EMac G4 700 speakers working intermittently

Today the speakers on my eMac 700 are working fine, but for most of this week, an hour or two after awaking from sleep overnight, they produced no sound. The iSub worked fine and I could get full sound through headphones. Naturally, I'm delighted to have sound againI've been running iTunes at strength for the past five and half hoursbut I'd like to know what the problem was; I anticipate that it will occur again.

Hello Keith,
Welcome To Apple Discussions!
If passable I would take it into a Apple repair shop and have them have a look at this problem you are having.
- Terry

Similar Messages

I would like to get siri working on my 3G iphone 4s and since upgrading to ios 7 my speakers work intermittently can anyone help me please

I upraded my 3G iphone 4s to the ios7 and have had trouble with the speakers working on and off and I would like to know how to get siri and would like to know how to do that so that I may use it in my hands free equipped vehicles can anyone help me please ?

First, this is the Photoshop (full version) forum - you may be able to get more pertinent and specific help down at the Photoshop Elements forum:
http://forums.adobe.com/community/photoshop_elements
Generally speaking, one edits image files then saves the results on one's hard drive, so the photos don't "go into" Photoshop, but rather they are just files on the disk. However, I'm not sure whether you used a feature of Elements I may not be familiar with. You may be best off asking Elements experts.
-Noel

IPhone 4 power on/off button working intermittently?

Hello everyone! My one and a half year old iphone 4 recently got dropped in the water recently for about a minute. ( I know, stupid stupid me!) I immediately panicked but noticed that nothing seemed to have happened at first glance. However, I immediately switched it off and dried it the best I could (including keeping it in rice). I switched it back on a day later and noticed that everything seems except for the power button and the speakers. Within a few hours, the speakers issue got resolved on its own and it started working alright. However, the power button seems to only work intermittently. For example, if I press it now, it locks the phine after fifteen minutes. Also, sometimes it locks by itself and shows the "slide to power off" slider screen, as if the phone thinks someone has been pressing the button continuously. I'm using assistive touch at the moment and tried to do a restore with iTunes but to no avail.
I was wondering if anyone had any tips to fix the button? Since my phone is out of warranty, how risky would it be to take it to a third party repair store because everything else is working fine and I don't really want a refurbished replacement?
Thanks in advance for any help, guys!

By using AssistiveTouch, you are pretty much doing all that you can, as this is a hardware problem with the button. I am afraid you will have to use it as is, or get a refurbished replacement for $149. If you are due for an upgrade with your carrier, you could actually get an 8GB iPhone 4 for free (if you sign a new 2-year contract), or even a 16GB iPhone 4S for $99.

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I have bought a docking station and my iphone works fine but my ipod mini seems to fit on the connection but only works intermittently. Is it a different connection or is there a problem with the ipod?

I think that is happening is that the microphone is on during this recording. If you play the music through the iPhone speakers, it will record this sound, albeit at very poor quality. If you say anything (or laugh uproariously as I did while watching the app in action, then that, too, get recorded.
I am still looking for the solution we all want, which is to save the audio in reasonable quality.
Anyone out there with some ideas?
Cheers,
Rob

Hyperlinks to XLS, DOC, and PDF files that are included in a .chm file work intermittently.

SUMMARY
Hyperlinks to XLS, DOC, and PDF files that are included in a
.chm file (and the Baggage Files) only work intermittently. The
only solution appears to be deleting the Temporary Internet Files.
PROBLEM
1. I place the XLS, DOC, or PDF file in the Windows
sub-directory that corresponds to the RoboHelp project sub-folder
where the topic in which I’ll place the hyperlink exists.
2. I open the help project in RoboHelp HTML.
3. I right-click on the project’s Baggage Files
sub-folder that corresponds to the Windows sub-directory in which I
placed the XLS, DOC, or PDF file (in step 1).
4. I import the XLS, DOC, or PDF file.
5. I open the topic in which I’m going to place the
hyperlink in the WYSIWYG editor.
6. I “drag and drop” the Baggage File into the
topic (in the WYSIWYG editor) to create a link to it.
7. I save the changes and then generate HTML (.chm) help.
8. I open the .chm file and click the hyperlink. The XLS,
DOC, or PDF file may or may not open.
9. When the hyperlink works correctly, for DOC and XLS files,
a “File Download – Security Warning” dialog box
appears asking, “Do you want to open or save this
file?”. The buttons that are available are
“Open”, “Save”, and “Cancel”.
These buttons work then as one would expect. (When the hyperlink
works correctly for a PDF file, it simply opens the PDF file in a
new window; there’s no prompt to save, open, or cancel.)
10. When a hyperlink does NOT work, for DOC, XLS, and PDF
files, no dialog box or other visual message is displayed. Instead,
the sound that is associated with the “Exclamation”
program event is played (the “Windows XP
Exclamation.wav” file is the WinXP default).
Other Notes:
- The hyperlinks ALWAYS work when I view a topic using the
“View Selected Item” function (Ctrl+W) in the RoboHelp
HTML project.
- Once a hyperlink stops working, it will not start working
again until I delete all the Temporary Internet Files.
- A hyperlink will stop working even if Internet Explorer
(iexplore.exe) is closed the entire time.
WORKAROUND
Through trial and error, I have discovered that if a
hyperlink stops working, I can get it to work again using the
following steps:
1. Leave the .chm file open.
2. Open Internet Explorer.
3. Click Tools>Internet Options….
4. From the “Internet Options” dialog box, select
the “General” tab.
5. Under the “Temporary Internet Files” section,
click the “Delete Files…” button.
6. From the “Delete Files” dialog box, select
“Delete all offline content” and then click
“OK”. The files are deleted and the “Delete
Files” dialog box closes.
7. Click “OK” to close the “Internet
Options” dialog box.
8. Without closing Internet Explorer and without re-starting
the .chm file, all the hyperlinks that didn’t work before
will now work.
GENERAL SYSTEM INFORMATION
- Windows XP Pro, SP2
- Internet Explorer 6.0.2900.2180
- RoboHelp X5, 5.0.2 Build 801
- HTML (.chm) help project files exist on my local machine
- HTML (.chm) help file is run from my local machine
- Project is under RoboSource version control
TEMPORARY INTERNET SETTINGS
- “Check for newer versions of stored pages” is
set to “Automatically”
- “Current location” for the Temporary Internet
files folder is set to “C:\Documents and Settings\My
Username\Local Settings\Temporary Internet Files\”
- “Amount of disk space to use” is set to
“594” MB
“View Files…”
- An XLS or DOC file will be listed here if I click its
hyperlink and then click either “Open” or
“Save” from the “File Download – Security
Warning” dialog box.
- A file will appear here even if I click “Save”
and then click “Cancel” from the subsequent “Save
As” dialog box.
- If I click “Cancel” from the “File
Download – Security Warning” dialog box, the file does
not appear in the Temporary Internet Files folder.
- When a file does appear in the Temporary Internet Files
folder, its Internet Address is displayed similar to the following:
“ms-its:C:\PrimaryProjectFolder\ProjectName.chm::/SubFolderName/FileName.xls”
“View Objects…”
Here’s a list of all the program files that appear:
- “Microsoft Office Template and Media Control”
(Last Accessed 12/13/06) (Version 12,0,6024,0)
- “Shockwave ActiveX Control” (Last Accessed
12/14/06) (Version 10,1,4,20)
- “Shockwave Flash Object” (Last Accessed
12/18/06) (Version 9,0,28,0)
- “Windows Genuine Advantage Validation Tool”
(Last Accessed 12/14/06) (Version 1,5,722,0)
- “WUWebControl Class” (Last Accessed 12/13/06)
(Version 5,8,0,2469)
Today is 12/18/06 so the only program file that is listed as
having been “Last Accessed” today is the
“Shockwave Flash Object”.
REQUEST FOR HELP
I really want to include certain PDF, DOC, and XLS files in
their native format in a .chm file. However, I need a better
solution to my problem than the one I discovered. What I really
want is to avoid the entire problem altogether.
Have anyone seen this before or have any suggestions?

You wont be able to do that. The embedded objects would appear as images only.

USB Ports work Intermittantly on Pavilion Notebook

I have a HP Pavilion dv7-2270us Entertainment Notebook PC that is running Windows 7. The USB ports seem to work intermittantly. There are two regular USB ports on the left hand side and one on the right. I have an iPhone, Adidas miCoach, and wireless mouse that I usually have plugged in, and lately nothing is recognized.
Sometimes I get an error that the USB device is not recognized, sometimes I get nothing at all as though the ports aren't even there.
I have tried taking out the battery, replacing and rebooting. I have also tried uninstalling the USB Root Hub, and then the Root Hub plus controllers. When I did this it seemed like it worked - I plugged my mouse in and it worked! I plugged my iPhone in and now nothing works again.
I have Norton 360 Installed (in case that is an issue), and I also have some old Sony Ericksson software that I've recently uninstalled because someone told me that it wreaked havoc on their machine in terms of their device drivers.
The laptop is just out of warranty (Dec 2010) so this is a relatively new machine. But I love all my gadgets and need to be able to use them all!

Right Click on all devices which are recognized as unknown and Choose Uninstall one by one.
Please ensure you also do this for any and every item under Universal serial bus controllers as well. After this restart your computer and you should be good to go.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

one of those days --- it's the PLACE dialogue box

My home button is working intermittantly. Have Restored setting. still problem. Any ideas?

my home button is working intermittantly. Have Restored setting. still problem. Any ideas?

Did you actually restore the iPad? Or just restore settings?
If you haven't "restored" the iPad...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If a restore doesn't work... > Apple - Support - iPad - Hardware Service

Creative Inspire T900 problem, just 2 front speakers work when connect to a laptop

Hi everybody,
I have just bought a Creative Inspire T7900 system, it's in good quality I think.
But I just got a laptop without 5.1/6.1 or 7/ sound card ( one output only ), therefore i cannot use the 7.1 Audio Cable.
I tried to use a stereo-to-stereo cable to connect my laptop to the input in the wired remote but only the front satellite speakers work. Is that a problem with the Wired Remote ? Or the problem with the system ?
Can I laptop use all the speakers ?
Please help me, thank you very much.

thanhvtd86,
There isn't any problem with the speaker system nor your laptop and it's normal. Stereo consists of only 2 channel and that's why you are experiencing output from only the two front speaker. You won't be able to utilize the full capability of the speaker if you don't have a 7.1 capable soundcard.
Jason

Speakers work but no sound

Speakers work but cannot get any sound output. Running windows 7 on Intel iMac. Speakers sound on booting and graphics in Control panel and on toolbar indicate sound is being recieved but nothing comes out of speakers or headphones.

This is your machine - http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-3.06-24-inch-al uminum-early-2008-penryn-specs.html
It is an iMac from 2008. You can download the .zip file directly to a new folder on the Windows side, unzip it and run setup.exe from this folder.
This is what you need - Boot Camp Support Software 4.0.4033. (From System Requirements).
Post Date: Mar 14, 2013
File Size: 601.76System Requirements
MacBook (13-inch, Late 2006)
MacBook (13-inch, Mid 2007)
MacBook (13-inch, Late 2007)
MacBook (13-inch, Early 2008)
MacBook (13-inch, Late 2008)
MacBook (13-inch, Early 2009 & Mid 2009)
MacBook (13-inch, Late 2009) *
MacBook (13-inch, Mid 2010) *
MacBook Air (13-inch, Early 2008)
MacBook Air (13-inch, Late 2008 & Mid 2009)
MacBook Air (11-inch & 13-inch, Late 2010) *
MacBook Pro (15-inch & 17-inch, Core 2 Duo)
MacBook Pro (15-inch & 17-inch, 2.2 & 2.4GHz)
MacBook Pro (15-inch & 17-inch, Early 2008) *
MacBook Pro (15-inch, Late 2008) *
MacBook Pro (17-inch, Early 2009 & Mid 2009) *
MacBook Pro (15-inch, Early 2009) *
MacBook Pro (13-inch and 15-inch, Mid 2009) *
MacBook Pro (13-inch,15-inch, and 17-inch, Mid 2010)
MacBook Pro (13-in, 15-inch, and 17-inch, Early 2011 & Late 2011)
Mac Pro (Mid 2006)
Mac Pro (Early 2008) *
Mac Pro (Early 2009)
Mac Pro (Early 2007)
Mac Pro (Mid 2010)
Mac Pro (15-inch and 17-inch, 2.2 & 2.4GHz)
Mac mini (Mid 2007)
Mac mini (Early 2009 & Late 2009)
Mac mini (Mid 2010) *
iMac (17-inch, Late 2006)
iMac (20-inch, Late 2006)
iMac (24-inch, Late 2006)
iMac (20-inch & 24-inch, Mid 2007)
iMac (20-inch & 24-inch, Early 2008)
iMac (20-inch, Early 2009 & Mid 2009)
iMac (21.5-inch & 27-inch, Late 2009) *
iMac (27-inch, Late 2009) *
iMac (21.5-inch, Mid 2010) *
iMac (27-inch, Mid 2010)
iMac (21.5-inch, Mid 2011 & Late 2011)
iMac (27-inch, Mid 2011)
all these drivers support Windows 7, 32 bit
* drivers that support Windows 7, 32 and 64 bit

USB ports only working intermittently

I have an MSI Z97 gaming 7 motherboard, the USB ports on the motherboard only work intermittently, MSI support have suggested I upgrade to the latest bios, which I believe is MS7916IMS.172 and they have sent me a link for this, however I want to use the forum flash tool this is what I used to flash from 1.1 to 1.5 and was very easy to do, could someone give me the correct link to this bios that uses the forum flash tool, I have seen this in posts made by Svet and other forum members for other bios
Thank you.
msi gaming 7
Intel i5 4690k
8 gb corsair ram
256 gb crucial ssd
AMD 7870
Windows 8.1

here it is: https://forum-en.msi.com/index.php?topic=184158.msg1323590#msg1323590
Use mode1:

Q to o keys working intermittently

The keys Q,W,E,R,T,Y,U,I and O work intermittently.All other keys are working perfectly. When i connect an external keyboard via bluetooth i have no problems.
Any ideas?

Reset PRAM. http://support.apple.com/kb/PH4405

I can't hear caller/they can hear me/speakers work fine on Vmail and Ipod

I can't hear a caller when I place a call or receive a call.
They can hear me.
Speakerphone does not work either
The speakers work fine for listening to Voicemails and IPod songs.
What gives?

I took it to the Apple Store today.
The guy at the Genius Bar took it apart and reset it...said he had no clue what was wrong and gave me a new phone. Oh well...

Sender HTTP Adapter working intermittently

HI ,
My scenarios is HTTP->XI.>ECC,
Sender HTTP Adapter is working intermittently some times data is not reaching to XI though it sent successfully from Source.
We are unable to find the logs in XI where this data went.
This interface is working fine in PI 7.1 and now in migration to PI 7.3 ( have Two application server dispatcher model) this interface is working intermittently .
Please provide any inputs on this intermittent issue for sender HTTP adapter.
Data sent successfully from source side and no message is received to XI MONI. Please guide me where can I check for the logs and error details

Hi Krishna,
If your PI is dual stack and you are not using the http_aae you can trace the http in the ABAP stack. Go to smicm transaction and set the trace level to 2 or 3.
In Quality system you can talk with your sender client in order to prepare a set of requests in oder to find out if the requests are reaching to PI or not and what exception could be.
hope this helps.
Regards.

EMac G4 700 speakers working intermittently

Similar Messages

Maybe you are looking for