Elvismx no device detected & Elvismx hangs and stops working

Hi There,
I bought a Mydaq, it is detected on device manager and  NI Max. However none of the devices from Elvismx is working, once it launches hangs.
I am using windows 7, Home Premium 64 Bits
The NI troubleshoooting utility stops working and gives me and error "Unable to locate labview run time engine"
I have fully reinstalled the software several times
Any ideas?
Thanks,
JoseV

Status Update:
I reinstalled the software suite again, but this time  have done I installed it under clean boot.
After doing this the device manager shows the driver as: USB Flash Firmware Updater
I have seen on:
http://digital.ni.com/public.nsf/allkb/49A8EC95510360F586257B09005B7AB1
"Solution:
This is a known issue with USB cDAQ devices, USB X Series devices, and myDAQ. National Instruments has seen this issue with Renesas, Fresco Logic and ASMedia USB controllers, but other controllers may also be affected. If you are experiencing this problem or a similar problem, first check your USB cable connection to see if it is faulty. Otherwise, it is recommended that you update your USB Host Controller's driver. "
I do have Indeed a ASMedia USB controller: ASMedia XHCI controller
I have also tested the device with a different USB cable as the previous solution implies.
What to do now???, please help

Similar Messages

  • Hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

    hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?, hi , my macbook is sometime gets hang and stop working. what to do ? does it need a anitvirus ?

    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
    2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

  • I just bought my iPad and always freeze every time I have to open my fb notifications and even on youtube always hang and stop working.

    Good morning,is some one can assist me

    I have already tried this but still the same. I have also tried un-pairing my speakers and re-pairing! Still get broken playback at times. This even happens when I am close to the bluetooth receiver.

  • TS3376 I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year one day it said no devices registered and stopped working why???

    I had my iphone set up to be tracked as registered with iCloud and it had been using it for a year today it said no devices registered and stopped working even though i tracked the selected iphone 4 device an hour earlier why did it do this???

    So basically the phone I was tracking was working an hour earlier it had no signal at times when it did pick up a signal it located it easily but an hour later the message came up no devices registered when my friend returned home I Checked the device I was tracking to make sure find my iphone was on but it was off and my friend didnt turn it off so my question is why did it turn itself off???
    Confused?

  • I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

  • Display becomes brigthly and stops working what can I do ?

    Hi,
    I´ve got a problem with my macbook.
    My display becomes brigthly and stops working.
    It happens every two minutes after you work with the macbook.
    If I change the position of the display its working again.
    Do you have any ideas to solve this problem ?
    Thank you so much
    Sabrina

    While it sounds like it may be a hardware issue, perhaps wiring to the screen since the symptoms change when you move the screen, you can try an SMC and PRAM reset to see if that makes a difference (and they won't hurt anything):
    SMC: http://support.apple.com/kb/ht3964
    PRAM: http://support.apple.com/kb/ht1379
    You can also run the Apple hardware test to see if it spots any obvious hardware issues (although if it's a wiring problem, it may not pick that up). See http://support.apple.com/kb/ht1509

  • Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase

    HP Deskjet 4180
    Genuine HP Tri-Color #22 ink cartridge and Black #21 ink cartridge
    Windows 7
    Test printing from Photoshop, Windows Picture Viewer and GIMP.
    Some colors in the HP tri-color cartridges dry up and stop working only a few weeks after purchase.
    The experience that I'm having currently contradicts very good, accurate color from HP cartridges in the past from RGB images that I've printed successfully with this printer.  I've previously got excellent color from the true HP ink cartridges on this Deskjet 4180 printer.
    But today it is obvious that the yellow is not flowing from this cartridge that was installed only a few weeks ago.  And my ink levels are at 50 percent, and they were even higher when I started today... see the screenshots below.
    I'm printing from Photoshop, but for some tests I tried printing from two other applications today but I'm always getting these results that indicate that there is no yellow printing... this is much worse than just a bad color profile.  I'm an experienced photo retoucher and I have a long history of dealing with inkjet printing in the work place with all kinds of printers.
    I know that inks can dry up in their cartridges if they don't get printed with every few weeks and if the printer isn't maintained.  I purchased these new cartridges only about three weeks ago and the first test prints and some prints two weeks ago came out perfect.
    But today this is the result I'm getting... screenshots below show the original RGB image and an actual scan of the bad print results I'm getting, indicating that no yellow is flowing from the HP tri-color cartridge.  And a screenshot of the ink level indicator panel is at the bottom.
    Why is the yellow ink drying up and not flowing so quickly?  How can I prevent this besides doing semi-weekly prints to keep the inks from drying up?  I'm in a fairly humid climat, so dry air is not the problem.  The contact points on the cartridge are clean.
    Does HP guarantee their cartridges for this kind of thing?
    Good color - original RGB image...
    Bad color - actual scan of bad print with no yellow, below...
    Ink levels after test printing...
    Thanks for any help.
    digi

    Well, here is the answer I was looking for, only arrived at by way of my own further investigation and experimentation.
    It seems that no matter who I asked about this problem, I always got the same questions and answers.
    For example, the people at the HP 800 number for consumer help, where it seemed I was not talking to someone who was actually familiar with the product, because they came to the conclusion that I need to buy a new HP printer... wow, isn't that a big surprise for an HP employee to say, "Just buy a new one!".
    No one, and I mean no one, would seem to be able to listen to or understand what I wrote in my original question on this thread about how this printer prints fine when I first put in a new ink cartridge, and then just a few weeks later one or two of the colors seem to be dried up and they won't print.
    And it seems that somewhere I read that you need to print a test maintenance print every month or so to keep the inks from drying up... but the inks seem to be drying up in less than three weeks now, even though I used to be able to go for months without doing a print and the inks would still be fine.
    So when I was talking to someone in India, Malaysia or the Philippines at the HP 800 customer phone support number, after going through so much crap about whether this printer was still in warranty just to have a simple question answered you'd think I was trying to launch nuclear missiles and my launch codes weren't current.
    And it was much the same situation to get on HP's "Live Chat" customer service on the net, and then they'd go through the same line of questions and answers as the support people on the HP 800 phone line...
    Q: "Do you have dirty nozzles on your ink cartridges?"
    A: "No, like I said in my original statement, I cleaned those and they weren't dirty to begin with."
    Response: "Because you need to clean those every so often, you know."
    Q: "Did you try cleaning the contacts on the cartridges?"
    A: "Yes, like I said in my original statement, I already did that."
    Response: "Because you need to clean those contacts every so often, you know."
    Q: "Did you try putting in a new cartridge?"
    A: "Yes, like I said in my original statement, this cartridge is nearly new and it shows a 90% ink level."
    Response: "Because you need to put in new cartridges when the ink runs out, you know."
    Q: "Did you do a test print?"
    A: "Yes, like I said in my original statement, I did a test print and that's what is telling me that the yellow and magenta are not printing any longer."
    Response: "Because that's how you can tell if any colors aren't printing, you know."
    So is anyone else seeing a pattern here?  It's not like I'm talking or live chatting with a real human being, but maybe an automated voice prompt system that only has an A, B, C   or   1, 2, 3   type of response system that it's working from. 
    The people hear a answer, and regardless of what that question was in the troubleshooting category that they are in, they just have a stock response that seems to bypass what the customer's answer was, so it's like I'm talking or live chatting with a machine that is uttering its responses in a fixed pattern, regardless of what I'm saying.
    HP customer service is like talking to someone who isn't listening, so often they ask their next question, but I just answered that question with my previous answer.
    Like I said, the way it used to be, HP or even after market ink cartridges could sit for months without doing a maintenance print and I would still get a perfect print every time.  And that's pretty typical for maybe an older person who isn't printing prints that often, but they just want to print one every few months or so, like my mom, with her HP printer, who I've been troubleshooting this problem for.
    Or even with my own large format Epson printer or any of the pro level inkjet printers and even IRIS printers that I've used in the workplace over the course of the last 20 years... you could do a print every two months and there was no problem with dried up inks.
    And I know somewhere in the past  I read that the maintenance print that the instructions was recommending be printed only needed to be done every 4 to 6 weeks to keep the inks from drying up, although when I go through the entire full blown PDF instruction manual now I can't find ANYTHING about how often a maintenance print needs to be done... that's right, nothing!
    But on Christmas eve I once again exchanged my last, dried up HP tri-color ink cartridge at a Walgreens store where my mom had purchased it months prior (and the guy was nice enough to exchange it even after 5 months)  which was yet another HP tri-color ink cartridge that had at least two of it's colors dry up after only a few weeks.  At that Walgreens they had been nice enough to replace three prior HP tri-color ink cartridges with the same problem in the last year, and before that three different after market, off brand tri-color ink cartridges from another store had dried up after only a few weeks.
    So the guy at Walgreens told me that now  with HP cartridges you need to do a maintenance test print EVERY WEEK in order to keep the inks from drying up... THAT'S EVERY WEEK YOU ARE NOW SUPPOSED TO DO A TEST PRINT FOR MAINTENANCE.
    Now, you DO NOT need to do one of the test prints where it prints a photo of a pear, which uses quite a bit of ink, but you can just do one of the self test prints where you hold down on the CANCEL button and then press the COLOR COPY button and it prints a quick test page with just a little color and a lot of B&W text, and that's apparently enough.
    And that seems to be enough to keep the ink cartridges from drying up, the way they seem to be otherwise doing so quickly now, as opposed to how HP and other brand ink cartridges used to.
    And in fact, now after about a month, after doing weekly self test prints, the ink cartridges are still flowing well and they just did some full color prints quite nicely... ALERT THE MEDIA AND ANYONE WHO CONSIDERS THEMSELVES HP PRINTING EXPERTS!
    So the questions I would ask myself are these...
    First, why is it that NO ONE at HP customer service knew this, whether it be on the HP 800 phone support or on the HP "Live Chat" with people in India, Malaysia and the Philippines, or even here on the HP Help Forum with so-called EXPERTS from HP?
    Second, how have the inks changed so that in the past, you didn't need to do maintenance prints every week, but maybe every two months at the most, in order to keep the inks from drying up, but now the inks dry up in a matter of less than two weeks unless a maintenance print is done once a week?
    Have HP and other ink makers changed the formula of their inks so they dry up much faster, forcing people to buy new cartridges when the last ink cartridge is still at a 90% level with dried up ink?
    And as a result, are people on the HP 800 customer phone support line and on HP "Live Chat" telling people that they need to buy a new printer, when in actuallity their ink cartridges are just drying up within a new record short period of time?
    You tell me, HP experts.

  • Acrobat X crashes and stops working about every 4 weeks. I have to uninstall and reinstall the program in order to open pdf files. Can this be fixed?

    Acrobat X crashes and stops working about every 4 weeks. I have to uninstall and reinstall the program in order to open pdf files. Can this be fixed?

    Turn off the updater.
    Mylenium

  • TS4268 I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

    I still have "Waiting for Activation" while trying to activate iMessage on the iphone, noting that it was working normally and stopped working suddenly, as well I had done all the mentioned steps.. what should I do else?

    Define "mentioned steps." 
    See this:
    iOS: Troubleshooting FaceTime and iMessage activation

  • My computer freezes and stops working I NEED HELP FAST I bought it 3 days ago from BestBuy brand new

    my computer i bought 3 days ago from BestBuy brand new in the box freezes and stops working or not responding and lags all the time and i always have to push the power button on the computer for me to restart it because i cant do anything on my computer i cant use ctrl + alt + del or click on anything and i spent $965 on my HP Pavilion HPE Series h8-1224 computer with 10GB ram and 2TB HDD and 1024MB Video memory with windows 7 home premium 64bit...I need help on how to stop my computer from freezing up or lagging or not responding all the time because i dont know what program i installed last before it happened or what i did wrong i dont know i just want my pc running perfect forever 

    I did the First step and reinstalled everything and then its starting to happen again everytime i right click on the desktop or type anything or do anything on my desktop it freezes up or lags or the whole intire scrren goes away and all i see is my wallpaper on my computer and i try press Ctrl + Alt + Del it takes long then it says could not start Ctrl + Alt + Del and i try pressing Ctrl + Shift + Esc for task manager it that doesnt come up man i had it for 10 days now **bleep** is wrong with this new desktop cuz i had another HP desktop for 6 years then it died on me but this computer only 10 days and im already having problems what els can i do i already restored my pc and it formated my 2TB hard drive this gotta stop man its pissing me off i cant do anything

  • Every time i double clicked the group to do some editting, it crashed and stopped working. win8 and cs6. why!!

    every time i double clicked the group to do some editting, it crashed and stopped working. win8 and cs6. why!!

    What happens if you turn off the preference double click to isolate.

  • Why my creative cloud icon disappear and stopped working when downloading software?

      Why my creative cloud icon disappear and stopped working when downloading software?

    You can try this step :
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    https://forums.adobe.com/message/5484303#5484303#5484303
    Regards
    Rajshree

  • IPod seemed to freeze and stop working

    I got ipod 30G, my iPod seemed to freeze and stop working when i play it for a few songs. I need to restar or restore to get my ipod back to normal. anyone know what cause this problem?

    If you have to go through either a reset or restore frequently, then it's best that you send it for service.
    http://depot.info.apple.com/ipod/

  • I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

    I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

    You're not asking any question so I'll just ramble.
    You may have permanently damaged your iPad.  The iPad controls the current coming from the charger but the charger electronics must be capable of responding to the iPad.  Charge with a known good charger and then test your iPad.  If it's OK, you lucked out.  Otherwise...  If the charger was not an Apple charger, you're completely out of luck.  If it was an Apple charger, call Apple and discuss the issue with them.

  • Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

Maybe you are looking for