ELM Add BP Master Data Fields

Hi Gurus,
How can I add business partner (BUT000) master data fields (including custom fields) to Mapping Format in ELM???
Your prompt response will be highly appreciated and rewarde...
Cheers,
Peter J

Hi Naveen,
Both of your solutions were absolutely on point. It took little time as ABAPer was bit busy. Thank you very much for your assistance; you are rewarded with the max. Points...
The following are the steps to import and create "Prospects" via ELM
1. Prepare .csv file (keep stored on local machine)
2. Activate Customizing Workflow (follow C22 building block)
3. Use BADI - CRM_MKT_LIST to enhance the custom fields (via eewb) for filter criterion = Person. This BADI is filter dependent BADI (Mapping Format dependent)
4. Implement SAP Note# 915015 for importing into "Prospect" business role
5. Define List Type(s) and List Origin(s) in SPRO -> CRM -> MKT -> ELM
6. Create Mapping Format - Web UI (log on as MKT_Prof or Power_User -> MKT -> Create: Mapping Format)
7. Add Mapping Format to BADI: CRM_MKT_LIST - Attributes -> Define Filters -> Select you Mapping Format
8. Create External List (Web UI (log on as MKT_Prof or Power_User -> MKT -> Create: External List)- use the Mapping Format
Cheers,
Peter J.

Similar Messages

  • WAD - Best way to layout master data fields for a single record

    I am creating an employee profile which will be fed from various InfoProviders in BI. I am going to lay it out so that there is a master data section at the top and then below there will be various histories (salary, job, etc) and everything will be populated by the value of a single variable.
    The question I have is what is the best way to lay out about 20 master data fields in the top section and have it look nice? My guess (and I am not fond of the tedium) is to create a bound text for each of them and bind it to the appropriate characteristic. Then just have the variable setting affect all of them.
    Anyone have any other ideas?

    Hello,
    you can use the interface command:
    storm-control unicast level 10.00
    or
    storm-control unicast bps 10000000
    The first command will limit bandwidth to 10% of what is available, the second will limit bandwidth to 10Mbps, effectively achieving the same thing.
    Check this link to the relevant configuration reference:
    Configuring Storm Control
    http://www.cisco.com/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00802c10bc.html#wp1063295
    HTH,
    GP

  • Display Title in BEX query for Master Data Field

    Hi All,
    Appreciate if someone can assist me in this.
    When we display query result, we will have results of master data field for as master data and Text, e.g Customer and customer text.
    BEX display:
    Header Line : Customer
    Display Line : 90002011   Mary Kay
                          90002023   John Smith
    For the header Line, we have title 'customer', can we have the title for 'Customer Description' instead of having it as a blank field.
    Appreciate if someone can assist me in this, I cant find this issue posted by anyone.
    Thank you.

    Hi,
    For one object you can not have seperate description for key and text.
    Either you need to have seperate object. Check if your Customer object is having some name attribute then display cutomer key with name attribute so that there will be two object and you may change the description in report display.
    If this is not possible then you may not have dirctly in reporting. You need to stage one more object in staging area with same cutomer field then one you may use as text the other one as key.
    I hope it will help.
    Thanks,
    S

  • Loading data to Master Data fields

    Can't understand how to load data from DataSource to Master Data of InfoCube. I create Transformation but don't see there how to choose Master Data fields of InfoCube - I don't see these fields there.
    Thanks,
    Olga

    Hi,
    Eg: If you have 0MATERIAL in cube, then all the attributes data will load to 0MATERIAL InfoObject, so in Cube you can find only 0MATERIAL and then in report you can find the Navigational attributes of the 0MATERIAL. So all the master data won't store into Cube.
    That is the reason why we are calling Materdata Reusabilty in BW. So all master data will store sperately in Master data InfoObjaetcs.
    Thanks
    Reddy

  • SCM master data fields

    Hi SCM folks,
    Can anybody send me the master data fields used in supply chain management.
    I am very new to SCM.
    Or else send me the names of the tables containing master data. I am working on some modelling part of MDM where they are going to be used.
    Thanks and Regards
    Devinderpal yadav

    Hi Devinderpal,
    SCM uses a lot many fields which are relevant to different Runs e.g. SNP, Deployment, TLB, CTM, PPDS, TPVS etc.
    I am giving the names of some of the master data tables which are mostly used.
    Table Name     Description
    /SAPAPO/MARM     Units of Measure
    /SAPAPO/MATKEY     Product
    /SAPAPO/MATLOC     Location product
    /SAPAPO/MATLOTSZ     Lot Sizes & Days' Supplies for Material Master
    /SAPAPO/MATLSIM     Location Product with Planning Version
    /SAPAPO/MATMAP     Mapping Table for Products
    /SAPAPO/MATPRIO     Product Priority Time & Version-Dependent
    /SAPAPO/MATRELH     Product/Location Product Hierarchies
    /SAPAPO/MATRQ     Demand Profile for the Material Master
    /SAPAPO/MATTXT     Material Descriptions
    /SAPAPO/SNP01     SNP: Demand Profile
    /SAPAPO/SNP02     SNP: Supply profile
    /SAPAPO/SNP04     Profile of Priorities Classes for Customer Demand
    /SAPAPO/SNP11     SNP: Deployment profile
    /SAPAPO/TMCNV     Data for product number conversion
    /SAPAPO/TWHMATGR     Definition Table for Warehouse Material Group
    /SAPAPO/APPLOCS     Location Master: Relevant location types for application
    /SAPAPO/LOC     Locations
    /SAPAPO/LOCMAP     Mapping Table for Locations
    /SAPAPO/LOCPROF     Version-Dependent Location Profile for Penalty Determination
    /SAPAPO/LOCT     Locations Short Text
    /SAPAPO/LOCVER     Location: Version-Dependent Fields
    /SAPAPO/EDITQUAN     Capacity Profile: Resource Bucket Capacity
    /SAPAPO/EDITTIME     Capacity Profile: Resource Time Capacity
    /SAPAPO/RESCAP     Capacity Profile: Resource Time Capacity
    /SAPAPO/RESDIM     Dimensions and Capacity of a Resource
    /SAPAPO/RESDOWN     Resource Downtime
    /SAPAPO/RESSELP     User Settings - Resource
    /SAPAPO/RESVERS     Versions Resource Capacity
    /SAPAPO/RESVERST     Texts Version Resource Capacity
    /SAPAPO/RES_HEAD     Resource Header Data
    /SAPAPO/RES_INTR     Resource Rates
    /SAPAPO/RES_TXT     Resources Short Text
    /SAPAPO/ACTREL     Production Process Model: Activity Relationships
    /SAPAPO/COMP     Production Process Model: Components
    /SAPAPO/MODE     Production process model: mode
    /SAPAPO/PLAN     Production Process Model: Plans
    /SAPAPO/PLANACTT     Production Process Model: Planning Activities
    /SAPAPO/PLANOPR     Operations in Plan
    /SAPAPO/REQCAP     Production process model: resources
    /SAPAPO/TDPP     Time-Dependent Process Parameters
    /SAPAPO/PLAN_GEN     PP/DS to SNP/PPM Generation
    /SAPAPO/PLAN_MOD     Modes Combination of PP/DS for an SNP/PPM
    /SAPAPO/PPDS_GEN     PP/DS to SNP/PPM Generation
    /SAPAPO/PPDS_MOD     Modes Combination of PP/DS for an SNP/PPM
    /SAPAPO/TR     Transportation Lanes
    /SAPAPO/TRM     Means of Transport for Transportation Lanes
    /SAPAPO/TRMCARR     Transportation Service Provider at Transportation Lanes
    /SAPAPO/TRMLDIDU     Table for Asynchronous Calculation of Distance and Duration
    /SAPAPO/TRPMOD     Assignment of Sources of Supply for Model
    /SAPAPO/TRPROD     Sources of Supply
    /SAPAPO/TRPRODM     Means of Transport for Transportation Lanes, Prod.-Specific
    /SAPAPO/TRQTAH     Quota Arrangement Header
    /SAPAPO/TRQTAP     Quota Arrangement Item
    /SAPAPO/TRTYPE     Means of Transport
    /SAPAPO/TRTYPRES     Means of Transport - Transport Resource
    /SAPAPO/TR_MS_QH     Dummy Table for Mass Maintenance
    /SAPAPO/TR_MS_TL     Dummy Table for Mass Maintenance
    /SAPAPO/DEPSET     Deployment Settings
    /SAPAPO/DSNP_OPR     SNP: Deployment Optimizer Profile
    /SAPAPO/SCZPRF     SNP Profiles for Days' Supply, Safety Stock, and Target Stck
    /SAPAPO/SNP03     SNP: Transport Load Builder Profile
    /SAPAPO/SNP04_TD     Time-Based Cost Profilees in Material Master
    /SAPAPO/SNP05     SNP: Optimizer Profile
    /SAPAPO/SNP08     SNP: Key figures
    /SAPAPO/SNP08T     SNP: Key figure description
    /SAPAPO/SNP09     SNP: Assign Category Group to Key Figure
    /SAPAPO/SNP10     Global Category Settings for SNP/Deployment/TLB
    /SAPAPO/SNP12     SNP: Lot Size Profile for Transportation Lanes
    /SAPAPO/SNP13     SNP: External Order Type
    /SAPAPO/SNP14     SNP: Name of Cost Functions for SNP Optimizer
    /SAPAPO/SNP15     Supply Network Planning: Cost Function for SNP Optimizer
    /SAPAPO/SNPBOUD1     SNP optimizer: Limit profile: Limits
    /SAPAPO/SNPBOUND     SNP Optimizer: Bound Profile: Names
    /SAPAPO/SNPCOSPA     SNP: Profile of Cost Multipliers
    /SAPAPO/SNPCOST     SNP: Aggregated Costs of Optimizer Calls
    /SAPAPO/SNPOPKEY     SNP Optimizer: Log Table Conversion
    /SAPAPO/SNPOPLOG     SNP Optimizer: Input Table Log
    /SAPAPO/SNPOPMES     Supply Network Planning Optimizer: Error Messages
    /SAPAPO/SNPOPRES     SNP Optimizer: Optimizer Results Log
    /SAPAPO/SNPOPSE1     SNP Optimizer: Selected Fields
    /SAPAPO/SNPOPSE2     SNP Optimizer: Selected Products
    /SAPAPO/SNPOPT     Internal SNP Optimizer Settings
    /SAPAPO/SNPTLB     Settings for Interactive TLB Planning
    Do reward points if helpful,
    Regards,
    Manjit

  • Assign master data fields of assets and equipment

    i want to include vehicle licence number in field assignments between FI-Asset accounting and Plant Management.
    How do i implement the enhancement to that effect.
    path spro .... AssetAccounting->Master Data -> Automatic Creation of Equipment Master Records->Develop Enhancement ..
    Step by Step please...
    But any suggestion is welcome
    Urgent.
    Edited by: Alvaro Tejada Galindo on Apr 10, 2008 12:40 PM

    hi,
    below documentation from enhancement AIST0002
    1.  Create structure CI_ANLU in the ABAP Dictionary, and define the
         fields that you want to have in the asset master record in addition
         to the standard fields. The master record data of these fields will
         later be stored in the separate table ANLU.
    2.  Create include ZXAISU03 in function group XAIS. Enter program code
         there in order to transfer the asset master data to global
         variables. The asset master data referred to here is the data that
         is transferred using function module EXIT_SAPLAIST_002, and which
         you need later for checking the field contents of the fields that
         you have defined. At the least, you should transfer the values
         transferred in parameter I_ANLU to a global structure.
    3.  In function group XAIS, define one or more subscreens that you want
         to integrate into the maintenance interface of the asset master
         record. On these subscreens, you can either
    reward points if helpful
    best regards,darek

  • Issue with Vendor Master Data-field notes ID  (Table ADRT-REMARK)

    Hello,
    I have a issue related to Vendor Master Data maintenance.
    The client wants to maintain the u201CNotesu201D field in vendor master data. The field gets populated from the field u201CADTR-REMARKu201D table ADRT.
    Now client wants to maintain some alphabet to distinguish some of vendors (i.e. 1250) out of 5000 vendors. We tried to develop LSMW, however it is not getting generated as this field is not getting recorded as the field is inside the tab (next to e-mail id field) which requires click. It seems BDC also is also not working as it is not populating these fields except e-mail id.
    The table ADRT contains filed ADDRNUMBER which is the same field in LFA1, and it is ADRNR (Address number).
    Also please note that CATT/e CATT is not permitted at all the client level.
    Can any body suggest the way to change the master data through some way.
    Regards,
    Chepan

    Hi,
    Did you heard about SAP GUI Scripting? There is SAP functionality - seems to Excel Macros. You are able to record SAP  like macros, then after small code modifcation (code is in Visual Basic), and special excel origin (there could be excel prepared like for CATT) upload data to VMD.
    If you have any questions I try to help you?
    Best regards,
    Piotr
    Edited by: Piotr Wieczerzak on Jan 26, 2010 9:35 PM

  • Add a new date field

    Hi,
    I have a requirment to add a non existing field to my query
    My actual query is like this..
    select Date ,count(*) from tablename where date is between dt1 and dt2;
    The output will be displayed for all the dates where some transactions are there..
    eg:
    Date                     Count
    25.12.2005 12:02:00 PM          1
    25.12.2005 12:16:00 PM          1
    25.12.2005 12:20:00 PM          3
    25.12.2005 12:51:00 PM          1
    25.12.2005 12:52:00 PM          5
    but the business wanted me to add an additional column which is a date field..
    ie to display all the dates between dt1 and dt2 and the other 2 fileds from the query
    if Dt1=25.12.2005 12:00:00 and Dt2=25.12.2005 12:59:00 then my output should look like this :
    Column1                Date                    count
    25.12.2005 12:00:00 PM
    25.12.2005 12:01:00 PM
    25.12.2005 12:02:00 PM     25.12.2005 12:02:00 PM          1
    25.12.2005 12:03:00 PM
    25.12.2005 12:04:00 PM
    25.12.2005 12:05:00 PM
    25.12.2005 12:06:00 PM
    25.12.2005 12:07:00 PM
    25.12.2005 12:08:00 PM
    25.12.2005 12:09:00 PM
    25.12.2005 12:10:00 PM
    25.12.2005 12:11:00 PM
    25.12.2005 12:12:00 PM
    25.12.2005 12:13:00 PM
    25.12.2005 12:14:00 PM
    25.12.2005 12:15:00 PM
    25.12.2005 12:16:00 PM     25.12.2005 12:16:00 PM          1
    25.12.2005 12:17:00 PM
    25.12.2005 12:18:00 PM
    25.12.2005 12:19:00 PM
    25.12.2005 12:20:00 PM     25.12.2005 12:20:00 PM          3
    25.12.2005 12:21:00 PM
    25.12.2005 12:22:00 PM
    25.12.2005 12:23:00 PM
    25.12.2005 12:24:00 PM
    25.12.2005 12:25:00 PM
    25.12.2005 12:26:00 PM     25.12.2005 12:26:00 PM          1
    25.12.2005 12:27:00 PM
    25.12.2005 12:28:00 PM
    25.12.2005 12:29:00 PM
    25.12.2005 12:30:00 PM
    25.12.2005 12:31:00 PM
    25.12.2005 12:32:00 PM
    25.12.2005 12:33:00 PM
    25.12.2005 12:34:00 PM
    25.12.2005 12:35:00 PM
    25.12.2005 12:36:00 PM
    25.12.2005 12:37:00 PM
    25.12.2005 12:38:00 PM
    25.12.2005 12:39:00 PM
    25.12.2005 12:40:00 PM
    25.12.2005 12:41:00 PM
    25.12.2005 12:42:00 PM
    25.12.2005 12:43:00 PM
    25.12.2005 12:44:00 PM
    25.12.2005 12:45:00 PM
    25.12.2005 12:46:00 PM
    25.12.2005 12:47:00 PM
    25.12.2005 12:48:00 PM
    25.12.2005 12:49:00 PM
    25.12.2005 12:50:00 PM               
    25.12.2005 12:51:00 PM
    25.12.2005 12:52:00 PM     25.12.2005 12:52:00 PM          5
    25.12.2005 12:53:00 PM
    25.12.2005 12:54:00 PM
    25.12.2005 12:55:00 PM
    25.12.2005 12:56:00 PM
    25.12.2005 12:57:00 PM
    Thanks
    Vamsi

    You can do it with the SQL Model clause:
      1  with t1 as
      2  (select to_date('07/02/2007 12:02:00', 'DD/MM/YYYY HH24:MI:SS') mydate from dual UNION ALL
      3   select to_date('07/02/2007 12:26:00', 'DD/MM/YYYY HH24:MI:SS') mydate from dual)
      4  select newdate, mydate
      5  from t1,
      6      (select newdate
      7       from dual
      8       model
      9       dimension by (to_number(null) as myid)
    10       measures (to_date(null) as newdate)
    11       rules upsert iterate(1000) until (&startdate+((iteration_number-1)*((1/24)/60)) >= &enddate)
    12             (newdate[0]=to_date(&startdate),
    13              newdate[iteration_number+1]=newdate[cv()-1]+((1/24)/60))) t2
    14  where t1.mydate(+)=t2.newdate
    15* order by newdate
    SQL> /
    Enter value for startdate: to_date('07/02/2007 12:00:00', 'DD/MM/YYYY HH24:MI:SS')
    Enter value for enddate: to_date('07/02/2007 12:30:00', 'DD/MM/YYYY HH24:MI:SS')
    NEWDATE              MYDATE
    07-FEB-2007 12:00:00
    07-FEB-2007 12:01:00
    07-FEB-2007 12:02:00 07-FEB-2007 12:02:00
    07-FEB-2007 12:03:00
    07-FEB-2007 12:04:00
    07-FEB-2007 12:05:00
    07-FEB-2007 12:06:00
    07-FEB-2007 12:07:00
    07-FEB-2007 12:08:00
    07-FEB-2007 12:09:00
    07-FEB-2007 12:10:00
    07-FEB-2007 12:11:00
    07-FEB-2007 12:12:00
    07-FEB-2007 12:13:00
    07-FEB-2007 12:14:00
    07-FEB-2007 12:15:00
    07-FEB-2007 12:16:00
    07-FEB-2007 12:17:00
    07-FEB-2007 12:18:00
    07-FEB-2007 12:19:00
    07-FEB-2007 12:20:00
    07-FEB-2007 12:21:00
    07-FEB-2007 12:22:00
    07-FEB-2007 12:23:00
    07-FEB-2007 12:24:00
    07-FEB-2007 12:25:00
    07-FEB-2007 12:26:00 07-FEB-2007 12:26:00
    07-FEB-2007 12:27:00
    07-FEB-2007 12:28:00
    07-FEB-2007 12:29:00
    07-FEB-2007 12:30:00
    07-FEB-2007 12:31:00
    07-FEB-2007 12:32:00
    34 rows selected.Have a look at the Oracle documentation to see exactly how this works, but basically my inner query:
    select newdate
    from dual
    model
    dimension by (to_number(null) as myid)
    measures (to_date(null) as newdate)
    rules upsert iterate(1000) until (&startdate+((iteration_number-1)*((1/24)/60)) >= &enddate)
          (newdate[0]=to_date(&startdate),
           newdate[iteration_number+1]=newdate[cv()-1]+((1/24)/60))is building a dummy table containing values 1 minute apart between startdate and enddate. You can then join to the original table. Not sure how clear that is so ask away if you're confused (but I would advise you go to the Oracle doc's first and search for info on the model clause).
    Martyn

  • Vendor Master Data fields - Description

    Experts:  Is there a list or a catalog that exists or someone has developed with a description of every field that can be used in the Vendor Master? 
    joseG
    FI/CO Consultant

    Hi,
    As per my underStanding you want a detailed information or Notes abt each and every Field in the Vendor Master record ,as Asked by your Client. Right.
    Please Use Below Table's which are related to Vendor Master Data.
    LFA1 - Vendor master
    LAB1-  Vendor per company code
    LFM1 - Purchasing organization data
    LFM2 - Purchasing data
    LFBK-  Bank details
    you can prepare a Detailed  notes by clicking on F1 on each and every filed in the Vendor Master record to get the Functionality of tht Field and also show the Links in which tables tht data will updated.
    Thanks
    Goutam

  • GL Acount Master Data: field 'House Bank'

    Hi,
    Does anybody knows what is the field "House Bank" for in GL Account Master data (SKB1- HBKID)?
    I have configured in FBZP for each "house bank" its GL Account in table T012K-HBKID but I have never informed HBKID in GL Account Master data.
    - what is SKB1- HBKID for?
    - should I inform the house bank at GL Account Master Data level?
    Cheers!!!

    House bank need to be setup for your companies transactions. The house bank is tied to a bank key which is tied to a account id eg Payroll, AP etc then the accoun ID is tied to a G/l Account, Ap could go to 113001 and PY to 113002 etc
    So the system know which G/l to pick based on the account id. The g.l is stored in the accound ids master data.
    Plz assign points if usefull

  • Cost Center Master data field status change

    Hello Gurus,
    I need to change the field status of 'User Responsible' field as required from optional in the cost center master data. I am not being able to get the exact answer from my searches. If anyone can help with an answer, it would be great.

    Dear,
    You can use screen variant also...
    Transaction code: SHD0
    and make that field as required.

  • Enhance the Master Data field in Datasource from standard source table

    Hi Friends Please help me to resolve this, would really be very kind of all of you.
    Requirement. I want to Enhance the field ZFACTREG from VIBDBE table in my datasource 0busentity_attr extract structure l_s_REIS_BUSENTITY_ATTR, I want to create the logic in CMOD exit_saplrsap_002 to call my function module for enhancement of master data. Please help me Step by Step
    Thanks
    Poonam Roy
    Step #1
    I put this code which gives me error in CMOD like this
    ERROR : Das formale Argument 'OTHERS' muss am Schluss der Ausnahmeliste stehen.
    ABAP Code#1 IN exit_saplrsap_002
    DATA: l_d_fmname(30) TYPE c.
    CONCATENATE 'Z_DS_' i_datasource(25) INTO l_d_fmname.
    TRY.
    CALL FUNCTION l_d_fmname
    EXPORTING
    I_DATASOURCE = I_DATASOURCE
    I_UPDMODE = I_UPDMODE
    TABLES
    I_T_SELECT = I_T_SELECT
    I_T_FIELDS = I_T_FIELDS
    I_T_DATA = I_T_DATA
    C_T_MESSAGES = C_T_MESSAGES
    EXCEPTIONS
    RSAP_CUSTOMER_EXIT_ERROR = 1
    OTHERS = 2
    IF FOUND.
    IF SY-SUBRC <> 0.
    RASIE RSAP_CUSTOMER_EXIT_ERROR.
    END IF
    CATCH CX_SY_DYN_CALL_ILLEGAL_FUNC.
    ENDTRY.
    Step#2
    I simple created the Function module Z_DS_BUSINESS
    and put the code in source code which gives me error . what should i put in other tabs like"Import", Export", Tables" i kept blank
    ABAP CODE give me error : The Dictionary structure or table "FIELD-SYMBOLS" is either not active. i have to remove include in the FM. WHY SO??
    FUNCTION Z_DS_BUSINENSS
    ""Lokale Schnittstelle:
    *" IMPORTING
    *" VALUE(I_DATASOURCE) TYPE RSAOT_OLTPSOURCE
    *" VALUE(I_CHABASNM) TYPE SBIWA_S_INTERFACE-CHABASNM
    *" VALUE(I_UPDMODE) TYPE SBIWA_S_INTERFACE-UPDMODE
    *" TABLES
    *" I_T_SELECT TYPE SBIWA_T_SELECT
    *" I_T_FIELDS TYPE SBIWA_T_FIELDS
    *" I_T_DATA
    *" C_T_MESSAGES STRUCTURE BALMI OPTIONAL
    *" EXCEPTIONS
    *" RSAP_CUSTOMER_EXIT_ERROR
    INCLUDE ZXRSAU02.
    WRITE: / 'INSIDE THE Z_DS_MEASUREMENTS PROGRAM'.
    TABLES: REIS_BUSENTITY_ATTR,
    VIBDBE,
    field-symbols:.<fs_REIS_BUSENTITY_ATTR> like REIS_BUSENTITY_ATTR.
    DATA: BEGIN OF i_c_t_data OCCURS 0.
    include structure REIS_BUSENTITY_ATTR.
    DATA END OF i_c_t_data.
    DATA: i_c_t_data_copy like i_c_t_data OCCURS 0 WITH HEADER LINE,
    begin of i_vibdbe occurs 0,
    INTRENO like vibdbe-INTRENO,
    ZFACTREG like vibdbe-ZFACTREG,
    end of i_vibdbe.
    i_c_t_data_copy[] = i_c_t_data[] = c_t_data[].
    sort i_c_t_data_copy by vibdbe.
    Select INTRENO
    into table i_VIBDBE from VIBDBE
    for all entries in i_c_t_data_copy
    where INTRENO = i_c_t_data_copy- INTRENO.
    if sy-subrc = 0.
    sort i_VIBDBE by INTRENO.
    loop at i_c_t_data assigning <fs_REIS_BUSENTITY_ATTR>.
    clear: i_VIBDBE.
    read table i_VIBDBE with key INTRENO = <fs_REIS_BUSENTITY_ATTR>-INTRENO
    BINARY SEARCH
    transporting ZFACTREG .
    if sy-subrc = 0.
    <fs_REIS_BUSENTITY_ATTR>-ZZFACTORY = i_vibebe-ZFACTREG
    endif.
    null

    I don' t see the dot between the two lines
    OTHERS = 2
    IF FOUND.
    Regards

  • Change form Mode as Add for master data while Loading

    Hi,All
    I have a master data form(user form). By default it will load and shows Find mode but i dont want find mode i want add mode after loading
    plz suggest me a good idea..
    By
    Firos.C

    Hi,
    After the form is loaded in the load event, change the form mode.
    objForm.Mode = SAPbouiCOM.BoFormMode.fm_ADD_MODE
    Or
    objSBOAPI.SBO_Appln.ActivateMenuItem("1282")
    Hope it helps,
    Vasu Natari.

  • Labels reversed in french in Employee Master Data, fields Branch and Dept

    Hello
    There is an error in SAP B1 2007A translation from english to french.
    In the Employee Master Data, in french, the labels Branch and Department are reversed. So our client has its Departments in OUBR and its Branches in OUDP.
    Is there a way to make a correction to those labels without creating an add-on?
    Thank you.
    Pierre

    Hello Gordon
    I've double-clicked on the labels and nothing happens. Is there a lock in the menu that has to be deactivated before we click on the labels in order to change the caption.
    I'm in the Employee Master Data interface and the labels for the Dept and Branch are reversed in the french version.
    Thanks
    Pierre

  • Lsmw Uploading cost center master data fields ERFNM,ERFDT at History tab

    Hi Gurus,
    I done uploading of cost center master data through LSMW.everything is fine but I have one issue.
    I done Uploading from 4.6 now in 4.6 the cost center was created by some one else when I am doing in ECC 6.0 system automatically taking my name as default it means I can not enter in ECC 6.o that who originally created  it  and what was that date. Is there any way to solve it or system will take only mine name in Fields( ERFNM,ERFDT )at cost center History Data while creating Master data.
    Many Many Thanks

    Yes, system will take the creator name from the person who actually creates the cost center in SAP.
    It will be filled automatically and you can not change the creator name.
    This is to ensure better audit trail and tracability.
    Regards,
    Gaurav

Maybe you are looking for