EM Daemon is not running.

Today when I started my laptop (XP SP2 with Oracle 10gR2, used as stand alone just for practice) I tried as usual to start the listener and called the EM DB console. I do this operation everyday and today I noticed from the console that everything was down, listener and connection to instance. This never happened so I started thinking of what I might have changed last time and the only operation I did was creating 2 directory objects 1 for data dumps and one for the relative logs from the command output. I used expdp from command line to export a table and this worked fine. Nothing else.
Today not only the console is not working but sqlplus gives as output:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
What I found is that when running
emctl status dbconsole
the output says : EM Daemon is not running.
I checked the windows services and all needed processes seemed to be running.
Despite I tried to restart the DBconsole process nothing changed.
Then restarted the OracleService<SID> process and checked again with
emctl status dbconsole.
Again it goes "EM Daemon is not running". But if I try to restart it tells me that the agent is already running.
I thought nothing had been fixed, instead surprisingly everything was now working fine, console and sqlplus.
Any idea of what might have happened? And ... is it regular that I still see the message EM Daemon is not running even if everything seems to be up and running ?
I then restarted my laptop and had exactly same experience - nothing was up despite the OracleService<SID> process was started in the services panel as well as the listener and the dbconsole agent.
Again, the situation was fixed by restarting the OracleService<SID> process although the output of emctl status dbconsole shows "EM Daemon is not running ".
This has happened overnight, and as said the only operations I did were those 2 basic creations of directories objects and dump of a user table. Until yesterday I never needed to manually restart the OracleService<SID> process.
Please let me know if you would like to see any logs or have the precise commands I ran.
Thanks,
Enrico

Thanks Madrid - it is weird because my laptop is isolated on may desk, and does not connect to any network since one month back. I have always been working with the loopback adapter that I configured months back following the indication on the Oracle site. So I configured it with 192.168.5.5 and always called the em console via my hostname and port, and the hostname is locally mapped to the above IP in the hosts file.
Coming to your advise, I noticed that EM configured with my localhost as the host name. In example, in the homepage the listener looks like LISTENER_"pasticci-116b1b" being "pasticci-116b1b" my hostname.
But above all - what I can't understand is what happened between yesterday and today to have triggered this kind of problems, since before shutting down yesterday I only did those apparently harmless operations...
Enrico

Similar Messages

  • "CiscoWorks Daemon Manager" not running

    Hi Team,
    We had to restart the server in which we have installed Ciscoworks LMS. After that "CiscoWorks Daemon Manager" service is not getting started. Tried to stop all the ciscoworks related services and restart it, also tried restarting the server machine, but no luck. Could any one give me the solution to fix this problem. The error message is attached below.
    I am using Ciscoworks LMS Version 3.0
    E:\>net start crmdmgtd
    The CiscoWorks Daemon Manager service is starting.
    The CiscoWorks Daemon Manager service could not be started.
    The service did not report an error.
    More help is available by typing NET HELPMSG 3534.
    E:\>
    E:\>pdshow
    ERROR: connect to dmgtd process on "127.0.0.1" on port 42340 failed:
    Error Line found in License.log file
    [ Thu Apr 09 13:10:46 IST 2009 ] [VBJ ThreadPool Worker id=25 se=iiop_tp scm=iiop_tp] ERROR com.cisco.nm.license.client.LicenseManager - Error in response: Unknown license handler: AALL
    Please do let know if I need to provide any further info.

    Below is the last two lines from NMSROOT\log\syslog.log. These lines are repeated many times in the log file.
    Apr 09 15:35:20 127.0.0.1 100: <28> dmgt[4916]: 2507(W):Daemon manager anonymous user has not been set up: 00000532
    Apr 09 15:38:01 127.0.0.1 100: <28> dmgt[5672]: 2507(W):Daemon manager anonymous user has not been set up: 00000532
    These are the only Error messages I can see in Windows Event Viewer for todays date.
    Error 1.
    Source: PerfNet
    Unable to read performance data from the Server service. No Server performance data will be returned in this sample. The error code returned is in first DWORD in the Data section. The IOSB.Status is in the second DWORD and the IOSB.Information is the third DWORD.
    Error 2.
    Source: Apache Service
    The Apache service named e:\PROGRA~1\CSCOpx\MDC\Apache\Apache.exe reported the following error:
    >>> [Thu Apr 09 15:35:13 2009] [warn] pid file e:/program files/cscopx/mdc/apache/logs/httpd.pid overwritten -- Unclean shutdown of previous Apache run? <<<
    before the error.log file could be opened.
    More information may be available in the error.log file. .
    The file cscopx/mdc/apache/logs/httpd.pid contains only the value "1436"

  • Daemon not running

    I am trying to run OEM and it is failing to start do to the daemon not running. On the http://localhost:5500/em login page it says the database might be shutdown and has a startup and recovery button. I clicked on startup, even though I know the database is up. I put in the login credentials and it fails with an IO error.
    Can anyone help me?

    Hi
    I can tell you about the Windows Environment. These steps may solve your problem.
    Check and perform the following.
    1. DBSNMP and SYSMAN accounts are NOT LOCKED.
    2. OS user responsible for starting services is a member of ORA_DBA group.
    3. OS user is a member of LOGON AS BATCH JOB in Local Security Policy.
    4. In Host Credentials provide the OS user name in the following way
    DOMAIN_NAME\username.
    5. Verify Listener is running and appropriate entries exists in TNSNAMES.ora file.
    Hope it helps.
    Rgds
    Adnan

  • FAIL: process hdbdaemon HDB Daemon not running - HANA

    Hello guys,
    I'm not being able to start a SAP HANA instance. Here's the output of the HDB start command:
    I've already check the free space on the files systems as you can see here:
    I can't figure out what is happening. Any suggestions?
    Regards.

    The startup error is somewhat misleading as Serge commented above:-
      > FAIL: process hdbdaemon HDB Daemon not running
    In a recent HEC HANA DB startup error scenario, the clue was this message in the startup.log file in the trace directory:-
    > Unable to change to Directory /usr/sap/<SID>/HDB<nn>/vh<cid><sid>db01/trace
    It turned out that the profile was edited with the incorrect instance number <nn>.  After correcting this error, HANA DB started up successfully.

  • How to get lauchctl daemons/agents to run only once a day

    How do you get a daemons/agents to run only once a day regardless of the error code of the .sh you are running?
    (not I'm not looking for run once or run on reboot. I want a job to run at 3am every day and it has several bash commands in it. Regardless of the returns by any of the commands in the script, I only want this to run once - NO RESPAWN).

    Ok still not working.. here is the plist
    the .sh file does file processing and then uploads xml files to my server and should run once a day. Here I have it running at 11:45am. It completes and then runs again and again and again.
    The plist is placed in LaunchAgents and loaded with $launchctl load com.iclassicnu.crontabtest.plist
    ideas?
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>label</key>
    <string>com.iclassicnu.crontabtest</string>
    <key>ProgramArguments</key>
    <array>
    <string>/Users/dan/Desktop/iClassicNu/Idea/Forexite/ForexUpdate.sh</string>
    </array>
    <key>WorkingDirectory</key>
    <string>/Users/dan/Desktop/iClassicNu/Idea/Forexite</string>
    <key>OnDemand</key>
    <false/>
    <key>Nice</key>
    <integer>1</integer>
    <key>StartCalendarInterval</key>
    <dict>
    <key>Hour</key>
    <integer>11</integer>
    <key>Minute</key>
    <integer>45</integer>
    </dict>
    <key>StandardErrorPath</key>
    <string>/Users/dan/tmp/icnTest1.err</string>
    <key>StandardOutPath</key>
    <string>/Users/dan/tmp/icnTest1.out</string>
    </dict>
    </plist>

  • Tomcat server is not running automatically

    Hi BO experts,
    I have installed SAP Business Objects XI 3.1 in my system and noticed that Tomcat server is not running in Central Configuration Manager where the status is "Stopped". If I start manually also it's not starting (In properties, the startup type is - Automatic).
    So I went this path "E:\Program Files\Business Objects\Tomcat55\bin" and double clicked "startup.bat" then I am able to login into Infoview. Could please someone explain that is there any possible way to run Tomcat automatally so that i do not need to start up manually every time?
    Thanks in advance!!

    I'm assuming that whoever installed the Apex Listener installed it under the Apache Tomcat application server. This isn't officially supported by Oracle, but it does work. You start Tomcat by executing "startup.bat" in its bin directory on Windows or "startup.sh" on Linux or other Unix-like OSes. In Windows, it will keep running as long as the command window is open (but you can minimize it) or I believe there is a way to set it up as a service - I'm not a Windows guru. In *nix, you can add an ampersand to the command to keep it running in background, or set it up to run as a daemon.
    Altogether, you probably need someone to learn more about how to run Tomcat if the person who set it up for you is no longer available. There is plenty of information on-line - just use Google or Bing.

  • Java Applets do not run when UAC is enabled on Windows 7

    HI,
    I'm deploying Java 6.0_26-b03+ on Windows 7 and experiencing following problem:
    Java applets do not run as standard domain users in Internet Explorer 9 on Windows 7 when UAC is enabled (i.E. http://www.java.com/de/download/installed.jsp). When logged on as Administrator or start IE9 as Administrator java applets do run.
    If I diable UAC an log on as normal user then applets do run. Applets then still run if UAC is re-enabled again. It seems that UAC needs to be disabled for the Java Plug-In to register something in user context (assumption). If this registration happended Java applets do run also for standard Windows 7 users if UAC is enabled.
    Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.
    Does anybody have the same problem and has already found a solution?
    This is the content of the error log file generated when a standard domain user tries to run http://www.java.com/de/download/installed.jsp
    +#+
    +# A fatal error has been detected by the Java Runtime Environment:+
    +#+
    +# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x776677b2, pid=1320, tid=2380+
    +#+
    +# JRE version: 6.0_26-b03+
    +# Java VM: Java HotSpot(TM) Client VM (20.1-b02 mixed mode, sharing windows-x86 )+
    +# Problematic frame:+
    +# C [ntdll.dll+0x477b2]+
    +#+
    +# If you would like to submit a bug report, please visit:+
    +# http://java.sun.com/webapps/bugreport/crash.jsp+
    +# The crash happened outside the Java Virtual Machine in native code.+
    +# See problematic frame for where to report the bug.+
    +#+
    ---------------  T H R E A D  ---------------
    +Current thread (0x01da8c00):  JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
    siginfo: ExceptionCode=0xc0000005, writing address 0x00000024
    Registers:
    EAX=0x00000024, EBX=0x33827b58, ECX=0x7c38b4e8, EDX=0x7efeff3d
    ESP=0x02616090, EBP=0x026160a4, ESI=0x00000024, EDI=0x00000020
    EIP=0x776677b2, EFLAGS=0x00250212
    Top of Stack: (sp=0x02616090)
    +0x02616090: 02616236 00000000 7c34214f 01da6bc8+
    +0x026160a0: 026160e4 026160ec 7c34f639 00000020+
    +0x026160b0: 7c36b73f 00000000 6d1db83c 02616236+
    +0x026160c0: 00000000 33827b58 7c38b548 026160b8+
    +0x026160d0: 0000000d 026160bc 02615b4c 026165e0+
    +0x026160e0: 7c34240d 7c382198 ffffffff 02616454+
    +0x026160f0: 6d1d3b45 6d1db83c 00000000 02616210+
    +0x02616100: 6d1db84c 01da8c00 33827b58 00000000+
    Instructions: (pc=0x776677b2)
    +0x77667792: 33 c0 5e 5d c2 04 00 90 90 90 90 90 90 90 8b ff+
    +0x776677a2: 55 8b ec 83 ec 0c 56 57 8b 7d 08 8d 77 04 8b c6+
    +0x776677b2: f0 0f ba 30 00 0f 83 eb e2 00 00 64 a1 18 00 00+
    +0x776677c2: 00 8b 48 24 89 4f 0c c7 47 08 01 00 00 00 5f 33+
    Register to memory mapping:
    EAX=0x00000024 is an unknown value
    EBX=0x33827b58 is an oop
    +{method}+
    +- klass: {other class}+
    ECX=0x7c38b4e8 is an unknown value
    EDX=0x7efeff3d is an unknown value
    ESP=0x02616090 is pointing into the stack for thread: 0x01da8c00
    EBP=0x026160a4 is pointing into the stack for thread: 0x01da8c00
    ESI=0x00000024 is an unknown value
    EDI=0x00000020 is an unknown value
    Stack: [0x02420000,0x02620000],  sp=0x02616090,  free space=2008k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    +C  [ntdll.dll+0x477b2] RtlEnterCriticalSection+0x12+
    +C  [MSVCR71.dll+0xf639] _crtGetLocaleInfoW+0x2b1+
    +C  [deploy.dll+0x3b45] Java_com_sun_deploy_config_WinConfig_installShortcut+0x235+
    j  com.sun.deploy.config.Config.versionUpdateCheck()V392+
    j  com.sun.deploy.config.Config.initialize()Z256+
    j  com.sun.deploy.config.Config.<clinit>()V1933+
    v  ~StubRoutines::call_stub
    +V  [jvm.dll+0xfae4b]+
    +V  [jvm.dll+0x18c531]+
    +V  [jvm.dll+0xfaecd]+
    +V  [jvm.dll+0x7deb7]+
    +V  [jvm.dll+0x7ed1e]+
    +V  [jvm.dll+0x7f009]+
    +V  [jvm.dll+0x7f126]+
    +V  [jvm.dll+0x4d719]+
    +V  [jvm.dll+0x4de7f]+
    +V  [jvm.dll+0x4e050]+
    +V  [jvm.dll+0x4ac51]+
    j  sun.plugin2.main.server.JVMManager.processJREInfo()V32+
    j  sun.plugin2.main.server.JVMManager.<init>()V86+
    j  sun.plugin2.main.server.JVMManager.<clinit>()V72+
    v  ~StubRoutines::call_stub
    +V  [jvm.dll+0xfae4b]+
    +V  [jvm.dll+0x18c531]+
    +V  [jvm.dll+0xfaecd]+
    +V  [jvm.dll+0x7deb7]+
    +V  [jvm.dll+0x7ed1e]+
    +V  [jvm.dll+0x7f009]+
    +V  [jvm.dll+0x7f126]+
    +V  [jvm.dll+0x4d719]+
    +V  [jvm.dll+0x4de7f]+
    +V  [jvm.dll+0x4e050]+
    +V  [jvm.dll+0x4ac51]+
    j  sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
    v  ~StubRoutines::call_stub
    +V  [jvm.dll+0xfae4b]+
    +V  [jvm.dll+0x18c531]+
    +V  [jvm.dll+0xfaecd]+
    +V  [jvm.dll+0x7deb7]+
    +V  [jvm.dll+0x7ed1e]+
    +V  [jvm.dll+0x7f009]+
    +V  [jvm.dll+0x7f126]+
    +V  [jvm.dll+0xb2ae9]+
    +V  [jvm.dll+0x94be8]+
    +C  [jp2iexp.dll+0x25b6] Java_sun_plugin2_main_server_WindowsHelper_uninstallHook+0xeaa+
    +C  [jp2iexp.dll+0x3b6b] Java_sun_plugin2_main_server_IExplorerPlugin_fillInExceptionInfo0+0x7ee+
    +C  [jp2iexp.dll+0xd2a4] DllGetClassObject+0x57c6+
    +C  [MSHTML.dll+0x156e41] RunHTMLApplication+0x1a9a+
    +C  [MSHTML.dll+0x156c95] RunHTMLApplication+0x18ee+
    +C  [MSHTML.dll+0x156cc3] RunHTMLApplication+0x191c+
    +C  [MSHTML.dll+0x156948] RunHTMLApplication+0x15a1+
    +C  [MSHTML.dll+0x15675f] RunHTMLApplication+0x13b8+
    +C  [MSHTML.dll+0x1563bf] RunHTMLApplication+0x1018+
    +C  [MSHTML.dll+0x15602e] RunHTMLApplication+0xc87+
    +C  [MSHTML.dll+0x99a35] MatchExactGetIDsOfNames+0x5eed7+
    +C  [MSHTML.dll+0x262624] CTravelLog_CreateInstance+0x1edcf+
    +C  [MSHTML.dll+0x29dc6f] DllGetClassObject+0x23eb1+
    +C  [MSHTML.dll+0x267e1c] CTravelLog_CreateInstance+0x245c7+
    +C  [MSHTML.dll+0x267d48] CTravelLog_CreateInstance+0x244f3+
    +C  [MSHTML.dll+0x267cad] CTravelLog_CreateInstance+0x24458+
    +C  [MSHTML.dll+0x267c0d] CTravelLog_CreateInstance+0x243b8+
    +C  [MSHTML.dll+0x24b83d] CTravelLog_CreateInstance+0x7fe8+
    +C  [MSHTML.dll+0x3ea169] DllGetClassObject+0x1703ab+
    +C  [MSHTML.dll+0x4095e0] DllGetClassObject+0x18f822+
    +C  [USER32.dll+0x1c4e7] gapfnScSendMessage+0x1cf+
    +C  [USER32.dll+0x1c5e7] gapfnScSendMessage+0x2cf+
    +C  [USER32.dll+0x1cc19] gapfnScSendMessage+0x901+
    +C  [USER32.dll+0x1cc70] DispatchMessageW+0xf+
    +C  [IEFRAME.dll+0xf1b83] Ordinal234+0x6520+
    +C  [IEFRAME.dll+0x111ac6] Ordinal224+0x17ff9+
    +C  [iertutil.dll+0x140150] Ordinal59+0x8b+
    +C  [IEFRAME.dll+0xffe03] Ordinal224+0x6336+
    +C  [kernel32.dll+0x53c45] BaseThreadInitThunk+0x12+
    +C  [ntdll.dll+0x637f5] RtlInitializeExceptionChain+0xef+
    +C  [ntdll.dll+0x637c8] RtlInitializeExceptionChain+0xc2+
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j  com.sun.deploy.config.WinConfig.getBrowserPath()Ljava/lang/String;0+
    j  com.sun.deploy.config.Config.versionUpdateCheck()V392+
    j  com.sun.deploy.config.Config.initialize()Z256+
    j  com.sun.deploy.config.Config.<clinit>()V1933+
    v  ~StubRoutines::call_stub
    j  sun.plugin2.main.server.JVMManager.processJREInfo()V32+
    j  sun.plugin2.main.server.JVMManager.<init>()V86+
    j  sun.plugin2.main.server.JVMManager.<clinit>()V72+
    v  ~StubRoutines::call_stub
    j  sun.plugin2.main.server.IExplorerPlugin.<clinit>()V41+
    v  ~StubRoutines::call_stub
    ---------------  P R O C E S S  ---------------
    Java Threads: ( => current thread )
    +0x03226400 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=1796, stack(0x0a8c0000,0x0a9c0000)]+
    +0x031e2c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2144, stack(0x0a7b0000,0x0a8b0000)]+
    +0x031d3800 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2036, stack(0x050d0000,0x051d0000)]+
    +0x031d2800 JavaThread "Attach Listener" daemon [_thread_blocked, id=1268, stack(0x0a5b0000,0x0a6b0000)]+
    +0x031d0800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1120, stack(0x0a4b0000,0x0a5b0000)]+
    +0x031ca000 JavaThread "Finalizer" daemon [_thread_blocked, id=1140, stack(0x09fc0000,0x0a0c0000)]+
    +0x031c8c00 JavaThread "Reference Handler" daemon [_thread_blocked, id=2500, stack(0x0a380000,0x0a480000)]+
    +=>0x01da8c00 JavaThread "main" [_thread_in_native, id=2380, stack(0x02420000,0x02620000)]+
    Other Threads:
    +0x0318c800 VMThread [stack: 0x0a1c0000,0x0a2c0000] [id=2672]+
    +0x031f2000 WatcherThread [stack: 0x0a9c0000,0x0aac0000] [id=2712]+
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation   total 4928K, used 281K [0x317e0000, 0x31d30000, 0x32280000)
    eden space 4416K,   6% used [0x317e0000, 0x31826480, 0x31c30000)
    from space 512K,   0% used [0x31c30000, 0x31c30000, 0x31cb0000)
    to   space 512K,   0% used [0x31cb0000, 0x31cb0000, 0x31d30000)
    tenured generation   total 10944K, used 0K [0x32280000, 0x32d30000, 0x337e0000)
    the space 10944K,   0% used [0x32280000, 0x32280000, 0x32280200, 0x32d30000)
    compacting perm gen  total 12288K, used 371K [0x337e0000, 0x343e0000, 0x377e0000)
    the space 12288K,   3% used [0x337e0000, 0x3383cc08, 0x3383ce00, 0x343e0000)
    ro space 10240K,  51% used [0x377e0000, 0x37d0dff8, 0x37d0e000, 0x381e0000)
    rw space 12288K,  55% used [0x381e0000, 0x3887c208, 0x3887c400, 0x38de0000)
    Code Cache  [0x0c910000, 0x0c980000, 0x0e910000)
    total_blobs=147 nmethods=5 adapters=79 free_code_cache=33098880 largest_free_block=0
    Dynamic libraries:
    +0x00a40000 - 0x00af8000      C:\Program Files\Internet Explorer\iexplore.exe+
    +0x77620000 - 0x7775c000      C:\Windows\SYSTEM32\ntdll.dll+
    +0x75f50000 - 0x76024000      C:\Windows\system32\kernel32.dll+
    +0x75a70000 - 0x75aba000      C:\Windows\system32\KERNELBASE.dll+
    +0x777a0000 - 0x77840000      C:\Windows\system32\ADVAPI32.dll+
    +0x75d60000 - 0x75e0c000      C:\Windows\system32\msvcrt.dll+
    +0x75ac0000 - 0x75ad9000      C:\Windows\SYSTEM32\sechost.dll+
    +0x764a0000 - 0x76541000      C:\Windows\system32\RPCRT4.dll+
    +0x77250000 - 0x77319000      C:\Windows\system32\USER32.dll+
    +0x76450000 - 0x7649e000      C:\Windows\system32\GDI32.dll+
    +0x77840000 - 0x7784a000      C:\Windows\system32\LPK.dll+
    +0x76550000 - 0x765ed000      C:\Windows\system32\USP10.dll+
    +0x75ee0000 - 0x75f37000      C:\Windows\system32\SHLWAPI.dll+
    +0x765f0000 - 0x7723a000      C:\Windows\system32\SHELL32.dll+
    +0x774c0000 - 0x7761c000      C:\Windows\system32\ole32.dll+
    +0x75c20000 - 0x75d30000      C:\Windows\system32\urlmon.dll+
    +0x76080000 - 0x7610f000      C:\Windows\system32\OLEAUT32.dll+
    +0x76110000 - 0x762c6000      C:\Windows\system32\iertutil.dll+
    +0x762d0000 - 0x763ea000      C:\Windows\system32\WININET.dll+
    +0x75f40000 - 0x75f43000      C:\Windows\system32\Normaliz.dll+
    +0x75d40000 - 0x75d5f000      C:\Windows\system32\IMM32.DLL+
    +0x75e10000 - 0x75edc000      C:\Windows\system32\MSCTF.dll+
    +0x66850000 - 0x67195000      C:\Windows\system32\IEFRAME.dll+
    +0x77240000 - 0x77245000      C:\Windows\system32\PSAPI.DLL+
    +0x73850000 - 0x7388c000      C:\Windows\system32\OLEACC.dll+
    +0x743d0000 - 0x7456e000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll+
    +0x75b70000 - 0x75beb000      C:\Windows\system32\comdlg32.dll+
    +0x73600000 - 0x73631000      C:\Program Files\Internet Explorer\IEShims.dll+
    +0x75740000 - 0x7574c000      C:\Windows\system32\CRYPTBASE.dll+
    +0x75590000 - 0x75598000      C:\Windows\system32\Secur32.dll+
    +0x756d0000 - 0x756eb000      C:\Windows\system32\SSPICLI.DLL+
    +0x757c0000 - 0x757cb000      C:\Windows\system32\profapi.dll+
    +0x77760000 - 0x77795000      C:\Windows\system32\WS2_32.dll+
    +0x75d30000 - 0x75d36000      C:\Windows\system32\NSI.dll+
    +0x750a0000 - 0x750e4000      C:\Windows\system32\dnsapi.DLL+
    +0x72fa0000 - 0x72fbc000      C:\Windows\system32\iphlpapi.DLL+
    +0x72f90000 - 0x72f97000      C:\Windows\system32\WINNSI.DLL+
    +0x757b0000 - 0x757be000      C:\Windows\system32\RpcRtRemote.dll+
    +0x63ef0000 - 0x64aa8000      C:\Windows\system32\MSHTML.dll+
    +0x74cb0000 - 0x74cb9000      C:\Windows\system32\VERSION.dll+
    +0x6f5f0000 - 0x6f6aa000      C:\Windows\system32\d2d1.dll+
    +0x6c8a0000 - 0x6c9aa000      C:\Windows\system32\DWrite.dll+
    +0x6d3c0000 - 0x6d443000      C:\Windows\system32\dxgi.dll+
    +0x739d0000 - 0x739e3000      C:\Windows\system32\dwmapi.dll+
    +0x75300000 - 0x75316000      C:\Windows\system32\CRYPTSP.dll+
    +0x758d0000 - 0x758fd000      C:\Windows\system32\WINTRUST.dll+
    +0x75950000 - 0x75a6d000      C:\Windows\system32\CRYPT32.dll+
    +0x75830000 - 0x7583c000      C:\Windows\system32\MSASN1.dll+
    +0x74b70000 - 0x74b91000      C:\Windows\system32\ntmarta.dll+
    +0x76030000 - 0x76075000      C:\Windows\system32\WLDAP32.dll+
    +0x75000000 - 0x7503b000      C:\Windows\system32\rsaenh.dll+
    +0x75ae0000 - 0x75b63000      C:\Windows\system32\CLBCatQ.DLL+
    +0x69240000 - 0x69272000      C:\Program Files\Internet Explorer\ieproxy.dll+
    +0x756f0000 - 0x7573c000      C:\Windows\system32\apphelp.dll+
    +0x74130000 - 0x74263000      C:\Windows\System32\msxml3.dll+
    +0x75750000 - 0x757af000      C:\Windows\system32\SXS.DLL+
    +0x73d90000 - 0x73d9b000      C:\Windows\system32\msimtf.dll+
    +0x6d390000 - 0x6d3bb000      C:\Windows\system32\msls31.dll+
    +0x77320000 - 0x774bd000      C:\Windows\system32\setupapi.dll+
    +0x75920000 - 0x75947000      C:\Windows\system32\CFGMGR32.dll+
    +0x75900000 - 0x75912000      C:\Windows\system32\DEVOBJ.dll+
    +0x73570000 - 0x7359c000      C:\Windows\system32\d3d10_1.dll+
    +0x734b0000 - 0x734ea000      C:\Windows\system32\d3d10_1core.dll+
    +0x6c770000 - 0x6c89c000      C:\Windows\system32\D3D10Warp.dll+
    +0x69760000 - 0x6978e000      C:\Windows\system32\MLANG.dll+
    +0x74970000 - 0x74a65000      C:\Windows\system32\PROPSYS.dll+
    +0x6ab00000 - 0x6ac02000      C:\Windows\system32\d3d10.dll+
    +0x73520000 - 0x73553000      C:\Windows\system32\d3d10core.dll+
    +0x73d40000 - 0x73d80000      C:\Windows\system32\UxTheme.dll+
    +0x73180000 - 0x731d2000      C:\Windows\system32\RASAPI32.dll+
    +0x73160000 - 0x73175000      C:\Windows\system32\rasman.dll+
    +0x73150000 - 0x7315d000      C:\Windows\system32\rtutils.dll+
    +0x6f6b0000 - 0x6f6b6000      C:\Windows\system32\sensapi.dll+
    +0x75190000 - 0x751cc000      C:\Windows\system32\mswsock.dll+
    +0x74d40000 - 0x74d45000      C:\Windows\System32\wshtcpip.dll+
    +0x747f0000 - 0x74815000      C:\Windows\system32\peerdist.dll+
    +0x74e00000 - 0x74e17000      C:\Windows\system32\USERENV.dll+
    +0x753f0000 - 0x7540b000      C:\Windows\system32\AUTHZ.dll+
    +0x747e0000 - 0x747f0000      C:\Windows\system32\NLAapi.dll+
    +0x72330000 - 0x72336000      C:\Windows\system32\rasadhlp.dll+
    +0x75180000 - 0x75186000      C:\Windows\System32\wship6.dll+
    +0x72b90000 - 0x72bc8000      C:\Windows\System32\fwpuclnt.dll+
    +0x695a0000 - 0x6975b000      C:\Windows\System32\jscript9.dll+
    +0x72de0000 - 0x72e1a000      C:\Windows\System32\Dxtrans.dll+
    +0x74790000 - 0x747a4000      C:\Windows\System32\ATL.DLL+
    +0x74330000 - 0x7433a000      C:\Windows\system32\ddrawex.dll+
    +0x694b0000 - 0x69597000      C:\Windows\system32\DDRAW.dll+
    +0x742d0000 - 0x742d6000      C:\Windows\system32\DCIMAN32.dll+
    +0x6c710000 - 0x6c769000      C:\Windows\System32\Dxtmsft.dll+
    +0x73a00000 - 0x73afb000      C:\Windows\system32\windowscodecs.dll+
    +0x6cf70000 - 0x6cfa2000      C:\Windows\system32\WINMM.dll+
    +0x739a0000 - 0x739cf000      C:\Windows\system32\XmlLite.dll+
    +0x74310000 - 0x74317000      C:\Windows\system32\msiltcfg.dll+
    +0x6c410000 - 0x6c650000      C:\Windows\system32\msi.dll+
    +0x6ac70000 - 0x6acb7000      C:\Windows\system32\Adobe\Director\SwDir.dll+
    +0x6c6d0000 - 0x6c703000      C:\Windows\system32\windowscodecsext.dll+
    +0x69790000 - 0x69809000      C:\Windows\system32\mscms.dll+
    +0x6ac30000 - 0x6ac68000      C:\Windows\system32\icm32.dll+
    +0x69410000 - 0x694ad000      C:\Windows\system32\Adobe\Shockwave 11\Control.dll+
    +0x6e810000 - 0x6e861000      C:\Windows\system32\winspool.drv+
    +0x69390000 - 0x69402000      C:\Windows\system32\DSOUND.dll+
    +0x74ac0000 - 0x74ae5000      C:\Windows\system32\POWRPROF.dll+
    +0x74a70000 - 0x74aa9000      C:\Windows\System32\MMDevApi.dll+
    +0x73960000 - 0x73996000      C:\Windows\system32\AUDIOSES.DLL+
    +0x736e0000 - 0x736ec000      C:\Windows\system32\mssprxy.dll+
    +0x69320000 - 0x6938a000      C:\Windows\system32\vbscript.dll+
    +0x653b0000 - 0x659de000      C:\Windows\system32\Macromed\Flash\Flash10t.ocx+
    +0x74f70000 - 0x74f78000      C:\Windows\system32\credssp.dll+
    +0x74f20000 - 0x74f5a000      C:\Windows\system32\schannel.DLL+
    +0x67430000 - 0x674f8000      C:\Windows\system32\OPENGL32.DLL+
    +0x68ce0000 - 0x68d02000      C:\Windows\system32\GLU32.dll+
    +0x10000000 - 0x10dc0000      C:\Windows\system32\ig4icd32.dll+
    +0x68c70000 - 0x68cd4000      C:\Windows\system32\D3DIM.DLL+
    +0x67360000 - 0x6742c000      C:\Windows\system32\D3DIM700.DLL+
    +0x01d40000 - 0x01d5f000      C:\Program Files\Java\jre6\bin\jp2iexp.dll+
    +0x7c340000 - 0x7c396000      C:\Program Files\Java\jre6\bin\MSVCR71.dll+
    +0x72d30000 - 0x72d37000      C:\Windows\system32\wsock32.dll+
    +0x71b10000 - 0x71b20000      C:\Windows\system32\napinsp.dll+
    +0x71af0000 - 0x71b02000      C:\Windows\system32\pnrpnsp.dll+
    +0x720d0000 - 0x720d8000      C:\Windows\System32\winrnr.dll+
    +0x71ae0000 - 0x71aed000      C:\Windows\system32\wshbth.dll+
    +0x6f8f0000 - 0x6f974000      C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\comctl32.dll+
    +0x6d7f0000 - 0x6da9f000      C:\PROGRA~1\Java\jre6\bin\client\jvm.dll+
    +0x6d7a0000 - 0x6d7ac000      C:\PROGRA~1\Java\jre6\bin\verify.dll+
    +0x6d320000 - 0x6d33f000      C:\PROGRA~1\Java\jre6\bin\java.dll+
    +0x6d7e0000 - 0x6d7ef000      C:\PROGRA~1\Java\jre6\bin\zip.dll+
    +0x01dc0000 - 0x01dc6000      C:\Program Files\Java\jre6\bin\jp2native.dll+
    +0x6d1d0000 - 0x6d1e3000      C:\Program Files\Java\jre6\bin\deploy.dll+
    VM Arguments:
    jvm_args: -Xbootclasspath/a:C:\PROGRA~1\Java\jre6\lib\deploy.jar;C:\PROGRA~1\Java\jre6\lib\javaws.jar;C:\PROGRA~1\Java\jre6\lib\plugin.jar -Xmx32m -Djava.awt.headless=true -Dkernel.background.download=false -Dkernel.download.dialog=false -XX:MaxDirectMemorySize=64m
    java_command: <unknown>
    Launcher Type: generic
    Environment Variables:
    PATH=C:\Program Files\Internet Explorer;;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Windows\system32\Empirum
    USERNAME=%username%
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 42 Stepping 7, GenuineIntel
    ---------------  S Y S T E M  ---------------
    OS: Windows 7 Build 7601 Service Pack 1
    CPU:total 4 (2 cores per cpu, 2 threads per core) family 6 model 42 stepping 7, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, popcnt, ht
    Memory: 4k page, physical 3063864k(2285416k free), swap 6125972k(5328168k free)
    vm_info: Java HotSpot(TM) Client VM (20.1-b02) for windows-x86 JRE (1.6.0_26-b03), built on May  4 2011 00:50:59 by "java_re" with MS VC+ 7.1 (VS2003)+
    time: Thu Jun 30 17:20:35 2011
    elapsed time: 0 seconds

    user11262844 wrote:
    Since we're planning a corporate Windows 7 rollout (>800PCs) we cannot do this manually on every computer. Ther must be any solution for this problem.If you're doing a corporate rollout of that size then surely you're just making an image of the desired configuration and just duplicating it onto the 800 PCs? In which case you would just configure IE appropriately as part of the image.
    Or alternatively you are manually configuring each of the 800 PCs, in which case this would be just one more thing in the checklist.

  • Amavisd not running, mails not delivered when spam filter is enabled

    Hey everyone,
    So I've got a slight problem here with a 10.4.11 server. Our spam filter was set to be too tolerant of spam, allowing a threshold 22.0 before bouncing it, so through the command line I edited /etc/amavisd.conf to $sa_kill_level_deflt = 6.0; tag2 is set to 3.0. Then I bounced amavisd via:
    sudo /bin/launchctl unload /System/Library/LaunchDaemons/org.amavis.amavisd.plist
    sudo /bin/launchctl load /System/Library/LaunchDaemons/org.amavis.amavisd.plist
    Well that caused all sorts of whacky issues with the queue. The server couldn't connect to itself and wouldn't deliver any mail, only queue it up. So I went back in to amavisd.conf and changed the parameters back to default, then bounced amavisd again. To no avail. Then I restored from a backup file I had created and bounced amavisd again to no avail.
    Finally I removed the junkmail and virus filters via SA, saved, then reenabled them to no avail. Then I just disabled them and mail is flowing again, but I still have 187 messages in my queue that wont get delivered no matter how many times I flush it.
    After more research, I issued a ps -U clamav to see if amavisd is running, below are the only results I get:
    PID TT STAT TIME COMMAND
    1291 ?? Ss 0:00.01 freshclam -d -D -pfreshclam.pid -c 1
    I would assume it is NOT running...? I next issued amavisd to see if it throws any errors, and get the following:
    ERROR: MISSING REQUIRED BASIC MODULES:
    MIME::Parser
    BEGIN failed--compilation aborted at /usr/bin/amavisd line 139.
    So my next question is how do I repair amavisd so I can get it to run so I can reenable the content filter. Here are the results of postconf in case you need them:
    2bounce_notice_recipient = postmaster
    access_map_reject_code = 554
    address_verify_default_transport = $default_transport
    address_verify_local_transport = $local_transport
    address_verify_map =
    address_verify_negative_cache = yes
    address_verify_negative_expire_time = 3d
    address_verify_negative_refresh_time = 3h
    address_verify_poll_count = 3
    address_verify_poll_delay = 3s
    address_verify_positive_expire_time = 31d
    address_verify_positive_refresh_time = 7d
    address_verify_relay_transport = $relay_transport
    address_verify_relayhost = $relayhost
    address_verify_sender = postmaster
    address_verify_service_name = verify
    address_verify_transport_maps = $transport_maps
    address_verify_virtual_transport = $virtual_transport
    alias_database = hash:/etc/aliases
    alias_maps = hash:/etc/aliases
    allow_mail_to_commands = alias, forward
    allow_mail_to_files = alias, forward
    allow_min_user = no
    allow_percent_hack = yes
    allow_untrusted_routing = no
    alternate_config_directories =
    always_bcc =
    append_at_myorigin = yes
    append_dot_mydomain = yes
    application_event_drain_time = 100s
    backwards_bounce_logfile_compatibility = yes
    berkeley_db_create_buffer_size = 16777216
    berkeley_db_read_buffer_size = 131072
    best_mx_transport =
    biff = yes
    body_checks =
    body_checks_size_limit = 51200
    bounce_notice_recipient = postmaster
    bounce_queue_lifetime = 5d
    bounce_service_name = bounce
    bounce_size_limit = 50000
    broken_sasl_auth_clients = no
    canonical_maps =
    cleanup_service_name = cleanup
    command_directory = /usr/sbin
    command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    command_time_limit = 1000s
    config_directory = /etc/postfix
    content_filter =
    daemon_directory = /usr/libexec/postfix
    daemon_timeout = 18000s
    debug_peer_level = 2
    debug_peer_list =
    default_database_type = hash
    default_delivery_slot_cost = 5
    default_delivery_slot_discount = 50
    default_delivery_slot_loan = 3
    default_destination_concurrency_limit = 20
    default_destination_recipient_limit = 50
    default_extra_recipient_limit = 1000
    default_minimum_delivery_slots = 3
    default_privs = nobody
    default_process_limit = 100
    default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
    default_recipient_limit = 10000
    default_transport = smtp
    default_verp_delimiters = +=
    defer_code = 450
    defer_service_name = defer
    defer_transports =
    delay_notice_recipient = postmaster
    delay_warning_time = 0h
    deliver_lock_attempts = 20
    deliver_lock_delay = 1s
    disable_dns_lookups = no
    disable_mime_input_processing = no
    disable_mime_output_conversion = no
    disable_verp_bounces = no
    disable_vrfy_command = no
    dont_remove = 0
    double_bounce_sender = double-bounce
    duplicate_filter_limit = 1000
    empty_address_recipient = MAILER-DAEMON
    enable_errors_to = no
    enable_original_recipient = yes
    enable_server_options = yes
    error_notice_recipient = postmaster
    error_service_name = error
    expand_owner_alias = no
    export_environment = TZ MAIL_CONFIG
    fallback_relay =
    fallback_transport =
    fast_flush_domains = $relay_domains
    fast_flush_purge_time = 7d
    fast_flush_refresh_time = 12h
    fault_injection_code = 0
    flush_service_name = flush
    fork_attempts = 5
    fork_delay = 1s
    forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
    hash_queue_depth = 1
    hash_queue_names = incoming, active, deferred, bounce, defer, flush, hold, trace
    header_address_token_limit = 10240
    header_checks =
    header_size_limit = 102400
    helpful_warnings = yes
    home_mailbox =
    hopcount_limit = 50
    html_directory = no
    ignore_mx_lookup_error = no
    import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY
    in_flow_delay = 1s
    inet_interfaces = all
    initial_destination_concurrency = 5
    invalid_hostname_reject_code = 501
    ipc_idle = 100s
    ipc_timeout = 3600s
    ipc_ttl = 1000s
    line_length_limit = 2048
    lmtp_cache_connection = yes
    lmtp_connect_timeout = 0s
    lmtp_data_done_timeout = 600s
    lmtp_data_init_timeout = 120s
    lmtp_data_xfer_timeout = 180s
    lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
    lmtp_destination_recipient_limit = $default_destination_recipient_limit
    lmtp_lhlo_timeout = 300s
    lmtp_mail_timeout = 300s
    lmtp_quit_timeout = 300s
    lmtp_rcpt_timeout = 300s
    lmtp_rset_timeout = 120s
    lmtp_sasl_auth_enable = no
    lmtp_sasl_password_maps =
    lmtp_sasl_security_options = noplaintext, noanonymous
    lmtp_send_xforward_command = no
    lmtp_skip_quit_response = no
    lmtp_tcp_port = 24
    lmtp_xforward_timeout = 300s
    local_command_shell =
    local_destination_concurrency_limit = 2
    local_destination_recipient_limit = 1
    local_recipient_maps =
    local_transport = local:$myhostname
    luser_relay = undeliverable
    mail_name = Postfix
    mail_owner = postfix
    mail_release_date = 20040915
    mail_spool_directory = /var/mail
    mail_version = 2.1.5
    mailbox_command =
    mailbox_command_maps =
    mailbox_delivery_lock = flock
    mailbox_size_limit = 0
    mailbox_transport = cyrus
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    maps_rbl_reject_code = 554
    masquerade_classes = envelope_sender, header_sender, header_recipient
    masquerade_domains =
    masquerade_exceptions =
    max_idle = 100s
    max_use = 100
    maximal_backoff_time = 4000s
    maximal_queue_lifetime = 5d
    message_size_limit = 0
    mime_boundary_length_limit = 2048
    mime_header_checks = $header_checks
    mime_nesting_limit = 100
    minimal_backoff_time = 1000s
    multi_recipient_bounce_reject_code = 550
    mydestination = $myhostname,localhost.$mydomain,localhost,mail.mnn.org,$mydomain,youthchannel.o rg,mnn.org
    mydomain = mnn.org
    mydomain_fallback = localhost
    myhostname = mail.mnn.org
    mynetworks = 127.0.0.0/8,192.168.0.0/16,216.164.83.160/27
    mynetworks_style = host
    myorigin = $myhostname
    nested_header_checks = $header_checks
    newaliases_path = /usr/bin/newaliases
    non_fqdn_reject_code = 504
    notify_classes = resource, software
    owner_request_special = yes
    parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_a uthorized_clients,relay_domains,smtpd_access_maps
    permit_mx_backup_networks =
    pickup_service_name = pickup
    prepend_delivered_header = command, file, forward
    process_id_directory = pid
    propagate_unmatched_extensions = canonical, virtual
    proxy_interfaces =
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks
    qmgr_clog_warn_time = 300s
    qmgr_fudge_factor = 100
    qmgr_message_active_limit = 20000
    qmgr_message_recipient_limit = 20000
    qmgr_message_recipient_minimum = 10
    qmqpd_authorized_clients =
    qmqpd_error_delay = 1s
    qmqpd_timeout = 300s
    queue_directory = /private/var/spool/postfix
    queue_file_attribute_count_limit = 100
    queue_minfree = 0
    queue_run_delay = 1000s
    queue_service_name = qmgr
    rbl_reply_maps =
    readme_directory = /usr/share/doc/postfix
    receive_override_options =
    recipient_bcc_maps =
    recipient_canonical_maps =
    recipient_delimiter =
    reject_code = 554
    relay_clientcerts =
    relay_destination_concurrency_limit = $default_destination_concurrency_limit
    relay_destination_recipient_limit = $default_destination_recipient_limit
    relay_domains = $mydestination
    relay_domains_reject_code = 554
    relay_recipient_maps =
    relay_transport = relay
    relayhost =
    relocated_maps =
    require_home_directory = no
    resolve_dequoted_address = yes
    resolve_null_domain = no
    rewrite_service_name = rewrite
    sample_directory = /usr/share/doc/postfix/examples
    sender_based_routing = no
    sender_bcc_maps =
    sender_canonical_maps =
    sendmail_path = /usr/sbin/sendmail
    service_throttle_time = 60s
    setgid_group = postdrop
    show_user_unknown_table_name = yes
    showq_service_name = showq
    smtp_always_send_ehlo = yes
    smtp_bind_address =
    smtp_connect_timeout = 30s
    smtp_data_done_timeout = 600s
    smtp_data_init_timeout = 120s
    smtp_data_xfer_timeout = 180s
    smtp_defer_if_no_mx_address_found = no
    smtp_destination_concurrency_limit = $default_destination_concurrency_limit
    smtp_destination_recipient_limit = $default_destination_recipient_limit
    smtp_enforce_tls = no
    smtp_helo_name = $myhostname
    smtp_helo_timeout = 300s
    smtp_host_lookup = dns
    smtp_line_length_limit = 990
    smtp_mail_timeout = 300s
    smtp_mx_address_limit = 0
    smtp_mx_session_limit = 2
    smtp_never_send_ehlo = no
    smtp_pix_workaround_delay_time = 10s
    smtp_pix_workaround_threshold_time = 500s
    smtp_quit_timeout = 300s
    smtp_quote_rfc821_envelope = yes
    smtp_randomize_addresses = yes
    smtp_rcpt_timeout = 300s
    smtp_rset_timeout = 120s
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtp_sasl_security_options = noplaintext, noanonymous
    smtp_sasl_tls_security_options = $var_smtp_sasl_opts
    smtp_sasl_tls_verified_security_options = $var_smtp_sasl_tls_opts
    smtp_send_xforward_command = no
    smtp_skip_5xx_greeting = yes
    smtp_skip_quit_response = yes
    smtp_starttls_timeout = 300s
    smtp_tls_CAfile =
    smtp_tls_CApath =
    smtp_tls_cert_file =
    smtp_tls_cipherlist =
    smtp_tls_dcert_file =
    smtp_tls_dkey_file = $smtp_tls_dcert_file
    smtp_tls_enforce_peername = yes
    smtp_tls_key_file = $smtp_tls_cert_file
    smtp_tls_loglevel = 0
    smtp_tls_note_starttls_offer = no
    smtp_tls_per_site =
    smtp_tls_scert_verifydepth = 5
    smtp_tls_session_cache_database =
    smtp_tls_session_cache_timeout = 3600s
    smtp_use_tls = no
    smtp_xforward_timeout = 300s
    smtpd_authorized_verp_clients = $authorized_verp_clients
    smtpd_authorized_xclient_hosts =
    smtpd_authorized_xforward_hosts =
    smtpd_banner = $myhostname ESMTP $mail_name
    smtpd_client_connection_count_limit = 50
    smtpd_client_connection_limit_exceptions = $mynetworks
    smtpd_client_connection_rate_limit = 0
    smtpd_client_restrictions = permit_mynetworks reject_rbl_client zen.spamhaus.org reject_rbl_client bl.spamcop.net permit
    smtpd_data_restrictions =
    smtpd_delay_reject = yes
    smtpd_enforce_tls = no
    smtpd_error_sleep_time = 1s
    smtpd_etrn_restrictions =
    smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghi jklmnopqrstuvwxyz{|}~
    smtpd_hard_error_limit = 20
    smtpd_helo_required = no
    smtpd_helo_restrictions =
    smtpd_history_flush_threshold = 100
    smtpd_junk_command_limit = 100
    smtpd_noop_commands =
    smtpd_null_access_lookup_key =
    smtpd_policy_service_max_idle = 300s
    smtpd_policy_service_max_ttl = 1000s
    smtpd_policy_service_timeout = 100s
    smtpd_proxy_ehlo = $myhostname
    smtpd_proxy_filter =
    smtpd_proxy_timeout = 100s
    smtpd_pw_server_security_options = gssapi,cram-md5,login,plain
    smtpd_recipient_limit = 1000
    smtpd_recipient_overshoot_limit = 1000
    smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination,permit
    smtpd_reject_unlisted_recipient = yes
    smtpd_reject_unlisted_sender = no
    smtpd_restriction_classes =
    smtpd_sasl_application_name = smtpd
    smtpd_sasl_auth_enable = yes
    smtpd_sasl_exceptions_networks =
    smtpd_sasl_local_domain =
    smtpd_sasl_security_options = noanonymous
    smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
    smtpd_sender_login_maps =
    smtpd_sender_restrictions =
    smtpd_soft_error_limit = 10
    smtpd_starttls_timeout = 300s
    smtpd_timeout = 300s
    smtpd_tls_CAfile =
    smtpd_tls_CApath =
    smtpd_tls_ask_ccert = no
    smtpd_tls_auth_only = no
    smtpd_tls_ccert_verifydepth = 5
    smtpd_tls_cert_file =
    smtpd_tls_cipherlist =
    smtpd_tls_dcert_file =
    smtpd_tls_dh1024_param_file =
    smtpd_tls_dh512_param_file =
    smtpd_tls_dkey_file = $smtpd_tls_dcert_file
    smtpd_tls_key_file =
    smtpd_tls_loglevel = 0
    smtpd_tls_received_header = no
    smtpd_tls_req_ccert = no
    smtpd_tls_session_cache_database =
    smtpd_tls_session_cache_timeout = 3600s
    smtpd_tls_wrappermode = no
    smtpd_use_pw_server = yes
    smtpd_use_tls = no
    soft_bounce = no
    stale_lock_time = 500s
    strict_7bit_headers = no
    strict_8bitmime = no
    strict_8bitmime_body = no
    strict_mime_encoding_domain = no
    strict_rfc821_envelopes = no
    sun_mailtool_compatibility = no
    swap_bangpath = yes
    syslog_facility = mail
    syslog_name = postfix
    tls_daemon_random_bytes = 32
    tls_daemon_random_source =
    tls_random_bytes = 32
    tls_random_exchange_name = ${config_directory}/prng_exch
    tls_random_prng_update_period = 60s
    tls_random_reseed_period = 3600s
    tls_random_source =
    trace_service_name = trace
    transport_maps =
    transport_retry_time = 60s
    trigger_timeout = 10s
    undisclosed_recipients_header = To: undisclosed-recipients:;
    unknown_address_reject_code = 450
    unknown_client_reject_code = 450
    unknown_hostname_reject_code = 450
    unknown_local_recipient_reject_code = 550
    unknown_relay_recipient_reject_code = 550
    unknown_virtual_alias_reject_code = 550
    unknown_virtual_mailbox_reject_code = 550
    unverified_recipient_reject_code = 450
    unverified_sender_reject_code = 450
    verp_delimiter_filter = -=+
    virtual_alias_domains = $virtual_alias_maps
    virtual_alias_expansion_limit = 1000
    virtual_alias_maps = $virtual_maps
    virtual_alias_recursion_limit = 1000
    virtual_destination_concurrency_limit = $default_destination_concurrency_limit
    virtual_destination_recipient_limit = $default_destination_recipient_limit
    virtual_gid_maps =
    virtual_mailbox_base =
    virtual_mailbox_domains = $virtual_mailbox_maps
    virtual_mailbox_limit = 51200000
    virtual_mailbox_lock = fcntl
    virtual_mailbox_maps =
    virtual_minimum_uid = 100
    virtual_transport = virtual
    virtual_uid_maps =
    TIA for an help!
    Andrew

    To get the queue going, issue:
    sudo postsuper -r ALL
    That said, I would think you initially introduced a typo in amavisd.conf. Next you probably restored amavisd and amavisd.conf files which were incompatible with each other and/or amavis incompatible with the updated perl modules of the latest security update.
    To fix things, I would re-apply the latest combo updater and security updates (assuming you are running stock versions and have not installed your own versions of amavisd, etc).
    If things still do not work, please post the output of:
    amavisd -V

  • Service not running logged an alert?

    Hello,
    There is a service on a Linux machine I don't want it to run.
    I am getting an alert from SCOM:
    Alert: SUSE Linux Enterprise Server 11 Process Klog Monitor Alert
    Resolution state: New
    Source: SUSE Linux Enterprise Server 11 (x86_64)
    Path: Server
    Last modified by: System
    Last modified time: 4/21/2014 6:54:58 AM
    Alert description: The KLOGD - Kernel Message Logging daemon on server Server is not running.
    I could disable the alert for this service on this server Server but anyway to prevent the server Server to send this information. I know in Windows if the startup type is set to "Automatic" SCOM is looking for a service running, if the Startup
    type is set to manual no check.
    Do we have the same type of check in Linux?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    Dom,
    Doesn't work the same as Windows. Just override the monitor in the MP and disable it from monitoring the klog daemon.
    Regards,
    -Steve

  • Cron jobs not running

    Hi
    I am using linux 5.x
    uname -r
    2.6.18-348.16.1.0.1.el5PAE
    I have 2 crontab jobs set up as following .
    cat backup_confluence.sh
    #!/bin/bash
    # bash shell script to backup confluence backups to bccpfr
    # Schedule this script after the backups are performed that day
    # Setup the environment for the bourne-again shell
    . ./.bash_profile
    # Copy the daily backups for confluence
    find /usr/share/confluence/data/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/confluence \;
    second
    cat  backup_jira.sh
    #!/bin/bash
    # bash shell script to backup jira backups to bccpfr
    # Schedule this script after the backups are performed that day
    # Setup the environment for the bourne-again shell
    . ./.bash_profile
    # Copy the daily backups for jira
    find /usr/share/jira/backups -mtime -1 \! -type d -exec ls {} \; -exec scp {} bccpfr:/usr/backup/jira \;
    cron as following
    $ crontab -l
    13 06 * * * /home/lsg/backup_jira.sh
    18 06 * * * /home/lsg/backup_confluence.sh
    Issue
    Both the above .sh are running properly when executed  manually but they are not running automatically at the given time crontab job.
    Kindly help me on this issue.
    many thanks
    J

    Is your crontask not running at all or is the scheduled task failing?
    Hey Tommy I sent you some replies yesterday; don't know what happened to them. Yes I can see that crond runs every ten minutes. Also when I created the crontab file using the command you sent here I could see that it was running every minute by looking at root mail in /var/log.
    Do you have execute permission set on the scripts?
    Yes
    Any info in /var/log/messages or e-mail?
    Output from mail-
    From root@razorback  Tue Feb 11 08:19:01 2014
    Return-Path: <root@razorback>
    Received: from razorback (localhost [127.0.0.1])
        by razorback (8.13.8/8.13.8) with ESMTP id s1BEJ154018231
        for <root@razorback>; Tue, 11 Feb 2014 08:19:01 -0600
    Received: (from root@localhost)
        by razorback (8.13.8/8.13.8/Submit) id s1BEJ1rh018198;
        Tue, 11 Feb 2014 08:19:01 -0600
    Date: Tue, 11 Feb 2014 08:19:01 -0600
    Message-Id: <201402111419.s1BEJ1rh018198@razorback>
    From: root@razorback (Cron Daemon)
    To: root@razorback
    Subject: Cron <root@razorback> $(date) >> /tmp/cronout
    Content-Type: text/plain; charset=UTF-8
    Auto-Submitted: auto-generated
    X-Cron-Env: <SHELL=/bin/sh>
    X-Cron-Env: <HOME=/root>
    X-Cron-Env: <PATH=/usr/bin:/bin>
    X-Cron-Env: <LOGNAME=root>
    X-Cron-Env: <USER=root>
    /bin/sh: Tue: command not found
    From root@razorback  Tue Feb 11 08:20:02 2014
    Return-Path: <root@razorback>
    Received: from razorback (localhost [127.0.0.1])
        by razorback (8.13.8/8.13.8) with ESMTP id s1BEK2BD018267
        for <root@razorback>; Tue, 11 Feb 2014 08:20:02 -0600
    Received: (from root@localhost)
        by razorback (8.13.8/8.13.8/Submit) id s1BEK1mT018238;
        Tue, 11 Feb 2014 08:20:01 -0600
    Date: Tue, 11 Feb 2014 08:20:01 -0600
    Message-Id: <201402111420.s1BEK1mT018238@razorback>
    From: root@razorback (Cron Daemon)
    To: root@razorback
    Subject: Cron <root@razorback> $(date) >> /tmp/cronout
    Content-Type: text/plain; charset=UTF-8
    Auto-Submitted: auto-generated
    X-Cron-Env: <SHELL=/bin/sh>
    X-Cron-Env: <HOME=/root>
    X-Cron-Env: <PATH=/usr/bin:/bin>
    X-Cron-Env: <LOGNAME=root>
    X-Cron-Env: <USER=root>
    /bin/sh: Tue: command not found

  • Problem with OVM Server 3.2.6 - xend not running

    Hi, just now I upgraded my server to OVM Server 3.2.6 version and server boots up, cluster is up but I have message that Hypervisor is running in UNDETERMINED bit mode (WARNING: XEND IS PROBABLY NOT RUNNING). While boot I saw message that xend failed to start because "mount point /proc/xen does not exist". Also when it tries to start xend, there is message "xencommons should be started first". Reinstalling OVMS did not help. Does anyone have this problem?
    Thanks.

    For me, it looks like the same.
    1 - Yes
    2 - B
    3 - Not yet, I've tried to downgrade to 3.2.4, but it is not possible.
    4.1 - service xend status:
    xc: error: Could not obtain handle on privileged command interface (2 = No such file or directory): Internal error
    Traceback (most recent call last):
      File "/usr/sbin/xend", line 36, in ?
        from xen.xend.server import SrvDaemon
      File "/usr/lib64/python2.4/site-packages/xen/xend/server/SrvDaemon.py", line 26, in ?
        import relocate
      File "/usr/lib64/python2.4/site-packages/xen/xend/server/relocate.py", line 28, in ?
        from xen.xend import XendDomain
      File "/usr/lib64/python2.4/site-packages/xen/xend/XendDomain.py", line 36, in ?
        from xen.xend import XendOptions, XendCheckpoint, XendDomainInfo
      File "/usr/lib64/python2.4/site-packages/xen/xend/XendCheckpoint.py", line 20, in ?
        from xen.xend import balloon, sxp, image
      File "/usr/lib64/python2.4/site-packages/xen/xend/image.py", line 46, in ?
        xc = xen.lowlevel.xc.xc()
    xen.lowlevel.xc.Error: (1, 'Internal error', 'xc_interface_open failed: No such file or directory')
    xend daemon is stopped
    4.2 - service ovs-agent status:
    log server (pid 4460) is running...
    notification server (pid 4489) is running...
    remaster server (pid 4492) is running...
    monitor server (pid 4494) is running...
    ha server (pid 4496) is running...
    stats server (pid 4498) is running...
    xmlrpc server (pid 4499) is running...

  • Apex Tomcat server is not running

    oracle version :10g
    apex Version :4.0
    OS :unix
    1.database server is working
    2.apex server down
    3.we increased tablespaces
    4.checked locked account also.
    every thing fine .
    but we cannot able to access server we are receving message
    unable to found server
    tomcat is not running .
    can you please help us to run tomcat .
    regards
    r

    I'm assuming that whoever installed the Apex Listener installed it under the Apache Tomcat application server. This isn't officially supported by Oracle, but it does work. You start Tomcat by executing "startup.bat" in its bin directory on Windows or "startup.sh" on Linux or other Unix-like OSes. In Windows, it will keep running as long as the command window is open (but you can minimize it) or I believe there is a way to set it up as a service - I'm not a Windows guru. In *nix, you can add an ampersand to the command to keep it running in background, or set it up to run as a daemon.
    Altogether, you probably need someone to learn more about how to run Tomcat if the person who set it up for you is no longer available. There is plenty of information on-line - just use Google or Bing.

  • Calendar utilities report that Calendar server is not running

    Hi All,
    When i try to use calendar server utilities e.g. uniwho, unistat, unicpoutu etc, I always get server is down or server is not running but while using other utilities e.g. uniical, uniuser, uniping works fine.
    I have started/stopped server many times using unistart/unistop but result is same. Web portal and windows client works fine.
    Can anybody guess, what can be the problem? Why some utilities can work and some can't?
    Thanks and Regards

    On other side opmnctl status shows that everything is alive ...
    Processes in Instance: ocsapps.qalotus1.in.zimbra.com
    ------------------------------------------------+---------
    ias-component | process-type | pid | status
    ------------------------------------------------+---------
    HTTP_Server | HTTP_Server | 3192 | Alive
    DSA | DSA | 3176 | Alive
    LogLoader | logloaderd | N/A | Down
    dcm-daemon | dcm-daemon | N/A | Down
    WebCache | WebCache | 4668 | Alive
    WebCache | WebCacheAdmin | 3076 | Alive
    OC4J | OC4J_OCSClient | 3708 | Alive
    OC4J | OC4J_Mail | 3304 | Alive
    email | email_housekeeper | 3560 | Alive
    email | email_imap | 4792 | Alive
    email | email_listserver | 4832 | Alive
    email | email_nntp_in | 5496 | Alive
    email | email_nntp_out | 2800 | Alive
    email | email_pop | 2284 | Alive
    email | email_smtp_in | 5848 | Alive
    email | email_smtp_out | 5756 | Alive
    email | email_virus_scrub~ | 4844 | Alive
    CalendarServer | Calendar_CSM | 3704 | Alive
    CalendarServer | Calendar_CWS | 4404 | Alive
    CalendarServer | Calendar_DAS | 3976 | Alive
    CalendarServer | Calendar_SNC | 1480 | Alive
    CalendarServer | Calendar_ENG | 4276 | Alive
    CalendarServer | Calendar_LCK | 4516 | Alive
    how can be so contradictory status information? Or its me only who cant interpret it in correct way?

  • TcpInitiator is not running - java.lang.IllegalStateException

    This is the first time we have seen this exception on our Extend-client side in the past 6 months. What is the reason we are getting this? How can this be fixed? Do we need to do some autostart some where?
    java.lang.IllegalStateException: XYZ-tcpProxy:TcpInitiator is not running
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.peer.Initiator.ensureConnection(Initiator.CDB:5)
         at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.openChannel(RemoteCacheService.CDB:5)
         at com.tangosol.coherence.component.net.extend.RemoteService.ensureChannel(RemoteService.CDB:6)
         at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.createRemoteNamedCache(RemoteCacheService.CDB:12)
         at com.tangosol.coherence.component.net.extend.remoteService.RemoteCacheService.ensureCache(RemoteCacheService.CDB:39)
         at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache$Router(SafeCacheService.CDB:1)
         at com.tangosol.coherence.component.util.safeService.SafeCacheService.ensureCache(SafeCacheService.CDB:46)
         at com.barcap.edt.flow.core.impl.cache.CoherenceCacheFactory$1.doTry(CoherenceCacheFactory.java:87)
         at com.barcap.edt.flow.core.impl.cache.CoherenceCacheFactory$1.doTry(CoherenceCacheFactory.java:1)
         at com.barcap.edt.flow.core.util.retry.RetryUtil.tryIt(RetryUtil.java:65)
         ... 2 more
    Edited by: A.G. on Mar 10, 2010 5:55 PM

    Dave,
    Thanks for looking at the issue we encountered. Our Extend client config is as follows. Unfortunately I do not have the full log from the extend client vm as in this case extend client runs on our client's desktop.
    <?xml version='1.0'?>
    <cache-config>
    <caching-scheme-mapping>
    <cache-mapping>
    <cache-name>xyz</cache-name>
    <scheme-name>xyz-tcpProxy</scheme-name>
    </cache-mapping>
    </caching-scheme-mapping>
    <caching-schemes>
    <remote-cache-scheme>
    <scheme-name>xyz-tcpProxy</scheme-name>
    <service-name>xyz-tcpProxy</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    <address>proxy-host-address-01</address>
    <port>22001</port>
    </socket-address>
    <socket-address>
    <address>proxy-host-address-nn</address>
    <port>22001</port>
    </socket-address>
    <connect-timeout>10000</connect-timeout>
    </remote-addresses>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>30000</request-timeout>
    </outgoing-message-handler>
    </initiator-config>
    </remote-cache-scheme>
    <remote-invocation-scheme>
    <scheme-name>xyz-remoteInvocation</scheme-name>
    <service-name>xyz-remoteInvocation</service-name>
    <initiator-config>
    <tcp-initiator>
    <remote-addresses>
    <socket-address>
    <address>proxy-host-address-01</address>
    <port>22001</port>
    </socket-address>
    <socket-address>
    <address>proxy-host-address-nn</address>
    <port>22001</port>
    </socket-address>
    <connect-timeout>10000</connect-timeout>
    </remote-addresses>
    </tcp-initiator>
    <outgoing-message-handler>
    <request-timeout>30000</request-timeout>
    </outgoing-message-handler>
    </initiator-config>
    </remote-invocation-scheme>
    </caching-schemes>
    </cache-config>
    Regards
    /A.G.

  • How to Display Alerts evenwhen application is not running

    hi freinds
    i want to tell the user that some data has gone into a
    particular table through a back end procedure
    (process/job) ..through an alert on the screen.
    this has to be done in each of the client machine
    or (those selected) even when the application is not running in
    the machine,
    can we use any scheduler or any such things in the server.
    Please do let me know
    Syam
    null

    Communication through files tends to fail if the
    program exits abnormally and leaves the file in a
    "running" state.If you store the pid the only way it fails is if the
    program exits abnormally and then another process
    starts up using the same pid as is stored in the file
    before you restart your application. Basically it is
    not likely to happen and if it does you just drop the
    pid file.The point is that Java programs can't, generally, handle signals. That's what the commons Daemon stuff provides.
    The standard way of stopping a unix background task is to use the stored pid to throw a "kill" at the process, whiich the process intercepts and does what you asked, e.g. close down tidily or reread it's configuration.
    Java knows nothing about process ids.

Maybe you are looking for

  • Strange Behaviour of Sender file CC

    Hello friends, I have configured sender communication channel.It is NFS CC without content conversion. I have mentioned the filename as abc*.txt. But when file with naming convention as xyz.txt was placed in the same folder.it got picked up by XI suc

  • Is it possible to download a DVD onto an iPod?

    I am trying to import DVD's onto my iPod touch...is this possible to do somehow?

  • IPhone 4S 64GB "Determining tracks to sync" problem

    Hello. I own an iPhone 4S 64GB and I have noticed that trying to sync new music beyond 20gb free space never syncs. I have had my iPhone 4S previously changed and the same problem existed then. I even did a fresh restore and again the same thing happ

  • About  FocusTraversal  in JList

    Hi all , I'm building up a mini dictionary ,I 've done the rest of my program and this is just an extra , when the user input the character "L" into the textfield then the List of word will point to the first word of all the words that consist "L" ,

  • Doc feeder not pulling paper through hp photosmart premium

    doc feeder not pulling paper through hp photosmart premium