EM12cR3: Compliance standards created in R2 (pre-upgrade) not editable (with workaround)

Just wanted to drop this out there in case anyone else runs into the same issue as I did and needs the simple workaround.
I have several compliance standards I created in EM12cR2.  After upgrading to EM12cR3, I am unable to add rules to those compliance standards.  Attempts to do so yield an error message stating "Compliance Standard Error" and "Standard (name) has been updated", as shown in this image: http://img163.imageshack.us/img163/4239/s113.png
Workaround:  Do a "Create Like" on your pre-R3 compliance standards and save a copy under a new name.  Associate your targets to the copy and disassociate them from the original.  The new compliance standard can then be edited with no trouble.

Hi Dave,
Thanks for the response.  I've been attempting to do this with the same user account as was used to originally create the compliance standard and to associate targets to it (my account has EM_ALL_ADMINISTRATOR, EM_COMPLIANCE_DESIGNER, EM_COMPLIANCE_ADMINISTATOR, etc so it should have all necessary permissions).  To try to rule out a permissions issue, I just tried to repeat this test while logged in as SYSMAN and I received the same error (both while adding a rule owned by a SYSMAN and while adding a rule owned by the original user account).  I've also confirmed that it occurs for both users even with no targets associated to the standard.  It occurs with both customized rules and with out-of-the-box rules that I have not customized.
This isn't a big issue for me (since everything works fine after a Create Like and moving targets to the new standard), but I do have a couple standards in my library exhibiting this behavior if you think this is worth an SR for support to investigate.  The workaround is flawless as far as I can tell, but maybe an issue for sites with hundreds/thousands of targets.  I only have 10 per standard so it doesn't take long to re-associate them to the new standard.
-Brian

Similar Messages

  • On the keyboard shortcut that I have created on my iPhone, do not synchronise with my iMac.

    On the keyboard shortcut that I have created on my iPhone, do not synchronise with my iMac.
    The document and it are setting in iCloud on my iPhone and my iMac is check marked properly.
    Please help me rectify this problem.
    This used to work perfectly in the past.
    Thank you
    Cyrus

    Did you take it to an apple genius bar or any apple ceritified repair center?

  • HT1386 Contacts created on the iphone do not sync with Microsoft outlook 2010 after i upgraded my itune

    til lthe time i was using the old version of itune my contacts, calender and Notes were sync properly with the Oulook 2010 that i have on my windows 7 machine. Once i upgraded the itune to the latest version my contacts that i modify or create on the iphone do not get reflected in my outlook contacts. Changes in calender and notes continue to work. itune doesnt give any error while sync.

    I have been unable to sync Outlook 2002 and iPhone 2G since I upgraded to 7.7 and 2.0. Don't want to have to upgrade outlook but will do so if I know it will work. Anybody not having the problem???
    I have spent hours trying to resolve. Please help

  • IOS 7.1.1 upgrade not compatible with Lexus?

    My Lexus dealership has informed me that the new ios 7.1.1 software upgrade is not compatible with their vehicle software?
    When does Apple expect to have this corrected?

    I have contacted the Lexus dealership and they informed me that since the 7.1.1 upgrade they have encountered many phone calls regarding this issue.
    They tell me that Apple must revise their software in order for this to work properly.

  • Please help with m-audio mobile pre driver not connecting with garageband08

    hey i just updated my powerbook G4 with leopard and lost my m-audio (mobile pre) driver in system preferences so i downloaded it b/c i don't have my original disc, the downloaded version shows in my system preferences now but won't appear in the garageband preferences audio/midi input, my only choices are built in mono/sterio. any ideas? besides finding the disc? i'd really appreciate any help as my band is trying to record a cd.

    Yeah, the Mobile Pre is not going to work on Leopard until M-Audio updates their drivers, unfortunately.
    There is one workaround that I've gotten to work, but it probably won't work for most folks. If you have two partitions on your system, one with Leopard and one with Tiger, you can get the mobile pre to work in Leopard. It's a bit odd, but it does work.
    First, boot into you Tiger partition that has the Mobile Pre drivers installed and verify that the system sees and can use the Mobile Pre.
    Now, boot into Leopard. Your Leopard system should now see the Mobile Pre and you should be able to use it until you have to reboot the Leopard system.
    If you have an external HD with Tiger installed, you might also be able to get this to work w/out having to repartition your system. Just install Tiger on the external HD, boot from it, then install the Mobile Pre drivers.
    Hope this helps and possibly provides some temporary relief until M-Audio updates their drivers....

  • I am seeing links appear inside my website that I did not create. This problem is not occurring with IE9 - just firefox. How can I prevent someone from putting these strange links in my site.

    Someone is putting links inside my website - I did not create these links and do not have any idea who has put them on my index page. How can this be prevented and how can the links be removed. I have overwritten the files but that does not help. This problem does not happen with IE9 or any other browser, I only see these links when I use firefox to load my site (prevailingword.net)

    Which links do you mean?
    I'm seeing nothing on the main page or are they on one of the other pages?
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    Do a malware check with some malware scanning programs.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
    <br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    See also:
    * "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • Form created in Acrobat Pro 8 not editable in Acrobat Pro XI

    I created several forms in Acrobat Pro 8, using LiveCycle Designer. I upgraded to Acrobat XI a few days ago when I learned it was unstable under Windows 7. I am now finding I cannot edit my existing forms in Acrobat Pro XI because it doesn't include LiveCycle Designer. This has apparently been moved into a separate product that will cost me another $300. Moreover, I can't seem to save my existing forms at Word documents to re-import them into Acrobat XI, so I can re-create the forms from scratch. I suppose I could print and scan them, but that will result in a less legible form.
    This loss of functionality and cross-compatibility between versions is disturbing. I feel I have just paid $200 to get less functionality than I had before.
    It also appears that the most expedient method for creating new forms in Acrobat XI is to upload them to FormsCentral. I am reluctant to upload these to a third-party server, and resent being required to do so in order to maintain any functionality.
    Is this an ill-planned marketing strategy to get people to buy another software package (which isn't happening in my case), or is there some work-around I am not seeing here?

    To create a form in Acrobat, you first create a PDF that you will be adding form fields to. Normally yo'd create the source document in a program like InDesign or Word, convert to PDF, and place the form fields where they need to go. Acrobat includes a Form Wizard that can attempt to add fields where it thinks they should go, but I rarely use it, preverring to add the fields manually. To do this, select: Tools > Forms > Edit
    and you'll be switched to form editing mode. At the top you'll see the various form field tools that you can use to add fields to the document. This type of form is known as an Acroform, as opposed to an XFA form (static or dynamic) that LiveCycle Designer creates.
    Acrobat 11 comes with the FormCentral form creation application that allows yo to create forms that can be used with the FormsCentral service. It allows you to export a form to PDF, which can be further edited in Acrobat. FormsCentral can also work with a PDF form (Acroform) that you create entirely in Acrobat.
    I think an Acroform is the more versatile type of the three mentioned since they have the widest support in the PDF viewers that are out there, but which you choose depends on your needs. Each have their advantages.

  • Palm Pre still not working with IMAP on Lotus Notes

    Even after Web OS 1.1 I still can not get my Palm Pre to Sync with my works IMAP Lotus Notes. We use a self siged cert, so I did a manual move of the cert to my Palm Pre (instructions I got on this site)  Next I instlled the cert  with the Cert Mgr. It installed fine. When I run a manual sync all I get is the yellow error triangle. It does pull down all my Lotus Notes  E-Mail Folders but no E-Mail. I know this config is fine, becuse I can duplicate the setup in my PC E-mail Cleint Thunderbird and it works fine to send a rec mail. Can someone from this site or Palm  Support help. I am going to have to move to the I-Phone if you can't get this working soon. Other people must have the same problem.
    Thanks Again....
    Post relates to: Palm m515

    Don't feel alone in this, I have the exact same issues, folders show up but not emails.
    I am a network engineer by trade and have tried all of the listed solutions and many unlisted solutions.
    I think its a case of IBM not caring about mobile phone users in general and IMAP standards in particular and Palm not caring  a great deal about Domino users with Palm Pre's because there are likely not too many of them. 
    But hey, they got their money from me for the phone so why should they care anymore?
    Some of us have to use Domino, no choice, we had hoped to use Palm Pre's.  I can get IPhones to work with Domino and IMAP so I guess thats going to be one part of the market Palm is going to lose... Its Palms choice.

  • PS cant open a file I created... "File not compatible with this version of PS"

    I built this file on Friday.  I tried to open it this morning and now I get this message.  "File notr compatible with this version of Photoshop."  I've tried restarting.  No luck.
    Any ideas what would cause this?
    Help please!
    I have a PC,  CS5  (PS 12.0.4 X64)
    12 GIGs RAM

    From your post I understand that you created this file on the same machine yesterday? Is that correct?
    Can you try to open it on another machine running Photoshop or maybe email it to me so I could check it for you?

  • D810 RAW conversion in LR 5.6 shows posterization at certain camera profiles: Camera Standard, vivid, monochrome that it does not show with identical photos from a D800. Is this bug already known?

    Never had this problem seen before in all my years of LR use. I use a test-chart with a continuous gray bar (from dark to light). Normally use Camera Standard profile to develop all my D800 RAW files with no problem so far. Got a D810 to test this week and did some tests using the same target. Suddenly there are some ugly posterization effects in the gray bar to be seen that can only be eliminated with heavy color-noise reduction or by switching to any other profile but Camera standard, Camera Vivid, Camera monochome.
    The following 100% crop shows the effect from a D810:
    And this is the same crop from a D800-shot:

    OK, after posting there was the right suggestion of other forum threads that took care of the issue:
    Nikon D810 & Lightroom 5.6 posterization issue with Camera Profiles
    So this thread can be closed.

  • SDK creating PDF files that will not print with pcl6

    We are using the PDF SDK 7.1 to create PDF files from our application on Windows. The PDF files mostly consist of PATH elements representing 2D graphics. We have customers that have trouble printing them from Acrobat on PCL6 printers, they either get a memory error, or an error that there is not enough memory.
    As a workaround, they have used Ghostscript to create the PDF files, then they have no problem printing the files. I am at a loss to see what could cause the problem. Are there tools to analyze a PDF file that could help? I tried PDF CanOpener, and it didn't help much.
    We are using PDSaveLinearized when we close the document. Any help, ideas or suggestions would be appreciated.
    Thanks,
    Keith Hafen

    What version of Acrobat is being used on what OS platform to print to what PCL6-based printer?

  • OS 10.6.8 upgrade not compatible with Canon iR8070 copier print engine

    Upgraded my Intel iMac to OS 10.6.8 Snow Leopard, finally. I am networked to a Canon iR8070 printer/copier and everytime I print to this machine I pauses the job. Canon says that they no longer support this OS and I was wondering if anyone has found a workaround, generic print engine that may work so I don't have to pdf the file and take it to another printer to print?

    Check out Gutenberg Printer drivers. You can find info at:
    http://gimp-print.sourceforge.net/

  • Palm Pre does not Sync with Exchange Server 2010

    Only folder architecture visible.  No content.  Is there a fix coming or workaround available?
    Post relates to: Pre p100eww (Sprint)

    This was reported recently in this thread:
    Pre and Exchange 14
    http://forums.palm.com/palm/board/message?board.id=wireless_email&message.id=8867

  • Why does Create PDF from Web Page not work with certain URLs?

    I'm creating a large number of PDFs from Web Pages on Adobe Acrobat XI Pro and occasionally come across certain URLs that fail to generate a web page.  The process begins as normal but eventually the status window lists a few errors or canceled processes and that there are now 0 Connections Active.  This only occurs for certain URLs, but when it happens it consistently fails for that URL (as in trying it a few mroe times doesn't let it work).  Is there any specific reason this happens or a way I can prevent it?  The above example is of a URL that fails to generate a PDF :
    http://www.pcmag.com/encyclopedia_term/0,1237,t=access+point&i=37393,00.asp

    I tested this in Acrobat X and the exact same issue occurs
    http://www.quantumdynamix.net/clients/image-map-test/ImageMapTest-AcrobatX.pdf
    This has to be considered a legatimate bug, especially since IMAGE MAPS is listes as one of the supported HTML features via the help files

  • Crossgrade Upgrade Not working with previous LiveType Media files

    I have recently received the crossgrade discs and was able to successfully upgrade FCP, Motion, DVDSP...however, when it came to LiveType...and requested the previous LiveType Media discs, the installer didn't seem to recognize the first disc, and spit it out, thus stalling the rest of the install...anyone else experienced this issue, or have any suggestions?

    None of what I posted you should need the device for. Now if you did not delete any folders then it should snap back to where the file was stored in the first place. If you still have issues it is possible for you to search for the files though windows. This maybe a little work around that you may need.
    If Garmin did not change any of the files types then this maybe the trick. Using the search function look for .dat or .bak you may find some under the palm/[Hotsync Username].
    Next thing would be to see if Garmin could help you. From what it sounds you just need to know where the file location is and an old forum board or KB just might help you.
    Post relates to: Treo 800w (Sprint)

Maybe you are looking for

  • HT2509 Font Book not working correctly? or Text Edit not working correctly?

    I downloaded a font onto Font Book and it works perfectly on Font Book and all the characters and symbols come up correctly, as they should. Then when I use it on Text Edit, it replaces the ', " and @ with a $ sign. What can I do to fix this, or is i

  • Itunes simply wont open ive tried everything even spoken to experts but it wont work help please...

    need massive help itunes hasnt opened for months now and need it to work but i CANNOT loose my music and pics etc so dont know what to do and i cant get ios5 without it ive done everything please help!!!

  • Folder that can't be used on Time Capsule

    I created a folder on my time capsule that makes all icons disappear when I save to it.  I can't delete the folder because it says that the folder is in use.  I've created other folders on the TC and don't have any problem with them.  How do I get ri

  • How to close a tab in a jtabbedpane?

    Hey all, how can i close a tab in a jtabbedpane with an close icon in the title of the tab (such as in JBuilder and LimeWire)? Thanks, Miklas

  • It just won't work.

    My problems started today. I normally use firefox, but cerently the constant 'update your plugins' page that insists on opening pissed me off. So I tried google chrome. For all of a minute. It's just too ugly, a complete eye sore. Well, it seems righ