ELM Compatibility with different versions of CUCM

Hi,
We have several CUCM servers that are using the same ELM licensing server and now we want to upgrade one Call Manager server from 9.1.1 to 9.1.2. All the other servers and ELM will remain at 9.1.1.
Is this setup compatible ? Will the 9.1.2 CUCM server be able to speak with the 9.1.1 ELM server?
Thanks,
Adrian

yes

Similar Messages

Dreamweaver MX 2004 compatibility with latest versions?

Dreamweaver MX 2004 compatibility with latest versions?
I have templates in a old Dreamweaver MX 2004 and want to update my software. Will I need to go in steps to a version a few years back and then to current? Or can I go all the way to current?
I also can't get my old dreamweaver to register anymore and they have NO support for it. Any clues? It is legit an I have the registration numbers and all the same but it won't take it for some reason.
thank you all for any support you can give.

HTML is HTML. The product you use doesn't matter much except in terms of "ease of use" and quality of code it generates. MX is a dinosaur. Depending on how you built your sites with it, you may need to update your code to modern web standards. But your site's code will remain editable in any version of DW.
That said, a LOT has changed in 10 years. So if you don't have really strong coding skills in HTML and CSS, you will struggle with newer versions of DW. The interface is different, too, so it will take some adjustment.
CS6 is the only version you can still purchase.
Creative Suite 6
All the rest are available only through subscription to the Creative Cloud.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Nancy O.

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

I want to connect to a network printer hp cp1518ni with different versions of windows (win7& winxp)

I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp) . My pc with win 7 work ok but the pc with win xp not "see" the printer on the network. What is the additional driver should I install?
thanks
This question was solved.
View Solution.

Hi @OHIMATAS,
I see by your post that you are unable to network the printer to the Windows XP computer, but the Windows 7 computer is connected. I can help you with this.
Make sure the Windows XP computer is connected to the correct network name, not a Guest network either.
Print a configuration page to get the printer's IP address.
Printing a Configuration Page.
Try and access the printer's Embedded Web Server on the Windows XP computer.
Type the IP address into your web browser's address bar. (Internet Explorer)
Did it load the webpage?
If you can't access the printer's EWS, then check the IP address on the computer to see if the first 3 sets of numbers match the printer's IP. They have to match to be on the same network.
Go to start, type run in the search box, type in cmd, then type ipconfig.
Check the IPV4 address.
Now check the IPV4 address for the printer.
Do the first 3 sets of numbers match?
Try and ping the printer.
In the same window, type ping printers IP address (space between ping and IP address)
What are the results?
Run the add printer wizard through printers and faxes, if you were able to access the printer's EWS.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can PI work with different versions of MQ?

Hello
I have requirment to let PI (7.1) communication with different versions of MQ (5.3 and 6.0). However I doubt that this is possible.
As for MQ, the JMS drivers of the MQ needs to be deployed to PI. For MQ 5.3 and 6.0, different drivers (6.0 has additional jar files as 5.0) are to be packaged into com.sap.aii.adapter.lib.sda and deployed to PI. There is no way you can deploy different version of drivers onto the same PI box. even if you can deploy different version of hte driver to PI box, it won't work in runtime, simply because, when the driver is loaded, there is no way to tell PI class loader which version of class (driver) to load.
how do you guys think of this?
Thanks
Jayson

Hi
I think that the 6.0 version should be backword compatible and should work with 5.3 also.
Did you tried it?

My APE11 gets an Unable to use plug-in It's not compatable with this version of Photoshop

My APE 11 will read my Canon 70D raw file since I used the 8.3. In the organiser but as soon as I got to Edit the Raw file it just come up " Unable to use Camera Raw Plug-in" " It is not compatable with this version of Photoshop" No photo in the screen at all just a blank area with the raw sliders. And the box with the wording unable to use etc.

PortalPacific wrote:
…Here is the file im having trouble with. You can download it here if you are interested in taking a look: …http://portalpacific.net/movieposter.psd
I downloaded it and looked at it. Even Graphic Converter can't recover any pixels or meaningful data, just some general information:
In my experience, if GraphicConverter can't open it, nothing will.
Your file is toast Sorry.

Java Cache Viewer shows duplicate URL with different versions

In doing some testing lately we have come across a couple of situations where the same URL is showing in the JAVA cache viewer with different versions to them. In the case of a 1.7 JRE this is not causing any adverse effects however when utilizing a 1.6 JRE we are getting messages about mixed mode for the JAR files.
The jar file is signed as below:
Manifest-Version: 1.0
Ant-Version: Apache Ant 1.8.2
Application-Library-Allowable-Codebase: *
Application-Name: named_applet
Built-By: relbuild
Permissions: all-permissions
Created-By: 1.6.0_17-b04 (Sun Microsystems Inc.)
Caller-Allowable-Codebase: *
Codebase: *
understanding the need to change the wildcard's to domains as we move forward. I am wondering why the jar file is being listed and called twice and why it is being recognized as signed one time and not the next.
The URL is identical in the cache viewer and the java console says it is not found in the cache when it is used the second time, even though previously in the session is finds it with the correct version.
Any advice would be helpful

that i even know, but the problem is that i do not have that version of java re installed, but i found distribution 07 of the same java version, i'll try it out with that.
but when it still doesn't work, then i still would like to find the link where i can download java version 1.4.2_06.

Bible software with different version

Hi all, thanks for all good work you are doing here.
Please I want to ask: is it possible to have a parrallel bible application in my phone? I mean a bible with different versions as one application in my phone?

Steve,
Each web application has its own session within a J2EE container. You cannot share sessions, unless you deploy both apps as one web application which is probably not what you want. So, yes, the only work around I can think of is abandoning container-managed security so you can navigate to the other web app with some request params that cause an "auto-login" to happen.
Steven Davelaar,
JHeadstart Team.

Digital persona(fingerprint reader) extension is incompatable with firefox 4.0b7 and many more extension which is working in firefox 3.6 is not compatable with this version

Current version of firefox shows "Digital persona(fingerprint reader) extension is incompatable with firefox 4.0b7" and many more extension which is working in firefox 3.6 also not compatable with this version what should we do because this extensions are very useful for me in my laptop

I got this reply from DigitalPersona:
"DigitalPersona made the decision late last Spring, to discontinue the Personal products. There will be no further revisions."

Primavera P6 R 8.2 compatibility with OID version 10.1.2.0.2

Hi,
Below mentioned is current OID version and Primavera version available:
OID: 10.1.2.0.2
Primavera: P6 R 8.2
As per Oracle Support Team, P6 R8.2 has not been tested with OID version mentioned above however it has been tested with 10.1.4.0.1
Can you please confirm about Primavera version compatibility with OID version 10.1.2.0.2 ?
Thanks
Andy

Hi,
Can anybody please respond to this ?
Thanks in advance ...

Firefox Sync on same computer with different versions of Firefox

Hi,
I know how to use Sync on two different computers and a mobile device, but how can I Sync two or more different versions of Firefox (Nightly, Beta, Aurora, Release Candidate)? I can't get the code from the other computer/firefox because I can only have one version of Firefox open at the same time. I tried it. This is my setup. I have a different Profile for each version of Firefox I have. I also have each version of Firefox installed in a different directory, for example:
Nightly - C:\Program Files\Mozilla Firefox\Nightly\
Aurora - C:\Program Files\Mozilla Firefox\Aurora\
Beta - C:\Program Files\Mozilla Firefox\Beta\
Release Candidate - C:\Program Files\Mozilla Firefox\Release Candidate\
and my Profiles are in my
Nightly - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Nightly\
Aurora - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Aurora\
Beta - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Beta\
Release Candidate - C:\Users\David\AppData\Roaming\Mozilla\Firefox\Profiles\David-Release Candidate\
and I run Firefox with the following command (Properties/Target)
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Nightly"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Aurora"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Beta"
"C:\Program Files\Mozilla Firefox\Nightly\firefox.exe" -P "David-Release Candidate"
Can anyone help me so that I can Sync all the accounts (basically, just the bookmarks), so I will have access to all my bookmarks, instead of going to the firefox version I saved it in? I would appreciate any and all assistance concerning this matter.
Thank You.

Use the -no-remote command line switch to open another Firefox instance with its own profile and to run different Firefox instances simultaneously, but do not use -no-remote with the default browser and the default profile.
* http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
Enter all details like the account name (email address) and password and the 26-character Sync key manually to connect to an existing sync account instead of using the 12-character code to pair a device if pairing isn't possible.
# open "Tools > Options > Sync" or "Firefox > Set Up Sync"
# click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
# click "I Have an Account" : Connect
# click "I don't have the device with me" at the bottom to enter the account settings (email, password, sync key)
# click the "Sync Options" button at the bottom to select what to sync (Sync Options only affect the first sync)

FILE WONT OPEN IN PHOTOSHOP CS3... Gives error not compatable with this version

i have read through several other threads an nothing suggested seems to work
when i attempt to open a particular psd it tells me file cannot be opened because it is not compatible with this version of photoshop. it was built in cs3 and worked like 5 hrs before i tried to open it to work on it didn't save it when i opened it the last time(as in i just opened it on my pc to show some one n closed it ) i tried opening it in everything suggested it doesn't work. PLEASE help it was hard work ...

How are you saving these files (i.e., where did the file that won't open come from)?
If you're saving a .psd with a NEWER version of Photoshop, then in the newer version you should go into Edit - Preferences - File Handling and change the field Maximize PSD and PSB File Compatibility to Always if you want to be able to pass the PSD files around to multiple (older) versions of Photoshop.
If you're getting the files from others, you need to ask them to make the above change.
-Noel

Can NI-PSP be used to communicate between machines developed with different versions of LabVIEW?

Hi all,
A customer has a large PC application developed with LabVIEW 2010 SP1.
They would like to add extend their system with a cRIO-9075. According to this document (ftp://ftp.ni.com/pub/devzone/tut/crio_software_versions.htm ), the minimum supported version of LabVIEW (with Scan Engine support) is LV 2011.
To minimize risks, it is preferred that we don't upgrade LabVIEW for the main application, which is atively being used in production.
I was thinking of developing the cRIO software in a newer version of LabVIEW (say, LV 2013 SP1), and using shared variables only to communicate between the PC and the cRIO.
Is this a viable option? Does it matter if the PC and the cRIO have different versions of the LV runtime?

It shouldn't matter, but then with shared variables you can never know for sure -- there are so many things that can make them break.
You might be money ahead to write the comm using TCP/IP. You know that will work.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Running executables that have been compiled with different versions of a same vi

I am writing a LabVIEW 7 program on Windwos (NT 4.0 up through XP) that will have to simultaneously call and run at least two executable modules. Both of these modules will be written using some of the same utility vis from my user libraries. How can I run the two modules if they have each been compiled using different versions of the utility libraries (i.e. the two executables will have vis with the same name but with slightly different code)?
I know i could dynamically call each vi by reference node, but that can get a bit cumbersome with dozens of vis...

Hi meludwig,
Unfortunately, LabVIEW keeps track of the different VIs in memory using the VI's name. Therefore, if you want to load multiple executables that use the same VIs but with different code, you will want to rename those VIs. LabVIEW cannot distinguish between 2 VIs with the same name but with different code. Dynamically calling the VIs using VI Server, like you mentioned, will also potentially cause problems because the executables might try to load same VI name into LabVIEW memory at a time and this will still causes problems.
My suggestion would therefore to be to rename the utility VIs to another name and save it as a custom subVI in that program. Then, make sure to include that custom subVI in the App Builder executable and you should b
e golden.
Kileen C.
NI

Problem in deserialization with different versions of JDK

I have problem related to serialization, pls suggest the most appropriate solution, the problem is that I have a class AAAA.java which extends AbstractListModel.java class of JDK, and it is serializable. When i saw the serialVersionUID of AbstractListModel.java using the java tool serialver in jdk 1.3.1 from the command line it gives 2622425607724314306 (Unique ID of class) but when i saw it in JDK 1.4.1 then it given -3285184064379168730. As the UID is changed from JDK1.3.1 to 1.4.1, Now the problem is that i serialized a file which uses AAAA.java using the 1.3.1 and now i want to open that file in my project using 1.4.1 it gives exception.
java.io.InvalidClassException: javax.swing.AbstractListModel; local class incompatible: stream classdesc serialVersionUID = 2622425607724314306, local class serialVersionUID = -3285184064379168730
at java.io.ObjectStreamClass.initNonProxy(ObjectStreamClass.java:459)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1521)
Can u suggest me appropriate solution as this file must be desirialized (Compatibility issue) as it is generated from project.
U may also try using this command in jdk 1.3.1 & 1.4.1
on command prompt
serialver javax.swing.AbstractListModel.

From the API (you already know this, though through experience...)
Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. A future release of Swing will provide support for long term persistence.
So there seems to be no easy solution (in 1.4 you would use XMLEncoder for persistence with future versions, no possible in 1.3.1). You will probably have to study the serialized code and figure out how to deserialize manually... like find what the header size and format is, how objects' classes and values are labeled etc, then rebuild the object on the receiving end using a datainput stream or something...

ELM Compatibility with different versions of CUCM

Similar Messages

Maybe you are looking for