Em database status currently unavailable

i tried opening my em but i keep having database status unavailabe.
I have set the oracle_sid also my 'emctl status dbconsole' is
I shut and started the database as well.
ok pls can you help
Message was edited by:
seyiisq

Let's troubleshoot it from the start.
a. Properly set all required environment
b. Verify your connectivity configuration, ip addres, naming, and make sure it is consistent with the original networking configuration, some localhost naming configuration issues have been reported.
1. Verify your database is up and running
2. Verify your listener is up and running
3. Ensure your database is already registered against your listener. (lsnrctl services) If you don't see you instance registered and it is configured for self-registration, wait for a while, it will not take more than 60 seconds to complete. If it takes longer and never registers a registration troubleshooting has to be performed.
4. start your enterprise manager
5. Retry access and report results of each phase.
~ Madrid.

Similar Messages

The database status is currently unavailable.

Hi,
I have a probem in my production database -
Server - Windows 2003
DB - Oracle 10g
When i try to open Enterprise Manager I get the below error message. This was working fine since last month. But I haven't made any changes to this DB. But I noticed that disk space was very less so I deleted files from recycle bin, temp internet files, cookies and some unwanted documents i copied on the server. No disc space is OK. I have 10 GB free space. Also i am getting DB warning notification because table space is 92 % full so I want to increase it. But I dont know why I am getting this because I had already set to grow table space automatically.
Is there any other way to increase table space other than that in Enter prise manager ?
Message:*
*"The database status is currently unavailable. It is possible that the database is in mount or nomount state...."*
I tried to troubleshoot as per some forums but it doesnt work. If i use command prompt or sql plus to connect to DB it works but only enterprise manager has this issue. Also my Documentum Application connected to this DB works fine.
listner is fine. Also I added server login account in 'log on as batch john' in local policies.
I do not have a back up to restore also.
Regards,
Ranjith John

Øyvind Isene wrote:
Regarding the tablespace you may consider extend it yourself and not wait for the autoextend to kick in. This way you avoid future problems if for some strange reason the datafile cannot be extended. Not ignoring this error and being reminded every time the tablespace reaches some limit gives you a feeling of how fast your data grows, which is useful (if the alert comes too often you have to increase with bigger chunks). Autoextend is a feature invented for the lazy dbas out there (imho), a responsible one should not rely on it for production systems with any serious load.
As for the connection problem from EM, I suspect the agent has a connection problem. Have you verified the username and password it is using? Can you connect to the db with the same combination?Yes, I can connect to DB with the same user name and password using command prompt or sql plus. Also my Documentum Application is connecting fine to this oracle DB.
This is the full message.
*"The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation.":*
Previously I used to get login page but now instead of login page I get this warning. There is also 'Startup' and 'Perform Recovery' button. Even if I use 'startup' button it does not resolve issue. It gives me the bellow message -
SQLException
ORA-28000: the account is locked
Startup/Shutdown:Confirmation
Current Status open
Operation shutdown immediate
Are you sure you want to perform this operation?
I used this to unlock my oracle user yesterday
SQL> alter user username identified by password account unlock;
Regards,
Ranjith john

Database status is currently unavailable

hi!
the web-based 10g OEM of our database displays "database status is currently unavailable" upon login as sysdba. but the database instance has already been started/opened. could it be because of the "UNKNOWN" status in my listener? if yes, what are things should i look for to solve this problem? thank you very much.
Services Summary...
Service "bdsprod" has 1 instance(s).
Instance "bdsprod", status UNKNOWN, has 1 handler(s) for this service...

Click on the performance tab, does it prompt for userid/password. If so its the credentials to check the db.
Also check the oracle home that OEM thinks your db is at, sometimes it gets messed up.

Database is UP- But OEM says DATABASE status is currently unavailable

If anybody can help me why this message occurs when i open oem. although the database is up and running and i am making changes to it through sqlplus

well guys
i check SYSMAN & DBSNMP accounts in dba_users and i'm sure thier account_status r open but i still got the same message i delete the ORCL database and recreate it again but i got another prb the EM open but the database status in home page is DOWN i have 10g R1 so i hope i can find a soltion with u
by the way this prb happen coz of changing
ip
computer name
puting the computer in a network or domain
i hope i can find help here
urs
Yasser

Database status shows as currently unavilable

I m monitoring a 11g db using a10gr5 agent
When I go to db home page,it shows a message target is currently unavailable.
Database is up and i m able to connect.
Any clue???

Hi,
It can be due to mismatch in status between agent and OMS.
goto agent_home/bin and execute
./emctl status agent target db-name,oracle_database
If you find any difference in status then do a clearstate while agent is up
./emctl clearstate agent

Current database status does not match sitemap page

After I had to drop and recreate an 10g instance the OEM Home tab displays Status Pending. The instance, however, is available and all other OEM functions like Performance, Installation, and Maintenance work fine.
If I try to shutdown the instance the I get this message in the Startup/Shutdown:Confirmation screen :
Current Status open
This is the correct current database status, although it doesn't match the current status in the sitemap page.
Stopping and starting the instance through OEM did not change this condition.
How do you get OEM to update the status to what it knows it correct instead of what is stored in the sitemap page?

Ok, I did that many times already. The command is 'emctl stop dbconsole' and 'enctl start dbconcole'. OEM still thinks the instance is Pending.
Becasue of this and other problems with this instance I am going to cut my losses and uninstall 10.1 then reinstall 10.2 this weekend.
For example, I am now getting messages like this on Startup and the database will not Open:
ORA-04030: out of process memory when trying to allocate 41987820 bytes (pga
heap,KCL disk IO request block array)
If I allocate much LESS memory to SGA and PGA and then Startup the instance comes right up.
Thanks for you help.

Database Home page display : The database target is currently unavailable

Hello,
I Installed OEM Gird 11g on an Windows 2008 R2
version Installed :
- Oracle Enterprise Manager Grid Console 11.1.0.1.0
- WebLogic Platform 10.3.2.0
- Oracle WebTier and Utilities CD 11.1.1.2.0
To make it running I have to disable IPV6 !
One the database server (Windows 2003 64 bit - Oracle 10.2.0.1.0) I have upgraded the agent to the version Oracle Management Agent 11.1.0.1.0.
I am able to configure a database (dbsnmp/password) no connection issue
But after that the home display the message (The database target is currently unavailable), like the agent is not able to connect to the database.
The database is accessible through the link "Last Known State".
I have try stop and restart the agent in the database.
I also test to make a clearstate (emctl clearstate agent), without success.
I go deeper in the log of the agent (emagent.trc) :
LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ora-secondary1.lgbow.com)(PORT=1521))(CONNECT_DATA=(SID=LGBPHTE2)))
+2011-08-30 11:28:10,341 Thread-2284 ERROR vpxoci: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor+
+2011-08-30 11:28:10,341 Thread-2284 WARN recvlets.aq: [oracle_database LGBPHTE2] login failed: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor+
+2011-08-30 11:32:50,917 Thread-2236 WARN vpxoci: OCI Error -- ErrorCode(1219): ORA-01219: database not open: queries allowed on fixed tables/views only+
I have tested the LGBPHTE2 tnsname with SQLPLUS it is working.
It is like OEM Grid 11g is not able to give the right password to the agent.
Anyone knows about this issue.
Thanks in advance
Gaspard

LOGIN = dbsnmp/<PW>@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ora-secondary1.lgbow.com)(PORT=1521))(CONNECT_DATA=(SID=LGBPHTE2)))
+2011-08-30 11:28:10,341 Thread-2284 ERROR vpxoci: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor+
+2011-08-30 11:28:10,341 Thread-2284 WARN recvlets.aq: [oracle_database LGBPHTE2] login failed: ORA-12505: TNS:listener does not currently know of SID given in connect descriptor+ is the database accessible through this address?
sqlplus user/[email protected]/LGBPHTE2
+2011-08-30 11:32:50,917 Thread-2236 WARN vpxoci: OCI Error -- ErrorCode(1219): ORA-01219: database not open: queries allowed on fixed tables/views only+ is the database open?

HTTP Status 503 - Servlet action is currently unavailable

Hai,
I'm developing a Struts application, where the control be forwarded to an Action class, I used globalforwards, as shown
<code>
<global-forwards>
<forward
name="Welcome"
path="/Welcome"/>
</global-forwards>
</code>
<code>
<action
path="/Welcome.do"
type="WelcomeAction"
scope="session"
<forward name="success" path="/Login.jsp" />
</action>
</code>
I've deployed the application, when run the program I got the following error
HTTP Status 503 - Servlet action is currently unavailable
type Status report
message Servlet action is currently unavailable
description The requested service (Servlet action is currently unavailable) is not currently available.
Please help me ...

503 Service Unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a
server must use it when becoming overloaded. Some servers may wish
to simply refuse the connection.

Error in XI senario: The requested application,AFW,is currently unavailable

Hi Forum,
In a scenario, I have a BPM, which makes a synchronous call to R/3 for execution of a rfc enabled Function module, while doing so, it gives an error as a response, which i can see in the MONI:
503 Service Unavailable
The requested application, AFW, is currently unavailable.
The same error is also thrown when the BPM makes a asynchronous connection to a database,
can u help in diagnosing the problem, and help in rectifying it,
thanks

Hi
Just a check with this error
8) Error: The error message 503 Service unavailable Application stopped! is displayed.
Description:The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655

EM gives wrong database status.

Hi!
EM is giving me this status:
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation.
While,I can see from SQL plus as a sysdba from v$instance that the database staus is open.
I try to startup the database from EM,but it throws an SQL exception and tells me to shutdown the database.
I say yes.
I get an error: Premature EOF encountered, no trailer found
And the database status is still unavailable.Can anyone help me on this?Thanks.

Check previous posts on the same topic. You never mentioned the O/S either.

Database Status report.

Hi Export,
Currently i joined a company as a Oracle Dba. i am new to DBA world, My manager told me to prepare a database status report. Please suggest me how can i create the report.
Regards...
Asmit

EdStevens wrote:
marksmithusa wrote:
That's an awesome idea - just one problem.
If it's tall enough for all to see, this also includes management and if they notice the chicken, your cube will be instantly surrounded by various management types asking 'when will it be back up?'
You're, almost literally, hoisting yourself with your own petard.True, but I think he had the understanding with mgmt that if the chicken was up, they'd best leave him alone until the chicken came down.Wow. I'm actually stunned - I didn't think that was possible within the physical laws of the universe that we occupy.
He achieved 'DBA Hero' status.

Currently Unavailable Message for a Single Channel

Has anyone had this issue with a single channel? The new FSC HD (584) that just came out last week worked for 1/2 a day then it started showing Currently Unavailable. I had a technician out a few days later and he checked signal strength, changed all the connections at the splitter on every line and the channel started to show up again. Two days later it went back to Currently Unavailable.   After 2 hours on the phone, an hour tech visit, an hour on online chat, researching all I could, etc. they have no clue what to do and now I have to wait for a technician to come out again in 7 days!!!!!   Gotta love Verizon!
I can't believe that there is no record of another customer having this issue in their tech support databases and someone can tell me something other than unplug the connection and plug it back in.
Solved!
Go to Solution.

The technician changed out all of the connections into and out of the splitter. We also reconnected everything along with way (at the router, to the TVs and from the wall plates, etc.).   It worked fine for a day or two then went out again on all of the TVs. Then this morning the channel is appearing again (without doing anything), but it's just a matter of time until it goes out again.   My question is I could understand a connection issue if it were all of the HD channels, but why on just this one (the newest one released about a week ago, doesn't happen on the previously released HD channel BET).

Portal Error when starting jcontrol.EXE (Status info unavailable)

Hi All
I am trying to start the J2EE Engine and keep getting this message in the Developer Trace. The jcontrol.EXE status is 'status info unavailable'.
I have changed the Administrator password in the Admin tool but still no joy.
Any ideas?
Ihave attached the trace below!
[Thr 1156] JControlICheckProcessList: process server0 started (PID:11120)
JControlStartJLaunch: program = E:\usr\sap\EPD\JC04\exe\jlaunch.exe
-> arg[00] = E:\usr\sap\EPD\JC04\exe\jlaunch.exe
-> arg[01] = pf=E:\usr\sap\EPD\SYS\profile\EPD_JC04_perth
-> arg[02] = -DSAPINFO=EPD_04_sdm
-> arg[03] = -nodeId=2
-> arg[04] = -file=E:\usr\sap\EPD\JC04\SDM\program\config\sdm_jstartup.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_10440
-> arg[06] = -nodeName=sdm
-> arg[07] = -jvmOutFile=E:\usr\sap\EPD\JC04\work\jvm_sdm.out
-> arg[08] = -stdOutFile=E:\usr\sap\EPD\JC04\work\std_sdm.out
-> arg[09] = -locOutFile=E:\usr\sap\EPD\JC04\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=E:\usr\sap\EPD\SYS\profile\EPD_JC04_perth
-> lib path = PATH=C:\j2sdk1.4.2_13\jre\bin\server;C:\j2sdk1.4.2_13\jre\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;E:\usr\sap\EPD\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_13\bin;E:\usr\sap\EPD\JC04\j2ee\os_libs;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;E:\usr\sap\EPD\SYS\exe\uc\NTI386
[Thr 1156] JControlICheckProcessList: process SDM started (PID:5852)
[Thr 1156] JControlMSSendLogon: delete SDM logon information (rc=0)
[Thr 1156] Thu Jan 29 11:55:48 2009
[Thr 1156] JControlMSSendLogon: insert SDM logon information (port=50418; rc=0)

J2EE Database is not available via test
See logfile JdbcCon.log
Please see the log file.If it says password expired .Please change the password for the schema user of J2ee database.In my case the user is sapdbqx1 and after resetiing the apssword it worked fine.
Also onetime for annother system in XI Landscpe I had same issue.
Solution: The listener file should have both logical hostname as well as physical host name entry.Then its worked.
Sudhakar

J2EE Status info unavailable after upgrade in NW2004s

Hi
I was upgrading the BI server. (AS ABAP, AS JAVA, BI-JAVA and EP)
of NW2004s from SP06 - SP09
The uprade went on well but anow after rebooting the server I dont see any J2EE processes running. In SAP MMC, next to the process disp+work.EXE the status is Running, Message Server connection ok, dialog queue time 0.0 sec, J2EE Status info unavailable
The Dev trace file is as follows
trc file: "G:\usr\sap\SID\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name   : jcontrol
pid         : 7084
system name : SID
system nr. : 01
started at : Tue Jan 09 16:43:35 2007
arguments       :
       arg[00] : G:\usr\sap\SID\DVEBMGS01\exe\jcontrol.EXE
       arg[01] : pf=G:\usr\sap\SID\SYS\profile\SID_DVEBMGS01_hostname
       arg[02] : -DSAPSTART=1
       arg[03] : -DCONNECT_PORT=3055
       arg[04] : -DSAPSYSTEM=01
       arg[05] : -DSAPSYSTEMNAME=SID
       arg[06] : -DSAPMYNAME=hostname_SID_01
       arg[07] : -DSAPPROFILE=G:\usr\sap\SID\SYS\profile\SID_DVEBMGS01_hostname
       arg[08] : -DFRFC_FALLBACK=ON
       arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 5656] Tue Jan 09 16:43:35 2007
[Thr 5656] *** WARNING => INFO: Unknown property [instance.box.number=SIDDVEBMGS01hostname] [jstartxx.c   841]
[Thr 5656] *** WARNING => INFO: Unknown property [instance.en.host=hostname] [jstartxx.c   841]
[Thr 5656] *** WARNING => INFO: Unknown property [instance.en.port=3200] [jstartxx.c   841]
[Thr 5656] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c   841]
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties;G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host    : hostname
-> ms port    : 3900
-> OS libs    : G:\usr\sap\SID\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Used property files
-> files [00] : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host    : hostname
-> ms port    : 3900
-> os libs    : G:\usr\sap\SID\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode   : normal
-> run action : NONE
-> enabled    : yes
Bootstrap nodes
-> [00] bootstrap            : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID18529600 : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID18529650 : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID18529600           : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID18529650           : G:\usr\sap\SID\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm                  : G:\usr\sap\SID\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 5656] *** WARNING => JsfOpenShm: ShmCreate (69, 312160, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c   715]
[Thr 5656] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c   761]
[Thr 5656] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c    1714]
[Thr 5656] *** ERROR => Can't initialize JControl Administration [jcntrxx.c    271]
[Thr 5656] JControlCloseProgram: started (exitcode = -1)
[Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c   1243]
[Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c   1250]
[Thr 5656] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c   1257]
[Thr 5656] JControlCloseProgram: good bye... (exitcode = -1)
Thanks for your help
Regards
SM

Dear all,
We are setting up Diaster recover (DR ) where we are doing the mirror copy of the Source System to Target System.
After mounting all the files in Target DR System, i made the following changes in Target System.
OS: AIX
Dual stack System(ABAP +JAVA)
Instance number used :
00--ASCS00
02-- DVEBMGS02
01--SCS01
03--D03 --------------------------------------------------------------------------> It is maintained in another DR Server
Database Used: Oracle
a)renamed the Profiles (/usr/sap/KBP/SYS/profile).
b)Changed the dbenv files (/home/kbpadm) and (/home/orakbp)
c)set right permissions in all files and folders in /usr/sap.
d)Oracle is running and DB is also up
e)Started the profiles using sapcpe
e)After switching user (sidadm), Started the SAP Applications and SAP applications are up.
When i checked the GetProcess list according to instance wise, i am getting below output.
kbpadm> sapcontrol -nr 02 -function GetProcessList
31.07.2013 13:16:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
disp+work, Dispatcher, YELLOW, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable, 2013 07 31 11:26:41, 1:50:14, 14549078
rslgcoll, Central Syslog Collector, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11141296
rslgsend, Central Syslog Sender, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11862158
igswd_mt, IGS Watchdog, GRAY, Stopped, , , 13631708.
kbpadm> sapcontrol -nr 01 -function GetProcessList
31.07.2013 14:41:22
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2013 07 31 11:25:53, 3:15:29, 14614568
enserver, EnqueueServer, GRAY, Stopped, , , 14483586
kbpadm> sapcontrol -nr 00 -function GetProcessList
31.07.2013 14:41:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2013 07 31 11:26:17, 3:15:38, 10879188
enserver, EnqueueServer, GRAY, Stopped, , , 13041698
J2EE is not coming up. ALSO plz tel where to update 'system/type' .
There is a warning msg :
J2ee Startup: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance
Server0 is not running.
Kindly Assist.
Regards.
Gayathri.K

J2EE Status info unavailable disp+work.exe

Hi Experts,
I have an critical error in our NW2004s. i installed a dualstack abapjava epcore and ep. the installation was succesfull. But till last week i have the error with the java part. It would not come up. message of dispwork.exe: running, message serverconnection ok, dialog queue time: 0.00sec. j2ee status info unavailable.
under j2ee process table is the message : no items to show.
dev_disp: DpJ2eeStart: j2ee state = STARTED
any ideas??
Regards
Eimal

Dear all,
Even i am also facing same problem.
We are setting up Diaster recover (DR ) where we are doing the mirror copy of the Source System to Target System.
After mounting all the files in Target DR System, i made the following changes in Target System.
OS: AIX
Dual stack System(ABAP +JAVA)
Instance number used :
00--ASCS00
02-- DVEBMGS02
01--SCS01
03--D03 --------------------------------------------------------------------------> It is maintained in another DR Server
Database Used: Oracle
a)renamed the Profiles (/usr/sap/KBP/SYS/profile).
b)Changed the dbenv files (/home/kbpadm) and (/home/orakbp)
c)set right permissions in all files and folders in /usr/sap.
d)Oracle is running and DB is also up
e)Started the profiles using sapcpe
e)After switching user (sidadm), Started the SAP Applications and SAP applications are up.
When i checked the GetProcess list according to instance wise, i am getting below output.
kbpadm> sapcontrol -nr 02 -function GetProcessList
31.07.2013 13:16:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
disp+work, Dispatcher, YELLOW, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, J2EE status info unavailable, 2013 07 31 11:26:41, 1:50:14, 14549078
rslgcoll, Central Syslog Collector, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11141296
rslgsend, Central Syslog Sender, GREEN, Running, 2013 07 31 11:26:41, 1:50:14, 11862158
igswd_mt, IGS Watchdog, GRAY, Stopped, , , 13631708.
kbpadm> sapcontrol -nr 01 -function GetProcessList
31.07.2013 14:41:22
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2013 07 31 11:25:53, 3:15:29, 14614568
enserver, EnqueueServer, GRAY, Stopped, , , 14483586
kbpadm> sapcontrol -nr 00 -function GetProcessList
31.07.2013 14:41:55
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2013 07 31 11:26:17, 3:15:38, 10879188
enserver, EnqueueServer, GRAY, Stopped, , , 13041698
J2EE is not coming up. ALSO plz tel where to update 'system/type' .
There is a warning msg :
J2ee Startup: profile parameter 'system/type' not correctly set to start J2EE; use 'J2EE' for Java only and 'DS' for double stack instance
Server0 is not running.
Kindly Assist.
Regards.
Gayathri.K

Em database status currently unavailable

Similar Messages

Maybe you are looking for