EMac external display

i want to use my tv as an external display for my eMac using vga, and i was wondering if there would be any resolution problems with this?
i have a 26inch tv.

First, are you aware that (without hacking the eMac, anyway) you cannot use an external screen as a separate display? Any external screen will mirror the computer's display? You may already know, but just wanted to make sure.
Anyway, as long as the TV will support your resolutions your eMac supports - up to 1280x960 @ 72Hz - the TV should work.

Similar Messages

Emac 1.42 ghz external display mirroring will it solve dark display problems ?

I have an emac 1.42 ghz and the display is getting dark I have the contrast turned all the way up and the contrast turned up one notch in the universal access. When the computer is shutdown sometimes when it starts back up it is very dark almost unusable until it warms up or is running for about 20 minutes. Then it is normal. If I use an external monitor on the mini vga port with an apple adapter will it have the same darkness/display problems. I really like this computer but if the external display wont fix the problem I will need to wipe the drive while I still have a useable display

I'd say it's likely to help using a different monitor.
I think you could possibly check by doing a Screen Capture, which I believe gets it frm the graphic card, then view that capture on aniher computer, or post it here for us to view.

Using an external display

Whats the highest resolution external display that the eMac can support? Because I wanted to use the external display as a main screen and set the eMac in the floor.
Also, does anyone recommend a widescreen external diplay?

Hi cosmic,
when I was still using my eMac I had it hooked-up to 23" monitor & the rez. on that one was 1440 x ? (don't remember the height). I was surprised that it could do it (that's why I can remember the width).

Can not properly view cover flow in full screen in external display

My mac is the new Mac book pro 15.4 inch screen and I connect my mac pro to external display e.g. Samsung LCD monitor 24 inches.
The bug is that I can not PROPERLY view full screen (in external display) for some application e.g. iTunes, and Front Row.
- When I use iTunes, I can not properly view Cover Flow view in full screen (in the external display screen) except the case of mirror display.
- For Front Row, I can not view full screen in external display but only my mac display.
However, for other DVD or VDO players, I can view movie on external display in full screen and I still be able to do other works on my mac screen.
Please let me know how to solve it.

found the likely issue! are you participating in youtube's html5 trial? go here and it will tell you if you are:
http://www.youtube.com/html5
exit the trial and it should fix the issue. it worked for me!

How do i use an external display with my macbook pro?

How do I use an external display with a macbook pro?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

Connecting a MacBook to an external display or projector

I have tried to connect my MacBook to a projector and to a TV using the mini-DVI to Video adapter, both with the same poor results. Here's the steps I took:
- Turned on the TV
- Connected the video cable to the TV "video in"
- Connected the video cable to the MacBook with the mini-DVI to vieo adapter
- Opened the MacBook
- Turned it on
The MacBook boots up, the MacBook resolution changes and the video on the TV is distorted, showing essentially three images of the MacBook display. Any attempt to adjust the resolution using system preferences just makes it worse.
Has anyone had success using a MacBook for presentations using either a TV or a projector and, if so, what procedure do you use to connect?

Greetings from Hong Kong-
I have a major presentation to give in a couple of days and have NOT been successful connecting to an external display. I am starting to freak out. Any instructions would be helpful!

DVD player full screen on external display

I'm looking for a way to play my DVD full screen on my external display while I can work in other apps on the main screen. Preferrably with Apple DVD Player (OS X 10.7 Lion in my case). Any ideas? Hidden settings perhaps?
It's stuff like this makes feel let down by Apple. It's natural feature to want this like for instance when playing DVD on a big screen in front of an audience and prepare something on the main display for viewing.

I know I can do this already with VLC. For some discs that don't play well in VLC I'd prefer DVD Player though.

Disconnecting from external display changes background, disconnect server shares, inactivates desktop icons.

I have a user working on a MacBook Pro, Lion OS X 10.8.2, connected to an external display. When disconnecting from the external display the background picture changes, he can’t open documents saved to desktop, and the connection to the server shares is lost. Rebooting does not resolve the issue while it is disconnected from the external display. If he reconnects the MacBook back to the external monitor sometimes he has to reboot to get everything back to normal. It almost seems like it is logging him into a different account or profile or something like that (please excuse my messy terminology as most of our users are still using PCs). However if you look at what account is logged in, it is still the same account that he logged in with that morning. The Mac is not authenticating to the network, just connecting to server shares. Has anyone experienced this issue before and if so is there a fix for it?

The Mac has a long history of assuming that ANY adapter still present means the display is still present -- you need to remove the adapter as well as the cable, if present.
So my theory articulated above is that the disconnect is not registered correctly. This would mean that the second display is still seen as present. You could check this by invoking:
System Preferences > Displays ...
and looking for the Arrange pane (shown above) which is ONLY present when multiple displays are attached. More detailed information can be found in About this Mac > ( More info ) Graphics & Displays ...
... specifically the NAME of each attached display is shown or an indication (no display connected):
ATI Radeon HD 4870:
Chipset Model:          ATI Radeon HD 4870
Type:          GPU
Bus:          PCIe
Slot:          Slot-1
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          ATI (0x1002)
Device ID:          0x9440
Revision ID:          0x0000
ROM Revision:          113-B7710C-176
EFI Driver Version:          01.00.318
Displays:
Cinema HD:
Resolution:          2560 x 1600
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          CY8360UFXMP
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Display Connector:
Status:          No Display Connected

Disconnecting MacBook from external display

Is there anyway to disconnect the Applr LED external display from the MacBook pro without having to shut all the way down or is is safe to just yank the mini display out while running?

I've always just unplugged the display with no problem. The screen may go dark for a second as the system brings all the open windows over to the one screen (if you are using it as a second monitor instead of mirroring), but that's about all.
The only thing you have to watch out for is if you have any USB peripherals that are connected via the monitor. Then you need to be more careful.

HT4108 Unable to read a movie from my iPad to an external display

Hi everyone,
I fear the worst here. I downloaded a TV show from iTunes and watched it fine on my external display (a full blown HD tv). Then I downloaded an HD movie from the iTunes store but my iPad2 says it's unable to play protected content. What gives ???
Is there a work-around to this or does my gut-feeling tell me Apple has restricted the use of an external display for some commercial reason ?
What's the point of buying full HD content if you can't watch it on full HD gear ?
Thanks for your thoughts on this !

try this:
redmatter
This helped meRe: not copied to iPad because you are not authorized for it on this computer
Nov 20, 2011 10:41 AM (in response to hoppo72)
One workarwound is to do the following:
1. Remove the digital content from iTunes (but keep the files)
2. Rename all .m4v files to .mp4 files
3. Add the files back to iTunes
This seems to fix the problem for me
Hope this helps

How can I use an external display with my MBP lid closed and disconnected to power?

I know that I can use an external display when my MBP lid is closed and it is connected to power. I was wondering why it does not work when the power cable is removed.
I only use an external display when I am at home so my MBP acts like a Mac Pro or Mac Mini in that way, but it is not good to leave the battery charging constantly on a MBP so I want to disconnect the power and use external display and have the lid closed. Is this possible or do I have to leave my lid open when running on battery power?

I'm plugged into my wall socket at least 90% of the time - probably more. I always make sure that I take my MBP off mains about once every two weeks and let it run down to about 30-40% and then plug it back up. This keeps the ions flowing and the battery healthy. My MBP will be one year old on March 20, 2013, and my battery health is still at 99%. I run in clamshell mode most of the time now - since I bought a 27" Apple Thunderbolt Display. Only occasionally am I off mains - and then because I'm exercising my battery, usually.
Don't worry about running of mains most of the time - just be sure and unplug about once every two weeks (or twice a month) and let your battery dip to the 30-40% mark and you'll be fine.
Good luck,
Clinton

How do I view an external display with my macbook pro closed?

How do I view an external display with my macbook pro closed? I am using a wireless keyboard and trackpad, and I would like to use a larger (Dell) monitor with my Macbook Pro closed.

Here are the rules for Clamshell mode:
http://support.apple.com/kb/HT3131

How can I disable the internal display on my MacBook Pro with connected external display?

I used this metod with the MagSafe power cable connected (see http://osxdaily.com/2012/06/15/yet-another-way-to-turn-off-internal-lcd-display- of-macbook-pro-with-lid-open/).
Open System Preferences and click “Mission Control”, then click on “Hot Corners”
Select a hot corner and pull down the menu to select “Put Display to Sleep”
Now connect the external display to the Mac and move the cursor to the newly created sleep corner to turn off the internal display
Close the MacBook lid and wait a few seconds before opening the lid again, the internal display should stay off while the external display will be powered on
This worked great under Mac OS X 10.7.4, but after the last update to 10.7.5 it doesn’t work more. The built-in display turns off really, but a few seconds after opening the lid it lights up again. Do you have any suggestions? Dimming the brightness or clamshell mode is not very useful.
MacBook Pro 13-inch,
2,7 GHz Intel Core i7,
Mac OS X Lion 10.7.5 (11G56)
Thanks!

I have the same problem: not able to work with my external display mirroring the internal one - while shutting the internal display off.
I believe there is an issue with Mac OS X Lion 7.5 that Apple needs to solve, since apparently it does not happen with this version of the OS only...
https://discussions.apple.com/thread/4315808?start=45&tstart=0
Or any other way to solve it?
Mac Book Air, 13-inch Mid 2011
Mac OS X Lion 10.7.5 11G63
Thank you!

How do I put an external display to sleep when I am using my MacBook Air for presentation?

How do I put an external display to sleep when I am using my MacBook Air for presentation? I do not want to go to the projector just to turn it off and turn on again after a while? Is there a keyboard shortcut for that?

I want to be able to sleep the external display and at the same time do things in the MacBook.( This feature is useful for me so that I can prepare some things and so that my audience will not see what I am about to show them.)
Is there a feature for Mountain Lion?

How can i drive 2 external displays with my macbook pro?

I just purchased an Macbook Pro and wanted to know if there is a solution to drive 2 external Apple
Cinema Displays simultaeously. (Set up so displays operate as 1)?

I believe the TripleHead2GO requires all three external displays to be identical. Verify this with a call to Matrox. There is also a maximum resolution limit for the three displays together, which you'll want to be sure is acceptable to you and will look OK on your monitors. Ideally, the maximum resolution the TH2Go supports for each display will be the maximum resolution each display is capable of when used alone, because the displays will be sharpest at their maximum resolutions. If used at any lower resolution setting, they will be noticeably blurry.
I'm not aware of any other three-display options for the Mac that enable the monitors to operate with normal responsiveness (USB video adapters are slow). Yes, the TH2Go is expensive, and that's probably because it's the only game in town.

EMac external display

Similar Messages

Maybe you are looking for