7, no issues sofar cpu now running stable at 4.5Ghz (already 2 days).

P780 boot loop after factory reset

From couple of days ago I started to get popups saying "android ____ .com" or something and every time I clicked OK the message would pop up again not letting me press anything but the OK button continuesly.. so I powered off the phone I powered back up again and my phone wouldn't boot anymore. The screen said "Encryption Unsuccessful" and then there was a "Factory Reset" button right below - nothing happens when I clicked it So I went on and performed a factory reset by entering recovery mode (power button + volume up + volume down) and after it didn't work I went back to recovery mode and tried "clear cache" which didn't work so I then went to factory mode (power button + volume up) and cleared data by selecting MMC or something (it was in chinese) What happens next is, the phone enters a boot loop. It boots, shows the Lenovo logo, then turns off, then boots again, Lenovo logo, turns off, and so on. I wasn't even able to turn off the phone so I clicked that red reset button at the back I didn't try removing the battery or SD card How do I go from here?

I would like to add, whilst I was using the pin clips on the pins near the bios chip, I let the system run until it would beep. During this time, the CPU fan ran really really hard. Have I damaged the CPU somehow?

Boot Loop after switching Kernel

Hi,
we have a FUJI GP7000F 600... It ran fine with the 64-Bit Kernel ... now for a special program we had to switch to the 32 Bit Kernel Kernel/Unix. After that switching the Machine reboots itself over and over...
The Error is as followed:
Panic CPU[0] Thread=10404000
init_stubs 1
fs/procfs:pr_getseqsize() Error
resetting...
rebooting...
Now there is only a PC with a terminal program plugged in via serial ports. I want to break the boot sequence to bring up the ok prompt. But no Keyboard Sequence what i found helped.
Thanks alot
Palpatime

Thats the way im doing it but then the system goes to an infinite boot loop with the following Error
GP7000F (2 X SPARC64-III 296MHz), No Keyboard
OpenBoot 3.11 J, 1024 MB memory installed, Serial #15804168.
Ethernet address 0:80:17:28:27:8, Host ID: 80f12708.
SCF Version: 2.1.E , RCI Version: 0001
Rebooting with command: boot kernel/unix
Boot device: /pci@1f,4000/scsi@3/disk@0,0 File and args: kernel/unix
SunOS Release 5.7 Version Generic_106541-11 [UNIX(R) System V Release 4.0]
Copyright (c) 1983-1999, Sun Microsystems, Inc.
fs/procfs:pr_getsegsize() not defined properly
panic[cpu0]/thread=10404000: init_stubs 1
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetting ...
Thanks
Palpatime

Boot loop after poweroff and until shutdown by button

Hi,
I am having a weird problem. If I leave my arch machine powered off for a long time, it will enter a boot loop once turned on. In specific, the machine keeps rebooting after the "Loading initial ramdisk" message is displayed. To get out of the loop, I must shut it down again by holding the power button and then turning it on again. It will then boot normally.
I have no clue about where to start digging to find out what the problem is. Any clues?
Best regards.

Hi noctlos.
I am using BIOS + Grub and my uname -a is
Linux 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64 GNU/Linux
Please let me know if you would like any other information.

Ellipsis 7 Boot Loop

I rooted my device (my friends told me too) and I updated and it's stuck in a boot loop wont go past "powered by android" screen. What do I do?

Nothing. Your warranty is void and we cannot discuss your options on this forum.

Ellipsis 7 boot loop after ota

Similar Messages

Maybe you are looking for