Email Account Problems after iOS 5.0.1 update on iPad 2 & iPhone 4

After finishing the iOS 5.0.1 update - I have noticed none of my email accounts are working (i.e. Error saying Incorrent Password or Username).
I have deleted the associated accounts and added them once again, verifying both username and passwords as well and now it will NOT verify any accounts on both. Still no luck on both devices.
Odd that both devices email accounts stop working after the new update?
Anyone know of a fix/problem?
Thanks!

Same problem, this happens with any Safari site that requires a user name and password to log in ... frustrating!  I have also posted this issue and will be stopping by Apple on my way home ... I'll let you know what I find out.

Similar Messages

  • HT1766 After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Gmail problems after iOS 7.1.2 update (blank mails)

    Since updating my iPad Air to iOS 7.1.2 this week, I notice that my emails are retrieved as blank light gray mails. No subject, no contents, date always 01-01-01, etc...
    I already removed my gmail account from the iPad and installed it again, but without any effect. The first time I retrieve my email after reinstalling works fine, but the second time, etc.. It's the same story...empty mails. The same thing happens when I re enter my password for the gmail account in the settings menu from the IPad. The first time it works ok, but then the story repeats...
    When using the Gmail app everything's seems to work fine!
    I suppose its a firmware bug?
    regards,
    René

    I'm having a related problem. Since shortly after updating my phone to ios 7.1.2, gmail is not working properly. Seems emails are bypassing the actual inbox(es) and going straight to the All Mail folder (which is for archives). I do not have any filters set up in gmail or any forwarding and had not changed any of my settings in gmail. This is happening on phone, laptop and ipad.
    I read a forum where someone was having this issue and changed their archive mail settings on the phone to archive only on the phone, not the server. That apparently worked for them, but I tried this and it hasn't seemed to make a difference.
    I have about 6 emails feeding into gmail so I NEED them separated. Fishing through All Mail trying to find things I need or am expecting is not ideal. If anyone has suggestions, please feel free to pass along.
    Thanks!

  • IPAD 1 problems after ios 5.1.1 update, itunes does not recognize IPAD.. I check the device manager, it identifies an unknown device (My ipad) but unable to use it.

    I am using the generation 1 IPAD.
    I recently updated my ios from ios 4 to ios 5.1.1, I did the restore after the update and all seemed fine as it was detected the first time.
    I tried connecting the IPAD again but it shows that the computer, itunes is not able to detect the IPAD.
    I checked on the device manager, it identifies an unknown device (IPAD) and says no software for the driver. I am using windows 7 on my laptop. I never had any such problem with the iso 4. Any suggestions as to how this can be solved?
    Thanks,
    Vinay

    Thank you, I tried uninstalling the device driver to reinstall again. After doing the scan for hardware changes, nothing flashes on the device manager. I dont see anything related to the IPAD or any other device for which driver shows unidentified device. It is as though the device is not being seen by the computer at all..
    I even tried flashing the home/sleep buttons together but that doesnt seem to identify any device either.
    Anything else I am missing?

  • WiFi Problem after iOS 4.3.3 update

    Hi
    After the update to the IOS 4.3.3 all of the IPAD 2 from my company(six IPAD 2) I started to have many problems connecting to wireless network from my company.I saw that the IOS 4.3.4 the bug persists.
    I would to now if the IOS 4.3.5 fix this BUg or i have to wait until IOS 5.
    Regards
    VC
    iPad

    First, Thank you for the support that you are given me related to this situation,but you have to understand my reluctance to accept that this is not a IOS problem because all the six / seven have the same problem.
    (five minutes after)
    I tested a new connect using WEP and I coul connect with problem.When i try to use WP2-PSK, no connection.This situation in both technologies(Cisco and Alcatel)

  • Ipad Air 32 Go: restore problem after iOS 7.1.1 update

    Hello,
    After over the air update on my iPad Air 32Go : after 18Mo downloading from "Settings"/"Software Update" and automatic restart, suddenly a itunes logo appears...
    So I plug it on my macbookpro and launch iTunes:  my iPad is détected a new empty ipad !!!: everything is disappeared ....
    So I launch restore from backup file but a window appeared and said that some parameters are not compatible with iPad Air. !!!!
    After selected continue button to launch restoring: after 5min ( very short when you have 29 Go of backup file of Nov 25 2013: see below !!! )
    After auto restart, iPad Air is always empty as new !!!
    So how to fix my iPadAir problem and restore it ?
    Thank You
    iTunes 11.1.5
    MacOX 10.8.5
    iPadAir 32Go iOS 7.1.1 (before upgrade --> iOS 7.1)

    Try setting up as a new device first.
    After it is up and running, reset it (Settings > General > Reset > Erase All Content & Settings) and during the setup select Restore from iTunes Backup then connect to iTunes

  • IPad Audio Problem after iOS 4.3.2 Update

    Had no problems with my iPad prior to iOS 4.3.2.  Now, I have lost audio on most of my apps (ABC Player, HBO, Jumbline2,) but not on Netflix, iPod, uTube, etc.  Restored device and deleted affected apps to no avail.  Called AppleCare and they told me that since I had audio on other apps the problem most likely was that the affected apps were not compatible w/ the new iOS and to wait a few days for updates.  It's been a week and still no updates.  I don't see any posts talking about the problem I have.  Anyone else having this problem?

    I too had this problem. I had no idea why my audio quit working. I tried the troubleshooting here and figured out I had accidentially moved the switch by the volume control button on the side. I've been going 2 weeks without audio on most my apps. I changed the side switch to Lock Rotation, but still had to slide the side switch back and forth one time to get it to unmute.  Yes, it was simple to fix, once I knew what I was doing wrong.  oops : \

  • Any problems after ios 5.0.1 update

    please list the problems that you are facing while using ios 5.1 on your ipod touch 4g

    My iPod is stuck on the "connect to iTunes" screen, is not recognized by iTunes, and I have spent the better part of a day trying everything that has been suggested, including going through all of the support site's steps, to get it back in action... I might have to take a trip to my local apple store but would prefer not to have to! Any other tricks???

  • Imessage problem after ios 5.1.1 updating directly from device.

    My iphone 4s cannot receive imessages and send messages only as emails after updating to ios5.1.1 directly from the device(not with itunes). In the imessage section , to the part where my number is , it says that has an error. Any help??

    Settings > General > Reset > Reset Network Settings.
    If that does not resolve, basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • Battery life greatly decreased after ios 5.0.1 update on iPad 2 and iPhone 4S

    Really disappointing considering my iPad 2 battery life used to be great, lasting up to a week with no recharge necessary.  Now my iPad battery life drops 1% every few minutes of casual use.
    My iPhone 4S battery life under ios 5.0 used to be decent and could hold the charge well when idle only losing 1% every few hours as long as it was just sleeping.  Now I am losing 10 - 15% every few hours when it is just sleeping.  When I surf the net, I lose 1% each minute! This is with pretty much every battery wasting feature turned off except Siri.
    I'm not sure how Apple managed to exacerbate a problem affecting tens of millions of people around the world with a fix that they've had weeks to test.  I mean they could've just emailed me and asked me to test it before they released it to the public, I could've told you within a few minutes that it didn't work.
    Apple consistenly have problems with each new iPhone release.  They just can't seem to get it 100% right.  The camera, antenna and speed have vastly improved over the iPhone 4, but arguably the most important feature has taken a nose dive in quality.  I can't believe they marketed this phone as having IMPROVED battery life?  I don't think one person will agree that that is an accurate statement.

    Do you have wifi syncing turned on? Is your itunes always open?
    There is a glitch with the iPad where, as long and anytime iTunes is open, it'll sync...like once an hour or some such rate.
    Originally the wifi syncing was only supposed to take place if the device is plugged into power, but that's not the case. If I have my iTunes open my iPad will try to sync almost continuously.
    So check your wifi sync and iTunes settings (my iTunes used to be set to open automatically when the device is connected, I had to change it to only open when I do it manually because in the course of an evening's surfing my iPad opened my iTunes and started to sync three different times until I turned it off)
    If you have iCloud syncing enabled that may also be contributing to your battery issues. I don't sync over iCloud, I tried it but after it ate all my contacts, I stopped using it. However, if the same glitch is present, the device trying to continually sync even when not plugged into power, that could also be part of your drain.

  • Unable to connect to iTunes after iOS 6.0.1 update on iPad 3

    After I updated the other day I can no longer get new apps or update my current apps.  I keep getting a message saying I cannot connect to iTunes. I have tried some solutions that I found (moving the date to 2013 & updating my banking info on iTunes) but nothing works.  I am connected to the Internet (I posted this on my iPad).  Any solutions out there or do I need to call apple?

    You can try these suggestions and see if any work for you. The first one is definitely an iOS 6 only suggestion.
    Settings>Privacy>Location Services>System Services (swipe to the bottom of the page to find this)>Location Based iAds>Off.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try again.
    Even though you are connected to the Internet, it might help if you reboot your router anyway. Unplug it for about 30 seconds and thenlug it in again.

  • Problems with sound from external speakers after iOS 5.0.1 update

    Have others experienced problems with external speakers on the Iphone 4 after iOS 5.0.1 update?  My phone no longer rings, sounds when i receive a text message, sounds alarm, etc.  Vibrate works fine and when i plug in headphones I can hear music through the headphones.  Any fixes for this?

    Hi Guys,
    I have post eariler on another forum and I have the same problem, I have tried all the things listed here and nothing was perminant in fixing this painful iphone hating problem.... and failed.  You probably have the problem when you use youtube or your music external speaker that there is no volume bar and no sound.   I have had the same problem But I need to happily say that I now have the fix!!!!  This worked for me and I fixed it by myself so you don't need to go to apple or service centre or anything.
    Ok I like so many of you here truly believed this was as IO5 issue as it only dropped the sound on the speakers once that IO5 update came along.  I tried a bunch of reset, reboots, home clicks, lock and unlocks, to fix this and all failed.  some worked for an hour but then failed.  hours of my life that I will never get back.   but since I have learnt this is not a IO5 problem but a hardware issue! ...  and in paticualar is has to do with your bottom connection.  Your phone is thinking it is docked all the time.
    To fix the no sound problem what you need is...
    1.  a torch
    2.  a tooth brush
    3.  methalated spirits
    4. a butter knife
    Step 1.
    get your torch and shine it down the bottom connection plate to see what kind of dust, sand, hair or anything you have stuck in there.   all that need to be removed!  everything!  it might look clean but still thats ok go to step 2.
    step 2.
    Turn on your music app and put the speakers on!  If your phone is like mine it should not work.  you most probably don't even have the volume display to turn it on but its ok, just do it! and it should still play with no sound.   its important you try and run the speakers as this will show you that it is a hardware problem.
    step 3.
    Dip your tooth brush into some methated sprits.   then at your sink tap the exess metho out of your brush as you just want the brushes to be slightly damp, not soaking wet and then scrub the bottom connetiors on your iphone.  work the brush back and forward in a way that scoops the dirt out of the phone, not just pushing it side to side.
    (As you bushing you should notice the volume bar come back on or off as you scub.   This happened to me and that is how I realised I was on the right track to fixing this problem as I was doing something external that was actually controling when the volume display came on or off.   but once I cleaned it this still didn't fix the problem...)
    Step 4.
    Use the back side of a butter knife (not the sharp side) to gently slide over the connectors on the iphone.  Do this gently as you are only pushing down on the tiny metal contect bars and you should notice the volume display come on again.  slide it back and forward.  Now the area of interest is about 2/3 along the connection plate to the right.   This is the area that has the infomation sent when your iphone thinks its docked.
    This has worked for me and I have not had a problem since I did this 2 weeks ago.   I have since learnt that the new IOS 5 has activated a different part of the bottom conectors.  if you have been using dodgy connectors or unapproved apple cables (as I was)  any damage or hair and dirt on the terminal this is effecting it.  Try it.   just remember if you can do something external to your phone then there lies the problem.
    Hope this works for your phone as it did for mine.
    Cheers

  • Email attachment problem on iOS 5.1

    Since the update to ios 5.1 all attachments sent from my work email arrive on my iPad as Winmail.dat files.  This does not happen on my android phone (the same email has the File correctly attached and readable.  Furthermore, this problem did not exist prior to updating my iPad this weekend.

    Troubleshooting winmail.dat files: http://support.apple.com/kb/TS1506
    There are also a number of apps that support winmail.dat files

  • TS3899 I currently have  live email account but after a few weeks it stops sending me a message to let me know I've got mail. Is there any way this can be sorted as I need notified of mail as it comes in through work. Thanks

    I currently have a live email account, but after a few weeks it stops notifying me that I've got mail. Is there anything I can do as I need notified of incoming mail for work at all times

    I copied text & paisted it and then draged the 3 photos from the file...then clicked on the photo then clicked the inline boxon tool bar nexed to floating one and that is how I did it
    I do not know what you mean "cut & paist"  how do I get the photo in from my picter folder if I do not drag it to the page in Pages? 
    I went to my photo folder and copied a photo and paisted the photo on the top left part of the page and it went there but there was no text to the right of photo...I could crop the photo to what ever size but no text to the right of photo...
    This is just too big of a mess of a program as it should be easier then this,,,I hav e 300 photos in this project and would have to re-paist them all...that is nuts...
    I see the button to the right of inline and floating that has 6 [lace to have the photo but the text does not float around the photo...
    If this is what your talking about this very little freedom in my page layout as I need it to let me place it where I need it to be and the wrap the text...
    There has to be an easier way to get my books ready for other formats other that Apple's iPad...iBooks Author was way eisier to make ready for iTunes...Love that program!!!
    Want my books for sale on all the other formats and was told by Apple Pages whould do it...
    I must be be out to lunch or the designers at Apple are ???

  • HT4623 my i phone got hanging problem after ios 7 installation?

    Dear friends
    my i phone got hanging problem after ios 7 installation?
    please help me

    has your phone been jailbroken?

Maybe you are looking for

  • How to access kuler in Illustrator cs4

    I am still using Illustrator cs4, and I was working on a file, and when I tried to access Kuler, it said not connected.  I checked my internet connection and it is working fine.I even tried to access the update server and it said not available.  I wa

  • Execution time seems to be dependent on data when it shouldn't

    Hi, consider the code shown below.  It generates a 2D array of random values between 0 and 1 and then builds an array with values of 0 or 1 depending on whether the random value was greater than a predefined threshold or not.  I expected the running

  • How to fill Functional Area on Appropriation request

    Hi guys! We faced a problem to fill standart field IMAK-FKBER (functional area) on Appropriation request. Despite the fact it exists in standart table, there are no standart ways to fill that field through IMA1N or IMA11. However we assigned FA NG000

  • Write function inside edge ?

    How do I write a function to "display Off" of some of my symbols, so that I can call this function when a button is pressed. Currently I am using this. sym.$("Symbol_1").hide(); Since I have many symbols to be turn off at once,  manually turning off

  • Customizing OBIEE with BI Apps informatica

    We are in the process of customizing bi apps finance and have 3 new dimension tables to add to the existing facts. What is the best process to tie these new dimensions to the existing GL fact via ETL method. We have started by adding one wid column f