Emagent takes lots of resources

Hi,
I have set up a test environment with IAS 10g which works fine. It's a PVI with 1.5 Gb RAM. My only problem is that it makes 1.5 load when it's in idle status (nobody connects to it or runs anything on it). The mid-tier and the infra also run on the same machine. I turned off what is not necessary (Discoverer,Portal,Wireless). This machine should go into production state within two weeks.
thank.,Sandor

We're experiencing the same problem. On a server that is already in production, emagent takes up about 25% of cpu, and the entire server has quite a high load number (around 3 most of the time, but going up to 8 on several occasions)
This is on a redhat enterprise linux server, with 9ias.
The machine has 2Gb of RAM. Did you manage to find out what causes the load yet?

Similar Messages

Does Task Scheduling use a lot of resources?

This is a curiosity question.
Instinctive I would say that task scheduling must use a lot of resources. Every fraction of a second the system must check the Task Schedule.
Does Task Scheduling use a lot of resources?

No it does not.
Windows uses task scheduling all the time without any impact on performance.
it is hard to find conceptual information on this, but it appears to me task scheduler does not check if there are possibly tasks that need to be executed each few miliseconds. Instead it sounds more logic taks scheduler waits for an interrupt to get
notified when conditions are met.
Think of it the other way around: mouse and keyboard also do not require much resources, allthough windows continuously needs to know whether a key is pressed or the mouse has moved. that is handled by interrupts. Aside of that, making a lookup (like checking
the current system time) does not use a lot of cpu time (even not miliseconds), given the fact modern cpu's do billions of operations per second (http://en.wikipedia.org/wiki/Instructions_per_second)
MCP/MCSA/MCTS/MCITP

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

Loading into the Infipackages takes lot of time

Hi Friends,
When i schedule and activate the process chain everyday, it takes lot of time to get loaded in the infopackages, around 5 to 6 hours.
in st13 when i click on the Log id name to see the process chain.
in the LOAD DATA infopackage it shows green, after double clicking on that, process moniter
i see request still running and its yellow but 0 from 0 records.
and this will be the same for hours
Its very slow.
need your guidence on this
Thanks for your help.

Hi,
What are you trying to load using this process chain? If it is cube, are you deleting the indexes on the cube before starting the load. If not, include that step as well in the process chain. This will help in getting improved performance.
Ideally it is always a good practice to delete the indexes before loading.
Regards,
Yogesh

Loading in infopackage takes lot of time

Hi Friends,
When i schedule and activate the process chain everyday, it takes lot of time to get loaded in the infopackages, around 5 to 6 hours.
in st13 when i click on the Log id name to see the process chain.
in the LOAD DATA infopackage it shows green, after double clicking on that, process moniter
i see request still running and its yellow but 0 from 0 records.
and this will be the same for hours
Its very slow.
need your guidence on this
Thanks for your help.

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) Check in SM58 and BD87 for pending tRFCs and IDOCS.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - System log can also be helpful.
Regards,
Habeeb

BO Report in 4.0 takes lot of time to open

Hi We are having BO 4.0 environment.
The underline database is SAP BW and BO reports are built on top of Bex queries.
We found that it takes HELL a lot of time sometimes to open in BI launch pad/Infoview.
Just for opening it takes lot of time we cound found that actually it is not running anything in BW or else .
Could you tell us better integartion or alternate solution even for integartion of BI/BO or may be there would be some problem with interface betwwe BO and BW .
eg Tomcat server slow etc ..
Thanks
Gaurav.

Hi Denis,
Extremely Sorry for not providing enough information.
Business Objects is of BO 4.0 FP3 SP12.
BI is 7.10 Support Package 10 and Revision 627.
The point is While Opening Report In BO 4.0,it takes lot of time to open.
This generally happens whenever we have to open report for the first time in laptop/Desktop machine.
This always happens whenever we open the report for first time. (Generally when we have demo team metting to show our reports to management level and we face it takes lot of time )
Could you let us know for the same if someone else has also received this.
Please let me know if any other details is required.
Regards
Gaurav.

Inserting into a base table of a materialized view takes lot of time.......

Dear All,
I have created a materialized view which refreshes on commit.materialized view is enabled query rewrite.I have created a materialized view log on the base table also While inserting into the base table it takes lot of time................Can u please tell me why?

Dear Rahul,
Here is my materialized view..........
create materialized view mv_test on prebuilt table refresh force on commit
enable query rewrite as
SELECT P.PID,
SUM(HH_REGD) AS HH_REGD,
SUM(INPRO_WORKS) AS INPRO_WORKS,
SUM(COMP_WORKS) AS COMP_WORKS,
SUM(SKILL_WAGE) AS SKILL_WAGE,
SUM(UN_SKILL_WAGE) AS UN_SKILL_WAGE,
SUM(WAGE_ADVANCE) AS WAGE_ADVANCE,
SUM(MAT_AMT) AS MAT_AMT,
SUM(DAYS) AS DAYS,
P.INYYYYMM,P.FIN_YEAR
FROM PROG_MONTHLY P
WHERE SUBSTR(PID,5,2)<>'PP'
GROUP BY PID,P.INYYYYMM,P.FIN_YEAR;
Please help me if query enable rewrite does any performance degradation......
Thanks & Regards
Kris

I like to know when i use fire fox why it take so much resource of my computer ? it almost 1/4 of my 4gig of memeory , ihave 6,7 page of firefox window open

i like to know when i use fire fox why it take so much resource of my computer ? it almost 1/4 of my 4 gig of memory , i have 6,-8 page of firefox window open at cpu level its is almost 25% been used up. i see its taking too much resource i wonder why ?? how not to take so much and it crashes often.. any help,ive 24.0 ,

Firefox add-ons take some memory. This amount varies depending on the add-on.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Does this decrease the memory usage? Please report back soon.

Report RSXMB_RESTART_MESSAGES needs a lot of resources

Hi,
we are using PI 7, SPS9.
When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
In the queues I can see a lot of entries made by the report.
Our report still have the field "max restarts" and I entered 5 restarts!
What can I do?
Thanks a lot!
regards
Wolfgang Hummel

Hi Sandro,
thanx for your answer.
This is a test system and at the moment I just defined jobs for deleting and not for archiving.
My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
regards
wolfgang

Execution of first request takes lot of time with JDBC OCI

Hi,
We are having an application which connects to Oracle server(10g Enterprise Edition Release 10.2.0.4.0 64bit) using Oracle JDBC OCI driver(10.2.0.1.0 production (10g R2)).
Everything works fine.
But what we observed is randomly the first request to the server vai JDBC driver in a day takes lot of time, varies from 5-15 minutes.
If we execute the request again it executed immediately
What we observed while debugging is preparedStatement.executeQuery() is taking time.
We enabled logging at the JDBC driver layer and a snapshot isgiven below. Between T2CPreparedStatement.doDefineExecuteFetch () and T2CPreparedStatement.execute_for_rows () it takes 5 minutes. Any idea why it takes this much time and reason for it? Oracle driver is not throwing any exceptions
*4-apr-2011 4:00:01* oracle.jdbc.driver.T2CPreparedStatement doDefineExecuteFetch
FINE: T2CPreparedStatement.doDefineExecuteFetch ()
*4-apr-2011 4:05:12* oracle.jdbc.driver.T2CPreparedStatement executeForRows
FINE: T2CPreparedStatement.execute_for_rows () returns: void
Detailed jdbc log is below
-apr-2011 4:00:01 oracle.jdbc.driver.OracleStatement doExecuteWithTimeout
FINE: OracleStatement.doExecuteWithTimeout() needToPrepareDefineBuffer = false
4-apr-2011 4:00:01 oracle.jdbc.driver.PhysicalConnection needLine
FINE: PhysicalConnection.needLine()--no return
4-apr-2011 4:00:01 oracle.jdbc.driver.PhysicalConnection registerHeartbeat
FINE: PhysicalConnection.registerHeartbeat()
4-apr-2011 4:00:01 oracle.jdbc.driver.OracleStatement executeMaybeDescribe
FINE: OracleStatement.execute_maybe_describe() rowPrefetchChanged = false, needToParse = false, needToPrepareDefineBuffer = false, columnsDefinedByUser = false
4-apr-2011 4:00:01 oracle.jdbc.driver.T2CPreparedStatement executeForRows
FINE: T2CPreparedStatement.execute_for_rows (executed_for_describe = false)
4-apr-2011 4:00:01 oracle.jdbc.driver.T2CPreparedStatement doDefineExecuteFetch
FINE: T2CPreparedStatement.doDefineExecuteFetch ()
4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement executeForRows
FINE: T2CPreparedStatement.execute_for_rows () returns: void
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleStatement executeMaybeDescribe
FINE: OracleStatement.execute_maybe_describe():return validRows = 1, needToPrepareDefineBuffer = false
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleStatement doExecuteWithTimeout
FINE: OracleStatement.doExecuteWithTimeout():return validRows = 1, needToPrepareDefineBuffer = false
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
FINE: OracleResultSetImpl.next(): closed=false
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
FINER: closed=false, statement.currentRow=-1, statement.totalRowsVisited=0, statement.maxRows=0, statement.validRows=1, statement.gotLastBatch=true
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
INFO: OracleResultSetImpl.getString(columnIndex=1)
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
INFO: OracleResultSetImpl.getString(columnIndex=2)
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getString
INFO: OracleResultSetImpl.getString(columnIndex=3)
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl getTimestamp
INFO: OracleResultSetImpl.getTimestamp(columnIndex=4)
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl wasNull
INFO: OracleResultSetImpl.wasNull()
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
FINE: OracleResultSetImpl.next(): closed=false
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl next
FINER: closed=false, statement.currentRow=0, statement.totalRowsVisited=1, statement.maxRows=0, statement.validRows=1, statement.gotLastBatch=true
4-apr-2011 4:05:12 oracle.jdbc.driver.PhysicalConnection needLine
FINE: PhysicalConnection.needLine()--no return
4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement closeQuery
FINE: T2CPreparedStatement.closeQuery ()
4-apr-2011 4:05:12 oracle.jdbc.driver.T2CPreparedStatement closeQuery
FINE: T2CPreparedStatement.closeQuery () returns: void
4-apr-2011 4:05:12 oracle.jdbc.driver.OracleResultSetImpl close
INFO: OracleResultSetImpl.close()
Regards
Sunil

Hi,
Thanks for the reply
- SQL may vary. Its not the same query which takes time always. The same query executed immediately(using another connection from pool) works perfectly
- If there is a failover or stale connection getting closed or timeout, will JDBC driver thhrows exdeption? I didn't see any exceptions in the driver logs. Is there anyway to identify whether failover or timeout is happening?
Some other points
- The application uses connection pooling. This means that connections are created in the beginning and kept in the pool. And it may be in the pool for 72 hours or , before this issue happens
- Application uses prepared statements and the statements are preapred and kept and re used later. So the query which take s more time might be prepared before 48 hours or so.
- This is not happening every day. Many times the pattern is , it happens after 60-72 hours after application is started.
Sunil

Read cluster PCL4 .. takes lot of time

Hi guys,
Though I Know this is a functional related forum, i would want to post techincal question related HR ABAP.
I have a report that needs to read data from PCL4 cluster and display master data changes for an employee. Developed a big program to simulate "RPUAUD00" that displays the logged data.
My concenr is the program that i developed is taking minutes to execute. I am using the 2 function modules "HR_INFOTYPE_LOG_GET_LIST" and "HR_INFOTYPE_LOG_GET_DETAIL" for this purpose.
The function module "HR_INFOTYPE_LOG_GET_LIST" takes lot of time to get executed as it checks all the personnel number with hanges even if there was only one personnel number that was changed. Assuming that my personnel area and personnel sub area has 2000 employees, even if one employee's data is changed, the function module reads the cluster for all the employee and takes a few minutes to comeback, before the function module "HR_INFOTYPE_LOG_GET_DETAIL" is executed to get the exact details changerd. This is irritating the client. Any idea how to reduce the time as i am severely short of ideas as how to.
regards
Sam

Unless you pass the exact pernr, the function cannot determine without looking at all the pernrs for changes..If your program tied to PNP, you can improve the run time passing the pernr list to the function call HR_INFOTYPE_LOG_GET_LIST..
~Suresh

Importing SLD content takes lot of time in Solman 4.0

Hi Folks,
Importing SLD content takes lot of time while installing Solution Manager 4.0. Its in the 42nd phase of 45...SQL 2005 DB.
Its stuck in Configuring system landscape directory....and NOT thrown any error as of now...touch wood.
Can anyone tell me how much time does it take OR is it gone in a loop?

HI All,
Finally I have received an error during the above mentionde phase....
sapinst.log -
>>>
Import Status: PREPARING
Import Status: PREPARING
Import Status: PREPARING
ERROR: CIM_ERR_FAILED: IO error: Read timed out
 CONFIGURATION=
ERROR 2007-10-22 15:55:34
CJS-30059 J2EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
java.exe.log -
>>>
Import Status: PREPARING
TYPE=A STATE= INFO_SHORT=com.sap.sld.api.wbem.exception.CIMCommunicationException: com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: IO error: Read timed out
 at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:158)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:720)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:694)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:638)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.referencesImpl(WBEMRemoteClient.java:375)
 at com.sap.sld.api.wbem.client.WBEMClient.references(WBEMClient.java:1773)
 at com.sap.sld.api.wbem.client.WBEMClientUtil.referencesComplete(WBEMClientUtil.java:490)
 at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.collectAssociationsForRestoration(SAPCRUpgrade.java:700)
 at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.delete(SAPCRUpgrade.java:355)
 at com.sap.lcr.pers.delta.importing.ImportHandler.loadFullImport(ImportHandler.java:1765)
 at com.sap.lcr.pers.delta.importing.ImportHandler.loadImpl(ImportHandler.java:1605)
 at com.sap.lcr.pers.delta.importing.ImportHandler.load(ImportHandler.java:1573)
 at com.sap.ctc.util.SLDConfig.importSldContent(SLDConfig.java:812)
 at com.sap.ctc.util.SLDConfig.performFunction(SLDConfig.java:154)
 at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:69)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.net.SocketTimeoutException: Read timed out
 at java.net.SocketInputStream.socketRead0(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:129)
 at java.net.SocketInputStream.read(SocketInputStream.java:182)
 at com.tssap.dtr.client.lib.protocol.streams.ChunkedInputStream.readLine(ChunkedInputStream.java:323)
 at com.tssap.dtr.client.lib.protocol.streams.ResponseStream.readLine(ResponseStream.java:271)
 at com.tssap.dtr.client.lib.protocol.impl.Response.initialize(Response.java:476)
 at com.tssap.dtr.client.lib.protocol.Connection.getResponse(Connection.java:2604)
 at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1578)
 at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
 at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
 ... 30 more
caused by:
java.net.SocketTimeoutException: Read timed out
 at java.net.SocketInputStream.socketRead0(Native Method)
 at java.net.SocketInputStream.read(SocketInputStream.java:129)
 at java.net.SocketInputStream.read(SocketInputStream.java:182)
 at com.tssap.dtr.client.lib.protocol.streams.ChunkedInputStream.readLine(ChunkedInputStream.java:323)
 at com.tssap.dtr.client.lib.protocol.streams.ResponseStream.readLine(ResponseStream.java:271)
 at com.tssap.dtr.client.lib.protocol.impl.Response.initialize(Response.java:476)
 at com.tssap.dtr.client.lib.protocol.Connection.getResponse(Connection.java:2604)
 at com.tssap.dtr.client.lib.protocol.Connection.sendInternal(Connection.java:1578)
 at com.tssap.dtr.client.lib.protocol.Connection.send(Connection.java:1427)
 at com.sap.sld.api.wbem.client.WBEMHttpRequestSender.send(WBEMHttpRequestSender.java:142)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:720)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:694)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.send(WBEMRemoteClient.java:638)
 at com.sap.sld.api.wbem.client.WBEMRemoteClient.referencesImpl(WBEMRemoteClient.java:375)
 at com.sap.sld.api.wbem.client.WBEMClient.references(WBEMClient.java:1773)
 at com.sap.sld.api.wbem.client.WBEMClientUtil.referencesComplete(WBEMClientUtil.java:490)
 at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.collectAssociationsForRestoration(SAPCRUpgrade.java:700)
 at com.sap.lcr.pers.delta.importing.SAPCRUpgrade.delete(SAPCRUpgrade.java:355)
 at com.sap.lcr.pers.delta.importing.ImportHandler.loadFullImport(ImportHandler.java:1765)
 at com.sap.lcr.pers.delta.importing.ImportHandler.loadImpl(ImportHandler.java:1605)
 at com.sap.lcr.pers.delta.importing.ImportHandler.load(ImportHandler.java:1573)
 at com.sap.ctc.util.SLDConfig.importSldContent(SLDConfig.java:812)
 at com.sap.ctc.util.SLDConfig.performFunction(SLDConfig.java:154)
 at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:69)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
// => Importing Data : E:/usr/sap/SOL/SYS/global/sld/model/CR_Content.zip URL=http://devsrv:50100 USER=J2EE_ADMIN ...
Import Status: PREPARING
ERROR: CIM_ERR_FAILED: IO error: Read timed out
 CONFIGURATION=

FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward.

FFox 3.6.8. Repeated problem. I close it, then hours later try to relaunch it, and it says it's still running. So I have to End Process in Task Mgr. Also, plug-container keeps running and takes LOTS of memory. Ergo, 3.6.8 is a step backward. I wish I hadn't upgraded. What can be done?
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.8. Not before.

See http://kb.mozillazine.org/Firefox_hangs and [[Firefox hangs]] (Hang at exit)

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

Can I install PSE 10-13 Win7-8 without the Organizer (uses a lot of resources)?

You can't install them separately, but it is easy to place unique shortcuts on the desktop for organizer and for editor.
In Organizer, go to Edit>Preferences>Auto Analyzer options and uncheck analyzer and people recognition if you don't use them - may improve resource utilization.

In the closure of Adobe, the process remains active and takes too much resource processor. Expected results:The process AdobRd32.exe has to be correctly closed.

In the closure of Adobe, the process remains active and takes too much resource processor.
Expected results:The process AdobRd32.exe has to be correctly closed.

I'm not sure on a Mac, but when I have this issue, I simply kill the thread (task-manager/processes/select the process, kill thread)
I have had no ill effects doing this.
It is my belief, it is the cloud, since they have a dcc connection, you can disconnect from the cloud, close everything, and the cloud is still connected to you. This is a feature of their update process I suppose.(speculation) Additionally, I remember reading somewhere this issue was due to applying administrative permission at the instigation of the installation. (which I do allow *some* trusted companies to have this so updates can be applied during my downtime. )
I have never had any overt issues after killing the thread and I have done that many times.
Hope this helps

Emagent takes lots of resources

Similar Messages

Maybe you are looking for