EM12c and GC11g Agent for Windows 2003 R2 64 bit

Hello Everyone,
I have setup a GC 11g on Oracle Linux 64 bit to monitor the servers in the data center.
The problem is, I'm having difficulties installing an agent in Windows 2003 R2 64 bit.
Few months ago when I checked the certification matrix for GC 11g Agent, I saw that it didn't support Windows 2003 R2 64 bit platform.
Apparently, now I cannot choose 11.1.0.1.0 in the certification matrix anymore and have left with 12.1.0.1.0 and 12.1.0.2.0.
However, even the 12c also doesn't put Windows 2003 R2 64 bit platform in the list of supported OS platform.
The strange thing is Windows 2003 R2 32 bit is supported.
So, my questions are:
1. Is there any of you who was successful in implementing the EM12c or GC11g agent on Windows 2003 R2 64 bit?
2. If you are successful, did you experiencing any problem after the installation and during the installation phase?
3. Can I use 10.2.0.5.0 agent which is supported to be installed on Windows 2003 R2 64 bit and managed by either GC11g or EM12c?
Thank you,
Adhika
Edited by: adhika on Oct 13, 2012 1:09 PM

Hi Adhika,
Windows 2003 R2 is not supported.
The only supported platforms are :
XP,Vista,7,2008 R2,2008,2003
Even 10.2.0.5 agent is not supported.
The only supported platforms are:
2008R2
Regards,
Venkat
Edited by: venkata thiruveedhi on Oct 14, 2012 3:29 AM

Similar Messages

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?

Does the 2.1 web policy agent for Windows 2003 work on a 64 bit OS ?
I have a customer having a world of issues getting the agent to start.
Jeff Courtade

No. 64bit support is not there for 2.1 agents on Windows.
-Subba

Download 10g for Windows 2003 server 32 bit does not provide the correct pr

The following Oracle OTN link provides a misleading product. It says that the following link provides the Oracle 9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32bit) and
what it contains is the OUI for applying the 9.2.0.3 patchset and the patchset itself. It does not contains the product.
http://www.oracle.com/technology/software/htdocs/devlic.html?http://otn.oracle.c
om/software/products/oracle9i/htdocs/win2k3soft.html

>
As far as I can tell there doesn't appear to be an Oracle10g download for
10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
for Windows then apply the patch to bring it up to 10.2.0.4.
Am I seeing this correctly or am I missing something?
>
Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
http://wiki.oracle.com/page/Patchset+Number+Overview
Perhaps you also ought to go through this {message:id=3251402}
Regards,
Phiri

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Oracle 9i Enterprise for Windows 2003 server 32bit

Hello,
tried to download an Oracle 9i Enterprise for
Windows 2003 server, 32 bit. But all I've got
is a patch... Perhaps the wrong file in the
download area?
Hans-Juergen Thiess, Berlin / Germany

Hello.
I dont Know, from where download Oracle 9i Database.
In http://www.oracle.com/technology/software/products/oracle9i/index.html, only can download Release, but not the full version.
Can you help me?
Thanks

Installation of SAP NetWeaver on Windows 2003 Server ( 32 Bit )

Hello Gurus,
I am planning installation of SAP Net Weaver - SR2 on Windows Server 2003 ( 32 Bit ) and oracle 10g is my database.
can anybody guide me from where I can install the software coz in the market place SAP N/W-SR3 is available.
Is SAP N/W - SR3 is recommeded for Windows 2003 Server ( 32 Bit ).
Can any body guide me the process & my qurey.
Thanks & Regards
Shishir

Read SAp note Note 1108852 - SAP NetWeaver 7.0 / Business Suite 2005 SR3: Windows
it says:
21/MAY/08
SAP system installation only supported on 64-bit operating systems, except for dialog instances
As of SAP NetWeaver 7.0 SR3 and Business Suite 2005 SR3, SAP only supports to install dialog instances on 32-bit operating systems. All remaining SAP system instances (central instance, database instance, central services instance (SCS), ABAP central services instance (ASCS)) must be installed on 64-bit operating systems. Therefore the folder "SAP Systems" is not available on the "Welcome screen", when you start the installation from a installation master DVD for 32-bit.
You might need to install dialog instances on 32-bit if you want to use 32-bit SAP NetWeaver components, such as Adobe document services. We recommend, however, to first check whether these 32-bit components can run on 64-bit operating systems. If so, we recommend to also use 64-bit systems for these components, including the dialog instance.
If you want to install a non-productive SAP NetWeaver 7.0 SR3 based system (test systems or development are normally productive systems) on 32-bit, proceed as follows:
1. Install a SAP NetWeaver 7.0 SR2 (SAP ERP 2005 SR2, SAP CRM 5.0 SR2 SAP SCM 5.0 SR2, SAP SRM 5.0 SR2) system.
2. Patch this system to SAP NetWeaver 7.0 SR3 (SAP ERP 6.0, SAP CRM 5.0 SR3, SAP SCM 5.0 SR3, SAP SRM 5.0 SR3).

Trex can't be updated to higher levels on windows 2003 server 64 bit

Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PM

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

CA and Certificate Issue in ACS 4.0 For Windows 2003 Enterprise Server

Hi,
I have configured Microsoft CA server on the same ACS 4.0 for Windows 2003 enterprise server which was configured earlier using the self generated certificates for EAP and PEAP authentications.
After I change the certificate from self generated to the new CA certificate that can be viewed under install ACS certificate option on ACS server but having the following problems
1. SSL is not functioning while internet browser access to the ACS server and going through http instead of https.
2. Wireless clients are authenticated successfully even after the certificate is uninstalled.
Any help on these problems will be appreciated.
Thanks
Best Regards,
Ahmed

Hi Rohit,
Thanks for reminding the HTTPS option under Administration Control on ACS.
I have some doubts pertaining to installation of certificates on Wireless clients though it is optional for Self Generated Certificates but what in case of Mirosoft CA as I tested wireless client authentications even after removing the certificate from microsoft supplicant WindowsXP SP2 having installed the patch KB885453 for PEAP. How the certificate on wireless client works.
Is it mandatory or optional to keep certificate on Wireless Clients as they could able to get authenticated through ACS after removing the certificate.
Thanks
Best Regards,
Ahmed

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

J2sdk-1_4_2 windows-ia64.exe needed for Windows 2003 ia64 bit ?

hai,
I am installing SAP 4.7 x200 on windows 2003 , Intel 64 bit machine with DB as Ms SQL 2000.
Before Installing SAP i need to have a java runtime environment basically 64 bit for Intel on Windows . I followed SAP note but i am not able to find the exact j2sdk file . I looked at java.sun also and even there i can't locate the file J2sdk-1_4_2 windows-ia64.exe .One can easily find the same file for amd machine.
kindly let me know if there is 64bit version of j2sdk on intel 64 bit.
thanks in advance
jase

HI:
https://sdlc5a.sun.com/ECom/EComActionServlet;jsessionid=1D920D7BB1FC5D31C70E55CE3BE777E4
You will find the link to IA64 towards the bottum of the above page.
If for some reason the page doesn't open, please try the following page:
http://java.sun.com/products/archive/j2se/1.4.2_13/index.html
Thanks!
If this problem has been solved, then go ahead and close this message!
Rewards Points to the helpful answers

Oracle 9.2.0.1 software URL for window 2003 server

I go to http://www.oracle.com/technology/software/products/oracle9i/index.html
and download two zip files from Oracle9i Release 2 (9.2.0.1) for Windows SERVER 2003.
However, one zip file is for the Oracle installer and the other zip file is for
9.2.0.3 patch.
There is NO 9.2.0.1 base software for window 2000 server.
Where can I download the 9.2.0.1 base software for window 2000 server (32 bit)?
Thanks.

Hi,
From metalink :
Microsoft Windows 2003 (x86) Version 2003
Oracle Database - Enterprise Edition Version 9.2
Status: Certified
Certification Note: Patch Set 9.2.0.3.0 or higher is required.
That's why when you download 9iR2 for W2003 32-bits, you download the 9.2.0.3.
Nicolas.

Oracle 10.2.0.3 Full Client for Windows 2003 32bit

Hello,
I know this is a stupid question, but I cannot seem to find the download for the full client for 10.2.0.3 for Windows 2003 32bit server. I have found the instant client, but not the full client.
Thanks in advance.
Brian

Hi Zekmoe,
do you have the PATCHES tab in Metalink (metalink.oracle.com)?
If not, please check your PROFILE in metalink - if PATCHES and UPDATES says: NO, then please contact your administrator (mentioned also in your PROFILE) to enable the patch download.
If you'll have the PATCHES tab then go to QUICK LINKS in the patch screen and choose Windows 32bit and 10.2.0.3
Hope this helps - kind regards
Mike

Remote Agent for ACS for Windows 2008 R2 64-bit

Hi,
We having difficulties with installing remote agent on windows 2008 R2 64-bit server and got the attached error.
Our ACS is 4.2.0.124 and remote agents we tried are :Remote-Agent-ACSse-win-v4.2.1.15-K9.zip and Acs-4.2.1.15.9-RA.zip.
I see following urls says it does not support Windows 2008 R2 and also 64-bit Windows,
https://supportforums.cisco.com/message/3135061#3135061
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However following url says its support 2008 R2 with 64-bit version
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2.1/Release_Notes/acs421_rn.html
Appreciate if someone can adivse us what vesion (file name) of Remote Agent can support (or working) for Windows 2008 R2 64-bit.
thanks in advance

Hi Tarik,
What I wanted to say that the below url says that ACS 4.2 does not support on 64-bit OS:
ACS Requirements
You must use ACS Remote Agent for Windows, version 4.2, with ACS SE, version 4.2. We do not support other Cisco Secure ACS releases.
Note ACS Remote Agent 4.2 for Windows does not support 64-bit operating systems.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/remote_agent/rawi.html#wp289019
However could you please let me know what exact Remote Agent file you recommend to use for windwos 2008 R2 64-bit Server. The ACS SE version that I have is 4.2.0.124.
Thanks

Link to downlaod 10.2.0.4 for windows 2003 64-bit

hi, can you help me to provide link to download 10.2.0.4 for windows 2003 64-bit?
Thanks

On the OTN site there's a download page with 10.2.0.4 for Windows Vista x64 and Server 2008 x64, but for "plain" Windows x64, I see only the base 10.2.0.1 release.
So you would need a Patch Set for 10.2.0.1 -> 10.2.0.4.
For retrieving/being allowed to use Patch Set releases, you need Support (or SULS as the service is called in contractual terms) and a support web account.
Edited by: orafad on Jan 7, 2009 1:00 PM

I need to download Oracle 10g Client (10.2.0.4) for Window 2003 64bit

I need to down load Oracle Database 10g Client Release 2 (10.2.0.4) for Windows 2003 64bit server I found the 10.2.0.1 but can't find the 10.2.0.4 download.

Hi,
Here is the link.
Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x64 and Microsoft Windows Server 2008 x64
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10204_winx64_vista_win2k8.html
For 32-bit OS, you can get the software from:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html
All the database software can be downloaded from:
Oracle Database Software Downloads
http://www.oracle.com/technology/software/products/database/index.html
Regards,
Hussein

EM12c and GC11g Agent for Windows 2003 R2 64 bit

Similar Messages

Maybe you are looking for