EM DB console works only from one node?

In my 2 node RAC the enterprise manager database console works only from one node i.e the url shows login page only from one node.
http://NODE2:5500/em------>WORKS, SHOWS LOGIN PAGE AND CAN MANAGE ALL INSTANCES FROM HERE
http://NODE1:5500/em------>DOES NOT WORK, DOES NOT SHOW THE LOGIN PAGE.
Please clarify.
Kadhim

I have to guess ... (because you tell neither OS nor database version). Assuming it's 10gR2 or higher, that's expected behaviour, dbconsole runs on one node only, the so-called master node. You can change that, see the documentation or this metalink note:
How to manage DB Control 10.2 for RAC Database with emca
Doc ID: NOTE:395162.1
Werner

Similar Messages

Ichat video not working only to one person

I've read most of the post on "i chat not working"; but has anyone had it to not work only to one individual. This is my case. I can video i chat with my son in FWB FL. with no problem. He has an Apple also. I can take my laptop to his location and video i chat with my sister-in-law in Jefferson Ga. But, I cannot video i chat with my sister-in-law from my location, Valrico, Fl. to her location in Jefferson Ga. I have had a 3 way phone conversation going with Apple, My internet provider and her internet provider and no one can solve the problem. Does anyone have any assistance they can provide. I'm not computer savy; so be patient and go slow and detail with me; thanks. Norm

More often than not this is about the way a modem or router or combo at either end use NAT.
NAT is Network Address Translation.
It is the way a device shares an Internet connection with several devices/computers.
However NAT means different things to different devices and not all devices therefore are doing what is called NAT the same way.
See here for further mind boggling
So what you may have is a device at either end that does not or will not play nicely with another device.
This can be particularly the case if the device has to use Port Forwarding or Port Triggering or is using the DMZ to open ports.
Using UPnP reduces the problem in many cases.
http://www.ralphjohns.co.uk/page15.html#CertainBuddy
Telling us what devices in the way of Modems and routers each end is using may help us pint to what can be changed.
Makes and models please with what they are doing to open the ports for iChat.
As Defcom has pointed out with certain connection it can be the Speed difference in the Internet connection both up and down that can be a factor.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:58 PM Monday; April 28, 2008

How to failover SCAN VIP and SCAN Listener from one node to another?

Environment:
O.S : HP-UX B.11.31 U ia64
RDBMS: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
It is a 2 Node RAC.
Question:
How to failover the SCAN VIP and SCAN LISTENER running on node 1 to node 2?
What is the relation between standard LISTENER and SCAN LISTENER ?
Why do we need LISTENER, when we have SCAN LISTENER ?
When I tried with SRCVTL STOP LISTENER , I thought the SCAN LISTENER adn SCAN IP will failover, but it did not?
Also please clarify if I use SRVCTL RELOCATE SCAN -i 1 -n Node1
Actalluy I am trying that by moving the SCAN listeners so that when I do PSU 7 patching on 1 node, no incoming attempt to connect will spawn
a process and thereby opening files in $ORACLE_HOME (which would prevent the patch from occurring)
Please clarify my queries.
Thanks, Sivaprasad.S

Hi Sivaprasad,
1. The following link will help you for SCAN VIP and SCAN LISTENER failover from 1 node to another.
http://heliosguneserol.wordpress.com/2012/10/19/how-to-relocate-scan_listener-from-one-node-to-another-node-on-rac-system/
http://oracledbabay.blogspot.co.uk/2013/05/steps-to-change-scan-ip-address-in.html
2. The Standard LISTENER is specific for particular node for which it is running. It cannot be relocated as its specific for the node its running. SCAN listeners are not replacements for the node listeners.A new set of cluster processes called scan listeners will run on three nodes in a cluster (or all nodes if there are less than 3). If you have more than three nodes, regardless of the number of nodes you have, there will be at most three scan listeners. So no relation for standard LISTENER and SCAN LISTENER.
3. Hmmm. let me put it in easy way for this question. All the RAC services like, asm, db , services, nodeapps registers with this SCAN_LISTENER. So if any of these services (asm, db , services, nodeapps) got down/not running, the SCAN_LISTENER will know the down status, and if any client requests to access the node/service which is down, the SCAN_LISTENER will redirect the client request to the least loaded node. So here all these process will happen without the knowledge of client. And As usual the standard LISTENER looks only for incoming request to connect with the database. So we need both LISTENER and SCAN LISTENER.
4. If you provide SRCVTL STOP LISTENER, it stops the default listener on the specified node_name, or the listeners represented in a given list of listener names, that are registered with Oracle Clusterware on the given node. No failover will happen under this case.
5. Yes you can relocate if you want to relocate the scan.
Hope this helps!!
Regards,
Pradeep. V

Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
When I select many nodes in tree, but I only get one node by method: selectedNodes.
codes of created tree as following:
<mm:treecontrol name='tree' size='20' multiple noheaders>
     <mm:treecolumn state='hidden'>
          <mm:treenode value='A' state='expanded'></mm:treenode>
          <mm:treenode value='B' state='expanded'></mm:treenode>
          <mm:treenode value='C' state='expanded'></mm:treenode>
</mm:treecontrol>
Who can tell me reasons?
Thanks!
comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

Hi macbig,
I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
up files.
Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
The volume Macintosh HD was found corrupted and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk
I guess running Apple Hardware Test is not going to happen. :/
I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
Thank you so much!

Datafile is not accesable from One NODE

Hi All,
We have two node cluster RAC we are able to access the datafile from one node from another node getting error like..
ERROR:
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: '/dev/md/racgcp/rdsk/d548'
If we offline the TS the error is not appearing...!
And we tried to drop but its hanging..
Please Suggest
Thanks.

ERROR:
ORA-01157: cannot identify/lock data file 6 - see DBWR trace file
ORA-01110: data file 6: '/dev/md/racgcp/rdsk/d548'Hi,
is this visible in the first node ?
What is the output of
select name from v$datafile where name like '%dev/md/racgcp/rdsk/d548%';Might you have given wrong file name, give the file_id instead of name. Post if any errors.
Celero,
It is tipical when you have created a tablespace using local node storage instead of the shared storage used by the RAC. Then, it will be only visible from the node it was created.In RAC database datafiles in shared loacation, if you configure tablespace using local node how can you say it as RAC... can you please describe your views more.
Thanks

How to drag and drop user from one node to other node.

Dear All,
How to drag and drop user from one node to other node.I tried but no success.
What are precautions to be taken.
Cay anybody kindly explain it.
Thank you.

Hello, if you had this message you had created BP....
Now you don't have to user USERS_GEN this transaction is used only in first action, when you create the user in R/3 and then you pass this user to EBP in the organizational structure.
Now you have to:
1) Go to PPOMA_BBP
2) Double click on organizational unit that you want to put this user (purchasing organization or purchasing group box for example)
3) Select assign button in the top of the functions in the transaction
4) Click on incorporates -- position
5) Put userID that you want to add in this organizational unit
6) Click Save
Thanks
Rosa

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck!

HT4623 My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

My iPhone 4S speaker suddently doesn't work properly from one week ago? How I can do? 4s is still under warranty?

Have you tried any troubleshooting steps, like resetting you iPhone, for example? Or restoring it?
If not by all means do so because your problem could be caused by software glitches that could be solved resetting or restoring.
Warranty is for one year from date of purchase and two years if you bought Apple Care at the time of purchase. If your iPhone has a hardware issue within warranty, it would be replaced by Apple. If it is already out of warranty, you might be eligible for an out of warranty replacement where you pay a much lower amount but this varies according to the country and currency, so it is better to check with Apple or with an authorized reseller.
You could check your warranty status here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do

Move OMS repository from one node to another&configure agents.OEM10.2.0.4

Hi experts,
I explain:
my environment has two nodes:
nodeA and nodeB (OSLINUX 64BITS)
nodeA+nodeB has a database, DB1, that is a OracleRAC between these two nodes.
OMS is installed on this database.
I want to move repository,OMS in a third node, separately from these two, and migrate database repository to this third node.
II have checked note. 382698.1
How to move OMS repository from one node to another - Step-by-Step guide.
but my version is 10.2.0.4 (not 9i) and in this note don explain how modify file AGENT_HOME>/sysman/config/emd.properties.
Can you help me, please?
Thank you for your time.
JRC

Once you move the repository, go to each agent and do this:
1) Stop agent and cleanup the status, etc...
cd <AGENT_HOME>
bin/emctl stop agent
rm -r ./sysman/emd/state/*
rm -r ./sysman/emd/upload/*
rm -r ./sysman/emd/collection/*
rm ./sysman/emd/lastupld.xml
rm ./sysman/emd/agntstmp.txt
rm ./sysman/emd/blackouts.xml
rm ./sysman/emd/protocol.ini2) Then edit the $AH/sysman/confiig/emd.properties with your new data (host:port):
REPOSITORY_URL=https://newhost.domain.com:1159/em/upload
emdWalletSrcUrl=http://newhost.domain.com:4889/em/wallets/emd3) And finally start the agent:
$AH/bin/emctl start agent
$AH/bin/emctl upload:p
PS: And be patient, it may take up to 30 minutes to re-sync with the new OMS.
+

How can i add selected element from one node to other node

Hi All
I have below requirement.
Say In the view leftside Available Languages ItemList Box Rightside Available Languages ItemList Box and Add & Remove Buttons in the middle.
User selects languages from Available Languages ItemList Box clicks on add it will adds to the Available Languages Item List box and ViceVersa with Remove Button.
1) I have created 2 nodes 1) AvlLang 2) SelLang both contains two attributes Key and Value.
2) For AvlLang node, Property : Data Dictonary binded with table. Values are coming fine in Available Languages ItemList Box.
3) How can i add selected language into the node Available Languages.
Please provide the code snippet how to achieve this.
BR
X- CW

Hi Carlin,
Find below code to copy selected record from one node to another.
Here I am copying it_lips node into pack_mat node.
DATA: wa_temp TYPE REF TO if_wd_context_element,
            lt_temp TYPE wdr_context_element_set,
            count type c.
      DATA : lo_nd_it_lips TYPE REF TO if_wd_context_node,
             lo_el_it_lips TYPE REF TO if_wd_context_element,
             ls_it_lips TYPE wd_this->Element_it_lips,
             lt_it_lips TYPE wd_this->Elements_it_lips,
             ls_unpack TYPE wd_this->Element_unpack,
             lt_unpack TYPE wd_this->Elements_unpack.
* navigate from <CONTEXT> to <IT_LIPS> via lead selection
      lo_nd_it_lips = wd_context->path_get_node( path = `ZRETURN_DEL_CHANGE.CHANGING_3.IT_LIPS` ).
      CALL METHOD lo_nd_it_lips->get_selected_elements
        RECEIVING
          set = lt_temp.
* navigate from <CONTEXT> to <PACK_MAT> via lead selection
      lo_nd_pack_mat = wd_context->get_child_node( name = wd_this->wdctx_pack_mat ).
      LOOP AT lt_temp INTO wa_temp.
        CALL METHOD wa_temp->get_static_attributes
          IMPORTING
            static_attributes = ls_it_lips.
              ls_pack_mat-vgbel = ls_it_lips-vgbel.
              ls_pack_mat-vgpos = ls_it_lips-vgpos.
              append ls_pack_mat to lt_pack_mat.
              CLEAR ls_pack_mat.
      endloop.
        lo_nd_pack_mat->bind_table( new_items = LT_PACK_MAT
                                    SET_INITIAL_ELEMENTS = abap_true ).
Cheers,
Kris.

How to transfer work items from one user's inbox to other user,s inbox(UWL)

Hello All
We need to transfer existing but open work items from one user's inbox to other user,s inbox(UWL)
How to go about it?
These are the items from backend R3.
Thanking you
Rajendra

Hi Rajendra,
Usually in R/3 if you want to transfer the workitems to other user , you can just select the workitem and then click on "Forward" button. This will pop-up a box to enter the "User" ID of the other user to whome you want to transfer the Workitem. A Similar button is available in UWL as well.
So, in UWL when you click on the Workitem, it will should give you a button "Forward" and by clicking on that you should be able to transfer the workitem you the other user.
I hope this helps you. Let me know if you need any more help.
Regards,
Gopal.

Drill and Navifgate only from leaf node

Hi
I have implemented level based hierarchy for my dimension. I want to navigate to another report only from the leaf node of the hierarchy.
Can you please let me know how can this be achieved? How can i identify the leaf node in a level based hierarchy

This is not a duplicate of the item mentioned. With one I have a node anywhere in the tree and need to walk up to find the parent. In this one, I have the parent and need to delete leaf nodes up to this parent. I each one I have a different set of constraints and different ids to work with. Thanks for your help.

Migration of Work Items from one system to another

Dear Experts,
We are migrating an application from one system to other and it involves BI, Webdynpro, BSP and workflow. This is mainly a portal application which involves BI as the backend. While migrating the application with the existing data we also require to migrate the open Work items of the Users.
Can anyone help us in migrating the Work Items or the possibilities of doing the same.
Useful suggestions will be appreciated.
Thanks,
Prabhakar M

Hi All,
Am opening this thread again.
Using Transaction SWW_SARA I have Archived the Completed and Cancelled workitems in one Production system(For Ref, P1) and it got stored as a File in the Application Server.
But while I tried to view the archived workitems via the same Transaction I can see only the header of the Workitem and not the detailed information of the same.
Is this the only method to view the archived Workitem or any other way is available to view the detailed Information. Also is it possible to transfer the archived file to another Production system and view the workitems?
Please help me in finding the solution for above scenario.
Regards,
Prabhakar

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

EM DB console works only from one node?

Similar Messages

Maybe you are looking for