Emac monitor is very dull when I start the emac
Hi All,
For the past month or so, I have been facing this problem.
When ever i start the emac, the monitor is extremely dull and it takes a few minutes before the monitor regains it's original brightness and contrast.
I can't figure out what is wrong and how to resolve this problem.
Regards,
Senthil
http://www.apple.com/support/emac/repairextensionprogram/
eMac Mac OS X (10.3.9)
Similar Messages
-
5800Xm very slow when is starting
Hello folks,
Anybody can help me, suddenly my phone began to be very slow when is starting, take 5 minute to start the main screen.
notice that I take out the microsd card, inmediately run and star the well.
What cain i do?
Solved!
Go to Solution.You can thank me by clicking the green star
If you want to thank someone, just click on the blue star at the bottom of their post -
When clicking a link - a new tab opens. But the new tab which opens looks wired: There are 2 blue bars - the one you get on each session(where the red x is which closes everything) - I don`t know how you call this. This 2nd blue bar is located directly under the "normal" one and has got - on the left hand side- a firefox dropdown menue(when you click it you get: New Tab, Start private browsing, edit, save page as and so on.
I can close the session as always but when i start the next session a view hours or a day later then firefox opens all the tabs from the session before as individual windows - and then it crashes. This happens 2 or 3 times - then i see a window where i am asked to either restore the old session(which doesn`t work - it always crashes again) or start a new session - which works.
This is very annoying. Please tell me what to do.
Thank you
richardIt is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js -
I downloaded the last version of Flash Player this morning (in Europe) but when I start the Install Adobe Player.app it crashes every time (I already unsinstalled the last Flash version and re-installed the new version many times but it doesn't work) and I always get this message (it's a summary because the real one is very very long - if you want the long version to help me with all the " facts ", just ask - thanks in advance " :
Process: Install Adobe Flash Player [1292]
Path: /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
Identifier: com.solidstatenetworks.awkhost
Version: 3.3.6.0 (3.3.6.0)
Code Type: X86 (Native)
Parent Process: launchd [206]
User ID: 501
Date/Time: 2013-02-08 15:28:46.957 +0100
OS Version: Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report: 2909 sec
Crashes Since Last Report: 10
Per-App Interval Since Last Report: 15 sec
Per-App Crashes Since Last Report: 3
Anonymous UUID: 9F1AAA7D-58CF-CECE-AA15-31385DEBF4E2
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
VM Regions Near 0:
--> __PAGEZERO 0000000000000000-0000000000001000 [ 4K] ---/--- SM=NUL /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
__TEXT 0000000000001000-0000000000050000 [ 316K] r-x/rwx SM=COW /Volumes/VOLUME/Install Adobe Flash Player.app/Contents/MacOS/Install Adobe Flash Player
Model: MacBookPro6,1, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.57f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54333531533641465238432D47372020 "I went on the Adobe website and I found this which helped me completely (thank to you Kaolay001) :
17.
Kaolay001
8 feb. 2013 07:20 in reply to Hmalina
http://forums.adobe.com/message-abuse!input.jspa?objectID=5057993&objectType=2
Report
How i solved:
1 Mount the Flash Player installer .dmg file
2 Copy the "Install Adobe Flash Player" file to desktop or any other directory as preferred
3 Open terminal and cd to desktop or the other directory
4 Run the following command on terminal: sudo ./Install\ Adobe\ Flash\ Player.app/Contents/MacOS/Install\ Adobe\ Flash\ Player
5 Insert the password when asked -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
When I start the program I instantly see this message: "Adobe Bridge encountered a problem and is unable to read the cache, please try purging the central cache in cache preferences to correct the situation". I have tried this and it only results in a stalled/locked program. I have tried restarting my machine multiple times and tried reconfiguring how the cache is managed. Do you have anyone who could walk me through each step to correct this problem which just started two days ago. I have owned this program for at least a year now...
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
I get this message when i start the computer :" error : unable to start the bluetooth stack service"
i get this message when i start the computer :" error : unable to start the bluetooth stack service"
If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it. -
My iphone4 reacts very slowly when I use the button.Problem after updating to newest IOS
My Iphone 4 respond very slow when I use the button. The problem started when i updated to new IOS 6.0.1
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english languageA different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well. -
SOA_INFRA application not getting initialized when I start the soa_server
Hi,
I have created a Weblogic Domain, with SOA server and BAM server. After starting the Admin Server, when I start the Managed Server (soa_server). I get the following exception in the console:
<Jan 21, 2011 8:38:09 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initia
ize the application 'soa-infra' due to error java.lang.ClassNotFoundException:
avax.wsdl.WSDLException.
java.lang.ClassNotFoundException: javax.wsdl.WSDLException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: javax.wsdl.WSDLException
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
Though the soa_server is up and running I do not see the SOA tree structure of Farm_<domain_name> from the EM.
Please advice as to what can be done to get the library having WSDLException class or is it someother problem ?Make sure that you have installed SOA 11.1.1.3.0 on Weblogic 10.3.3
Post the version of softwares you have installed, here?
Regards,
Anuj -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.
I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!
-
when i start the browser the Mozilla Firefox' default home page not opens, other website opens nationzoom , i tried all things to change this page to default but it is not changed, following things that i have tried
1 open options then general then change start page to home page and my home page is default
2 i read a help topic on Firefox support site there is an add on which removes toolbar i tried this but start up page not changed yet
please help me about thisHello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Maybe you are looking for
-
ITunes - App Store - There are updates available that ain't available?
First of all, I'm starting to think that the iPhone ***** big time, but that's a whole other story... So, here's my issue: Apparently there are updates to my applications available. So says iTunes and also the App Store app on the iPhone, both of the
-
My Iphone stucked at japanese app store
Two month ago, I changed my app store to Japanese because I was going to stay in Japan for a while. I updated a new version of IOS when I was staying there. Now, I move back and can't change my app store to an original one. It keeps saying that " Thi
-
Hi, need your help again. How to do this: A JTable is inside a form, whenever this form is called out, the first row and first column in table must get the focus, with cursor blinking. Any way to do this?
-
For about two weeks now I have not been getting my new email notifications, The only way that I can retrieve them is to go into the mail app and get them manualy. My question is; Is there anyone else having this same problem? "yahoo is my email provi
-
SSD in a DV5-1140ez in replacement of DVD drive?
Hi there. I have a DV5-1140ez (P8400 with 9600M) and I was wondering if would be possible to replace my DVD player by a SSD. In which case, what is the connection required and how should I make it fit and hold. Any ideas? Thanks! This question was so