Emacs c-mode-hook no longer works?

I just did a pacman -Syu and c-mode-hook doesn't seem to get triggered anymore in emacs.  I tried adding a hook with just a print statement and it never printed anything.  Did the same for text-mode-hook and it printed out just fine.  I'm using c-mode-common-hook for now as a workaround (which works fine) but I'm curious what happened to c-mode-hook.  It's still documented as being there, I just can't get it to work.  Is anybody else seeing this or is my particular system just insane?
(I'm using emacs 24.4.1 on x86_64.)

Just to be clear, you are using Windows 7, right?
First, restart your PC.
Next, on the front of the printer: Setup > Network > Restore Network Defaults.
Next, do NOT use the CD to install the HP software, download and install this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76043-1&cc=us&dlc=en&lc=en&...
Make sure there is no USB cable connected to the printer when you install the software.  Choose "Wireless" as the installation type when it asks.  Follow the prompts to connect your printer to your network.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Yoga 13" - Touch Pad not disabled in tablet mode/F6 No longer works.

    I have updated all of my drivers from the Lenovo Yoga 13" site.  I read on here to pay special attention to the Synaptics driver, mine is 16.2.21.4 from Synaptics.  When I flip in to tablet mode my mouse moves around when I touch it.  Also the F6's "disable touchpad" doesnt work.  
    Its really annoying to not be able to use it as intended.  Anyone have a fix for this?

    hi OmegaNine,
    Sorry to hear what happened,
    1. Can we Try this,
     Go to Control Panel / Programs and features/ uninstall a program
        Look for the Synaptics Software, Uninstall it there.
    2. Go to Device Manager and look under "mice and game controllers" and make sure it does not say Synaptics there.
                  If it Does Uninstall it as well and put a check on the box if it asked "delete driver software"
    If the system did not asked you for a restart, Restart the system Manually.
    Open Device Manager again and open the category Sensor
      like on this photo
         http://www.codeproject.com/KB/system/wiisensor/wiisensor11.png
    Uninstall everything under Sensors but DO NOT put a check on the delete driver Software.
    Restart
    Download and install this driver
           Synaptics TouchPad Driver for 64-bit Windows
    Restart after installation and Check if You still have the Issue.
    Hope this helps
    Cheers!!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My iPhone seems to be in visual impaired mode, and the touch screen no longer works.  How do I get back to normal mode?

    My iPhone 4S seems to be in visual impaired mode, and the touch screen no longer works.  I have tried rebooting the phone without success.  How can I get back to normal mode?

    I solved my own problem by clicking the home button 3 times.

  • ABAP Web Dynpro Application changes in Administation Mode no longer working

    Hi Gurus,
    To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
    How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
    Thanks,
    Garth

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • ITunes classic visualizer no longer works in slide-show mode?

    I am using iTunes 8.1 (50) and have just noticed that the iTunes classic visualizer no longer works in slide show mode, which means that it just keeps the same colors and patterns without changing automatically, like it used to do. I can press "R" on the keyboard, which loads a new random collection of settings but again it just keeps them without changing. I tried also pressing "D" to go to default settings, but it did not help. Anybody else having this problem? Any ideas for a fix?

    Good to know it's not just me. Sure, the old visualizer is anything but a vital feature, but still it's cool to get some variety sometimes so I hope there comes a fix for it.

  • HT1329 My old computer with itunes no longer works.  If I hook my ipod to my new computer will I lose all the songs on the ipod?

    My old computer with itunes no longer works.  If I hook my ipod to my new computer will I lose the songs that are on it now?

    Yes, you will.
    Do you have the songs still?
    You could add them to your new library if you do.

  • My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    My daughter has been in peru for 5 weeks and has her phone on airplane mode and wi-fi and has successfully texted and facetimed when having wi-fi.  Now it is no longer working?  Any ideas?

    Basic Troubleshooting Steps when all else fails
    Quit the App by opening multi-tasking bar, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.
    Relaunch the App and try again.
    Restart the device. http://support.apple.com/kb/ht1430
    Reset the device. (Same article as above.)
    Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless.  I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?

    I hooked up new iMac to wireless network and now iPad and iPhone do not work using wireless. They did before hooking up the iMac. I am using a Netgear N300 router.  Also my Netgear ethernet/homeplug for wireless TV internet no longer works.  Any ideas?  I have tried unplugging, restarting, and resetting.  No luck!  Thanks!

    You should probalby contact Netgear

  • HT3176 Apple TV sleep mode remote shortcut no longer works? with new software update. Why? Is there an alternative other than nav to settings menu?

    Apple TV sleep mode remote shortcut no longer works with newest software update. Why? Is there an alternative other than nav to settings menu? Reset remote shortcut dead as well. :(

    Hold Menu + Play/Pause to reboot the box from the main menu.

  • Show history no longer works above enable mode

    Somewhere in the 15.2 train I noticed I could no longer see the command history in global config or any other config mode. It only works in enable mode.
    Has anyone else noticed this?
    Do I now have to enable show history for config mode?

    Hi Jason,
    I didn't know so far that the output of "do show history" in config mode shows the config commands too, particulary because the command description only says:
    To list the commands you have entered in the current EXEC session, use the show history command in EXEC mode.
    But your're right, with my 12.4(21) it does:
    R1(config)#do show history int loop0 ip addr 192.168.1.1 255.255.255.0 end
    However, if they've changed that behavior somewhere in 15.2, there's a simple alternative:
    R1#show run | b ^archivearchive     log config      logging enable      hidekeys!R1#show archive log config all idx   sess           user@line      Logged command 1     3        console@console  |interface Loopback0 2     3        console@console  | ip address 192.168.1.1 255.255.255.0
    That's even better because the archive remains after logoff.
    Hope that helps
    Rolf

  • My text notification light no longer works now since the Lollipop upgrade.  How do I get it back since i use my phone in silent mode most of the time?

    My text notification light no longer works now since the Lollipop upgrade.  How do I get it back since i use my phone in silent mode most of the time?

        We want you to love your software update pitbullmommy71! When did you update your phone? Have you tried going into phone settings and set up your notifications as you would like them? It can take a few days for your phone to normalize after the update, but this may be a bit much. Some apps may no longer be compatible with the new software so you can try running phone in Safe Mode or do a Hard Reset to see if this improves your phone. I've seen where some have completed a Hard Reset after the update and downloaded all same apps, and phone works flawlessly now. However, if you'd like to try Safe Mode first, (which is where all 3rd party apps are disabled), you can certainly try this for 24 hours to see if improves.
    Safe Mode: http://vz.to/1i0XGEW
    Hard Reset: http://vz.to/1GrhWqy
    Thank you,
    VanessaS_VZW
    Follow us on Twitter @VZWSupport

  • The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations, and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    The "Pin as app tab" produces tabs that do not persist across sessions. I have this problem on two installations (PC and laptop, both running Win7), and it's really annoying (since the Permatab Mod no longer works in Ff4). Can you offer any assistance?

    App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"

  • Undo close tab in Private Browser mode no longer works!?

    I'm using the Aurora build. The restore closed tab shortcut Ctrl-Shift-T no longer works in private browsing mode! This is very annoying since I cannot reopen accidentally closed tabs.

    I believe this problem started after they implemented private browsing in a new window instead of closing the existing window.

  • My ebook reader no longer works now I have upgraded to Lion.   I have reset the PRAM and tried booting in 32-bit mode, all with no joy.

    My ebook reader no longer works now I have upgraded to Lion. I have reset the PRAM and tried booting in 32-bit mode, all with no joy. Come on Apple, it worked fine with Snow Leopard.
    I see a lot of other people are having trouble with ebook readers, cameras, and other USB devices too.....

    antonfromnelson wrote:
    ...Come on Apple, it worked fine with Snow Leopard...
    Sorry, you're not talking to Apple here only other users like yourself.
    Someone might be able to help if you post which e-book reader you are using?
    Regards,
    Colin R.

Maybe you are looking for