EMac Display "red only"

I recognized, that the eMacs colour settings changed to a warmer tone, which could not be corrected using monitor settings control panel.
Suddenly the Display colour changed to red. No other colours but the scale from red to black. The device is 14 months old!
Changing the CRT is more than 500.- in Germany, which exceeds the limit for low-end hardware reparatures in my feeling.
But, maybe it isn't the tube? Can the video logic controller produce such phenomena?
Hope, that someone has an idea
Greetings
Karl Heinz

Hello Karl,
Try Resetting the PRAM. While I doubt this will help, it is worth a shot.
It really sounds like the Video Logic board is shot. This isn't going to be cheap to replace either. Take it in to a service center and see what they say. If it is the board, it will cost you less to buy a new computer.
Good luck,
Grant

Similar Messages

Displaying XBox through eMac display

Is there any way to display an XBox through my eMac display?

farmerdudley,
Welcome to the Apple Discussions!
Sorry, but no: the eMac's miniVGA port is output-only (to support mirroring to an external display using the miniVGA adapter).

MBPro w/Mini DisplayPort to Cinema Display w/only USB and Firewire ports?

I've searched the threads for something that will explain what kind of cable I need to use my Cinema Display with my MacBook Pro, and I'm not finding anything. The MacBook Pro has the Mini DisplayPort for video out, and the Cinema Display's only ports are two USB and two FireWire.
All of the video cables I've seen in the online Apple store are either Mini DisplayPort to DVI or Mini DisplayPort to VGA, neither of which would work. Tech support told me that the computer and the display are compatible -- can anyone tell me which cable I need?

I have been using the display for several years, connected to my G4 PPC Mac Pro. Now that I have a new MacBook Pro, I was thinking of getting rid of the tower and simply using the laptop.
The cord coming out of the back of the display is connected to the tower with both the DVI plug and two USB plugs. It didn't occur to me to look on that cord because my understanding was that there was a port on the display itself, and I always think of that cord as simply a power cord.
I understand getting a DVI-to-Mini DisplayPort converter cable, but the Cinema Display is apparently powered by the Mac Pro tower. Would a laptop be able to power the Cinema Display? And would I have to connect both USB plugs to the laptop? That would take up both of the MacBook Pro's USB ports.

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

How do I set up an indicator to display for only 1 second?

How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanks

Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code.

Display workorder   only related to   vendor selected in Vendor name UDF

Hi ,
I am using SAP 2007 PL 18 ,
In a Goods Issue Form I am created two UDF 1) Vendor Name 2) Work Order Nos .
Here queries related Workorder No. Display workorder   only related to particular vendor selected in Vendor name UDF .
Pl provide me FMS query.
Thanks
nitin

Hi Nitin,
My question is How you can know these Work orders are related to particular Vendor? Any relation is there between the Vendors and work orders?
Also what you calling as Work Orders? I think it is Purchase Order?
If it is PO, then try this
Select T0.DocNum from ORDR T0 where T0.CardCode = $[$OIGE.U_BPCode] and T0.Status = 'O'
The above query will show only the Open PO list. If you want all POs then remove the T0.Status condition.
Regards,
Bala
Edited by: Balakumar Viswanathan on Jan 3, 2011 11:13 AM

How do you display Movies only in iPhoto?

How do you display Movies only in iPhoto?

Create a Smart Album like this (depending on your iPhone model)
You'll see your iPhone pictures and all movies in the library.
OT

Air Display 2 only worked on mirror mode not second monitor

I'm using PC Win 7 enterprise and IPAD Air. IPAD Air installed with Air Display 2.
The Air Display 2 only worked fine when on 'mirror mode', but not working as secondary monitor. IPAD display colour in 'blue' and able to activate the keybaord.
Need tips how to fix the problem to work as extended monitor.

Hi Nagesh,
    Please check the following sample programs. It uses splitter container. I think this suits your requirement.
RSDEMO_EASY_SPLITTER_CONTROL
RSDEMO_SPLITTER_CONTROL
Sample code:
       split_container_left type ref to cl_gui_container,
       split_container_right type ref to cl_gui_container,
       splitter_h type ref to cl_gui_splitter_container,
       splitter_v type ref to cl_gui_splitter_container,
create object splitter_h
          exporting
          parent = cl_gui_container=>screen0
          rows = 5
          columns = 5 .
split_container_left = splitter_h->get_container( row = 1 column = 1 ).
split_container_right = splitter_h->get_container( row = 1 column = 2 ).
        create object splitter_v
           exporting
           parent = split_container_left
           rows = 5
           columns = 5.
Please award points if this is useful.
Thanks,
Srinivas.

Requirement is OB52 should be in display mode only

Dear Experts,
In sap users profile sap_new is required but OB52 should be in come in display mode only on PRD system, How can I provide the t-code OB52 for Disply only.
Regards,
TVS

Hi,
If SAP_NEW given to any one,then we can't change it to display mode.OB52 is purely depend on type of
System.In PROD system it will come in change mode only.Where as in other Boxes like DEV/QAS,OB52 will be accessible depend on Client state(SCC4).
So I guess it is not possible in PROD box after giving SAP_NEW.
Rgds,
Durga.

SXMB_MONI displays Errors only

hi all,
Due to some reason SXMB_MONI is displaying ERRORS only even if I select all the messagse. Is there a config setting that need to be changed ?
Please advise, Thanks.
FS

On SXMB_MONI Screen, Make VIEW Button = Standard
Make Length of Output List for 2000.
Status Group & Status, Make these BLANK.
Date from - give date of 1 year back.
SENDER & RECEIVER, make it BLANK.
& RUN.

Page cannot be displayed message ONLY on the content area of the portal

Hi All,
I am using Netweaver Portal 7.0 and the portal works fine if logged in as an end user. But when I'm logged in as Administrator and whenever I try to create a portal object (iview or pages etc), I get a page cannot be displayed message ONLY on the content area of the portal. It is happening quite frequently, any clue what is wrong here?
Thanks for your help
-Mike

Hi
This could sometimes happen because of multiple users working on the same content .
Edited by: chandana kallu on Mar 11, 2008 1:41 PM

How do I display something only if javascript is enabled?

Hi. This may be a dumb question, but I haven't been writing code all that long. Anyway, I am creating a custom online store. I used the spry menu bar to create a menu bar for the product categories. The tutorials I had been watching about how to use the spry widgets said that it's a good idea to create alternatives incase somebody doesn't have javascript enabled, so I created an alternative navigation system. The problem now is, I only want to display the spry menu bar if javascript is enabled. I know I can use the noscript tag to display the alternative navigation system is javascript is disabled, but how do I display something only if javascript is enabled?

I tried that and it doesn't seem to be working. I tried it as:
<div id="navigation">
   <script>
<?php publicNavigation(); ?>
</script>
    <script type="text/javascript">

</script>
    <noscript>
    <?php
     startNavigation();
?>
    </noscript>
</div>
and as:
<div id="navigation">
<script type="text/javascript">

</script>
    <noscript>
    <?php
     startNavigation();
    ?>
    </noscript>
</div>
In either situation, nothing shows up where the menu bar should be. I know I have javascript enabled so that is not the problem. How do I get this working?

Why did column host display red in list of Tcode st22

dear expert,
Suddenly i found a question. It was why in some dump column host displayed red when i excecuted st22 . But some did not displayed red host.
Hope to answer.

As far as I know it shows red when you are logged in the application server where the short dump occured. Same happen with the username, if the short dump belongs to you will show red.
Regards
Juan

BASIS- Give display rights only to FBCJ(Cash journal) Tcode

Hi,
I want to restrict transaction FBCJ(Cash journal) in display mode only.
I created a test role and added only FBCJ Tcode.
At object level (F_FBCJ), I maintained as below
Activity 33(Read)
Authorization Group * (only * selection is posible)
When this role is attached to a user( he has only this role), he is still able to change and save cash journal.
What to do to give display access only ?
Thanks in advance
AshrafKT

I know it s an old post, but for future references here is the answer.
If you need only display, transaction FBCJ3 can be use.
If other activities are needed then FBCJ needs to be used, but in order for the object F_FBCJ to work, the authorization group should be set in every journal.
The authorization group can be set using the transaction FBCJC0.
Hope this helps.
Regards, Jose.

Batch Input Session - Display Error Only - SM35

Dear all,
Need to do material master extension in MM01 and considering batch input session using mode 'display error' only.
However,do have a concern on its performance or run time. In SM35, running in display error only mode - will there be any time out error like the ones encounter in abap reporting ?
This is because, we will be dealing with a huge volume of data (round 2,000). Therefore would like to know, if there would be any possibility that the bdc session in sm35 will experience a time out or not .
Appreciate it if you could shed some lights on this. Thanks in advance.

Hello there,
Executing MM01's batch job in background wasn't really an option. This is because, this error was encountered "Control Framework: Fatal error - GUI cannot be reached".
Had done a search on this -- and it indicates that in background mode there isn't GUI involved. Searched result also shows that this error appears when its comes to screens with text ie. Purchase Text or Sales text. Nope, no BDC on entering text involved.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=164902&hilit=ControlFramework%3AFatalerrorGUIcannotbe+reached
Therefore the option am considering is executing the batch job in "Display Error Only". Nonetheless, am not too sure if this will cause time out. The other reason as to this option is that -- we initially introduced CALL TRANSACTION for extending material in MM01. However, functional feedback that it was slow.
Kindly advise - thanks in advance.

EMac Display "red only"

Similar Messages

Maybe you are looking for