ELSTER and DEu00DCV-functionality with mySAP ERP 2005

Hello!
I have one question:
- Which scenarios can be used for support ELSTER-method (sales tax reservation) and DEÜV-method (notice to the hospital) in the area of ERP 2005?
Thank you!
Regards
Axel

Hi Axel
Try this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8c10aa90-0201-0010-98a0-f071394bc9ae
Also check this thread.. migh be useful..
Elster 1.0 with XI 3.0 and SAP 4.6B
Cheers..
Vasu
** Reward Points if found useful **

Similar Messages

ELSTER and DEu00DCV-methods within mySAP ERP 2005

Hello!
I have the following questions:
- Which scenarios can be used for support ELSTER-method (sales tax reservation) and DEÜV-method (notice to the hospital) in the area of ERP 2005?
- Has the SAP Business connector still any supports?
- Which support package stack and which kernel version are mandatory for Source Release 4.6?
- What is the procedure to connect Lotus Notes and ERP 2005 (Do we need RFC-connects or RFC/BAPI?)
Can anyone help out or recommend how to proceed?
Thank you!
Regards
Axel

Hi Axel
Try this:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8c10aa90-0201-0010-98a0-f071394bc9ae
Also check this thread.. migh be useful..
Elster 1.0 with XI 3.0 and SAP 4.6B
Cheers..
Vasu
** Reward Points if found useful **

Sap FICO Certification for Financial Accounting with mySAP ERP 2005

Hi,
I would like to write SAP-FICO Certification for Financial Accounting with mySAP ERP 2005
Topic areas:
SAP overview, Financial Accounting Master Data, Document and Posting Control,Special General Ledger Transactions, Document Parking, Substitution and Validation ,Payment Program, Dunning Program, Correspondence, Interest Calculation,Evaluation Options in Reporting ,Closing Operations in Financial Accounting ,Asset Accounting,The New General Ledger,SAP Solution Manager.
If anyone have the Material for above topics, please send me my mail Id: [email protected]
if anyone appeared recently for certification for the same code, please send model questions and answers.
i will be very thankfull to you.
Regards,
Satyaprakash

Hi
I am also writing SAP-FICO Certification for Financial Accounting with mySAP ERP 2005.
Request you to send me whatever the material you have in this regard.
thanking you in advance
Suri

(Management Accounting with mySAP ERP 2005 (ECC 5.0 / ECC 6.0)).

Hi All,
I am planning to write the Certification for SAP_Controlling on coming December 2007. I don't have any material regarding this I would like to request you all please help me out regarding this. If you any one having the material (Management Accounting with mySAP ERP 2005 (ECC 5.0 / ECC 6.0)). Please send to me.
I would be recognize your help in a prepare manner with best values.
My E-MAIL ID: - [email protected] ; [email protected]
Certified people please give your valuable inputs and advoice.
Warm Regards,
Sivakumar Sathiyamoorthy

Hi Jochen,
In all honesty, your two questions are very hard to quantify. Though we keep track of customers who download a software, they are not committed to install it nor do they have to tell us when they have successfully done so. And, trying to predict what customers will do for the next year is like trying to predict your stock's performance. Of course SAP desires for that number to increase!
Regards,
John Ta

SAP Certification Solution Consultant SCM u0096 WM & LE with mySAP ERP 2005

Hi Sap gurus,
I have a quick question. i'm preparing for this exam using SAP Warehouse management functionality and technical configuration (SAP press book). Is this sufficient to successfully crack the exam or is there anything i need to do? Also can anybody please tell me what will be the exam format? quick reply is appreciated and will be rewarded
Thanks
Anusha

Hi Anusha,
SAP press book should be okay,
more you should prepair on the business process and integration question.
Question will be like multiple answers and single answers, means they will give some case check box and some case radio button for question.
you should also know integration of MM,QM, PP,PS BM and so on...
they will be question like can we do this not this is not there for TO,
... can we change the Bin when we confirm, yes which relevant setting we should do?
so on.....
Any ways all the best.
Cheers
Bhima

SCM u0096 Planning & Manufacturing with mySAP ERP 2005 Certification

Dear Guys,
I am planning to appear for the above certification. If any one of you have the soft copy of the SAP material for the exam internal code C_TSCM42_05. Kindly share the same. Thanks a lot for your help.
Thanks,
Shiva.

Hi Anusha,
SAP press book should be okay,
more you should prepair on the business process and integration question.
Question will be like multiple answers and single answers, means they will give some case check box and some case radio button for question.
you should also know integration of MM,QM, PP,PS BM and so on...
they will be question like can we do this not this is not there for TO,
... can we change the Bin when we confirm, yes which relevant setting we should do?
so on.....
Any ways all the best.
Cheers
Bhima

SES in mySAP ERP 2005 - UNKNOWN FUNCTION from TREX_RFC_GET_VERSION_INFO

After configuring the SES (TREXADMIN, RFC Destination and so on) I was able to run the indexing process successfully.
Selecting the TAB Version from the TCODE TREXADMIN I get the Exception: UNKNOWN FUNCTION from the Function Module call TREX_RFC_GET_VERSION_INFO in TREX_EXT_GET_VERSION_INFO.
The exception is not expected and a dump occurs.
Running a search via TREXADMIN (e.g. for LFA1) I'm getting the Exception OTHERS in FM TREX_EXT_SEARCH_DOCUMENTS at line 338 CALL FUNCTION 'TREX_RFC_SEARCH_DOCUMENTS_V3'.
Any idea?
Which TREX version is expected to work with mySAP ERP 2005? I installed all together from the same NW2004s DVDs.
Sergio

Hi Sergio,
Correct, ERP05 is based on NW04s (TREX 7.0).
You don't necessarily need TCODE TREXADMIN.
For running SES you can use TCODE SES_ADMIN.
To test SES you can use Program COM_SE_SEARCH_IIF_TEST
(You can start it using TCODE SE38).
In order to get the exception fixed, could you create a customer message in the Customer Support System (CSS) on the component BC-TRX-API, please.
Best regards,
Uwe

Upgrade batch inputs from 4.6C to mySAP ERP 2005

Hi,
we are planning to upgrade from 4.6C to mySAP ERP 2005 (ECC 6.0). We are using batch input/call transaction in various (interface) programs (primarily in modules SD, MM, CS/SM, FI, CO). I would be grateful for any information that helps to estimate the effort to upgrade our batch input code. In which areas/modules/transactions did you encounter problems with batch inputs? How severe were these problems (one or two fields moved to another screen, or major redesign)? How did you address these problems (change BI or convert code to use BAPI)?
Thank you
Thomas

Hi thomas,
we were working on batch input's and our scenario is something like convertion of bdc's from 4.5b to ECC5. well, it was a long process of upgradation. and coming to the part of BDC's
Q) any information that helps to estimate the effort to upgrade our batch input code.
   we had 300 BDC's to convert from 4.5b to ECC5 and with a ten member team of ABAP experts it took us 30 working days to complete the process.
Q) In which areas/modules/transactions did you encounter problems with batch inputs?
   Mostly, we had problems from FI and something like in Revenue recognition process. The problems comes, when the whole transactions screens changes for the process. at this time we have to write completly a new BDC's. if we have right functional specifications and functional experts, it will be easy to convert BDC's.
Q) How severe were these problems (one or two fields moved to another screen, or major redesign)?
    As i have mentioned, out of 300 almost 25 to 50 were minor changes rest were huge changes. a completely new BDC's. the point here is, we were updating from 4.5b to ECC5. it might not be this scenario for 4.6c to ECC5
Q) How did you address these problems (change BI or convert code to use BAPI)?
   well, this is were we are curently working now. and curently there are 4 scenarios (and may be more in the future) were we have to replace three BDC's which are used for material master creation and make it into one bapi satisfying all the conditions of BDC's. actually, we have to find a BAPI( which i couldn't find) so, i have created a bapi. and tougher part is writing exceptions as we cannot write exceptions as we do in function module.
hope this is relavent to what you have asked.
cheers
ajay

Upgrade from SAP R/3 4.7 to mySAP ERP 2005 : technical changes

Hi All,
I wanted to know what objects(tables,structures,data elements ,ZPrograms,SAP Programs,Roles etc..) in d the entire SAP landscape will bear difference when compared with older version (SAP R/3 4.7).
I would like to know technically which objects will be modified after the system is upgraded.
Need urgent reply,
Answers will be rewarded

Dear Rohan,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh

BPS with mySAP ERP 2004 vs. BPS 3.5

Hi all,
Whats is the context difference between Solution Consultant Financials - Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam and Solution Consultant mySAP ERP Financials Strategic Enterprise Management
CPM & BPS (SEM3.5) certification exam? SAP says that the former exam's BPS section includes :
Comparison of SAP system and SEM-BPS
Data basis for SEM-BPS
Integrated use of SAP system and SEM-BPS
Integrated business planning
Business plans
Planning design and architecture
Locking concept
Layout Builder
Interface between SEM-BPS and BW
Structure and characteristics of planning functions
Variables
Key figure model and account model
Data transfer structures and multi-planning areas
Planning folders
Web Interface Builder
Comparison of planning interfaces
Planning hierarchy in SEM-BPS
Hierarchies and attribute assignment in BW
Characteristic relationships in SEM-BPS
Top-down and bottom-up modeling
Realignment
however the first exam includes:
Focuses on integrating subplans for a business plan, such as planning results, overhead and personnel costs, investments, balance sheets, and liquidity.
Overhead cost planning with primary and secondary costs
Balance sheet planning using financial planning functions
Personnel cost planning
Liquidity planning and cash flow analysis
CPM part of both exams are same, but why there is a difference in BPS part?
I am planning to take Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam, I am wondering what you know about these 2 exams? What topics should I focus on?
Thanks,
Kaan

Hello Kaan,
the SEM 3.5 exam is simply based on an older version. You should take the mySAP ERP 2004 exam (or 2005 once this comes out). The BPS functionality has changed only marginally so it's not really a different, but it's nicer to have a recent certification of course
Regards,
Marc
SAP NetWeaver RIG

MSS Implementation on mySAP ERP 2005 & Portal 7.0

Does anyone know what has happened to the appraisals functionality in MSS BP 1.0 mySAP ERP 2005?
The BP documentation indicates that the Appraisals Overview, Edit Appraisals, Appraisals Inbox & Status Overview functionality has been replaced by the new Appraisals iView with an underlying application to support it.
The new appraisals iView will display appraisals overview data but there seems to be no way of creating, editing or generally interacting with the appraisal documents once they are displayed in the table.
Am I missing something here (i.e. the other iViews have not been fully migrated to Web Dynpro and still require HTMLB) or am I just missing some back end config / implementation steps somewhere in ERP 2005?
Thanks in advance,

Peter,
Did you stick with the Team Viewer (MBO) iview?
I wondered if there was a way to configure the 'Employee Search' iview by linking the HAP_STATUS columns in the OADP config to a BSP service, but there's no documentation on how to start on this.
Roger.

BI 7.0 integration with 4.6C versus BI 7.0 integration with mySAP ERP

Folks -
We have 4.6C and are planning to install 7.0.
Assume additional functionality in mySAP ERP is a non-issue
Assume we are implementing standard modules (FI/CO, SD, MM, PP, etc.) in R/3
Questions -
1/ Are there any significant benefits to going to mySAP ERP first, and then installing 7.0
2/ Can we use the 4.6C with BI 7.0 without much of a hitch
3/ If we first install BI 7.0, and later upgrade to mySAP ERP, will there be significant adjustments to extractor functionality on the R/3 side. And any significant impact (reworks) on the BI side
Thanks very much for any details you can provide.
-abhi

Folks -
We have 4.6C and are planning to install 7.0.
Assume additional functionality in mySAP ERP is a non-issue
Assume we are implementing standard modules (FI/CO, SD, MM, PP, etc.) in R/3
Questions -
1/ Are there any significant benefits to going to mySAP ERP first, and then installing 7.0
2/ Can we use the 4.6C with BI 7.0 without much of a hitch
3/ If we first install BI 7.0, and later upgrade to mySAP ERP, will there be significant adjustments to extractor functionality on the R/3 side. And any significant impact (reworks) on the BI side
Thanks very much for any details you can provide.
-abhi

Installation mySAP ERP 2005 on Linux SuSe 10

Hello,
I tried to install mySAP ERP 2005 on Linux Suse 10 with 8 GB RAM and enough harddisk space (6 x 250 GB) as a central system. But the Installations stops always in the "Import Abap" step with jobs:
running 3 , wating 22 , completed 13, failed 0 , total 38
No errors are written to the logfiles and there is no progress in the installation, so I have to stop it manually.
Can anyone help me?
regards
Andreas

Hi Frank
Can you please let me know how to get the SAP Solution manager Key that we need to type in during the initial installation?
Thanks
Sasi

Configuration guide for ESS/MSS mySAP ERP 2005

Hi
Can you please send me configuration guide for ESS/MSS mySAP ERP 2005.
Thanks in advance
Regards
Gauri

http://service.sap.com/instguides
--> SAP Business Suite Applications
--> SAP ERP
--> mySAP ERP 2005
--> Upgrade
--> Upgrade Documentation - mySAP ERP 2005 SR2
There choose your database and operating system.
If you're looking for functional details check
http://service.sap.com/releasenotes

Need info on PCR's in mySAP ERP 2005

Is it possible for PCR's in mySAP ERP 2005 to directly update SAP after the 2nd level manager approves instead of assigning workflow to HR Administrator?

Yeap - that is actually a pretty common request to have certain or all PCR updates automatically executed!
The development effort for each PCR is basically based on the data that is on the PCR. If you only have a couple of infotype fields to update then it should be rather quick (2-3md). Transfer PCR's cover normally more complex scenarios especially with org. structure changes and pay changes involved. It is important to undertstand that you will most likely have to execute several commits and if errors occur you need to have a strategy on the rollback mechanism. Please also note that PCR's can take quite a long time before they are ready to update the backend. You need to check if any data has changed from the time the manager created the PCR and/or approver approved it to the time it is finally ready to update the backend - and then have a strategy to manage any inconsistencies. Using the application log is a good way to monitor the updates to the backend and to check on errors. If you want full automation triggered by WF then you need to have also a mechanism in place where you can restart the update process in case something goes wrong. Sometimes semi-automatic makes more sense because you can build an interactive FM that tells the HR admin what is happening during execution and it can be restarted anytime!
Hope that helps,
Harald

ELSTER and DEu00DCV-functionality with mySAP ERP 2005

Similar Messages

Maybe you are looking for