Elph 330 Continuous Shooting Mode

I decided to finally try out the continuous shooting mode on my Elph 330, but for the life of me I can't figure out what it's supposed to do. From the manual, it sounds like I should be able to hold the shutter button down and the camera will continuously snap pictures, but no matter what I try it just takes a single picture. I'm sure I have the mode set to continuous, and per the manual I don't have any settings on that conflict with continuous shooting. Am I misunderstanding the purpose of the continuous shooting mode? Or is there some other secret that isn't in the manual?
Solved!
Go to Solution.

Yes, that's the intent of continuous shooting; you hold down the button and it takes multiple shots. It's possible that certain shooting modes don't allow continuous shooting. I'd assume it has a sports mode, try that to see if it works.

Similar Messages

Continuous Shooting Mode Setting Download

I use a Nikon D70 and shoot sports events on continuous shooting mode setting. Photos are in correct sequence when viewed on camera. When downloaded, photos are often out of sequence. Any suggestions as to how I might fix this problem? Thanks.

Yes, the problem is the sub-second time. Since the D70 shoots at 3 fps, no wonder some files end up having exactly the same time, up to the second. It's not clear, though, why wouldn't Lightroom use the filename as the second sorting criteria — that would ensure correct order, since cameras are numbering the files sequentially.
You have two options:
Free — just sort by filename. Cameras number the files in the correct order, no matter if the time is the same.
Cheap (99$) — update to Lightroom 2.3. Since v2, Lightroom retrieves the sub-second information from the files, and even if the fractions of seconds are not displayed in the Metadata panel, these are used for sorting. I am not sure all cameras record subsecond information in EXIF, but my own D70 does for sure.
NOTE: If you'll be updating your catalog from v1 to v2, rather than importing the files in a fresh v2 catalog, you'll have to Save, then Read back Metadata for your D70 files, in order to ensure the subsecond information is actually read from files. That's because v1 didn't bother to read this info, so it's not there.

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

How can i get the timestamp of first data at continue sample mode?

how can i get the timestamp of first data at continue sample mode?
6023e pci , and c++ code
thanks !

The tangent ist the derivative of the curve in that point. You can try to use a numerical derivative vi or keep it simple an approximate with a line through the adjacent points.
Gabi
7.1 -- 2013
CLA

How to disable the anti-shake feature on a canon powershot elph 330 hs when taking video?

Hello Canon Users,
I have a question in regards to my Canon Powershot ELPH 330 HS. Most of the time, I use this camera sitting down and talking into it. The Anti-Shake feature is excellent for taking video when moving around, but when sitting down, the following happens. When I move, the background moves a bit making the video very unstable and it looks horrible. Is there a way to disable the anti shake/image stability feature? Any help is much appreciated. Thank you!

See, what happens is, I have my camera on a stable surface (my tripod), Then, when I move, for example moving my hands or my body slightly, the background shakes a little bit. I don't know why, but I'm assuming it has something to do with the stabilization. If I stay perfectly still, the background will not move, and everything will be fine. But even the slightest hand gestures or body movement makes the background shake.

I would like to view the shooting mode used for an image, it does not appear when I click on "info"

How to view shooting mode of an image in iPhoto 2011 library, it's not visable using "info"

It depends on what you mean by shooting mode. There's a lot of info in the Info window but it's often represented by icons. Here's a screenshot comparing the full info window of earlier iPhoto versions with the current version:
You might find what you're looking for in there, or not.
Or you can download the free EXIF Viewer (Mac) - Download, put it in the dock and drag photos from the iPhoto window onto the application in the dock to give you this window:
OT

The shooting speed with the continuous shooting can be affected if I shoot jpeg, raw or raw + jpeg.

Hallo, I am using a Canon EOS 6D. In the specifications it is stated that the speed when doing the continuous shooting is 4.5 fps. I wonder if this speed changes depending on the setting regarding on how I save data on the card (raw, jpeg, raw+jpeg). Or it is ALWAYS 4.5 no matter how I save the data ?
Thanks

My interpretation of the spec is that it specifies how many FPS it can shoot when in good light with a good lens & it doesn't care about the file structure saved. That file goes into the buffer as the camera continues shooting & that becomes the limiting factor on HOW MANY shots you can take before the camera stops firing. A faster card helps a bit but transfer speed is really the limiting factor once the buffer starts to fill. From experience cameras writing to dual cards are slower than if instructed to only write to the CF card.
"A skill is developed through constant practice with a passion to improve, not bought."

My Canon 20D won't continuously shoot and also I can view my pictures after I take them anymore?

My camera has been fussy lately. I can't continuously shoot pictures without turning it off and on. I also can't view what I have taken.
Any advice as to what i should do?

Hi Ark!
Thank you for posting!
When you say you cannot view pictures after you take them, is the LCD not turning on anymore? Even when you press the MENU button?
As for continuous shooting, is the camera freezing up between shots?
If this is a time sensitive-matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannot get continuous shooting to work on new G 16. followed Manual

Solved!
Go to Solution.

Continuos is only allowed in certain shooting modes desiganted by the "O" on page 196 of your manual. What mode are you shooting in, it is not available in Auto etc.

Why doesnt the netflix app have a continuous playing mode? I shouldnt have to select the next episode every 24 minutes.

Why doesnt the netflix app have a continuous playing mode? I shouldnt have to select the next episode every 24 minutes. Even the cheap PS3 Netflix app supports this.

Compared to what?
Does Netflix behave differently on other devices?
Anyhow send feedback to:
http://www.apple.com/feedback/appletv.html

Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?

Hallo! I installed ios 6.0 to my iphone 4s, but the panoramic shooting mode does not appear. Tell me please what is the proplem?

Camera App>Options:

ELPH 330 to wifi

I am trying to connect my ELPH 330 to wifi.but I get the error message "Connection failed" at the last step..

Hi JerryF!
To have a better understanding of your issue, please let everyone know what device you are trying to connect your PowerShot ELPH 330 to (iPhone, iPad, Android phone or tablet, another PowerShot camera, or computer). If you are connecting it to a computer then please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you have . That way, community will be able to assist you with suggestions appropriate for your product.
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team.

N80, How can I get more shooting modes

When i go to shooting mode i just found close-up mode and document text
nothing more ....
and i want to save the setting for the flash can i ??
thanks alot

Create your own.
Save .ait files here:
/Applications/Adobe Illustrator CC 2014/Cool Extras.localized/en_US/Templates/

ELPH 330 HS or the ELPH 340 HS

I am looking for a camera outside my cellphone Looking for something that is midrange in price as well as quality of the pictures and that is where I found the ELPH 330 HS. All thr reviews and video's I have read/watched have been nothing but good responses. So I was going to purchase the 330 HS but saw in March there is the 340 coming out. Spec wise they are different the 340 has more zoom/mega pixels. Doing a side by side comparison here I did notice and don't know if this makes a big difference the 340 has a Digic 4 processor and the 330 has a 5.
I am confused as to which one is better. Part of me says go with the 330 HS.
Help a noob out lol =)

Have you compared the difference? If not check this out http://www.digicamdb.com/compare/canon_powershot-elph-340-hs-vs-canon_powershot-elph-330-hs/
Dave

Yoga 2 pro continually changes mode while case is closed

I love my Yoga 2 Pro but there is one thing I've been unable to figure out: It seems as though the mode (e.g. tent vs. tablet vs. laptop) keeps changing when the case is closed and the computer is moving around.
I'll close the lid which, based on my power settings should put it to sleep (though I guess I have no way of really knowing because the lid is closed), put it in my bag, and as I'm walking around it keeps making the sound that it makes when I explicitly change the mode (e.g. when I fold the keyboard back to go from laptop mode to tablet mode).
This is incredibly annoying - either I have to constantly hear this tone coming from my bag, or I have to stop, get the computer out, log in, shut it down, and lose the state of what I was doing (browser tabs, window position, etc.).
This also makes me worry that the battery is draining while the lid is closed.
Is this a known issue, and is there a fix? Thank you!

I have this exact same problem, and after having my new Yoga 2 11 for only a week, it has become increasingly annoying. Is there anyway to fix this? It's frustrating to have to shut my computer down completely in order to get it not to battery drain or to continue to switch mode. I find that whenever I put it to sleep and close the lid, it powers down for a few seconds but then makes the notification sound - upon opening the lid it says that I am in "Tablet Mode" even though the computer had been compeltely closed. I would really like to fix this, or I may just end up taking the computer back.

Elph 330 Continuous Shooting Mode

Similar Messages

Maybe you are looking for