Emac display startup problem

Hi, I am having a problem getting my emac desktop to show up. It seems to be taking a long time to load up with a grey screen apple symbol and winding circle, then to the next screen which has the mac OS X square and loading bar -- then to the desktop background but no files show up -- the whole process takes about 5 min to get to this stage. anyone know what the problem is? I have alot of files and folders sitting on my desktop, maybe this is the issue?

Bobby K,
Per roam's suggestion of an overloaded/corrupted Desktop, if by waiting long enough you can get the Mac to start normally, try Neil's tip in this thread. If you can access a second Firewire-equipped O X Mac to use roam's tip about FireWire target disk mode, you can move /Users/yourusername/Library/Preferences/com.apple.desktop.plist to the TRash or a holding location to force creation of a new default Desktop.
In general, I'd suggest you avoid saving files directly to the Desktop and instead use a download or holding folder on the Desktop, or better, a download folder in your Documents folder with an alias to that folder on the Desktop.

Similar Messages

Emac battery / startup problems

Hi everyone I am having a strange problem with my emac,
Basically when I turn it on it either:
Turns on the straight back off again with no image on the screen
or
Turns on "bongs" displays nothing on the screen then turns off after a few seconds
or
Turns on "bongs" displays nothing on the screen then just stays powered on till i hold down the power button for 5 secs
or
Turns on "bongs" goes to the white screen with the apple then hangs untill I hold down the power button for 5 secs.
or
sometimes it boots up ok.
If I unplug it for half an hour and can get into the OS it resets the clock to 1970.
This would suggest a PRAM battery problem? However I have changed the battey and also tested the voltage of the old battery and the new one both in the mac and in my hand both read 3.8v
I have also reset the PRAM and PMU.
Also tried swapping the RAM chips for some others.
I'm stumped any one got any ideas?
Cheers
Shayne

if none of those things worked then it's my guess it's probably a power supply problem. do you have anything hooked up to the emac at this time? you sound pretty savvy and i'm sure you've disconnected everything. at this point i would simply take the emac for repair. [ 8 ) ]

Can anyone diagnose my startup problem from this screen pattern?

After failing to startup my Mac on about 8 consecutive attempts today, I finally got it to boot up, and now I'm afraid to turn it off for fear that I won't be able to re-boot.
Here's a photo of what kept happening:
http://www.doctorkeys.com/startup-problem-screen.html
This screen came up immediately, along with the spinning cog and the apple logo, both rather faint. But then those two disappeared, and all that was left was the gray screen with the pattern as shown in the photo. And that's as far as I got each time.
The display itself seems to be fine, because even when I couldn't use it with the Mac Pro, I was able to hook it up to my MacBook Pro and it worked fine.
Can anybody tell me what's happening?
Thanks,
Bruce Siegel
Message was edited by: Bruce Siegel

Hi-
To be honest, though, I was hoping that the pattern in the photo was so specific and common that someone would look at it and say, "Oh, of course! I've seen THAT one before. Do this and your problem is solved."
I have seen graphics cards produce that type of screen as a result of a few of situations.
One, if the card is miss seated.
One other is if a capacitor on the card has failed, while VRAM failure is another cause.
The first case is easy to fix; remove and reseat.
The second and third require replacement of the failed graphics card.
Cleaning the gold contacts with 99% isopropyl alcohol and thoroughly dusting the card while it is out is a good idea.
I have been able to replace a bad capacitor to restore a card, but luck was a big part of determining which one it was....

G5 Dual 2.3 PPC Startup problems

Hi
About every other time I start up the computer, nothing comes on the display, and within 1-2 minutes the fans start to accelerate out of control. I then push and hold the start button to abort the startup.
After 10 seconds I startup again, and then it starts up right.
What could be the problem? I am afraid that someday it won't start up at all, which is a big problem since I am running a recording studio, and need to have stable gear.
Thanks
-Sorkin

I wish there was a "User Reference Library" of tips and links to most helpful threads and "stickies" for how to troubleshoot these types of problems.
A recent thread on startup problems (which should make good reading and have most of the ideas and tips)
http://discussions.apple.com/thread.jspa?threadID=2113312
4 yrs old and battery, internal condition, dust
how well the system is backed up and maintained
preventative maintenance routine - regular use of Disk Warrior and CCC/SuperDuper
A list of links often recommended to deal with battery, SMU Reset, AHT, Safe Mode, Repair Permissions, etc.
http://support.apple.com/kb/HT1436 SMU Reset
http://support.apple.com/kb/HT1573 No Video
http://eshop.macsales.com/item/Newer%20Technology/CR2032/ pram battery
http://support.apple.com/kb/HT2580 PDFs DIY
http://www.thexlab.com/faqs/aht.html AHT
http://support.apple.com/kb/HT1455 Safe Mode
http://support.apple.com/kb/HT1564
Of course having SuperDuper and Disk Warrior can be considered essentials to health of Mac OS X systems and an emergency boot drive to handle all the maintenance and repairs, goes without saying.
Can you test the battery and see if it is weak charge?

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

I am having a Startup problem. Someone comes on the screen with Open Firmware to Startup. How can I reset the PRAM myself to solve this problem?

Read these.
http://support.apple.com/kb/HT1431
http://reviews.cnet.com/8301-13727_7-10330118-263.html

Dual Monitor Startup Problem on MacPro - Solved

I have a model 53135LL/A = mid 2010 MacPro with 8 cores, DUAL monitor cards and monitors, 24GB memory, running Lion 10.7.3. It is important to note that I am also using the Apple bluetooth Magic Mouse and the smaller, bluetooth keyboard (no numeric keypad). This unit was supplied with Lion in December 2011 and has had a startup problem from the beginning as follows:
1 - when starting from a cold start the dual monitor positions are reversed from the correct position
2 - additionally the USB and firewire connected devices (e.g. Wacom tablet, 2 card readers) do not function properly.
The workaround for me has been to start the system, wait for the logon screen, then click restart. Upon restart everything comes up and functions correctly.
Specifics on my setup and starting problems:
1 - My main monitor (Monitor #2) is a large gamut monitor that is located to the right. This monitor is connected to card slot 1 as that is the faster card slot (pcx16). The second monitor (Monitor #1) is an ordinary unit and connected to card slot 2 (pcx4). The monitors are set up as an extended desktop.
2. The Wacom tablet (Intuous 3 wide) is connected to USB port on rear of machine. CF card reader by Delkin is connected to Firewire on rear of machine, and an SD card reader is connected to USB on the rear of the machine.
3. My dock is positioned on the left side of the left monitor. The menu bar is along the top of the left monitor, and all desktop icons are on the left monitor. The right monitor has no items on it.
On a typical cold start, as mentioned above, the apple logo appears on the right and then the logon screen appears on the right.
If I proceed to logon at that point, all the desktop items move to the right monitor and the computer thinks the positions are reversed. In other words, it behaves as though the right monitor (#2) is on the left of the desktop and left monitor (#1) is on the right.
Additionally, the Wacom tablet using either pen or mouse does not map over the full desktop range. If I use either card reader and then eject the card, no further card insertions will be recognized.
To fix this, I simply restart the machine thru the apple menu and everything comes up correctly.
I had discovered, that instead of completing the logon on a bad cold start, I could simply restart from the logon screen and all would work correctly.
On occasion, the logon screen would come up on the left monitor (as it should do) and in that case, if I log on all works correctly.
I have worked with Apple support on the phone, clearing setup ram etc. Have had the unit in to Apple store for hardware check, all OK. Next suggestion was reload OS and start over - no thanks.
SO - Here is the latest.
If I turn off my keyboard and mouse before starting the machine, then wait for the logon screen to appear - It starts correctly, with the logon screen on the left. I can then turn on my keyboard and mouse and all works as it should.
Bottom line - there appears to be a startup issue with Bluetooth devices from a cold start. Note that once the machine has been used for a bit, I can turn it off for short periods of time (e.g. 30 minutes) and it will start correctly even with the mouse and keyboard turned on.

mkaito wrote:
That's how dwm behaves. I believe dwm's multihead support is rather lackluster out of the box. You might want to check out some of the patches they have, and ask around in the dwm hackers thread.
I currently have dwm simply draw status on all monitors, but I'm investigating separate status bars per monitor. We'll see where that takes me. Dwm is a tinker's WM!
i found the patch , thanks!

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB

After a startup problem with my macbook pro i put it as slave and formatted the internal Hard drive. Now i want to install OS X Mavericks from USB
How can i do that?

What did you "put as slave?" What Mac model do you have, exactly?

Facing "Display Flickering" problem with my 15" macbook pro(A1286)while swapping the desktops and closing the tabs.....need help...reply soon

Suggest Solution for this Display Flickering problem ....

Hi, I read the post about calibration and I probably do that a little too often TBH! As I get so little time out the battery and mainly use my MBP on my lap, usually with the power supply near by, it gets charged to full, run to empty to the point of sleep, or sometimes it even cuts out and then is recharged to full again, so I really think it's new battery time. I've seen non Apple Official ones for between £35 and £65 that have 3 year warranties and state they are around 5200mh but am unsure due to reviews.
Later...
Anyway's I have now ordered a non Apple replacement from Amazon for about £35 and it has several good reviews and 4.5 out of 5 stars so I'll see if it works and report back. If it doesn't I'll send it back and get the Official Apple one.
Message was edited by: Missy Steph

Startup problem with Lion OS 10.7.3

Just recently, I've been experiencing a startup problem with Lion. I don't usually have any issues running my Mac, so I'm at a loss why this is happening now.
I have an Intel Mac Pro running 10.7.3. I usually leaving my Mac running all the time and only restart when the need arises. In addition to being my main computer, this mac alsocontrols a MacMini that serves as a music server thru screen sharing.
This past weekend, I restarted my Mac and could not get past the grey screen. The mac chimes, the apple logo appears with the spinning gear, the blue screen briefly appears, but instead of progressing to the desktop it reverts to the grey screen with a repeating cycle of the spinning gear appearing (spins for a while, stops, disappears, reppears spinning, stops, disappears, over and over) - never progressing beyond that stage.
I decided to reinstall the system and things have been fine for the past few days. Today, restarting again resulting in the same problem.
I've tried several things without success. I disconnected all peripherals, reset the PRAM/SMC, ran Disk Utility from a install volume and ran repair and permissions (no problems reported). Tried safe mode startup - a progress bar appeared but never fully progressed and could not get to the desktop.
Recent changes included updating the OS to 10.7.3 and Adobe Photoshop CS5.5 - no recent hardware changes. No bluetooth devices connected.
Any thoughts? Thanks -

Thanks -
I've reinstalled the OS today and am back up and running.
But, since this is twice this has happened within the past week, I'm worried about might be causing this issue - besides bad luck. My Mac is usually rock solid - can't remember the last time I've had to reinstall the OS in the past few generations of OS X.

Macbook display color problems

macbook, mac os 10.5.8 updated, display color problem. when i try to fix it by color sync. it says:
/Library/Application Support/Adobe/Color/Profiles/DCDM_X'Y'Z'.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
/Library/Application Support/Adobe/Color/Profiles/DCI_P3.icc
Tag 'A2B1': Requiredtag is not present.
Tag 'B2A1': Requiredtag is not present.
Tag 'A2B2': Requiredtag is not present.
Tag 'B2A2': Requiredtag is not present.
Tag 'gamt': Requiredtag is not present.
The file is locked. could not be fixed.
Repair done - 0 out of 2 profiles fixed.
Kindly assist what to do.

Welcome to Apple Discussions!
Pictures would help. A good way to do this is to post them to a free photo sharing site like Flickr and then post a link.
Also, you are in the original MBP section, and I think you need to post your question in the newer MBP section:
http://discussions.apple.com/forum.jspa?forumID=1294
Good luck!

Httpd startup problem

iAS 9i on Sun Solaris
Oracle 8i (8.1.6) on W2000
http port = 7777
After installing iAS 9i on Sun Solaris, i get startup problem with Apache http:
'Syntax error on line 14 of /export/home/ias/isuites/Apache/Apache/conf/mod__ose.conf: AuroraService - directive already in effect for this server'
'httpd could not be started'
After disabling the 'AuroraService inst1_http' in mod__ose.conf file, the Apache http did startup without any problem.
But unfortunedly i can't open http://<host>:7777/pls/portal30.
Any help will do...
null

Thanx Mukul,
You're right, mod__ose.conf appears twice in oracle_apache.conf.
Apache http started now.
But still i can't start the page:
http://myhostname:7777/pls/portal30
The DAD for portal30 is configured with Oracle username: portal30
Oracle password: portal30
connect string: tml000 (is the same as in portal30_sso and is defined in tnsnames.ora)
error message:Internal Server Error
Instead the page http://myhostname:7777/pls/portal30_sso is starting well.
These messages are in error_log: Exception in thread "main" java.lang.NullPointerException
at org.apache.jserv.JServServletManager.load_init(JServServletManager.java:526)
at
org.apache.jserv.JServServletManager.loadServlet(JServServletManager.java:488)
at
org.apache.jserv.JServServletManager.loadStartupServlets(Compiled Code)
at
org.apache.jserv.JServServletManager.init(Compiled Code)
at
org.apache.jserv.JServServletManager.start(Compiled Code)
at
org.apache.jserv.JServServletManager.main(Compiled Code)
Please help.....
null

Startup problems--time for a new machine?

I have an imac G5 that I bought last February. In the last few weeks I've been experiencing serious startup problems. When turned on, the screen goes gray and the lines and pixels fragment and shimmer. It takes a long time to go to the main screen and often the screen isn't stable and freezes. It takes me eight to ten startups to get the system stable.
I've repaired disk permissions, repaired h-drive, reset Pram. Still a mess. My husband wants me to just get a new one and get something that is not an Apple this time. I'm resisting that.
I don't want to lose all my data and I've backed up what I can but I'm worried the data is corrupted and if I load it on to a new machine, I will experience the same problems.
Any advice? I'm not even sure if this is a hardware or software problem. I'm out of warranty so I am on my own, but I'm frustrated to be having these problems with such a new machine.
Thanks for any advice,
Cassandra
iMac G5 Mac OS X (10.4.6)

Cassandra, in addition to Barbara's excellent suggestion: looking to see if you qualify for the program, please make sure that you have an external FireWire drive and clone your drive, (SuperDuper is an excellent choice for backing up, cloning and making scehduled backups).
Let us know how you made out,
Miriam
Rev A 20" iMac G5, 15"iMac G4, 15"iMac G3 DVD Mac OS X (10.4.6)

Displaying XBox through eMac display

Is there any way to display an XBox through my eMac display?

farmerdudley,
Welcome to the Apple Discussions!
Sorry, but no: the eMac's miniVGA port is output-only (to support mirroring to an external display using the miniVGA adapter).

Startup problems w/ Power Mac G4 (QuickSilver 2002) M8667LL (dual 1 GHz)?

Startup problems w/ Power Mac G4 (QuickSilver 2002) M8667LL (dual 1 GHz)
Starts up with bong and then a long wait then screen comes on with old time smiley Mac and spinning beach ball then another long wait and then OS X loading bar and then a panic screen. Subsequent start, bong, and then hard drive spins for 6 or 7 minutes, then hard drive stops and then nothing. Could this be symptomatic of a hard drive failure?
Thanks very much.

I am pleased to report that I think the problem has been solved. Apparently the strange behavior can be attributed to overheating. After some on line research and the help of people on this list I opened the case and found that the logic board fan was clogged full of lint and dust. After cleaning it I discovered that the fan is inoperable. The computer is now operating with the case open and a small electric fan directed at the logic board heat sink. The computer has been operating flawlessly now for several hours. Will have to replace the bad cooling fan and clean the computer regularly. Thanks so much to all of the people who have responded to my request for help. Would like to mention that a firm with a canine connection charged me over a hundred dollars to report that their diagnosis is a faulty logic board.
Thank you.

Emac display startup problem

Similar Messages

Maybe you are looking for