EM of 11g not working

Hi,
I am using 11gR1 on windows xp. I have also installed oracle 10gR2 in another home on the same machine. The enterprise manager of 10g runs fine. But the service of 11g EM does'nt start.
Do I need to recreate 11g EM repository through emca? or any other ideas?
regards

as you said they are in different home...
Did you tried EMCTL DBCONSOLE START for the 11g instance

Similar Messages

Oracle 9i, 10g, 11g on same machine...11g not working....

Hello All,
I have a dilemma.
I have a server that originally had 9i client installed.
We installed 10g and ODP .Net to gain use of some new funcionality used in .Net and batch processing.
Halfway through testing we realized that 10g's version of ODP.Net has a memory leak issue.
11g was found to correct this issue so we installed it on the server as well and it solved the problem.
Life was good.
9i, 10g, 11g, and ODP.net were all working well.
However, this was a test server. We now needed to go through the same installs for the production server.
On the night of the software install someone made a mistake and installed 10g on the test server again for the second time, after 11g was already installed.
So at this point the test server has:
9i
10g
11g
10g
And now many of the applications on the server are not working correctly and no amount of config changes seemed to fix it.
So we decided to uninstall 11g and then 10g and start over.
At this point we have 9i and 10g installed and the applications are working correctly.
We have tried to reinstall 11g and configure multiple times and 11g will simply not work.
I am stumped at this point. The application that actually does use 11g and ODP.Net simply stops executing at the point it attempts to open a connection with NO ERRORS.
An Exception does occur but there are no contents or error messages in the exception. I have never had this happen before. How do you fix an error you dont have?
So at this point I am just reaching out to see if anyone might have a suggestion. The next step might be to perform a system restore to the point where life was good (before 10g was installed a 2nd time after 11g).
Anyone?

Thanks gdarling.
I was hoping to just start the thread and go from there as sometimes information overload makes people pass on reading the whole post. I am glad you still read it:)
To start off with here are the entries (unedited in my PATH variable):
E:\oracle11\product\11.2.0\client_1\bin;E:\oracle102\product\10.2.0\client_1\bin;E:\oracle\product\10.2.0\client_1;E:\Orant9i\bin;
I recently moved the 9i path back to the front in order to get the other applications on the server working again as some were erroring out with this when 11.2 was first:
*"OCIEnvCreate failed with return code -1 but error message text was not available"*
I searched for a long time as to the cause of this error but did not turn up much. Most of the posts just mention that the client was installed incorrectly.
Policy files:
I compared the assembly of the "working" server to the "bad" server and they appear identical as far as I can see.
Directories
-9i has one directory
-As you can probably see from the path, it still looks like there are 2 installations of 10g on the server. As well as remnants of three directories that resemble 10g install directories.
-11g has one directory
Couple observed behaviors:
1.
running sqlplus from the 9i and 10g directories works.
running sqlplus from the 11g directory results in the following error:
E:\oracle11\product\11.2.0\client_1\bin>sqlplus.exe
Error 6 initializing SQL*Plus
SP2-0667: Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
2.
Running tnsping works from the 9i and 10g directories
Running tnsping from 11g results in this:
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 13-MAY-2
010 09:32:32
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Message 3511 not found; No message file for product=NETWORK, facility=TNSTNS-035
05: Message 3505 not found; No message file for product=NETWORK, facility=TNS
*(NOTE: THIS ERROR ALSO OCCURS ON THE "GOOD" SERVER)*
Registry:
There is a difference in the registry.
The "good" server has this entry in the ORACLE area:
KEY_OraClient10g_home1
KEY_OraClient11g_home1
where as the "bad" just has
KEY_OraClient10g_home1
Both servers have ODP.Net folder containing:
2.112.1.0
There are also other entires in this registry area but they are the same.
It wasn't our original intention to have all three clients on the same machine. Halfway through our system testing of a new process we realized the 10g has a memory leak which was corrected in 11g.
So we just installed 11g. These are supposed to be able to coexist right?
It sounds like we could have just installed 11g...
I am going to look into your suggestions.
As far as sysinternals I am a novice. And I am assuming it would need to be loaded on the server...is that correct? Or should I be using it on my local machine with the application in question running?
Getting more software (sysinternals) installed on the server might be a hurdle...
Thanks again

EM 11g not working

i need help to solve this problem
my enterprise manager not working and failed to start the dbconsole
my database version is 11.2.0.3
my OS is oracle linux
please tell me what's the log files you need to send it and solve this problem

Hello,
What did you try to do to start the dbconsole?.
You need to do the following:
1-make sure to export ORACLE_HOME=Your oracle home
2-Export PATH=PATH:$ORACLE_HOME/bin
3-cd $ORACLE_HOME/bin
4-./emctl start dbconsoleWould you please post the result of running the above command?.
Kind Regards
Mohamed ElAzab
http://mohamedelazab.blogspot.com/

INSERT command in 11g not working

I m executing the following command in oracle 11g,but its saying column not allowed here.Is there any problem in command??interest_id is the primarry key. I tried all sorts.. but it isn't working... please some one tell me the solution.thank you.
INSERT INTO INTEREST_X(INTEREST_ID VARCHAR2(10),DESCRIPTION VARCHAR2(40)) VALUES (10,"General Crafts");

user11302075 wrote:
I m executing the following command in oracle 11g,but its saying column not allowed here.Is there any problem in command??interest_id is the primarry key. I tried all sorts.. but it isn't working... please some one tell me the solution.thank you.
INSERT INTO INTEREST_X(INTEREST_ID VARCHAR2(10),DESCRIPTION VARCHAR2(40)) VALUES (10,"General Crafts");Why you are giving data types with the columns ?What happens when you run this,
INSERT INTO INTEREST_X(INTEREST_ID,DESCRIPTION) VALUES (10,"General Crafts"); HTH
Aman....

Set_x_decimal_digits set_series_color in formsgraph.jar (11g) not working

Dear all,
if you have any idea regarding set_x_decimal_digits or set series color in formsgraph 11g_demo, kindly provide me with it.
i have searched too much but with no use.
regards
Wael Amar

it seems there is some differences between the version of FormsGraph I have and this version
http://code.google.com/p/forms-dvc-wrapper/source/browse/trunk/src/oracle/forms/demos/bigraph/FormsGraph.java?r=3
what i have is
* ================================
* Forms BI Bean Graph Integration
* ================================
* @author Frank Nimphius
* @version 1.1
* history of changes
* ================================
* 1. November 2002 initial creation
* 1. December 2002 added getProperty() method for property GET_DELIMITER to obtain the delimiter
* string from a get_custom_property() call
* 18. December , bug fixes 2708349,2708328
* added getProperty() method for property COLUMNCOUNT to obtain the number of
* columns from a get_custom_property() call
and the version which i found seems newer regarding to the date of january 2005 but version number is 1.0.2 the other one is 1.1 I am really confused (what i know is 1.1 is coming after 1.0.2 or am i wrong)
* ======================================================
* Oracle Forms Wrapper for Data Visualization Components
* ======================================================
* Author: Bincsoft
* based on the work by Frank Nimphius (version: 9.0.4 - January 2005)
* FormsGraph.java Version 1.0.2 - December 12th 2010
Now, I don't know how to replace only that class inside the package of bigraph.
regards,
wael amar

Webutil 11g not work

I have a problem in webutil. there is an error frm:40735 and ora:06508
Is it the same configuration in 10g or is different ?

You don't find what ?
Open the webutil.pll in the Forms Builder, then compile it then generate the executable with Ctrl+T
Francois

ODI Procedures not working after upgrading from 10G to 11G

Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
Thanks

If you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ?

DADs on WLS 11g (version 10.3.6.0) do not work (Error 404--Not Found)

Actually we use Application Server 10g (version 10.1.2.3.0) for different Forms 10g Applications (roundabout 1000 Forms) and want to change to Forms 11g and Weblogic Server 11g (version 10.3.6.0). A Test-Application on the Weblogic Server works fine, but DAD’s do not work at all.
In Enterprise Manager 10g i can configure DADs within the GUI of the Enterprise Manager, where i can see, if a connection could be established or not.
In Enterprise Manager 11g Fusion Middleware Control this doesn't seem to exist anymore, so i tried to configure the DADs manually, but something has to be wrong or missing, because there is no connection to the database and the following error appears:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I added several DAD’s to /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql/dads.conf like this:
<Location /pls/jd-download-dev>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername w_web_user_download
PlsqlDatabasePassword @BWKChfgPacV6yQL40lIKZqXUUA9wC4cmAw==
PlsqlDatabaseConnectString jddev TNSFormat
PlsqlNLSLanguage German_Germany.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDefaultPage w_anwendung.p_web_show_document
PlsqlAlwaysDescribeProcedure Off
PlsqlErrorStyle DebugStyle
</Location>
The passwords were obfuscated with dadTool.pl and the http-Server restarted with /opt/oracle/product/Middleware/asinst_1/bin/opmnctl restartproc process-type=OHS
The files /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/mod_plsql.cache.conf and /opt/oracle/product/Middleware/asinst_1/config/OHS/ohs1/moduleconf.plsql.conf were left unchanged.
Our Test-Application generates the following link
'http://172.106.2.7:9001/pls/jddevdev/B_ARCHIVE.P_ARCHIVE_VIEW?docfid=200'
that seems to be ok, because when i replace IP and port with our old IAS it works fine, but the WebLogic Server generates the above mentioned error.
To get some more information i searched an error_log in /opt/oracle/product/Middleware/asinst_1/diagnostics/logs/OHS/ohs1 but there isn’t any.
I used the following Documentation for configuring the DADs which is for HTTP Server 11g Release 1 (version 11.1.1), because I could not find one for version 10.3.6.0:
http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#i1055269
So probably there are differences between configuring version 10.3.6.0 and version 11.1.1 and so something is wrong configured or missing...
Thank you in advance for your help
Udo

Hi Raj,
it is a Sparc Solaris 10
and yes that's my enviorment.
After some more tests it's seems it's not a real bug but no realy nice working solution.
Eclipse uses for all instances the same secure storage, where OEPE also saves the password.
And if I look right the pasword was saved without the user context, so if you use an other user he takes the same password from the old user.
and I doesn't know how do OEPE check the connection in reality or only reply the last failed login message.
After deleting the complete secure storage and test it again with the juno version it works well.

Report 11g RUN_REPORT_OBJECT is not working FRM-41214

Dear all,
We are not able to run the reports using RUN_REPORT_OBJECT from forms 11g, we have tried our maximum to resolve this issue, unfortunately no proper documentation. Forms working without any issue are able to see the report out puts if I try running the report using internet explorer, but from the forms using RUN_REPORT_OBJECT It is getting failed. I could see two reports servers were running RptSvr_xxxxxx_FrmInst, rep_wls_reports_xxxxxx_frminst both servers queue status page also we can browse, but the reports running using RUN_REPORT_OBJECT is not working, the job queue is not showing these jobs.
When I use report diagnose it is showing "Exception when retrieving IOR"
Environment - Fusion Middleware 11.1.1.5.0, Windows 2008 server
Error : FRM 41214 Unable to run report
Can anyone through some lights on this issue.
We areTrying the below code :
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id);
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Thanks & Regards

user11319190 wrote:
I have posted it in the begning ,anway i am copying it for you again...
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
vjob_id := substr(vc_ReportServerJob,instr(vc_ReportServerJob,'_',-1)+1);
vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
-----Please not that it is not reaching here......
IF vc_rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
message ('Report failed with error message '||vc_rep_status);
END IF;
END;
Edited by: user11319190 on 08-May-2013 00:12Hmm.. I don't see the report name whom is calling or run. I modified your code, give a try..
DECLARE
v_report_id Report_Object;
vc_ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
vjob_id VARCHAR2(100);
BEGIN
v_report_id:= FIND_REPORT_OBJECT('CFR007');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE,SYNCHRONOUS);
     SET_REPORT_OBJECT_PROPERTY(V_REPORT_ID,REPORT_EXECUTION_MODE,BATCH);
/* edit the report name like D:\repname.rep */
     SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,<write the full path of reports>);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,'RptSvr_xxxxxxx_FrmInst');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER,'paramform=no');
vc_ReportServerJob:=RUN_REPORT_OBJECT(v_report_id); ---- exception is here
VJOB_ID := SUBSTR(VC_REPORTSERVERJOB,INSTR(VC_REPORTSERVERJOB,'_',-1)+1);
/* i added loop */
     WHILE VC_REP_STATUS in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
       vc_rep_status := REPORT_OBJECT_STATUS(vc_ReportServerJob);
     END LOOP;
-----Please not that it is not reaching here......
IF VC_REP_STATUS = 'FINISHED' THEN
    WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id ||'?server=rptsvr_XXXXXXXX_frminst','_blank');
ELSE
    message ('Report failed with error message '||vc_rep_status);
END IF;
END;Hope this works..

Parameter is not working in HTTP( XML FEED) dataset in bi publisher 11g

Hi,
I have used parameter in BI Publisher 10g for HTTP(XML Feed) dataset to have dynamic url which worked by using ${p_url} where p_url is the parameter.
The same procedure when I use in BI Publisher 11g is not working.It does not consider the parameter ${p_url} and throws the following exception
*oracle.xdo.dataengine.datasource.plugin.DataAccessException: java.lang.Exception: java.net.MalformedURLException: no protocol: ${p_url}*
Has anyone faced this issue?
Please let me know if am doing something incorrect here.
Thanks &Regards,
Balaji

Thanks for your reply.
In BI Publisher 10 g we are using it this way ${p_url}.
p_url is the parameter which gives us the entire URL for the XML feed.
e.g. p_url=http://rss.news.yahoo.com/rss/topstories
The p_url takes the entire url.
Please let me know if this can be done the same way in 11g.
Thanks,
Balaji

Reports who work in BIP 10G does not work in BIP 11G

Hi!
We are in the middle of going from BIP 10G to BIP 11G (latest patch installed the 9 of february). We have used the Upgrade Assistant to migrate the reports from 10G to 11G, about 80-90% are working directly.
But, as always are there some problems. There are 2 major problems I am struggling with for the moment. 1 is long running reports who gets "Connection reset by peer" before the report ends and the more problematic which is this:
[2012-02-27T11:09:50.397+01:00] [bi_server1] [ERROR] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] XSL error:[[
<Line 80, Column 151>: XML-23002: (Error) internal xpath error
@Line 80 ==> <_G><xsl:if test="sum($G1[(./QADATE02 = current-group()/QADATE02)]/QATRQT) = '0'" xdofo:ctx="3">
[2012-02-27T11:09:50.397+01:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 24] [userId: <anonymous>] [ecid: 22bf1318a95b3a18:-528a5dc9:135b0d15f61:-8000-0000000000025a30,0] [APP: bipublisher#11.1.1] oracle.xdo.XDOException: java.lang.reflect.InvocationTargetException[[
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1205)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:276)
     at oracle.xdo.template.FOProcessor.createFO(FOProcessor.java:1973)
     at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1117)
     at oracle.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:124)
     at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:372)
     at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:93)
     at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1059)
     at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:624)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:477)
     at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:447)
     at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:267)
     at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:299)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:122)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:64)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:917)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:609)
     at oracle.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:328)
     at oracle.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:187)
     at oracle.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1181)
     ... 40 more
Caused by: oracle.xdo11g.xqxp.XQException: XPTY0004
     at oracle.xdo11g.xslt.XSLStylesheet.flushErrors(XSLStylesheet.java:1850)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:616)
     at oracle.xdo11g.xslt.XSLStylesheet.execute(XSLStylesheet.java:551)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:345)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:194)
     at oracle.xdo11g.xslt.XSLProcessor.processXSL(XSLProcessor.java:230)
     at oracle.xdo11g.parser.v2.XSLProcessor.processXSL(XSLProcessor.java:124)
     at sun.reflect.GeneratedMethodAccessor7820.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.xdo.common.xml.XSLT10gR1.invokeProcessXSL(XSLT10gR1.java:920)
     ... 44 more
Does anyone have the solution for this type of error, we have about 30-40 reports that is behaving like this in BIP 11G but works fine in BIP 10G.
Can we do anything general in the BIP 11G or does we need to find the solution for each report and change in the template?
All ideas are appreciated, thanks,
Anders B

Hi!
Have everyone out there been able to use the upgrade assistant without any problem?
The UA.bat program says everything is ok but the report actually created in BIP 10G does not work in BIP 11G. We are looking for documentation or "findings" of what the problem can be, in a more general way. We are aware of that we probably have to fix this manually, but we dont know what to fix, and it is not so "fun" to be forced to re create all this templates and reports. The datamodell seems for the most of the time works, so we get a working xml source but the creation of the report thru the template dont work.
Best regards,
Anders

OBIEE 11g - Navigation in Parent Child Hiearchy not working

Hi All,
I have a employee parent child hierarchy and I want to show revenue for each employee in the report. I have modeled my revenue as a measure like case 4 shown in the following link
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
So for example this is my report ,
--David (30)
---Sandra (15)
-----Joe (10)
Joe'e revenue is 10, Sandra's is 5 (showing her 5 Joe's revenue) and David's is 5 (showing his 5 Sandra's revenue)
Issue :
Now what I want is to provide action link on the revenue column so that when user would click on revenue for any employee it would direct them to a detail report showing the bifurcation.
For ex, I want that when user click on 15 which is Sandra's revenue, he would be redirected to a detailed report for Sandra and similary for Joe and David
MY ISSUE IS that the navigation is NOT working for sandra and Joe. It is only working for David (who is the ancestor of sandra and Joe). When I click on 15 to see sandra's detail report, it doesn't do anything and in the bottom left corner of the browser status bar below I see an ERROR saying
(same for Joe but David work's fine)
Message: 'getLevelInfo(...)' is null or not an object
Line: 1
Char: 11142
Code: 0
URI: http://localhost:7001/analytics/res/b_mozilla/answers/selectionsmodel.js
Why is that happening? Is that because I have modeled the revenue as an measure and not attribute. Is navigation not possible in this case?
Anybody has any solution or workaround for this, it will be highly appreciated.
Thanks,
Ronny

Ok, so let me explain this in detail and give the structure of my tables and the data,
There are three tables.
1.Parent Child relationship table - pctable
2.Closure table which OBIEE creates through a script - reltable
3.Fact table which contains the revenue - facttable
This is the data
pctable
personid | managerid
David | NULL
Sandra| David
Joe|Sandra
reltable
memberkey | ancestorkey |distance |is_leaf
David|NULL|NULL|0
David|David|0|0
Sandra|Sandra|0|0
Joe|Joe|0|0
Sandra|David|1|0
Joe|Sandra|1|1
Joe|David|2|1
facttable
personid|revenue
David|5
Sandra|5
Joe|10
and my joins conditions are, I join pctable to reltable and then reltable is joined to facttable like this.
pctable.personid = reltable.ancestorkey
reltable.memberkey = facttable.personid
and then in the report, when I pull up the pchierarchy build from pctable and revenue , I get as below and like I said, when I click on Sandra to see the revenue she contributes, I am not able to navigate. Can you let me know what modifications needs to be done?
---David(20)
----Sandra(15)
------Joe(10)

DBTransactionStateListener not working properly in JDeveloper 11g TP4

Hi All
I've created a custom DCTransactionStateListener and implement transactionStateChanged(boolean state) method. When the db transaction state is being changed i set a parameter in the HttpSession. I need this in order to know if transaction is dirty.
In JDeveloper 11g TP3 it's working properly, but now i test it in TP4 and it's not working. The method is not called. I've tried with delete and modify existing rows, but the method transactionStateChanged(boolean state) was not called.
Please anyone give some help to resolve this.
Regards,
JavaDeVeLoper

In general, you should be able to reference the isTransactionDirty() property of the data control without needing to create your own custom listener here, but it looks like for the TP4 and later builds, if you do want a custom DCTransactionStateListener, you'll need to override the
package model.utils;
import oracle.adf.model.bc4j.DataControlFactoryImpl;
public class MyDataControlFactoryImpl extends DataControlFactoryImpl {
public MyDataControlFactoryImpl() {
protected String getDataControlClassName() {
    return MyCustomDCJboDataControl.class.getName();
package model.utils;
import oracle.jbo.common.ampool.SessionCookie;
import oracle.jbo.uicli.binding.JUApplication;
public class MyCustomDCJboDataControl extends JUApplication {
public MyCustomDCJboDataControl() {
    addTransactionStateListener(new MyDCTransactionStateListener());
public MyCustomDCJboDataControl(SessionCookie sessionCookie)
     super(sessionCookie);
     addTransactionStateListener(new MyDCTransactionStateListener());
}

OAM 11g "Failure URL" in Authoriztion policy not working?

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

Hi,
Per the subject, I am running OAM server 11g (11.1.1.3), with an OAM 10g Apache webgate.
In the OAM Authorization policy (protected), I have specified a full URL for the "Failure URL", to get the browser to redirect when an authorization failure occurs.
However, when I test with a user that does not have access (user authenticates ok, but doesn't have right to access the protected resource), instead of the browser being redirected, I am getting an "Oracle Access Manager Operations Error" page.
I've been trying to figure this out, and have found several threads about this, e.g.:
OAM 11g authz redirect URL not working?
But, as I said, I am using OAM 11g server, and there is no "Inconclusive URL" in the policy settings (I guess there was in 10g, but not in 11g).
I have trace logging enabled on the OAM server, and I can clearly see that the request is getting "results DENY", but there's no indication in the logs that OAM server is aware of any failure redirection URL.
I've also got a header trace, and I can see that the browser is simply being re-directed to the "/oberr.cgi...." URL, so it' not going "somewhere else".
So, does anyone know why the "Failure URL" is not working in OAM 11g in Authorization policies?
Thanks,
Jim
P.S. The URL that it's suppose to be re-directing the browser to is in the Public resources under Authorization, and as I said, I don't see the browser even attempting to go to the failure URL, either via header traces or the OAM server logs.
Edited by: jimcpl on Nov 5, 2011 8:53 PM

Obi 11g row level security not working

All,
I am very familiar and have worked with obi 10g row level security and it works pretty easily. Now in 11g not so easy. I am basically setting permissions on data filters on app roles as per the new 11g instructions and meta data guide, however, I never see the filters being applied in the report and also in the nqquery.log. I have tried in vain, and nothing. The filters are never being applied for the test user. I even verified the user is in the specified app role via their my account->app roles tab. Now has anyone had this experience or now is there something that must be done additionally now.
Very frustrated... ;(

Ok, so I have found the solution and ultimately the answer to why the object level and row level security was not being applied. It so happens that the app policy: 'resourceType=oracle.bi.server.permission, resourceName=oracle.bi.server.manageRepositories all' not only allows the management and access to online RPDs; but, IT ALSO DOES NOT APPLY SECURITY/PERMISSIONS IN THE RPD TO THAT USER thus you are super user. So the OOTB BIAdministrator app role which my AD user was being assigned never had any security applied due to this. How I tested:
1) I created a test user
2) Assigned that user to the BIAuthor app role and saw that they had the security applied that I was testing, which was simple object denial and row-level security to just one year on the date dim.
3) Since it was working, I then assigned that user to the BIAdministrator role. This produced that the test user now does not have any restrictions that I set and that were working before. Thus, security/perms in the RPD are not applied.
4). I removed the user from the BIAdministrator app role, kept in the BIAuthor app role and then created new test app role. I mapped that user to this new role along with the BIAuthor role. I then proceeded in creating new app policy with just that policy and assigning the new app role to it.
5) I logged into the presentation services again with this test user after assigning to new app role and policy. My test user again does not have the security being applied and does not get any perms/security that I set and applied in the RPD. On top of that my test user is now able to login in online mode to the rpd via the bi admin tool.

EM of 11g not working

Similar Messages

Maybe you are looking for