Emacs and Xorg

Hi!
I've done a full system upgrade, and xorg and emacs were upgraded to their latest version in the package repository.  When I tried to start emacs afterwards, X crashed.  I've edited my .emacs as the crash was apparently caused by the fact that I use "monotype-courier new" as my default font.  Has anyone encountered a similer crash?   I have no idea why this happens..
Thanks!

I have this crash with the CVS version as well.  I'll look into the xorg.conf file, but I don't believe this has changed. 
I can select the monotype courier-new font in xfontsel by the way, so I guess that already rules out the possibility of a missing font path?
Regards, and thanks for the answer!

Similar Messages

  • Emacs crashes Xorg

    Hello. I have a unique problem that I have been hitherto unable to solve: Emacs crashes Xorg. These crashes don't always happen instantly -- in fact there doesn't appear to be any discernible pattern to them whatsoever.
    About 20% of the time, Xorg (and consequently Emacs) will crash as soon as I enter the start command in a terminal emulator. The remaining 80% of the time, it will crash somewhere between 1 and 5 minutes into an Emacs session. I am running OpenBox and LightDM on top of X, and I don't know if that information is relevant to you or not.
    Here is the output of Xorg log
    [1119863.716]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [1119863.716] X Protocol Version 11, Revision 0
    [1119863.716] Build Operating System: Linux 3.19.2-1-ARCH x86_64
    [1119863.716] Current Operating System: Linux ArtisanBox 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
    [1119863.716] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1441102d-dc98-4815-b6eb-a21f7b3802ad rw quiet
    [1119863.717] Build Date: 14 April 2015 10:34:18AM
    [1119863.717]
    [1119863.717] Current version of pixman: 0.32.6
    [1119863.717] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [1119863.717] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [1119863.717] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 24 18:57:12 2015
    [1119863.717] (==) Using config file: "/etc/X11/xorg.conf"
    [1119863.717] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [1119863.717] (==) No Layout section. Using the first Screen section.
    [1119863.717] (==) No screen section available. Using defaults.
    [1119863.717] (**) |-->Screen "Default Screen Section" (0)
    [1119863.717] (**) | |-->Monitor "<default monitor>"
    [1119863.717] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [1119863.717] (==) Automatically adding devices
    [1119863.717] (==) Automatically enabling devices
    [1119863.717] (==) Automatically adding GPU devices
    [1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [1119863.717] Entry deleted from font path.
    [1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [1119863.717] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [1119863.717] Entry deleted from font path.
    [1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [1119863.717] Entry deleted from font path.
    [1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [1119863.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [1119863.717] Entry deleted from font path.
    [1119863.717] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [1119863.717] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [1119863.717] (==) ModulePath set to "/usr/lib/xorg/modules"
    [1119863.717] (**) Extension "Composite" is enabled
    [1119863.717] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [1119863.717] (II) Loader magic: 0x815d80
    [1119863.717] (II) Module ABI versions:
    [1119863.717] X.Org ANSI C Emulation: 0.4
    [1119863.717] X.Org Video Driver: 19.0
    [1119863.717] X.Org XInput driver : 21.0
    [1119863.717] X.Org Server Extension : 9.0
    [1119863.718] (EE) systemd-logind: failed to get session: PID 21863 does not belong to any known session
    [1119863.719] (II) xfree86: Adding drm device (/dev/dri/card0)
    [1119863.719] (II) xfree86: Adding drm device (/dev/dri/card1)
    [1119863.720] (--) PCI: (0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000c000/256
    [1119863.720] (--) PCI:*(0:2:0:0) 1002:954f:1682:2920 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [1119863.720] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [1119863.720] (II) LoadModule: "glx"
    [1119863.720] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [1119863.722] (II) Module glx: vendor="X.Org Foundation"
    [1119863.722] compiled for 1.17.1, module version = 1.0.0
    [1119863.722] ABI class: X.Org Server Extension, version 9.0
    [1119863.722] (==) AIGLX enabled
    [1119863.722] (==) Matched ati as autoconfigured driver 0
    [1119863.722] (==) Matched ati as autoconfigured driver 1
    [1119863.722] (==) Matched ati as autoconfigured driver 2
    [1119863.722] (==) Matched modesetting as autoconfigured driver 3
    [1119863.722] (==) Matched fbdev as autoconfigured driver 4
    [1119863.722] (==) Matched vesa as autoconfigured driver 5
    [1119863.722] (==) Assigned the driver to the xf86ConfigLayout
    [1119863.722] (II) LoadModule: "ati"
    [1119863.722] (WW) Warning, couldn't open module ati
    [1119863.722] (II) UnloadModule: "ati"
    [1119863.722] (II) Unloading ati
    [1119863.722] (EE) Failed to load module "ati" (module does not exist, 0)
    [1119863.722] (II) LoadModule: "modesetting"
    [1119863.722] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [1119863.722] (II) Module modesetting: vendor="X.Org Foundation"
    [1119863.722] compiled for 1.17.1, module version = 1.17.1
    [1119863.722] Module class: X.Org Video Driver
    [1119863.722] ABI class: X.Org Video Driver, version 19.0
    [1119863.722] (II) LoadModule: "fbdev"
    [1119863.722] (WW) Warning, couldn't open module fbdev
    [1119863.722] (II) UnloadModule: "fbdev"
    [1119863.722] (II) Unloading fbdev
    [1119863.722] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [1119863.722] (II) LoadModule: "vesa"
    [1119863.722] (WW) Warning, couldn't open module vesa
    [1119863.722] (II) UnloadModule: "vesa"
    [1119863.722] (II) Unloading vesa
    [1119863.722] (EE) Failed to load module "vesa" (module does not exist, 0)
    [1119863.723] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [1119863.723] (++) using VT number 1
    [1119863.723] (II) modeset(0): using drv /dev/dri/card1
    [1119863.723] (II) modeset(G0): using drv /dev/dri/card0
    [1119863.723] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [1119863.723] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [1119863.723] (==) modeset(0): RGB weight 888
    [1119863.723] (==) modeset(0): Default visual is TrueColor
    [1119863.723] (II) Loading sub module "glamoregl"
    [1119863.723] (II) LoadModule: "glamoregl"
    [1119863.723] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [1119863.727] (II) Module glamoregl: vendor="X.Org Foundation"
    [1119863.727] compiled for 1.17.1, module version = 1.0.0
    [1119863.727] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119863.727] (II) glamor: OpenGL accelerated X.org driver based.
    [1119863.765] (II) glamor: EGL version 1.4 (DRI2):
    [1119863.767] (II) modeset(0): glamor initialized
    [1119863.767] (II) Loading sub module "dri2"
    [1119863.767] (II) LoadModule: "dri2"
    [1119863.767] (II) Module "dri2" already built-in
    [1119863.788] (II) modeset(0): Output VGA-1 has no monitor section
    [1119863.808] (II) modeset(0): Output DIN-0 has no monitor section
    [1119863.842] (II) modeset(0): Output DVI-0 has no monitor section
    [1119863.861] (II) modeset(0): EDID for output VGA-1
    [1119863.881] (II) modeset(0): EDID for output DIN-0
    [1119863.916] (II) modeset(0): EDID for output DVI-0
    [1119863.916] (II) modeset(0): Manufacturer: GSM Model: 5819 Serial#: 28153
    [1119863.916] (II) modeset(0): Year: 2011 Week: 3
    [1119863.916] (II) modeset(0): EDID Version: 1.3
    [1119863.916] (II) modeset(0): Digital Display Input
    [1119863.916] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [1119863.916] (II) modeset(0): Gamma: 2.20
    [1119863.916] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
    [1119863.916] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [1119863.916] (II) modeset(0): First detailed timing is preferred mode
    [1119863.916] (II) modeset(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [1119863.916] (II) modeset(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [1119863.916] (II) modeset(0): Supported established timings:
    [1119863.916] (II) modeset(0): 720x400@70Hz
    [1119863.916] (II) modeset(0): 640x480@60Hz
    [1119863.916] (II) modeset(0): 640x480@75Hz
    [1119863.916] (II) modeset(0): 800x600@60Hz
    [1119863.916] (II) modeset(0): 800x600@75Hz
    [1119863.916] (II) modeset(0): 1024x768@60Hz
    [1119863.916] (II) modeset(0): 1024x768@75Hz
    [1119863.916] (II) modeset(0): 1280x1024@75Hz
    [1119863.916] (II) modeset(0): Manufacturer's mask: 0
    [1119863.916] (II) modeset(0): Supported standard timings:
    [1119863.916] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [1119863.916] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [1119863.916] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
    [1119863.917] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [1119863.917] (II) modeset(0): Supported detailed timing:
    [1119863.917] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [1119863.917] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [1119863.917] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [1119863.917] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
    [1119863.917] (II) modeset(0): Monitor name: E2241
    [1119863.917] (II) modeset(0): Serial No: 103TPHG0U153
    [1119863.917] (II) modeset(0): EDID (in hex):
    [1119863.917] (II) modeset(0): 00ffffffffffff001e6d1958f96d0000
    [1119863.917] (II) modeset(0): 0315010380301b78ea9535a159579f27
    [1119863.917] (II) modeset(0): 0e5054a54b00714f8180818fb3000101
    [1119863.917] (II) modeset(0): 010101010101023a801871382d40582c
    [1119863.917] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e
    [1119863.917] (II) modeset(0): 530f000a202020202020000000fc0045
    [1119863.917] (II) modeset(0): 323234310a20202020202020000000ff
    [1119863.917] (II) modeset(0): 003130335450484730553135330a00d5
    [1119863.917] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    [1119863.917] (II) modeset(0): Printing probed modes for output DVI-0
    [1119863.917] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [1119863.917] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [1119863.917] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [1119863.917] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [1119863.917] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [1119863.917] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [1119863.917] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [1119863.917] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [1119863.917] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [1119863.917] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [1119863.917] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
    [1119863.917] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [1119863.917] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [1119863.917] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [1119863.917] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [1119863.917] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [1119863.917] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [1119863.917] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [1119863.917] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [1119863.917] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [1119863.917] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [1119863.917] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [1119863.917] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [1119863.917] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [1119863.917] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [1119863.917] (II) modeset(0): Output VGA-1 disconnected
    [1119863.917] (II) modeset(0): Output DIN-0 disconnected
    [1119863.917] (II) modeset(0): Output DVI-0 connected
    [1119863.917] (II) modeset(0): Using exact sizes for initial modes
    [1119863.917] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [1119863.917] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [1119863.917] (==) modeset(0): DPI set to (96, 96)
    [1119863.917] (II) Loading sub module "fb"
    [1119863.917] (II) LoadModule: "fb"
    [1119863.917] (II) Loading /usr/lib/xorg/modules/libfb.so
    [1119863.918] (II) Module fb: vendor="X.Org Foundation"
    [1119863.918] compiled for 1.17.1, module version = 1.0.0
    [1119863.918] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119863.918] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
    [1119863.918] (==) modeset(G0): RGB weight 888
    [1119863.918] (==) modeset(G0): Default visual is TrueColor
    [1119863.918] (II) Loading sub module "glamoregl"
    [1119863.918] (II) LoadModule: "glamoregl"
    [1119863.918] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [1119863.918] (II) Module glamoregl: vendor="X.Org Foundation"
    [1119863.918] compiled for 1.17.1, module version = 1.0.0
    [1119863.918] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119863.918] (II) glamor: OpenGL accelerated X.org driver based.
    [1119863.919] (II) glamor: EGL version 1.4 (DRI2):
    [1119863.920] (II) modeset(G0): glamor initialized
    [1119863.920] (II) Loading sub module "dri2"
    [1119863.920] (II) LoadModule: "dri2"
    [1119863.920] (II) Module "dri2" already built-in
    [1119863.941] (II) modeset(G0): Output VGA-1-0 has no monitor section
    [1119863.944] (II) modeset(G0): Output DVI-1-0 has no monitor section
    [1119863.965] (II) modeset(G0): EDID for output VGA-1-0
    [1119863.967] (II) modeset(G0): EDID for output DVI-1-0
    [1119863.967] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [1119863.967] (==) modeset(G0): DPI set to (96, 96)
    [1119863.967] (II) Loading sub module "fb"
    [1119863.967] (II) LoadModule: "fb"
    [1119863.967] (II) Loading /usr/lib/xorg/modules/libfb.so
    [1119863.967] (II) Module fb: vendor="X.Org Foundation"
    [1119863.967] compiled for 1.17.1, module version = 1.0.0
    [1119863.967] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119863.967] (==) Depth 24 pixmap format is 32 bpp
    [1119864.022] (==) modeset(G0): Backing store enabled
    [1119864.022] (==) modeset(G0): Silken mouse enabled
    [1119864.022] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [1119864.022] (==) modeset(G0): DPMS enabled
    [1119864.022] (II) modeset(G0): [DRI2] Setup complete
    [1119864.022] (II) modeset(G0): [DRI2] DRI driver: r600
    [1119864.022] (II) modeset(G0): [DRI2] VDPAU driver: r600
    [1119864.070] (==) modeset(0): Backing store enabled
    [1119864.070] (==) modeset(0): Silken mouse enabled
    [1119864.070] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [1119864.070] (==) modeset(0): DPMS enabled
    [1119864.070] (II) modeset(0): [DRI2] Setup complete
    [1119864.070] (II) modeset(0): [DRI2] DRI driver: r600
    [1119864.070] (II) modeset(0): [DRI2] VDPAU driver: r600
    [1119864.070] (--) RandR disabled
    [1119864.077] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [1119864.077] (II) AIGLX: enabled GLX_ARB_create_context
    [1119864.077] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [1119864.077] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [1119864.077] (II) AIGLX: enabled GLX_INTEL_swap_event
    [1119864.077] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [1119864.077] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [1119864.077] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [1119864.077] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [1119864.078] (II) AIGLX: Loaded and initialized r600
    [1119864.078] (II) GLX: Initialized DRI2 GL provider for screen 0
    [1119864.081] (II) modeset(G0): Damage tracking initialized
    [1119864.084] (II) modeset(0): Setting screen physical size to 508 x 285
    [1119864.130] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [1119864.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1119864.130] (II) LoadModule: "evdev"
    [1119864.130] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [1119864.131] (II) Module evdev: vendor="X.Org Foundation"
    [1119864.131] compiled for 1.17.1, module version = 2.9.2
    [1119864.131] Module class: X.Org XInput Driver
    [1119864.131] ABI class: X.Org XInput driver, version 21.0
    [1119864.131] (II) Using input driver 'evdev' for 'Power Button'
    [1119864.131] (**) Power Button: always reports core events
    [1119864.131] (**) evdev: Power Button: Device: "/dev/input/event4"
    [1119864.131] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1119864.131] (--) evdev: Power Button: Found keys
    [1119864.131] (II) evdev: Power Button: Configuring as keyboard
    [1119864.131] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
    [1119864.131] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [1119864.131] (**) Option "xkb_rules" "evdev"
    [1119864.131] (**) Option "xkb_model" "pc104"
    [1119864.131] (**) Option "xkb_layout" "us"
    [1119864.164] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [1119864.164] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1119864.164] (II) Using input driver 'evdev' for 'Power Button'
    [1119864.164] (**) Power Button: always reports core events
    [1119864.164] (**) evdev: Power Button: Device: "/dev/input/event3"
    [1119864.165] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1119864.165] (--) evdev: Power Button: Found keys
    [1119864.165] (II) evdev: Power Button: Configuring as keyboard
    [1119864.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
    [1119864.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [1119864.165] (**) Option "xkb_rules" "evdev"
    [1119864.165] (**) Option "xkb_model" "pc104"
    [1119864.165] (**) Option "xkb_layout" "us"
    [1119864.165] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
    [1119864.166] (II) No input driver specified, ignoring this device.
    [1119864.166] (II) This device may have been added with another device file.
    [1119864.166] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
    [1119864.166] (II) No input driver specified, ignoring this device.
    [1119864.166] (II) This device may have been added with another device file.
    [1119864.167] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
    [1119864.167] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [1119864.167] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
    [1119864.167] (**) Dell Dell USB Keyboard: always reports core events
    [1119864.167] (**) evdev: Dell Dell USB Keyboard: Device: "/dev/input/event0"
    [1119864.167] (--) evdev: Dell Dell USB Keyboard: Vendor 0x413c Product 0x2105
    [1119864.167] (--) evdev: Dell Dell USB Keyboard: Found keys
    [1119864.167] (II) evdev: Dell Dell USB Keyboard: Configuring as keyboard
    [1119864.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.1/1-6.1:1.0/0003:413C:2105.0001/input/input2/event0"
    [1119864.167] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 8)
    [1119864.167] (**) Option "xkb_rules" "evdev"
    [1119864.167] (**) Option "xkb_model" "pc104"
    [1119864.167] (**) Option "xkb_layout" "us"
    [1119864.167] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/event1)
    [1119864.167] (**) PixArt DynexWired USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [1119864.167] (II) Using input driver 'evdev' for 'PixArt DynexWired USB Optical Mouse'
    [1119864.167] (**) PixArt DynexWired USB Optical Mouse: always reports core events
    [1119864.167] (**) evdev: PixArt DynexWired USB Optical Mouse: Device: "/dev/input/event1"
    [1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Vendor 0x19ff Product 0x238
    [1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found 3 mouse buttons
    [1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found scroll wheel(s)
    [1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found relative axes
    [1119864.221] (--) evdev: PixArt DynexWired USB Optical Mouse: Found x and y relative axes
    [1119864.221] (II) evdev: PixArt DynexWired USB Optical Mouse: Configuring as mouse
    [1119864.221] (II) evdev: PixArt DynexWired USB Optical Mouse: Adding scrollwheel support
    [1119864.221] (**) evdev: PixArt DynexWired USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [1119864.221] (**) evdev: PixArt DynexWired USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [1119864.221] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.2/1-6.2:1.0/0003:19FF:0238.0002/input/input3/event1"
    [1119864.221] (II) XINPUT: Adding extended input device "PixArt DynexWired USB Optical Mouse" (type: MOUSE, id 9)
    [1119864.222] (II) evdev: PixArt DynexWired USB Optical Mouse: initialized for relative axes.
    [1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) keeping acceleration scheme 1
    [1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration profile 0
    [1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration factor: 2.000
    [1119864.222] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration threshold: 4
    [1119864.223] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/mouse0)
    [1119864.223] (II) No input driver specified, ignoring this device.
    [1119864.223] (II) This device may have been added with another device file.
    [1119864.224] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
    [1119864.224] (II) No input driver specified, ignoring this device.
    [1119864.224] (II) This device may have been added with another device file.
    [1119864.224] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
    [1119864.224] (II) No input driver specified, ignoring this device.
    [1119864.224] (II) This device may have been added with another device file.
    [1119864.225] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
    [1119864.225] (II) No input driver specified, ignoring this device.
    [1119864.225] (II) This device may have been added with another device file.
    [1119864.225] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
    [1119864.225] (II) No input driver specified, ignoring this device.
    [1119864.225] (II) This device may have been added with another device file.
    [1119864.226] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
    [1119864.226] (II) No input driver specified, ignoring this device.
    [1119864.226] (II) This device may have been added with another device file.
    [1119864.226] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
    [1119864.226] (II) No input driver specified, ignoring this device.
    [1119864.226] (II) This device may have been added with another device file.
    [1119864.227] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
    [1119864.227] (II) No input driver specified, ignoring this device.
    [1119864.227] (II) This device may have been added with another device file.
    [1119864.228] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
    [1119864.228] (II) No input driver specified, ignoring this device.
    [1119864.228] (II) This device may have been added with another device file.
    [1119864.228] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [1119864.228] (II) No input driver specified, ignoring this device.
    [1119864.228] (II) This device may have been added with another device file.
    And here's the output of Xorg.log.old:
    [1119721.111]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [1119721.111] X Protocol Version 11, Revision 0
    [1119721.111] Build Operating System: Linux 3.19.2-1-ARCH x86_64
    [1119721.111] Current Operating System: Linux ArtisanBox 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015 x86_64
    [1119721.111] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1441102d-dc98-4815-b6eb-a21f7b3802ad rw quiet
    [1119721.111] Build Date: 14 April 2015 10:34:18AM
    [1119721.111]
    [1119721.111] Current version of pixman: 0.32.6
    [1119721.111] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [1119721.111] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [1119721.111] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 24 18:54:50 2015
    [1119721.168] (==) Using config file: "/etc/X11/xorg.conf"
    [1119721.168] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [1119721.169] (==) No Layout section. Using the first Screen section.
    [1119721.169] (==) No screen section available. Using defaults.
    [1119721.169] (**) |-->Screen "Default Screen Section" (0)
    [1119721.169] (**) | |-->Monitor "<default monitor>"
    [1119721.169] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [1119721.169] (==) Automatically adding devices
    [1119721.169] (==) Automatically enabling devices
    [1119721.169] (==) Automatically adding GPU devices
    [1119721.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
    [1119721.169] Entry deleted from font path.
    [1119721.169] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
    [1119721.169] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [1119721.169] Entry deleted from font path.
    [1119721.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [1119721.169] Entry deleted from font path.
    [1119721.169] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [1119721.170] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [1119721.170] Entry deleted from font path.
    [1119721.170] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [1119721.170] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [1119721.170] (==) ModulePath set to "/usr/lib/xorg/modules"
    [1119721.170] (**) Extension "Composite" is enabled
    [1119721.170] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [1119721.170] (II) Loader magic: 0x815d80
    [1119721.170] (II) Module ABI versions:
    [1119721.170] X.Org ANSI C Emulation: 0.4
    [1119721.170] X.Org Video Driver: 19.0
    [1119721.170] X.Org XInput driver : 21.0
    [1119721.170] X.Org Server Extension : 9.0
    [1119721.182] (EE) systemd-logind: failed to get session: PID 21370 does not belong to any known session
    [1119721.183] (II) xfree86: Adding drm device (/dev/dri/card0)
    [1119721.183] (II) xfree86: Adding drm device (/dev/dri/card1)
    [1119721.186] (--) PCI: (0:1:5:0) 1002:9616:1043:8388 rev 0, Mem @ 0xc0000000/268435456, 0xfe9f0000/65536, 0xfe800000/1048576, I/O @ 0x0000c000/256
    [1119721.186] (--) PCI:*(0:2:0:0) 1002:954f:1682:2920 rev 0, Mem @ 0xd0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
    [1119721.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [1119721.187] (II) LoadModule: "glx"
    [1119721.363] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [1119721.366] (II) Module glx: vendor="X.Org Foundation"
    [1119721.366] compiled for 1.17.1, module version = 1.0.0
    [1119721.366] ABI class: X.Org Server Extension, version 9.0
    [1119721.366] (==) AIGLX enabled
    [1119721.366] (==) Matched ati as autoconfigured driver 0
    [1119721.366] (==) Matched ati as autoconfigured driver 1
    [1119721.366] (==) Matched ati as autoconfigured driver 2
    [1119721.366] (==) Matched modesetting as autoconfigured driver 3
    [1119721.366] (==) Matched fbdev as autoconfigured driver 4
    [1119721.367] (==) Matched vesa as autoconfigured driver 5
    [1119721.367] (==) Assigned the driver to the xf86ConfigLayout
    [1119721.367] (II) LoadModule: "ati"
    [1119721.423] (WW) Warning, couldn't open module ati
    [1119721.423] (II) UnloadModule: "ati"
    [1119721.423] (II) Unloading ati
    [1119721.423] (EE) Failed to load module "ati" (module does not exist, 0)
    [1119721.423] (II) LoadModule: "modesetting"
    [1119721.423] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [1119721.423] (II) Module modesetting: vendor="X.Org Foundation"
    [1119721.423] compiled for 1.17.1, module version = 1.17.1
    [1119721.423] Module class: X.Org Video Driver
    [1119721.423] ABI class: X.Org Video Driver, version 19.0
    [1119721.423] (II) LoadModule: "fbdev"
    [1119721.424] (WW) Warning, couldn't open module fbdev
    [1119721.424] (II) UnloadModule: "fbdev"
    [1119721.424] (II) Unloading fbdev
    [1119721.424] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [1119721.424] (II) LoadModule: "vesa"
    [1119721.424] (WW) Warning, couldn't open module vesa
    [1119721.424] (II) UnloadModule: "vesa"
    [1119721.424] (II) Unloading vesa
    [1119721.424] (EE) Failed to load module "vesa" (module does not exist, 0)
    [1119721.424] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [1119721.424] (++) using VT number 1
    [1119721.425] (II) modeset(0): using drv /dev/dri/card1
    [1119721.425] (II) modeset(G0): using drv /dev/dri/card0
    [1119721.425] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [1119721.425] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [1119721.425] (==) modeset(0): RGB weight 888
    [1119721.425] (==) modeset(0): Default visual is TrueColor
    [1119721.425] (II) Loading sub module "glamoregl"
    [1119721.425] (II) LoadModule: "glamoregl"
    [1119721.425] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [1119721.436] (II) Module glamoregl: vendor="X.Org Foundation"
    [1119721.436] compiled for 1.17.1, module version = 1.0.0
    [1119721.436] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119721.436] (II) glamor: OpenGL accelerated X.org driver based.
    [1119721.472] (II) glamor: EGL version 1.4 (DRI2):
    [1119721.473] (II) modeset(0): glamor initialized
    [1119721.473] (II) Loading sub module "dri2"
    [1119721.473] (II) LoadModule: "dri2"
    [1119721.473] (II) Module "dri2" already built-in
    [1119721.495] (II) modeset(0): Output VGA-1 has no monitor section
    [1119721.515] (II) modeset(0): Output DIN-0 has no monitor section
    [1119721.549] (II) modeset(0): Output DVI-0 has no monitor section
    [1119721.568] (II) modeset(0): EDID for output VGA-1
    [1119721.588] (II) modeset(0): EDID for output DIN-0
    [1119721.623] (II) modeset(0): EDID for output DVI-0
    [1119721.623] (II) modeset(0): Manufacturer: GSM Model: 5819 Serial#: 28153
    [1119721.623] (II) modeset(0): Year: 2011 Week: 3
    [1119721.623] (II) modeset(0): EDID Version: 1.3
    [1119721.623] (II) modeset(0): Digital Display Input
    [1119721.623] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
    [1119721.623] (II) modeset(0): Gamma: 2.20
    [1119721.623] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
    [1119721.623] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [1119721.623] (II) modeset(0): First detailed timing is preferred mode
    [1119721.623] (II) modeset(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
    [1119721.623] (II) modeset(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
    [1119721.623] (II) modeset(0): Supported established timings:
    [1119721.623] (II) modeset(0): 720x400@70Hz
    [1119721.623] (II) modeset(0): 640x480@60Hz
    [1119721.623] (II) modeset(0): 640x480@75Hz
    [1119721.623] (II) modeset(0): 800x600@60Hz
    [1119721.623] (II) modeset(0): 800x600@75Hz
    [1119721.623] (II) modeset(0): 1024x768@60Hz
    [1119721.623] (II) modeset(0): 1024x768@75Hz
    [1119721.623] (II) modeset(0): 1280x1024@75Hz
    [1119721.623] (II) modeset(0): Manufacturer's mask: 0
    [1119721.623] (II) modeset(0): Supported standard timings:
    [1119721.623] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [1119721.623] (II) modeset(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [1119721.623] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
    [1119721.623] (II) modeset(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [1119721.623] (II) modeset(0): Supported detailed timing:
    [1119721.623] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
    [1119721.623] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [1119721.623] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [1119721.623] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 155 MHz
    [1119721.623] (II) modeset(0): Monitor name: E2241
    [1119721.623] (II) modeset(0): Serial No: 103TPHG0U153
    [1119721.623] (II) modeset(0): EDID (in hex):
    [1119721.623] (II) modeset(0): 00ffffffffffff001e6d1958f96d0000
    [1119721.623] (II) modeset(0): 0315010380301b78ea9535a159579f27
    [1119721.623] (II) modeset(0): 0e5054a54b00714f8180818fb3000101
    [1119721.623] (II) modeset(0): 010101010101023a801871382d40582c
    [1119721.623] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e
    [1119721.623] (II) modeset(0): 530f000a202020202020000000fc0045
    [1119721.623] (II) modeset(0): 323234310a20202020202020000000ff
    [1119721.623] (II) modeset(0): 003130335450484730553135330a00d5
    [1119721.624] (II) modeset(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
    [1119721.624] (II) modeset(0): Printing probed modes for output DVI-0
    [1119721.624] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [1119721.624] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [1119721.624] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [1119721.624] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [1119721.624] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [1119721.624] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [1119721.624] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [1119721.624] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [1119721.624] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [1119721.624] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [1119721.624] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz d)
    [1119721.624] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [1119721.624] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [1119721.624] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [1119721.624] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [1119721.624] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [1119721.624] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [1119721.624] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [1119721.624] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [1119721.624] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [1119721.624] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [1119721.624] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [1119721.624] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [1119721.624] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [1119721.624] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [1119721.624] (II) modeset(0): Output VGA-1 disconnected
    [1119721.624] (II) modeset(0): Output DIN-0 disconnected
    [1119721.624] (II) modeset(0): Output DVI-0 connected
    [1119721.624] (II) modeset(0): Using exact sizes for initial modes
    [1119721.624] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [1119721.624] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [1119721.624] (==) modeset(0): DPI set to (96, 96)
    [1119721.624] (II) Loading sub module "fb"
    [1119721.624] (II) LoadModule: "fb"
    [1119721.624] (II) Loading /usr/lib/xorg/modules/libfb.so
    [1119721.624] (II) Module fb: vendor="X.Org Foundation"
    [1119721.624] compiled for 1.17.1, module version = 1.0.0
    [1119721.624] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119721.625] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
    [1119721.625] (==) modeset(G0): RGB weight 888
    [1119721.625] (==) modeset(G0): Default visual is TrueColor
    [1119721.625] (II) Loading sub module "glamoregl"
    [1119721.625] (II) LoadModule: "glamoregl"
    [1119721.625] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [1119721.625] (II) Module glamoregl: vendor="X.Org Foundation"
    [1119721.625] compiled for 1.17.1, module version = 1.0.0
    [1119721.625] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119721.625] (II) glamor: OpenGL accelerated X.org driver based.
    [1119721.626] (II) glamor: EGL version 1.4 (DRI2):
    [1119721.627] (II) modeset(G0): glamor initialized
    [1119721.627] (II) Loading sub module "dri2"
    [1119721.627] (II) LoadModule: "dri2"
    [1119721.627] (II) Module "dri2" already built-in
    [1119721.648] (II) modeset(G0): Output VGA-1-0 has no monitor section
    [1119721.650] (II) modeset(G0): Output DVI-1-0 has no monitor section
    [1119721.671] (II) modeset(G0): EDID for output VGA-1-0
    [1119721.673] (II) modeset(G0): EDID for output DVI-1-0
    [1119721.674] (II) modeset(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [1119721.674] (==) modeset(G0): DPI set to (96, 96)
    [1119721.674] (II) Loading sub module "fb"
    [1119721.674] (II) LoadModule: "fb"
    [1119721.674] (II) Loading /usr/lib/xorg/modules/libfb.so
    [1119721.674] (II) Module fb: vendor="X.Org Foundation"
    [1119721.674] compiled for 1.17.1, module version = 1.0.0
    [1119721.674] ABI class: X.Org ANSI C Emulation, version 0.4
    [1119721.674] (==) Depth 24 pixmap format is 32 bpp
    [1119721.730] (==) modeset(G0): Backing store enabled
    [1119721.730] (==) modeset(G0): Silken mouse enabled
    [1119721.730] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [1119721.730] (==) modeset(G0): DPMS enabled
    [1119721.730] (II) modeset(G0): [DRI2] Setup complete
    [1119721.730] (II) modeset(G0): [DRI2] DRI driver: r600
    [1119721.730] (II) modeset(G0): [DRI2] VDPAU driver: r600
    [1119721.777] (==) modeset(0): Backing store enabled
    [1119721.777] (==) modeset(0): Silken mouse enabled
    [1119721.777] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [1119721.778] (==) modeset(0): DPMS enabled
    [1119721.778] (II) modeset(0): [DRI2] Setup complete
    [1119721.778] (II) modeset(0): [DRI2] DRI driver: r600
    [1119721.778] (II) modeset(0): [DRI2] VDPAU driver: r600
    [1119721.778] (--) RandR disabled
    [1119721.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [1119721.785] (II) AIGLX: enabled GLX_ARB_create_context
    [1119721.785] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [1119721.785] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [1119721.785] (II) AIGLX: enabled GLX_INTEL_swap_event
    [1119721.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [1119721.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [1119721.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [1119721.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [1119721.785] (II) AIGLX: Loaded and initialized r600
    [1119721.785] (II) GLX: Initialized DRI2 GL provider for screen 0
    [1119721.789] (II) modeset(G0): Damage tracking initialized
    [1119721.792] (II) modeset(0): Setting screen physical size to 508 x 285
    [1119721.842] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [1119721.843] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1119721.843] (II) LoadModule: "evdev"
    [1119721.843] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [1119721.843] (II) Module evdev: vendor="X.Org Foundation"
    [1119721.843] compiled for 1.17.1, module version = 2.9.2
    [1119721.843] Module class: X.Org XInput Driver
    [1119721.843] ABI class: X.Org XInput driver, version 21.0
    [1119721.843] (II) Using input driver 'evdev' for 'Power Button'
    [1119721.843] (**) Power Button: always reports core events
    [1119721.843] (**) evdev: Power Button: Device: "/dev/input/event4"
    [1119721.843] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1119721.843] (--) evdev: Power Button: Found keys
    [1119721.843] (II) evdev: Power Button: Configuring as keyboard
    [1119721.843] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event4"
    [1119721.843] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [1119721.843] (**) Option "xkb_rules" "evdev"
    [1119721.844] (**) Option "xkb_model" "pc104"
    [1119721.844] (**) Option "xkb_layout" "us"
    [1119721.872] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [1119721.872] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [1119721.872] (II) Using input driver 'evdev' for 'Power Button'
    [1119721.872] (**) Power Button: always reports core events
    [1119721.873] (**) evdev: Power Button: Device: "/dev/input/event3"
    [1119721.873] (--) evdev: Power Button: Vendor 0 Product 0x1
    [1119721.873] (--) evdev: Power Button: Found keys
    [1119721.873] (II) evdev: Power Button: Configuring as keyboard
    [1119721.873] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5/event3"
    [1119721.873] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [1119721.873] (**) Option "xkb_rules" "evdev"
    [1119721.873] (**) Option "xkb_model" "pc104"
    [1119721.873] (**) Option "xkb_layout" "us"
    [1119721.874] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
    [1119721.875] (II) No input driver specified, ignoring this device.
    [1119721.875] (II) This device may have been added with another device file.
    [1119721.876] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
    [1119721.876] (II) No input driver specified, ignoring this device.
    [1119721.876] (II) This device may have been added with another device file.
    [1119721.876] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event0)
    [1119721.877] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall"
    [1119721.877] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard'
    [1119721.877] (**) Dell Dell USB Keyboard: always reports core events
    [1119721.877] (**) evdev: Dell Dell USB Keyboard: Device: "/dev/input/event0"
    [1119721.877] (--) evdev: Dell Dell USB Keyboard: Vendor 0x413c Product 0x2105
    [1119721.877] (--) evdev: Dell Dell USB Keyboard: Found keys
    [1119721.877] (II) evdev: Dell Dell USB Keyboard: Configuring as keyboard
    [1119721.877] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.1/1-6.1:1.0/0003:413C:2105.0001/input/input2/event0"
    [1119721.877] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD, id 8)
    [1119721.877] (**) Option "xkb_rules" "evdev"
    [1119721.877] (**) Option "xkb_model" "pc104"
    [1119721.877] (**) Option "xkb_layout" "us"
    [1119721.878] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/event1)
    [1119721.878] (**) PixArt DynexWired USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [1119721.878] (II) Using input driver 'evdev' for 'PixArt DynexWired USB Optical Mouse'
    [1119721.878] (**) PixArt DynexWired USB Optical Mouse: always reports core events
    [1119721.878] (**) evdev: PixArt DynexWired USB Optical Mouse: Device: "/dev/input/event1"
    [1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Vendor 0x19ff Product 0x238
    [1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found 3 mouse buttons
    [1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found scroll wheel(s)
    [1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found relative axes
    [1119721.931] (--) evdev: PixArt DynexWired USB Optical Mouse: Found x and y relative axes
    [1119721.931] (II) evdev: PixArt DynexWired USB Optical Mouse: Configuring as mouse
    [1119721.931] (II) evdev: PixArt DynexWired USB Optical Mouse: Adding scrollwheel support
    [1119721.931] (**) evdev: PixArt DynexWired USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [1119721.931] (**) evdev: PixArt DynexWired USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [1119721.931] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6.2/1-6.2:1.0/0003:19FF:0238.0002/input/input3/event1"
    [1119721.931] (II) XINPUT: Adding extended input device "PixArt DynexWired USB Optical Mouse" (type: MOUSE, id 9)
    [1119721.932] (II) evdev: PixArt DynexWired USB Optical Mouse: initialized for relative axes.
    [1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) keeping acceleration scheme 1
    [1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration profile 0
    [1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration factor: 2.000
    [1119721.932] (**) PixArt DynexWired USB Optical Mouse: (accel) acceleration threshold: 4
    [1119721.933] (II) config/udev: Adding input device PixArt DynexWired USB Optical Mouse (/dev/input/mouse0)
    [1119721.933] (II) No input driver specified, ignoring this device.
    [1119721.933] (II) This device may have been added with another device file.
    [1119721.934] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event7)
    [1119721.934] (II) No input driver specified, ignoring this device.
    [1119721.934] (II) This device may have been added with another device file.
    [1119721.934] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event8)
    [1119721.934] (II) No input driver specified, ignoring this device.
    [1119721.934] (II) This device may have been added with another device file.
    [1119721.935] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
    [1119721.935] (II) No input driver specified, ignoring this device.
    [1119721.935] (II) This device may have been added with another device file.
    [1119721.935] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
    [1119721.935] (II) No input driver specified, ignoring this device.
    [1119721.935] (II) This device may have been added with another device file.
    [1119721.936] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
    [1119721.936] (II) No input driver specified, ignoring this device.
    [1119721.936] (II) This device may have been added with another device file.
    [1119721.937] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
    [1119721.937] (II) No input driver specified, ignoring this device.
    [1119721.937] (II) This device may have been added with another device file.
    [1119721.937] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
    [1119721.937] (II) No input driver specified, ignoring this device.
    [1119721.937] (II) This device may have been added with another device file.
    [1119721.938] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
    [1119721.938] (II) No input driver specified, ignoring this device.
    [1119721.938] (II) This device may have been added with another device file.
    [1119721.938] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [1119721.938] (II) No input driver specified, ignoring this device.
    [1119721.938] (II) This device may have been added with another device file.
    [1119863.413] (EE)
    [1119863.414] (EE) Backtrace:
    [1119863.414] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x594a29]
    [1119863.415] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fe8e391b53f]
    [1119863.415] (EE) 2: /usr/lib/xorg/modules/libfb.so (fbBltOne+0x508) [0x7fe8d8a75968]
    [1119863.416] (EE) 3: /usr/lib/xorg/modules/libfb.so (fbPutXYImage+0x23f) [0x7fe8d8a7983f]
    [1119863.416] (EE) 4: /usr/lib/xorg/modules/libfb.so (fbPutImage+0xf2) [0x7fe8d8a79b52]
    [1119863.417] (EE) 5: /usr/lib/xorg/modules/libglamoregl.so (glamor_glyphs_nf+0x6fd) [0x7fe8de3f435d]
    [1119863.417] (EE) 6: /usr/lib/xorg-server/Xorg (DamageRegionAppend+0x34c3) [0x51f863]
    [1119863.417] (EE) 7: /usr/lib/xorg-server/Xorg (SendGraphicsExpose+0xead) [0x43636d]
    [1119863.417] (EE) 8: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x2f7) [0x438a97]
    [1119863.418] (EE) 9: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x41b) [0x43cbcb]
    [1119863.419] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fe8e3908800]
    [1119863.419] (EE) 11: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
    [1119863.420] (EE) 12: ? (?+0x29) [0x29]
    [1119863.420] (EE)
    [1119863.420] (EE) Segmentation fault at address 0x0
    [1119863.420] (EE)
    Fatal server error:
    [1119863.420] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [1119863.420] (EE)
    [1119863.420] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [1119863.420] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [1119863.420] (EE)
    [1119863.421] (II) AIGLX: Suspending AIGLX clients for VT switch
    [1119863.427] (EE) Server terminated with error (1). Closing log file.
    I'd appreciate any help I can get on this matter as Emacs is a vital program for me (I use it as a Lisp IDE)
    Last edited by Slothel (2015-04-25 07:30:16)

    Anyone available to help? The related thread posted offers a work-around solution which is to blacklist radeon, but since I have an AMD graphics card and am using the xf86-video-ati driver, wouldn't this completely break Xorg? I can't use the catalyst driver either, as support for my video card has been discontinued.
    Still a pressing issue for me, and I wouldn't bother you all here if I could find the solution online, but I've been unable to do so. Most similiar issues that I have unearthed have not been solved. If it's any help, I've also noticed one program that crashes Xorg in the same random way that Emacs does, which is LibreOffice. I'm going to try logging in as root to see if that helps the issue but I suspect that it won't. Again, any help would be appreciated, just let me know if I can provide any other information.

  • I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:  Cannot complete i Tunes Store request. A required iTunes com

    I am using a 2003 eMac and am running on Mac OSX  vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
    Cannot complete  iTunes Store request. A required iTunes component is not installed (-42404)
    Please help.

    Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore.  I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere?  Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?

  • Emac and external hard drive

    I have an emac and an Acomdata external hard drivve, that has bee working for the past year, no problems, but now the emac won't read the hard drive. I went into to disk utilities and the hard drive is there it's just not mounted, any ideas on how to remount it?
    Chris

    I had a similar problem, with my SmartDisk 80, have you tried journaling the drive; with the Disc Utility.
    Google Search: journaling hard drive os/x
    I have an emac and an Acomdata external hard drivve,
    that has bee working for the past year, no problems,
    but now the emac won't read the hard drive. I went
    into to disk utilities and the hard drive is there
    it's just not mounted, any ideas on how to remount
    it?
    Chris
    eMac G4 ●1 Ghz ●1 Gb Ram ●Barracuda ST360015A 7200 60Gb Hard Drive Mac OS X (10.3.9) ●SmartDisk 7200 80Gb HD

  • 2003 eMac and 23inches new Apple display compatible?

    I just got a new display (23in Apple) and I would like to plug it in my eMac
    which only seems to have a VGA oulet,
    Does anyone know of an adaptor that could do the trick?
    Couldn't see any on the Mac online store.
    Thanks a million for any suggestion.
    Francis

    There are VGA to DVI converters, but they run about $300.00 US (you can find one such here). And your eMac doesn't support extended desktop, only mirroring, so unless you install a firmware hack (which you use strictly at your own risk), you would get the same picture at the same resolution as on your eMac's screen. Even with the hack, I'm not sure if the eMac would support the 23" LCD's resolution.
    So it's up to you whether or not it's worth it. You could probably sell your eMac and combine that with the cost of the converter and buy a new Mac mini which would support that monitor directly.

  • Are the eMac and the G4 Mac Mini similar enough to...

    use the eMac's tiger upgrade to upgrade my mini to Tiger? I know the other versions of tiger upgrades are specific to the hardware, i.e. powerbook, ibook, imac, ect. But seems to me eMac and the G4 mini are very similar. Possible?
    thanks
    ~bill

    " Are the eMac and the G4 Mac Mini similar enough to use the eMac's tiger upgrade to upgrade my mini to Tiger? "
    No.
    "I know the other versions of tiger upgrades are specific to the hardware"
    And so are the eMac's upgrade discs.

  • Window Maker and xorg 7.0

    Can you run Window Maker with new xorg?
    Each time I try to run it I see just window with information that Window Maker segfaulted.
    I deleted GNUstep in my home, then called wmaker.conf, but that didn't help.
    Yesterday I updated Window Maker, because new package appeared, but that also didn't help.
    Any ideas?

    yup, wmaker and xorg both from testing work together

  • Networking eMac and MacBook

    Hi,
    I have a eMac, MacBook, HP Printer *** Scanner *** Photocopier and a External Hard Drive and want to set up a network with Airport Extreme. The purpose being to be able to access my eMac HD from my MacBook and vice versa. Similarly I want to use the Pinter *** Scanner for both my eMac and MacBook and also use the external HDD for both my eMac and MacBook. I also am using wi-fi to connect to the net.
    1. Is it possible to create a network?
    2. If possible, how difficult is it?
    3. What are the other software and hardware that is required to create this network?
    Thanks and Regards,
    Senthil

    1. Is it possible to create a network?
    The AirPort Extreme base station (AEBS) is a router so using an AEBS creates a network.
    The USB port on the AEBS does NOT support scanning. The USB port supports printing and hard drives ONLY.
    3. What are the other software and hardware that is required to create this network?
    Connect a router like the AEBS. That is all you need.

  • I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features l

    I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features like? I need to use mirror feature and high quality printing and it will not work.

    jdanek
    It is an eMac. I have a corrupted font book. How can I fix/re-install/or download a new font book app? Most fonts that were in it work, some do not, but I cannot open it nor can I install fonts into it.  This happened after the eMac OS was upgraded from 10.3.9 to 10.4.11 and AI was upgraded to CS2
    Kind regards,
    Steve Mosher
    Village Graphics LLC
    438 Troy Loop
    The Villages,  FL  32162
    352-409-6853
    [email protected]

  • Approving applications for emacs and intelimacs through WGM in Leopard

    We are in the process of approving applications in Workgroup Manager with Leopard 10.5.2 across the board on emacs and intelimacs. We are having a problem with approving applications to work on both types of computers. For example, if we approve Firefox in Workgroup Manager, on an intelimac the applications as a user will not work on the emacs. On the other hand, if we approved the application on an emac, it will not work as a user on the intelimac. We have had success on most of the applications but not all. What are we missing? Thanks.

    Hey People,
    Just in case anyone is having the kind of problem I was facing a few days ago, the solution is that the client machines must be Mac os x 10.6.4 and above.  After upgrading the client machines to 10.6.4, I could apply the policies, specify the kind of applications I wanted users and computers to run using WGM.
    I'm not saying this is an expert solution, but it sure did work for me. 
    Cheers.

  • Emacs AND emacs-nox

    I'd like to use on the same machine both emacs and emacs-nox. But they are mutually exclusive. A proximate cause is that they both give
    the same name, 'emacs', to the resulting executable. I presume there are no fundamental conflicts between the X and the no-X versions
    of Emacs, and I'd be perfectly happy to run emacs-nox under a different name. How can I get it my way?
    The reason I want emacs-nox is that I need a just-in-time, disposable, mini-emacs, to be evoked for a brief moment in, say, the 'root' permission terminal that I keep constantly open to run a root-authority commands or touch up a system file. I used to use zile for that, but it is not 100% compatible with emacs, lacks many of the most common commands, and doesn't handle well Ctrl, Alt, Bcksp, and friends.
    When looking for a small-footprint version of emacs for the Raspberry Pi, I realized that emacs-nox has a much smaller footprint not only than emacs, but also than emacs -nw, and in fact is not much bigger than zile itself. So, why use a crippled app if one can use the real thing at very
    little extra cost?
    What do you think? Thanks

    rugantino wrote:The reason I want emacs-nox is that I need a just-in-time, disposable, mini-emacs, to be evoked for a brief moment in, say, the 'root' permission terminal that I keep constantly open to run a root-authority commands or touch up a system file. I used to use zile for that, but it is not 100% compatible with emacs, lacks many of the most common commands, and doesn't handle well Ctrl, Alt, Bcksp, and friends.
    Use TRAMP to edit files via sudo within Emacs. No need to start up a new instance.
    Alternatively, use ABS to recompile it and add the --program-{prefix,suffix} option to change the name of the binary to emacs-nox or whatever.
    Last edited by jakobcreutzfeldt (2013-06-01 10:20:04)

  • EMac and Sony MiniDV

    Hi there,
    Can anyone tell me why my eMac won't find the firewire connected (either port) Sony MiniDV Handycam?
    I connect it all as described (MiniDV set to playback - connected through firewire cable to eMac) and nothing...
    The screen on the Handycam blinks every 3 seconds and shows the DV in signal (I actually want DV out) - but nothing else.
    It all works fine if I connect it to my IBM Notebook via another cable. Am I missing a setting? Or could my cable / firewire ports be cactus?
    Cheers

    Do you have any other Firewire devices? To confirm the impression I got from your post, you're attempting to connect directly to the eMac, and not through a Firewire hub, right?
    With nothing attached to the Firewire ports, open System Profiler (in Applications/ Utilities) and check that the Firewire bus itself shows up. If it doesn't, reset the eMac's Firewire bus triple fuses (they can be tripped and latched by momentary power glitches) by removing all peripherals other than the Apple USB keyboard and mouse, then removing the power cord from the side of the eMac (to remove the trickle current drawn by modern electronics even when nominally off) and waiting 15+ minutes. Then reattach the power cord only and start up the Mac. Check System Profiler again and confirm that the Firewire bus is recognized. Reattach peripherals (the MiniDV camera) one at a time, checking System Profiler after each to confirm the addition is recognized.
    Let's not overlook the too-obvious either; check the Finder's preferences and make sure the "show these items on the desktop" boxes are checked.

  • Older Emac and Final Cut Express 3.5

    I have a lab full of 8 older eMacs (768 MB of RAM, running 10.4.2, 700mHz, 32 MB of VRAM with a GeForce 2 MX graphics card) and want to update to FCE 3.5. Does anyone know of potential problems that I might have? I checked the tech specs and my graphic card is compatible with Quartz Extreme so theoretically it should be OK but I wonder if I will have issues...Thanks for any words of advice!
    eMac   Mac OS X (10.4.2)  

    Hi Timothy,
    Your eMacs should be fine; rendering time & RT effects are the places where you would see the main differences between your 700MHz eMacs and faster ones.
    My observations would be 1) 768MB is a little thin, imho, and if you could justify upgrading to 1GB RAM you will find things running better, and 2) for DV your eMacs are fine however for HDV, the FCE spec says minimum 1GHz processor and minimum 1GB RAM.

  • Slow down in X after kernel and xorg packages updated

    Just upgraded to the latest kernel and xorg with the following packages and X has taken a nose dive and slowed down drastically:
    kernelcairo-1.10.0-2  kernel26-2.6.35.7-1
    mesa-7.8.2-3  nss-3.12.8-1  xf86-input-evdev-2.5.0-1
    xf86-video-nv-2.1.18-1  xf86-video-vesa-2.3.0-3
    xkeyboard-config-1.9-1  xorg-server-common-1.9.0-1
    xorg-server-1.9.0-1  xterm-262-1
    Tried reinstalling nvidia, but no help there.  Reverting to the previous packages made things good again.
    Anyone else experiencing this?

    I can confirm nVidia's driver version '260.19.06'  fixes this render lag.
    This version is available in the AUR
    remember to exit xorg and remove the old module after installing
    # rmmod nvidia
    Last edited by gav616 (2010-10-07 17:05:17)

  • I have a eMac and i was wondering if its possible to upgrade the processor?

    I have an eMac and it is very slow so I was looking at upgrading some of the parts. I know I can fit in new RAM but is it possible to get and install a new faster processor?

    I vaguely remember there may have been one model that could be, but most are not upgradable, which exact eMac is it?
    So we know more about it...
    At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

Maybe you are looking for

  • How to repair corrupt \windows\system32\config\system files?

    T61 will not boot to Win XP - says the \windows\system32\config\system file is missing or corrupt. BIOS hardware test of disk drive passes.  When I place a Microsoft Win XP disk  to attempt a repair, the message says there is no disk drive detected.

  • ITunes shuting down when opening

    when i open iTunes on my windows 8 pc, a pop up comes on and sais that iTunes stoped working then iTunes closes and it does that every time. Ive tried uninstalling and re-installing it again many times but it still doesnt work. please help me

  • TO CREATE A TABLE IN JSF

    LIKE WE USE TABLE TAG AND <TD><TR> IN HTML....I WANT WE CAN CREATE A TABLE USING JSF TAGS IN A JSF PAGE.

  • Import data from csv to SQL database

    How to  Import data from csv to SQL database through BLS-xMII?

  • Can't sync file not written

    I bought a movie from itunes and when I synced my phone I got this error message of not being written. I think that is what it said. Unfortunately I unplugged the iphone and tried to sync it again and nothing happened. No pop up message and the movie