EM Application Log and Web Access Log growing too large on Redwood Server

Hi,
We have a storage space issue on our Redwood SAP CPS Orcale servers and have found that the two log files above are the main culprits for this. These files are continually updated and I need to know what these are and if they can be purged or reduced down in size.
They have been in existence since the system has been installed and I have tried to access them but they are too large. I have also tried taking the cluster group offline to see if the file stops being updated but the file continues to be updated.
Please could anyone shed any light on this and what can be done to resolve it?
Thanks in advance for any help.
Jason

Hi David,
The file names are:
em-application.log and web access.log
The File path is:
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_brsapprdbmp01.britvic.BSDDRINKS.NET_SAPCPSPR\log
Redwood/CPS version is 6.0.2.7
Thanks for your help.
Kind Regards,
Jason

Similar Messages

Is it possible to clean up the http-web-access.log?

The size of the file http-web-access.log has increase drastically and I've just started facing disk full problems on my Server. We have are using Oracle 10g. I was wondering if someone could give me any advice how I can cleanup this file.
Thank you in adavnce.
Edited by: user8378419 on Apr 24, 2009 10:01 AM

Thank you for your reply. According to the defrag report it is an Oracle product - likely the OEM as we do use Enterprise Manager on a daily basis.
Fragments File Size Most fragmented files
3,630 600 MB \oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_wyocama01_ATSRV\log\http-web-access.log
Thanks again for any guidance regarding this.

Default-web-access.log

hi all,
first i am sorry to post here but i am confuse i have application server 10g on unix 5.10 and my database is 10g.2
my application server is only tier without infra ,now all user who access the database take more time to call the forms
i serach i found there is file called default-web-access.log the size of that file 11g under oracle_home\j2ee\oc4j-bi-forms\log\oc4j-bi-forms-default_island-1
can i delete this file ????advice please

If the size increases more than 1GB then this component automatically goes down.Uuuhhh ?!?! Is your OS correctly configured ?$ ls -l default-web-access.log
-rw-r--r-- 1 oracle dba 4085018342 Dec 12 10:04 default-web-access.log
$ opmnctl status
Processes in Instance: oracleas1.jtime1
-------------------+--------------------+---------+---------
ias-component      | process-type       |     pid | status
-------------------+--------------------+---------+---------
DSA                | DSA                |     N/A | Down
LogLoader          | logloaderd         |     N/A | Down
HTTP_Server        | HTTP_Server        |    7811 | Alive
dcm-daemon         | dcm-daemon         |    8991 | Alive
WebCache           | WebCache           |    7839 | Alive
WebCache           | WebCacheAdmin      |    7812 | Alive
OC4J               | home               |    7814 | Alive
OC4J               | OC4J_BI_Forms      |    7817 | Alive
OC4J               | wsjtime            |    7821 | Alive
$

Rotating the default-web-access.log log

Can the default-web-access.log file be rotated with ODL?

Yes, at least since on 10g Release 2 (10.1.2) , see the <odl-access-log> secction on:
Oracle® Application Server Containers for J2EE User's Guide
10g Release 2 (10.1.2) - 3 Advanced Configuration and Development
http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14011/advanced.htm
Bruno Antunes,
Java Software Engineer

Routing and Remote Access Logs (Windows Server 2008 R2)

Hi,
I have a Windows 2008 R2 server running Routing and Remote access and users are using PPTP VPN's to connect to our network.
I have been asked to find logs for the following for connections in to our server
Username used for connection
Computer Name
IP Address used by computer connecting
Start/End time of VPN session
Date
Encryption used
I found an article stating to enable RRAS logs you need to run the following command
To enable RAS logs run command “netsh ras set tracing * enabled” and found a series of logs created in this location C:\Windows\tracing
None appear to contain the information I am looking for and was wondering if I was doing this correctly and if not how I am meant to extract this information?
If you require any more details just let me know.
Kind Regards
David

Hi,
I can’t sure which article you have read, but fur the 2008R2 the RAS to enable the log and the debug log in the KB is descried like this, I recommend you to try the KB
mentioned method.
To configure RRAS to enable logging
1. Start Server Manager. Click Start, click Administrative Tools, and then click Server Manager.
2. In the navigation tree, expand Roles, and then expand Network Policy and Access Services.
3. Right-click Routing and Remote Access, and then click Properties.
4. On the Logging tab, select Log errors only, Log errors and warnings, or Log all events, depending on how much information you want to capture.
5. Click OK to save your changes.
The related KB:
RRAS: Logging should be enabled on the RRAS server
http://technet.microsoft.com/zh-cn/library/ee922651(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Publish RD Gateway and Web Access with One-Time Password (OTP) / Two-factor Authentication WITHOUT ISA/TMG server

Hi everybody,
I've been struggeling with this problem for a few weeks now and can't find a way to solve it.
We have an RD farm (Server 2012) which consists of two Remote Desktop Servers with Connection Broker and Web Access.
I've recently published a new server, containing RD Gateway and Web Access in our perimeter network.
Now we've got restrictions that OTP/2FA must be used for the external deployment and we've decided to go for a solution from Gemalto.
The "program" is called IDConfim and the server is called SA Server (Strong Authentication).
Also it's important that NO ISA/TMG server is supposed to be used, the OTP/2FA is supposed to work seamless with the Web Access/Gateway.
After hours discuss we came to a point were their NPS agent setup would be the only way to accomplish our goals.
The setup is supposed to be like this:
LAN:
1 DC (2008 R2)
RD Farm (2012)
1 SA Server (2012)
DMZ:
RD Gateway/Web Access (2012)
Were Gateway and Web Access should forward the authentications with NPS to the NPS agent on the SA server.
When you print your AD account to authenticate you add the 6 digits of OTP which you recieve from you mobile app.
Initially this seems to work, the Gateway forwards the request to the remote NPS server, BUT only if you write the correct AD password
(without the OTP extension).
If you write the correct AD password the authentication is forwarded to out SA Servern and it's beeing rejeced because the password doesn't
contain the correct OTP extension.
The problem comes here.
When you write you AD password along with the OTP extension you get a Windows Security error in the eventlog (On thw Gateway server) like this:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: user
Account Domain: domain
Failure Information:
Failure Reason: Unknown username or password.
Status: 0xc000006d
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: server
Source Network Address: 192.168.x.x
Source Port: 63003
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What i can see it's a NTLM error, but hey?! aren't we supposed to forward all authentication handeling to the remote NPS server?
The problem is that no matter what i try the above problem stays there.
Is it not possible to just forward ALL authentication handeling to a remote server?
The only solution I've found to get it working someday in the future is this:
"Remote Desktop Pluggable Authentication and Authorization", which is supposed to be introduced in 2012 R2.
Also this link describes it:
http://archive.msdn.microsoft.com/Release/ProjectReleases.aspx?ProjectName=rdsdev&ReleaseId=3745
Please, bring me some answers before my head explodes! :)
PS, long question = maybe some errors, ask me if something is unclear.

Hi,
Based on our experience, if the NTLM error occurs, please check the password.
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Pros and Cons between BEx client and Web access

Dear all,
I am quite new to BI 7.0 and have some question about frontend tools.
I am looking for a comparison material describing pros and cons of BEx client application and Web access in BI 7.0.
There are many tools in BEx suite and I am a bit confused about what fuctionality each tool has or what to consider to choose the right tool.
Thanks a lot in advance and appreciate any input.
Regards,
Kazuya

Hello,
Shortly speaking there are 4 tools and you need at least 2 of them:
1. Query Designer: you need it always as this is a tool for defining queries
2. Web Application Designer: you need it if you want create web reports
3. Report Designer: only if you want create formatted reports in web
4. BEx Analyzer: if you want to run queries in Excel (Analyzer is an add-in)
Help on BEx:
[http://help.sap.com/saphelp_nw70/helpdata/en/b2/e50138fede083de10000009b38f8cf/frameset.htm]
-> BI Suite: Business Explorer
Regards, Karol

The file structure online redo log, archived redo log and standby redo log

I have read some Oracle documentation for file structure and settings in Data Guard environment. But I still have some doubts. What is the best file structure or settings in Oracle 10.2.0.4 on UNIX for a data guard environment with 4 primary databases and 4 physical standby databases. Based on Oracle documents, there are 3 redo logs. They are: online redo logs, archived redo logs and standby redo logs. The basic settings are:
1. Online redo logs --- This redo log must be on Primary database and logical standby database. But it is not necessary to be on physical standby database because physical standby is not open. It doesn't generate redo log. However, if don't set up online redo log on physical standby, when primary failover and switch standby as primary. How can standby perform without online redo logs? In my standby databases, online redo logs have been set up.
2. Archived redo logs --- It is obviously that primary database, logical and physical standby database all need to have this log file being set up. Primary use it to archive log files and ship to standby. Standby use it to receive data from archived log and apply to database.
3. Standby redo logs --- In the document, it says A standby redo log is similar to an online redo log, except that a standby redo log is used to store redo data received from another database. A standby redo log is required if you want to implement: The maximum protection and maximum availability levels of data protection and Real-time apply as well as Cascaded destinations. So it seems that this standby redo log only should be set up on standby database, not on primary database. Am my understanding correct? Because I review current redo log settings on my environment, I have found that Standby redo log directory and files have been set up on both primary and standby databases. I would like to get more information and education from experts. What is the best setting or structure on primary and standby database?

FZheng:
Thanks for your input. It is clear that we need 3 type of redo logs on both databases. You answer my question.
But I have another one. In oracle ducument, it says If you have configured a standby redo log on one or more standby databases in the configuration, ensure the size of the current standby redo log file on each standby database exactly matches the size of the current online redo log file on the primary database. It says: At log switch time, if there are no available standby redo log files that match the size of the new current online redo log file on the primary database. The primary database will shut down
My current one data gurard envirnment setting is: On primary DB, online redo log group size is 512M and standby redo log group size is 500M. On the standby DB, online redo log group size is 500M and standby redo log group size is 750M.
This was setup by someone I don't know. Is this setting OK? or I should change Standby Redo Log on standby DB to 512M to exactly meatch with redo log size on primary?
Edited by: 853153 on Jun 22, 2011 9:42 AM

Log and capture or Log and transfer?

I'm a newbie to FCP, I've been working at it and researching, so I have a basic understanding, been able to do some good stuff, now I'm looking to find more time-economical ways to do things. I'm a football coach, looking to cut up game films into individual plays (1 play per clip), and ideally being able to name each clip by it's play name "Trap" or "Pop Pass" for example. It looks like I need to get into logging if possible. My workflow at present when dealing with an opponent's film is to take a DVD, and get it onto my computer using MPEG Streamclip. I've been using DVC-PAL as a codec at someone's suggestion, I can't rmemeber where I got that. Is this a mistake? Anyhow, I now import that movie file into FCP using File>Import. At this point I can't do any logging though, if I try Log and Capture or Log and Transfer I get "Unable to initialize video deck", though it tells me I can still use Capture Now. Once it opens the Log and Capture window, I get "Error: this operation requires a controllable deck." and directs me to the Audio/Video Settings. Here's where I'm pretty much lost. Do I try to adjust settings from here? If so, to what? Do I need to start by changing my MPEG Streamclip settings and then trying to match those up in my FCP Audio/Video Settings? Or do I need to completely overhaul the way I'm approaching this? ARGH! I've been impressed with myself getting to this point, any help from here would be greatly appreciated, thanks all!
Grouch

Log and Capture is used if you are capturing footage from tape based formats. DV, HDV, HDCAM...others.
Log and Transfer is for tapeless camera systems. P2, XDCAM, Canon DSLR, AVCHD.
If your footage comes from DVDs...and you convert the footage to QT files...then you simply go to FILE>IMPORT. You don't log with this method. Just import and work with the footage.

Difference between BLOCK DATA and WEB ACCESS BLOCK?

Currently my account shows I have both BLOCK DATA and WEB ACCESS BLOCK in place. I did this a couple of years to prevent data charges. Works perfectly. Now I'm trying to upgrade one of my lines to a Kin Onem because of the WiFi option and when I add the phone to my shopping cart and go to the Select Features & Services Page I see a message at the bottom that says: Features We Needed To Remove (Because they're incompatible with your phones or plan) - Block Web Access.
It looks like I don't have a choice when ordering the phone, but what exactly will removing the Web Access block do? Maybe I have to turn it off anyway to use the WiFi anyway right? I just don't want to incur any data charges.
Someone please help. Thank you!

"Data block" actually blocks your phone's ability to connect to the 3g data network. What this means is your phone can't create an internet connection on a cellular network. Web Access block specifically blocks the browser/mobile web on your phone from making a connection. Unblocking mobile web will not cause your phone to be able to connect to the cellular data network (resulting in 1.99/mb charges), but will allow the browser on the kin to connect while you're using wifi.

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple

I BOUGHT an application from my iphone Application icon and paid 2.99 dollars too, for phone tracker , downloaded sucessfully and its working too but not tracking the phones as mentioned in the description can any one support me??? better from apple!!

Is this the app you're referring to?
http://itunes.apple.com/us/app/phone-tracker/id348537489?mt=8
As you'll note it's made by Presselite and that page has a link to their support.
Also, you'll find it best not to post questions about iPhone apps in the AppleWorks forum. Best to contact the makers of the app.
Regards
TD

GW2012 Web Access Logging

GW2012SP1
GW2012SP2
SLES11SP3
SLES10SP3
We have two GW Web Access Linux servers. Neither one creates the log files
on startup. The WEBACC.CFG both have the path to the log file folder as
$(webapp.config.path)\logs. With the GW2012 Web Access installed and running
on a MS Windows 2K12 server the logs are created. I know, run MS....however
that is not an option. Linux is preferred.
What, if anything are we missing?
Any assistance is greatly appreciated.
JoeK

No the WebAccess Admin console shows no log files being created.
"kjhurni" <[email protected]> wrote in message
news:[email protected]...
>
> JKress;2329321 Wrote:
>> NORMAL
>>
>> "kjhurni" <[email protected]> wrote in message
>> news:[email protected]...
>> >
>> > JKress;2329051 Wrote:
>> >> Thanks for the responses, however the path is correct. The users and
>> >> temp
>> >> folders in the same path populate if the permissions are correct for
>> >> them. I
>> >> made the permissions the same on the logs folder, however no logs.
>> >>
>> >> Any other thoughts please?
>> >>
>> >> JoeK
>> >>
>> >> "kjhurni" <[email protected]> wrote in message
>> >> news:[email protected]...
>> >> >
>> >> > JKress;2328872 Wrote:
>> >> >> GW2012SP1
>> >> >> GW2012SP2
>> >> >> SLES11SP3
>> >> >> SLES10SP3
>> >> >>
>> >> >> We have two GW Web Access Linux servers. Neither one creates the
>> log
>> >> >> files
>> >> >> on startup. The WEBACC.CFG both have the path to the log file
>> folder
>> >> as
>> >> >> $(webapp.config.path)\logs. With the GW2012 Web Access installed
>> and
>> >> >> running
>> >> >> on a MS Windows 2K12 server the logs are created. I know, run
>> >> >> MS....however
>> >> >> that is not an option. Linux is preferred.
>> >> >>
>> >> >> What, if anything are we missing?
>> >> >>
>> >> >> Any assistance is greatly appreciated.
>> >> >>
>> >> >> JoeK
>> >> >
>> >> > Granted, mine is on OES2, but the webacc.cfg shows:
>> >> > Log.path=$(Webapp.Config.path)\logs
>> >> >
>> >> > It places the logs in the:
>> >> > /var/opt/novell/groupwise/webaccess/logs
>> >> > directory
>> >> >
>> >> > Does that help?
>> >> >
>> >> > --Kevin
>> >> >
>> >> >
>> >> > --
>> >> > The opinions expressed are my own.
>> >> > Check out my OES2 Guides:
>> >> > Installing OES2 SP2:
>> >> >
>> >>
>> http://www.novell.com/communities/no...allation-guide
>> >> > Upgrading to OES2 with ID Transfer:
>> >> >
>> >>
>> http://www.novell.com/communities/no...r-id-scenarios
>> >> > GroupWise Migration with OES2 ID Transfer:
>> >> >
>> >>
>> http://www.novell.com/communities/no...p2-transfer-id
>> >> >
>> >>
>> ------------------------------------------------------------------------
>> >> > kjhurni's Profile: https://forums.novell.com/member.php?userid=734
>> >> > View this thread:
>> https://forums.novell.com/showthread.php?t=478720
>> >> >
>> >
>> > This is going to sound dumb, but what's the log level set to in the
>> > webacc.cfg file?
>> > --Kevin
>> >
>> >
>> > --
>> > The opinions expressed are my own.
>> > Check out my OES2 Guides:
>> > Installing OES2 SP2:
>> >
>> http://www.novell.com/communities/no...allation-guide
>> > Upgrading to OES2 with ID Transfer:
>> >
>> http://www.novell.com/communities/no...r-id-scenarios
>> > GroupWise Migration with OES2 ID Transfer:
>> >
>> http://www.novell.com/communities/no...p2-transfer-id
>> >
>> ------------------------------------------------------------------------
>> > kjhurni's Profile: https://forums.novell.com/member.php?userid=734
>> > View this thread: https://forums.novell.com/showthread.php?t=478720
>> >
>
> Do you have the webconsole enabled (ie: like
> http://servername/gw/webacc?action=Admin.Open)?
>
> If so, does it show any log files being written?
>
> If it does, then we can use the Linux Find command to see where it's
> storing them.
>
> --Kevin
>
>
> --
> The opinions expressed are my own.
> Check out my OES2 Guides:
> Installing OES2 SP2:
> http://www.novell.com/communities/no...allation-guide
> Upgrading to OES2 with ID Transfer:
> http://www.novell.com/communities/no...r-id-scenarios
> GroupWise Migration with OES2 ID Transfer:
> http://www.novell.com/communities/no...p2-transfer-id
> ------------------------------------------------------------------------
> kjhurni's Profile: https://forums.novell.com/member.php?userid=734
> View this thread: https://forums.novell.com/showthread.php?t=478720
>

Routing and remote access logging to SQL server

Hi!
I am in the process of trying to set up SQL logging from routing and remote access on a windows server 2003 to another windows server 2003 which is running microsoft SQL server 2005.
What i did was i created a database named RRAS in the sql server and in routing and remote access i went under remote access logging and configured it, when i press "test connection" it says its successful. and when i check the local logfile i successfully
configured i can see my connection attempts towards the RRAS. but in the sql database there's nothing, no tables or anything.
I am sure i have the right permissions going on since i have only been using one account for everything so far(created the rras and the sql database), the SQL server is operational(it has a myriad of other databases that are used on a dailybasis).
So i am wondering what component is missing? do i need to create the tables manually, is there a guide that tells me how to do that?

Hi Plindgren,
Thanks for posting here.
May in know which fields we’ve created for this table ?
Please take look the link below and recheck the database settings:
Key concepts for IAS SQL Server logging
http://technet.microsoft.com/en-us/library/cc778830(WS.10).aspx
For more information please also refer to the link below:
Deploying SQL Server Logging with Windows Server 2003 Internet Authentication Service (IAS)
http://technet.microsoft.com/en-us/library/cc776712(WS.10).aspx
Thanks.
Tiger Li
Tiger Li
TechNet Community Support

Http-web-access.log en Jdev 1013

Hi:
In Jdev 1012 exist "jdev1012\jdev\system10.1.2.0.0.1811\oc4j-config\log", here appear HTTP 404 logs. But in Jdev 1013 don't exist this directory and I need view this logs.
Can you help me?

Hi John:
In this directory only apper global-application.log, rmi.log, server.log and system-application.log and two directories with *xml. You know if I need any configuration in the IDE.
Thanks you :)

RDS 2012 Connection Broker and Web Access in different domains

Hello!
I'm trying to add Web Access (WA) server to RDS 2012 Deployment. WA server and other servers in Deployment are in different domains (in different forests with 2-way forest trust).
WA server was added to Deployment
successfully without any warnings.
We have many applications published but in this new WA server there are no application icons in Rdweb page at all.
There is nothing interesting in logs on WA server as well as on Connection broker servers.
Is this design
acceptable? Which additional actions are needed to make application icons visible?

Hi,
Please refer below links and cross verify the Web Acess server settings.
http://blog.kristinlgriffin.com/2010/03/rd-web-access-is-emply.html
http://social.technet.microsoft.com/wiki/contents/articles/5974.the-case-of-invisible-remoteapp-programs-a-k-a-no-remoteapp-programs-listed-on-rd-web-access-site.aspx
Regards,
Manjunath Sullad

EM Application Log and Web Access Log growing too large on Redwood Server

Similar Messages

Maybe you are looking for