EM12c , Ops Center plugin missing ?

I recently installed EM12c and I'm following the manual to get the plugin for "Ops Center Infrastructure Stack".
The problem is that there is no "Ops Center Infrastructure Stack" in the list? Is there something I need to do first ? Is there a way I can download the plugin from somewhere else ?
From the manual
Download the Plug-in From the Enterprise Manager Store
This procedure assumes that you are connected to the Internet and describes how to download the plug-in immediately. Alternatively, you can choose to schedule the download to occur at a specified time.
From the Setup menu, click Extensibility, then click Self Update to get the list of updates.
Click Plug-in from the list.
Select Ops Center Infrastructure Stack from the list, then click Download.
Select Immediately, then click Select to start downloading the update.
When the download is complete, plug-in deployment page is displayed.

thanks, I found it !
Also, this morning, the plugin is suddenly available for download in the extensibility > plugins page. This after the auto-update job ran successfully last night (there's a large number of new plugins available). So it does seem that when the manual says the plugin is included with 12c, they meant to say, the plugin is available with 12c after running the auto update job.

Similar Messages

  • Adding Exadata in EM12c Ops Center

    Hi,
    I have recently installed EM12c Ops Center to Manage out Data Center. I have couple of Exadata servers but I'm not able to add these into ops Center assets.
    When I'm creating a Discovery Profile for Exadata it only asks for JMX Discovery credentials..NO other options(ILOM, OS) I dont know what is JMX and how to configure it. Please someone tell me is there any other way I can add Exadata asset in Ops center.
    Thanks & Regards

    thanks, I found it !
    Also, this morning, the plugin is suddenly available for download in the extensibility > plugins page. This after the auto-update job ran successfully last night (there's a large number of new plugins available). So it does seem that when the manual says the plugin is included with 12c, they meant to say, the plugin is available with 12c after running the auto update job.

  • Storage Plugins for Ops Center Storage Discovery

    Oracle VM provides for several vendor storage plugins when connecting to iSCSI storage.
    Oracle Enterprise Manager Ops Center allows for discovery profiles but only has a SunZFS Storage Appliance SCSI plugin in its drop down, not even the Generic iSCSI plugin OVM uses.
    Can the Oracle VM plugin be used with Ops Center?
    What are the plans to support vendor specific storage plugins for Ops Center?
    Is there a development guide for writing a storage plugin for Ops Center?

    We had some discussions along the same lines in our organization, and it came down to SA's and DBA's requiring different toolsets and their comfort level with them. Of course, a lot of this was inherited from the hardware being Sun before it was merged into Oracle, but the situation remains. Also, the SA's came to the conclusion to use Ops Center before the DBA's got around to installing their management interface (we came from a script-based management environment) -- that has something to do with it as well.
    If you get to start from the ground up, that's a slightly different matter.

  • How do I configure a basic LDAP to work with OPS Center?

    I have Solaris 11 and have configured it a few ways with LDAP. The last setup I used Directory server with a proxy then added LDAP configs. I am having problem getting the clients working correctly but first I need to know if I can just configure LDAP without DSEE and allow OPS Center to control the users?
    Chapter 9 of the Oracle Solaris Administration guide says DSEE is recommended but not required and points you to chapter 14. But I have been unable to figure out how to create the DN and Bind PW prior to configuring LDAP with IDSCONFIG. The OPS Center server is already in play so if configured correctly I should be able to talk to the LDAP server.
    Does anyone know what set I am missing or whether it can be done without DSEE?

    After contacting Oracle I was informed that there Documentation is misleading and that DSEE is required.
    From Oracle
    "The statement "However, while using the Oracle Directory Server Enterprise Edition is recommended, it is not required", does not mean you can configure the Solaris native ldap client without a Directory Server. What the statement means is the Solaris native ldap client is not required to use the Oracle Directory Server, it is recommended, but the Solaris native ldap client can be setup to work with third party Directory Servers. The term "not required" is a reference to the use of the Oracle Directory Server vs a third party Directory Server."
    The documentation does not state that Directory Server of any kind is required.

  • Configuring email alerts in Ops Center

    Hi all,
    I have been struggling quite a while to get email alerts working from Ops Center with no success in 11g nor 12c. In the Ops Center GUI, Administration -> EC -> Local Users -> configured user to receive all alerts and emails. I have also configured email relay host correctly(checked a million times).
    Sending emails from the host through the email relay works fine, so I'm baffled.
    #mailx -s " Test from Ops Center" "my.email@work" < text-file
    Do I need to configure something else in Ops Center or what am I missing here?

    The email alerts from Ops Center are working for me, I performed...
    1.) You must be able to send email from the command line on the Enterprise Controller to the intended email address, ie;
    # mailx -v [email protected]
    Subject: Email test from Enterprise Controller
    EOT
    <control-d>
    That test must be successful, and the email received!
    2.) Setup the Notification Profile in the BUI...
    Administration > Enterprise Controller > Users
    Highlight the root user, select Configure Notification Profile (the wrench icon)
    Notifications via >> Subscribe to All Notifications
    User Interface > "Problem updates and all Severities"
    Email: > "Problem updates and all Severities"
    Pager: None
    Notifications Delivery Details
    Email: [email protected]
    Pager Address: <blank>
    Mail Host: localhost
    Port: <blank>
    Mail User: root
    Mail Password: <enter the password for root on the EC>
    Connection Security: STARTTLS
    Select: Update Notification Profile
    3.) Go to Assets > Operating System (second level down) of some Asset
    In the center pane select the "Monitoring" tab
    Under "Threshold Monitoring Rules" highlight "Memory Usage Percentage"
    Edit Alert Monitoring Rule Parameters (the pencil)
    Monitor for alert limits continuously
    Toggle: Generate Alert after 1 Minute
    Change Critical MemoryUsage.usedMemoryPercentage > 2%
    Change Warning MemoryUsage.usedMemoryPercentage > 1%
    Apply
    Wait one minute, you should receive an email that resembles the following:
    Notification is generated by (90037): myserver
    ORACLE Enterprise Manager 11g Ops Center Reported Problem
    GlobalZone: myserver
    Problem ID: 425Detection Date: 02/24/2011 05:23:36 GMTSeverity:CriticalState:UnassignedOwner:-Assigned Date: -Problem Description:Memory Usage Percentage has reached 59.4122 on myserverOps Center Server: myserverProblem Link: Click on to be redirected to the reported problem
    https://myserverx:9443/emoc/?objectName=com.xxx.hss.domain%3Aname%3DNORM-myserver-XVM_SATELLITE%2Ctype%3DOperatingSystem&treeId=asset-tree&handler=alarms&alarmId=425Suggested Actions NumberSynopsisAssociated Operational Plan-None

  • Add existing OVM servers to Ops Center 11g?

    We are turning an Ops Center 11g pilot project into production and we need help with our existing OVM Server for SPARC servers. We have a number of OVM 2.2 servers. When we discover them we don't see the VM asset showing in the "All Assets" list. Is there a way to discover the "Oracle VM Server for SPARC" asset that we can then add to virtual pools?
    Thanks,

    Try this......
    Also it shouldn't allow you to add such servers in an OVM Server for SPARC Server Pool.
    Here a filter is missing in Ops Center: such servers shouldn't be proposed in the list of assets that can be added to a Server Pool, instead of allowing you to try it and then see an error that can't be understood.
    To have a setup with servers that you will be able to add to Server Pools, and on which you will be able to create logical domains from Ops Center, you can either install these servers from Ops Center following the documentation at :
    http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_ovm_sparc_mgmt.htm#autoId11 "Installation of Oracle VM Server for SPARC"
    or you can install manually the LDoms Virtualization Controller agent on an already installed server.
    I think this is not documented for LDoms, the current documentation at http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13 "Installing Agent Controllers From the Command Line" will install a Zone Virtualization Controller Agent.
    You should first uninstall the current Zone Virtualization Controller agent on your servers, running from the control domain :
    $ /var/scn/install/uninstall
    then I didn't do it yet manually on S11, I think it should be done as below if someone can confirm or provide the right procedure on S11. Otherwise I'm installing a s11 setup (with an MSR to sync that will take time) and could confirm tomorrow this manual procedure.
    It should be similar as in http://docs.oracle.com/cd/E27363_01/doc.121/e27511/asset_mgmt.htm#autoId13
    except that the zip to download at step 4 it the IPS zip : OpsCenterAgent.SolarisIPS*.zip
    then at step 7, you have to run "install -l -p <proxy IP address>" instead of "install -a"
    This step will expect that the S11 version configured on this server matches the version in the MSR you defined in Ops Center.
    and at step 10, before running the "agentadm configure..." command, you need to create a file providing network settings :
    create a file /opt/sun/n1gc/lib/virtualController.properties with the following content that you should adpat to your host (here for example on my host smt4-24, with IP address 10.166.88.53)
    xvmserver.appliancename=smt4-24
    network.interface=net0
    network.ipaddress=10.166.88.53
    network.subnetmask=255.255.255.0
    network.defaultgateway=10.166.88.1
    then proceed to the agentadm configure command as described at step 10.
    After this command has finished, you should have in Ops Center an OVM for SPARC with ldoms management capabilities, allowing you to add this asset to a Server Pool and create logical domains

  • After Installing Solaris11 through Ops Center the OS Asset is not showing in Ops Center UI.

    After Installing Solaris11 on T4-4 through Ops Center the OS Asset is not showing in Ops Center UI. Any Reasons why?

    This is because probably caused by the following bugs:
    15940804 - The LDom Control Domain OS asset is missing for the t5120 therefore it's unable to successfully provision Solaris 11.1.1 CDOM on a t5120 asset - see workaround above
    15818412 - delete asset is not properly cleaning the __local mbeans in the domain model - Fixed in DU3
    To reapply the deployment plan, delete the access point and rediscover. Still the plan fails upgrade to the latest version of Ops Center.

  • Importing SUN Explorer to OPS Center

    Dears ..
      I need to do a preventive maintenance for some of our customer , instead of manually  looking into SRAS And Explominer o/p "As it takes time concluding report from both utilities plus they are
    in-efficent to report"  ,  can i use OPS Center to import captured explorers and analyze it ..
    If so , does it cover all below items:
    - H.W. faults .
    - Major errors from logs for O.S. cluster  ,  Mis-configuration
    - Performance and resources utilization .
    - Missing Critical patches/Withdrawn patches .

    Hi user12131976,
    for passowrd and security questions please read the "Oracle® Enterprise Manager Ops Center Security Guide 12c Release 2 (12.2.0.0.0)" with attention at Section "1.1.7 -Authentication Between the Proxy Controller and Agents". Please read the "Security Features" and evaluate to create a "3.2.1.1 Using SSH Key-Based Authentication" process.
    HTH
    Michele V.
    If you want, mark the reply as “Helpful Answer“ or “Correct Answer”. By marking replies correct or helpful, you make it easier for community members to find replies that might help them in a similar situation.

  • Can Ops Center forward or generate SNMP traps?

    It's not clear to me what the enterprise controller for Ops Center 11g can do with SNMP traps. The Advanced User Guide says the EC can use "SNMP to discover assets" but that's about the most useful bit of information I can find. Can the EC receive and act on traps from agent hosts? Can it generate its own traps and send them on to a different managment host? If the EC can't do this by default, has anyone tried using any scripts?
    Thanks,

    the last answer I received was to use the plugin with Oracle enterprise manager grid control / cloud control.
    what they didn't say, but it is in the documentation, is that only critical events are shared between ops center and oem. Yes you can see the database targets in ops center, and you can see the infrastructure targets in oem, but notification wise, only criticals. An of course you need to install both the OEM and the ops center agent on the target/asset. I have found that the plugin for ops center 12c and oem 12c doesn't actually send through any information at all, it will probably be fixed in update 1, but who knows.
    There is a 3rd party product, Halcyon, that can apparently integrate with ops center. I think they wrote an api.

  • Performance report in ops center.

    It is possible to create performance reports in ops center like PRM module in SunMC is doing for CPU Usage, Disk, Memory, Network.. etc.. ?
    Thanks
    Antonio

    Hi Antonio,
    You can also look at the Halcyon Neuron Performance Manager (http://www.halcyoninc.com/products/PerformanceManager/index.php). It hooks into Ops Center and/or SunMC to automate a lot of the reports (on top of what Ops Center provides out-of-the-box).
    Note: I work for Halcyon, but part of my day job is also deploying and configuring Ops Center, so I hope this post is considered relevant.
    Regards,
    [email protected]

  • Profit center is missing in profit center report

    Dear Expert,
    I created a billing , but the profit center document is not created automatically / missing. in fact I already maintained the profit center in material master, and also in OKB9 I have select the profit segment for sales account.
    I checked in the journal , there is an information about the profit center same as in the material master which i have maintained. but when i checked in the profit center report there is no such profit center data enter from that billing transaction, then I tried transaction using T-code 1KEK, error message occur "cannot post profit center xxx in Fiscal Year 2010". I have checked the period is correct and profit center is active.
    Please help.. why the profit center is missing?
    Thanks
    Pauline

    Hi,
    Check transaction 1KEF whether online posting of profit center document is maintained for current year or not.
    Regards,
    Sreekanth

  • Console redirection not working when ILOM is launched from Ops Center.

    Hi,
    I just installed Ops Center and added a few servers as assets. I'm having trouble to get console redirection when I start LOM Manager from within Ops Center.
    If I point my browser and login directly to a server's ILOM web interface, I get console redirection without problems. If I do it through the "Start LOM Manager" option in Ops Center, I get an error message: "Cannot launch Java application" when I try to start redirection.
    Is this normal behavior?
    Thank you for your help.

    Do you mean the 'Launch LOM console" from Action pane? If so, check your java version on the PC/laptop you are accessing OC from.
    What is your OC version?
    I am not finding any issue in accessing the ILOM console.

  • Install Oracle VM Server T4-4 from OPS Center 12c

    Hello,
    I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
    the process is never execute. From the cisco switch all is well done for aggregate the port.
    I have the following messages just after the first reboot.
    Is there a DOC or any idea will be appreciate.
    Thank's for help
    Willy
    Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a  File and args: -Z rpool/ROOT/solaris
    SunOS Release 5.11 Version 11.1 64-bit
    Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
    Loading smf(5) service descriptions: 205/205
    WARNING: svccfg apply /etc/svc/profile/site failed
    Configuring devices.
    Loading smf(5) service descriptions: 2/2
    Warning: Unable to verify add of static route on net2/v4
    Error code = 145
    Hostname: ddom12
    Here is my profile to aggregate.
    Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1         
    Load Balancing Policy : L3                         VLAN ID:  -
                                                                    NICs: 2
                                                                             3
    MAC Address Policy:  Fixed - Use Mac address of a specific NIC: 2
                                                                   LACP Mode:  Active
                                                                   LACP Timer:  Short

    Hello,
    I try to install my new server T4-4 from OPS Center with a New profile OS Provisioning. It start and work perfectelly, but when arrive the time to configure the Network in aggregate (net2 and net3).
    the process is never execute. From the cisco switch all is well done for aggregate the port.
    I have the following messages just after the first reboot.
    Is there a DOC or any idea will be appreciate.
    Thank's for help
    Willy
    Boot device: /pci@0/pci@0/pci@2/scsi@0/disk@3,0:a  File and args: -Z rpool/ROOT/solaris
    SunOS Release 5.11 Version 11.1 64-bit
    Copyright (c) 1983, 2012, Oracle and/or its affiliates. All rights reserved.
    Loading smf(5) service descriptions: 205/205
    WARNING: svccfg apply /etc/svc/profile/site failed
    Configuring devices.
    Loading smf(5) service descriptions: 2/2
    Warning: Unable to verify add of static route on net2/v4
    Error code = 145
    Hostname: ddom12
    Here is my profile to aggregate.
    Link Aggregation Name: aggr1                    Network: 10.8.0.0/14.1         
    Load Balancing Policy : L3                         VLAN ID:  -
                                                                    NICs: 2
                                                                             3
    MAC Address Policy:  Fixed - Use Mac address of a specific NIC: 2
                                                                   LACP Mode:  Active
                                                                   LACP Timer:  Short

  • Configuration issue with OPS Center installation on OEL 5 update 5

    Hi,
    I have installed OPS Center 11g on an OEL 5 update 5. All prereqs, i think, is met and installation gives no warnings or errors.
    When I try to access the web page to run the configuration wizard. It hangs with the "LOADING" message, after logon. And nothing more happens.
    In the bottom left corner of the browser i have the DONE message. But an error behind.
    Detaljer om feil på webside
    Brukeragent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; InfoPath.3)
    Tidsstempel: Wed, 12 Oct 2011 10:17:24 UTC
    Melding: Could not load 'dojo.nls.xvmdojo_nb-no'; last tried './nls/xvmdojo_nb-no.js'
    Linje: 53
    Tegn: 27
    Kode: 0
    URI: https://%server%:9443/emoc/js/dojorelease/dojo/dojo.js
    Melding: 'xvm.resourceBundle.jobManager' er null eller ikke et objekt
    Linje: 406
    Tegn: 40
    Kode: 0
    URI: https://%server%:9443/emoc/js/dojorelease/dojo/xvmdojo.js?11.1.0.1536
    I have removed the servername from the error.
    How can i solve this? I saw no dojotoolkit installation as an prereq.
    rgds, Kai
    Edited by: user465755 on Oct 12, 2011 3:27 AM

    Hello Kai,
    I am not sure to completely understand your logs since they don't seem to be written in English but
    could it be that you are using Firefox 4.0 ? ( only firefox 2 and 3 and IE 7 and 8 are supported ).
    Also, do you have enough free RAM ( 1-2 GB ) on the browser's machine ?
    Lastly, you can check the prerequisites with
    /var/opt/sun/xvm/OCDoctor/OCDoctor.sh ec-prereq force
    /var/opt/sun/xvm/OCDoctor/OCDoctor.sh --troubleshoot
    Cheers
    Jocelyn

  • Asset cost center assignment missing in purchase req or purchase order

    Has anyone else ever encountered this? 
    When we create a purchase requsition for assets, the cost assignment is determined from the existing asset. Most assets bring over the cost center into the account assignment. A few do not.  FMDERIVE shows the cost center populated when tracing. When you exit the derivation trace, the cost center is missing from the purchase requeistion or purchase order line item.  Any ideas? 
    PS: THis happens whether or not the asset has an entered serial number.
    Any thoughts of what to check are appreciated.
    Bob

    No, our FMDERIVE defaults Funds Center from Cost Center, which IS occurring, and, as stated above, the cost center appears correctly as expected on the FMDERIVE trace screen.. 
    Added info: In our test system we have reconfigured the ME51N entry screen to allow manual input of the cost center.  It is STILL automagically cleared during the save/validation process.
    Thanks for your question!
    Bob

Maybe you are looking for

  • How to do this in Motion 3 (or if it can be done at all)?...

    Try as I might, I have not been able to figure out how to do this in Motion. I have a 10-page pdf document. I've imported these pages separately into Motion. I want them to be spaced out and 'standing up' in Z-space. I want a camera to move around, h

  • Intercompany Stock Transfer - ship complete

    I have a need to force one delivery document to create per stock transfer PO.  All items are going from/to the same plants.  In comparing the functionality I am looking for to the SD side of the equation, I see three options to accomplish this. 1. In

  • Seeburger AS2 Adapter implementation in PI 7.1

    HI Experts, We have seen lot of implemetation of seeburger adapters in PI 7.0 but didnt got any chance to look ahead for any documents related to seeburger AS2 adapter implementation in PI 7.1 . Request if you can please guide or provide some hands o

  • Message Splitting issue (without bpm)

    Hi Experts, I was currently trying to create a message split (1 message --> 2 output) using BPM like in this blog: Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure Then i noticed that it was also possible to ac

  • Cryptsetup: "cryptab contains a literal encryption key..."

    I'm using full disk encrpytion (minus /boot) using luks. After a recent update I now get the following message on boot-up, when my data and home partions are decrytped: "cryptab contains a literal encryption key. This will stop working in the future"