EM for two instances

hello gurus,
could somebody explain me, please, how to run the EM, where are two instances? I mean, what i have to do to switch EM between two instances?
sorry, if this is a stupid question, i'm only the beginner.
thank you again.
M

thank you, Mohammad Taj, i surmised that there must be a way without using the grid, but tried to install it anyway.
and now, that is the error, that arises in the middle of installation, on the Specify Repository Configuration step:
"Exception occured while connecting to database. Please check the connection details of the database you specified and retry. Bad packet type."
the "Prefill tablespace locations" button doesn't work also. i'm absolutely sure about the specified details (database hostname, port, service/SID, syspassword), but still can't advance.
BTW, thank you again, both OEM work fine on one machine^
C:\Documents and Settings\Dmitry>set ORACLE_SID=catalog
C:\Documents and Settings\Dmitry>emctl start dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://DIGHOME:5501/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsolecatalog service is starting..
The OracleDBConsolecatalog service was started successfully.
C:\Documents and Settings\Dmitry>set ORACLE_SID=recovery
C:\Documents and Settings\Dmitry>emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.1.0.2.0
Copyright (c) 1996, 2004 Oracle Corporation. All rights reserved.
http://DIGHOME:5500/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory C:\oracle\product\10.1.0\db_1/DIGHOME_recovery/sysman/log
thank you again.
Maria.

Similar Messages

One instance for two different application

Hello,
I have to solve following problem..
need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
I would like to do this without database..only server and web app..
I have thought about RMI..but hope there is more simple solution..
Thanks a lot for your ideas.
Dmitrij

I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Two earlywatch reports for same instance in one Solution manager

Hi
i am trying to create two solutons for early watch reports for same instance. let me explain here.
In SAP Solution Manager: Active Solutions >>> i have two solutions like this
Solution                                                          Early Watch Alert Reports
Avnet Global Solutions         >>>> here i have configured the PR1, PB1 PCB instances
PR1                                      >>>>>here i configured the only PR1 instance.
so i have configured the same instance in two solutions.
i am not gettting the early watch report automatically after after configuring like this . but manually working fine.
when i kick of the report manually working fine.
here my question is ... do i can create two early watch reports in one solution manage for same instance or not. if yes then why i am not getting report automatically.
Thank you
Vish

Dear Paul,
Thank you for your response
this is what i got from SAP.
Hello Vish,
You can have the same system in different solutions. With regards
to why the report is not generating automatically, please review
SDCCN on the satellite system.
I dialed into the system and found that the SDCCN for PB1 is not
downloading the sessions from Solution Manager.
I would recommend that you deactivate and then activate SDCCN.
Tcode SDCCN -> GoTo - Settings - Task Processor - Deactivate
Tcode SDCCN ->Utilities -> Activate
Then create a Refresh Session task and verify if the upcoming sessions
are getting pulled down to PB1.
If you need help with this, please let me know if it is fine with you
if I make the necessary changes to get the system working.
Thank you in advance and best regards,
Jared Singh
SAP Active Global Support - Netweaver Web Application Server
could i know your comment

Two sids for One instance

Hi All,
I have to create two sids for one database. I am using Oracle 9i on Windows machine as well as linux machine. Is there any possible to assign two sid's for one database.
Give me the suggestions...
Cheers,
Moorthy.GS

I think you need to define your term 'database' here
In Oracle world, database is usually referred to as instance.
a SID is one database instance, that's why, people will tell you that you can't have two SID for one database (instance)
However, if your 'database' means the schema and data, then yes, you can run two instances (with two SID of course) to host the same schema and data.

Listener - Two Services for Each Instance

Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.

910492 wrote:
Oracle 11r2g was installed on a Linux SO. Everything is working, but when I check the Listener Services I got this status:
lsnrctl services
Service "S060" has 1 instance(s).
Instance "S060", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:86 refused:0
LOCAL SERVER
Service "S060.domain" has 1 instance(s).
Instance "S060", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1289 refused:0 state:ready
LOCAL SERVER
There are Two Services for Each Instance. Is it normal or do I have to check anything else?
Thanks in advance.Pretty normal. The "unknown" is the static registration coming from the SID_LIST entry in the listener.ora file. The "ready" is the dynamic registration from the db instance itself.

Two instances of Firefox open when I click on a link within my email client. How can I stop this from happening?

I am running on an iMac OS X 10.6.3 using Firefox 3.6.3 as my default browser and I use Postbox 1.1.5 as my email client. Anytime I click on a link within an email message two instances of Firefox open, one with my home page and one with the site the link was meant for. This happens only when Firefox is not already open. If Firefox is running and a link is clicked on it opens normally within the open instance of Firefox. I have contacted Postbox and am currently awaiting a response to see if they have any suggestions. While this is not a serious issue it is a bit annoying. I have Firefox set to open new links in tabs not new instances of windows, so it shouldn't be that. Any help in getting this to stop would be greatly appreciated.
== This happened ==
Every time Firefox opened
== Not sure, it's been going on for quite awhile.

That is a bug on Mac.
See https://bugzilla.mozilla.org/show_bug.cgi?id=531552 - Firefox 3.6b opens two windows when opening external links
''(please do not comment in bug reports to avoid bug spam for the devs)''

BI server generating query in a different way between two instances

Hi All,
We have executed a report in dev,test instances,BI server generated query in a different way in two instances where as dev BI server is on AIX operating system(recently we migrated from windows),test instance is on still on Windows environment.
For a report below are the queries
DEV(AIX)
WITH
SAWITH0 AS (select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end )
select distinct SAWITH0.c2 as c1,
SAWITH0.c3 as c2,
SAWITH0.c4 as c3,
SAWITH0.c5 as c4,
SAWITH0.c5 as c5,
SAWITH0.c6 as c6,
SAWITH0.c7 as c7,
SAWITH0.c1 as c8
from
SAWITH0
order by c1, c6
Test(Windows)
select distinct D1.c2 as c1,
D1.c3 as c2,
D1.c4 as c3,
D1.c5 as c4,
D1.c5 as c5,
D1.c6 as c6,
D1.c7 as c7,
D1.c1 as c8
from
(select sum(T316025.SALES_QUOTA) as c1,
T329697.DIVISION_DESC as c2,
T329697.AREA_DESC as c3,
T329697.TERRITORY_DESC as c4,
case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end as c5,
T150993.X_CONS_MAJOR_GROUP as c6,
T66755.PER_NAME_ENT_YEAR as c7
from
W_DAY_D T66755 /* Dim_W_DAY_D_Common */ ,
W_PRODUCT_D T67704 /* Dim_W_PRODUCT_D */ ,
WC_SLX_DATA_F T316025 /* Fact_WC_SLX_DATA_F */ ,
WC_CUSTOMER_HIERARCHY_D T329697 /* Dim_WC_Customer_Hierarchy_D_With_Error */ ,
OBIEE_SECURITY_LOCATION_SALES T339204,
W_PROD_CAT_DH T150993 /* Dim_W_PROD_CAT_DH_General */
where ( T66755.ROW_WID = T316025.DAY_WID and T316025.CUSTOMER_HIERARCHY_WID = T329697.ROW_WID and T67704.ROW_WID = T316025.PRODUCT_WID and T67704.PROD_CAT2_WID = T150993.ROW_WID and T329697.TERRITORY_CODE = nvl(T339204.LOCATION , T329697.TERRITORY_CODE) and T329697.AREA_DESC = 'GROCERY AREA - EAST' and T329697.DIVISION_DESC = 'DOMESTIC SALES DIVISION' and T339204.USER_NAME = upper('Administrator') and case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end = 'JETRO CASH AND CARRY ENTERPRISES INC(10313)' and (T66755.PER_NAME_ENT_YEAR in ('2011', '2012')) and (T329697.TERRITORY_DESC in ('BOSTON', 'CHARLOTTE', 'FLORIDA', 'GREAT LAKES', 'MID-SOUTH', 'NEW YORK', 'WHITE ROSE')) )
group by T66755.PER_NAME_ENT_YEAR, T150993.X_CONS_MAJOR_GROUP, T329697.TERRITORY_DESC, T329697.AREA_DESC, T329697.DIVISION_DESC, case when T329697.ACCOUNT_NUM is null then T329697.BILL_TO_PARTY_NAME else concat(concat(concat(T329697.BILL_TO_PARTY_NAME, '('), T329697.ACCOUNT_NUM), ')') end
) D1
order by c1, c6
If we observe test query is very simple and easy to back track but in Dev it is appending like sawwith0,sawwith1 etc..looking difficult.
Is there in any configuration to change to generate query like Test(with out SAWWITH0).
NOTE:Any how results are same in both instances.
Please help me to resolve this issue.
Thank You,
Anil Kumar.

Anil,
Are your database settings the same in both of the rpds dev and test?
Check wether you didn't change anything to the default. Open your RDP double click on the Database in the physical layer and go to Feature you can check all the settings there
Adil

Two "instances" of RH 7?

When a project is open in RH and you select File/Open for a
separate project, RH closes the first one, no doubt for good
reason.
Does anyone launch RH a second time and open a different
project, so you can look at them both? What about copy/paste from
one to the other?
Can the two instances keep everything separate, or might one
project try to overwrite some temporary files open in the other? If
so, does the change "take"? Does RH crash?
(Reluctant to try without first touching base here.)
Thanks
Harvey

Peter, thank you for pointing me back to the forums from your website. You really are the RH guru, and as it turns out the forums aren't too difficult to search (we're new to them). You answered one of my questions this week (http://forums.adobe.com/message/2517232#2517232), that I believe was caused by having two instances of RH open. The missing .htt file error came from one project but the file referred to the other open project. I may have tried saving each too quickly so RH got confused. So opening two instances can cause an issue -- but my issue wasn't that hard to fix.
Thank you for your expertise and patience with all of us. You are wonderful-
amity

Best practice for multiple instances of the same BEX query

Hi there,
I'm wondering what's the best way to use multiple instances of the same BEX query. Let me explain what I mean:
I have a dashboard with different queries feeding different period of time such as: week to date, month to date and so on. One query for each since it is based on a user exit.
For each query I want to show different data in different sections of my dashboard. Per example: sales per directors or sales per customer group, sales per day, sales per week and the like.I tried to connect a simple bar chart via a direct connection but with no success due to the multiple lines generated by the addition of the sales director, customer group, week number and so on.
My question is about the way to connect the different queries efficiently in order to show the different data while avoiding multiple useless lines.
The image above shows the query browser where, per example, for a Month to date query there will be mutiple line for each week as well as one line for each director. If, for two different components, I want to show data per week and data per director or other representation what is the best practice:
Add another instance of the same query and only put the week information and another one will only the director info?
Should I bind those to the excel file and use formulas to make final calculations?
Will there be a performance issues for adding different instances of the same query
I have 6 different queries (read 6 user exit that filters time via user exit).
Depending on the best practices there might be 4 instances for each for a total of 24 instances in the query browser.
I hope my question is clear enough, if not please do not hesitate I'll clarify as much as possible.
Regards,
Steve

Hi Steve,
Might be trying for solution for a long time, If i understood your question clear let me clarify you few points.
You are trying to access the bex query which is designed with the exit's in the background based on the logic and trying to call the entire dimensions and key-figures in a single connection. Then you are trying to map those data in the charts.
Steve, try to make more connections based upon the logic and split them. use the same query but split them by sales per customer group, sales per day, sales per week by making three different connections and try. You can merge the prompts from all connections.
Hope this Helps!!!
Sorry if i misunderstood your question.
--SumanT

How to configure time synchronization for two NTP servers

We have IOSXR 4.2.1 on routers CRS3 and ASR9K with all recomended SMUs; we need to configure the time synchronization for two NTP servers with the configuration below, but the routers became unstable; synchronize with one NTP servers for some time, then switch to other NTP server, and keep doing this. Anyone know why this behavior?
ntp
authentication-key 1 md5 encrypted 01070F074F0A05
authenticate
trusted-key 1
server 10.192.32.32 prefer
server 10.192.32.33
source Loopback50
update-calendar
RP/0/RP0/CPU0:DFCRSDTC1#sh log | i ntp
Wed Jul 10 09:37:04.621 BRSPO
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:29:18 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:29:27 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.32 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:30:21 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:31:36 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->15.
RP/0/RP0/CPU0:Jul 4 21:35:56 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.
RP/0/RP0/CPU0:Jul 4 21:40:11 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 15->2.
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 21:50:52 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 21:59:26 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_RECOVERED : High priority NTP peer connection recovered - Stratum 6->2.
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : System clock selection failed
RP/0/RP0/CPU0:Jul 4 22:25:07 : ntpd[256]: %IP-IP_NTP-5-HP_CONN_LOST : High priority NTP peer connection lost - Stratum 2->6.
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-SYNC_LOSS : Synchronization lost : 10.192.32.33 : Peer unreachable or clock selection failed
RP/0/RP0/CPU0:Jul 4 22:56:16 : ntpd[256]: %IP-IP_NTP-5-ALL_CONN_LOST : All NTP peer connections failed.

Hi Claudio, that ddts is pretty generic to be honest but yes it is filed to address sync issues in the XR NTP algo.
The thing is that XR ntp clock selection is a bit different then iOS and follows the specs very closely which results in this erroneous loss behavior.
For instance, you could also see this issue with a sync loss if the update time is only 500msec off what it was before and that will result in a ntp sync loss rather then adjusting to it.
Also I wanted to mention that the ntp prefer is a bit of a misnomer in XR (since it follows the specs differently then IOS) and this knob was taken over from IOS really.
You might get some joy if you set it to one server only and see if that helps?
regards
xander

One server for two independ customer installations

Dear all,
I've one server and want to install two different SBO installations for two different
companies that are not related between them.
I'm going to create two SQL instance so DBs are in differente scope, and with license manager I could administrate two different license file..
Is it possible?
Regards,
Giovanni

Hi Sachin,
you're right with two different VM you can manage that, but this is similar to have two different server. My goal is to use only a server (phisical or virtual)... I think with 8.8 version we can do it, but I glad if someone has some experience of this scenario..
Regards,
Giovanni

Distinguishing between two instances of the same portlet

Hi Experts,
Is there a way to distinguish between two instance of the same portlet in different browser windows?
I'm looking for something like URL parameter passing, but just for portlets.
The problem is, I want a way to pass a parameter between views in a portlet, but in such a way that if another browser window is opened and navigated to that portlet page, the parameter won't be the same. Perhaps I can explain better with this example:
Page A has a portlet on it which has a textbox and 2 buttons - the first button stores the value in the textbox in the PortletRequest (or PortletURL) and if you click the second button the portlet navigates to a different view which displays the value. If I navigate with a second browser window to Page A, however, and only click the navigate button, that value which was stored by the first instance of the portlet will still be shown. I want them to be independent, I don't want changes in the one's PortletRequest to reflect in the other one's PortletRequest.
Any ideas?
Thanks,
JP

Why not use two instances of the same portlet, i.e. create two channels of the same portlet.
The behave the same, have the same application logic, so all you need is to transfer informations between the two portlets.If you want this within user space use the portlet session, otherwise access the http session context /application context and store the data there.
The behavior would be controlled by the portlet preferences, so channel a (instance 1) would be configured to run as controller and channel b (instance 2) would be configured as receiver.

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

One Instance of two instance/nodes Crash in RAC

Dear all,
I setup two nodes RAC 9.2.0.2 in HP Alpha OpenVMS 8.2 , one node is CAPL21(instance number=1) and another is CAPL22(instance number=2) . when normally run about five days. the second instance CAPL22 terminated abnormally, I check the alert and trace file as follows:
6-AUG-2008 06:29:39.82:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMS1_007.TRC;:
ORA-00600: internal error code, arguments: [kjctr_rksxp:rcvr], [1], [2], [], [], [], [], []
6-AUG-2008 06:29:40.32:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMS1_007.TRC;:
ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kjctr_rksxp:rcvr], [1], [2], [], [], [], [], []
6-AUG-2008 06:29:46.60:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMS1_007.TRC;:
ORA-00600: internal error code, arguments: [ksxpcncl3], [], [], [], [], [], [], []
ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kjctr_rksxp:rcvr], [1], [2], [], [], [], [], []
6-AUG-2008 06:29:47.38:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMS1_007.TRC;:
ORA-00600: internal error code, arguments: [ksxpcncl3], [], [], [], [], [], [], []
ORA-00603: ORACLE server session terminated by fatal error
ORA-00600: internal error code, arguments: [kjctr_rksxp:rcvr], [1], [2], [], [], [], [], []
6-AUG-2008 06:30:37.33:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_PMON_002.TRC;:
ORA-00484: LMS* process terminated with error
6-AUG-2008 06:30:37.33:
PMON: terminating instance due to error 484
6-AUG-2008 06:30:37.37:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMD0_005.TRC;:
ORA-00484: LMS* process terminated with error
6-AUG-2008 06:30:37.37:
Errors in file $1$DGA2:[ORACLE.V9.ADMIN.YUSDB.BDUMP]CAPL22_YUSDB2_BG_LMS0_006.TRC;:
ORA-00484: LMS* process terminated with error
6-AUG-2008 06:30:37.40:
System state dump is made for local instance
6-AUG-2008 06:30:37.56:
Trace dumping is performing id=[cdmp_20080806063037]
6-AUG-2008 06:30:42.47:
Instance terminated by PMON, pid = 20401500
Starting up ORACLE RDBMS Version: 9.2.0.2.0.
Oracle Bug? who can help me? Thanks in advance.
Message was edited by:
Efrain

> I use 100M switch not Gibit switch, maybe it's also problem?
Could be.. but one will need to look at the interface stats and switch stats to see whether the interconnect is coping.
For 2 nodes, a decent interconnect is not that expensive. 2 HBC cards and small Inifiband switch.
RAC is only as robust as the hardware it is running on.

EM for two instances

Similar Messages

Maybe you are looking for