Email Alerts are working for some but not all users

If some users are getting the alerts and some not, it seems more likely that the issue is with your email server or email clients, not with your SW setup.
Have you checked SPAM / Junk folders on the server and on the clients?

We have alerts setup for multiple scenarios. All of our users are setup the same but not everyone is getting the alert. We are using the spiceworks mail servers and I have checked the Spiceworks App Notifications are set to Yes. Any ideas?
This topic first appeared in the Spiceworks Community

Similar Messages

LDAP works for some but not all

I have CPS set up, and it's been working for years, all of a
sudden all of my users at one location cannot authenticate. The CSI
file is fine, but it's had to be replaced a few times. The users
LDAP settings haven't changed.
The server is at siteA and all siteA users are fine. SiteB
users cannot authenticate to contribute, but they can log into VPN
and choose a VPN connection at siteA and they work just fine.
The Access Denied message is coming from CPS, and is not NTFS
or other security.
We've deleted an affected user and recreated the account in
CPS and still no luck.
Anyone Seen this issue before?

Problem resolved. After a few conversations with different
teams, we found a change that went in at the time this started and
investigated what that change was.
There is a new Wan optimization appliance that started being
used between site A and site B which apparently caused my problem.
Once my connections where excluded from this appliance, everything
started working again as normal.
Just in time, I was planning to tear down and completely
rebuild my server today.

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

Album Art works for most, but not all

I was reading previous forums on the subject, but no clear answer was given..
The album art shows up fine in itunes and my library and works for most of my music on my ipod, but how come some album's art does appear? I have it set manually and select 'Get Info' then 'Artwork' and add it from there, then drag in the finished product to my ipod. I've been doing that and it works fine for most of the albums, but every so often, the album art will not appear on my ipod. Am I doing something wrong? I take them all from the same source (amazon.com) but it makes no sense to me how some randomly don't appear.
I tried deleting the artwork and re-adding it, but nothing happened again. If you could answer why it works for most but not all or how I can get the album art to appear for the ones it will not by re-doing something, it would be appreciated. thanks.

I encountered the same problem in the beginning. When I compared the size of the original images, the working ones seemed to be smaller in general, so I reduced the size of all covers I intended to upload on the pod to 300x300 pixels.
This seemed to work - for 2 days. I bought the pod on friday, had pictures on sunday, but on Monday (after the first time the pod was fully discharged) none were left left.
So I ended searching this forum for related problems...
And decided to join my problem to this entry.

Quicktime working for some but not for others

Hello all,
I'm developing this website and it displays videos in quicktime format, but it's just not working for some people... It just won't play for some reason I just don't know 'cause I couldn't make the error happen to me and got no good help from others...
This is what's happening: @ www.thebrooklynbrothers.com/ clicking on "work, work and more work", then clicking on MEDIA and then FILM, it should display the QT movie and the user could play it, but for some reason it just shows up the QT logo and nothing more, as some people are telling me... could somebody check this out to see if it happens to you as well and tell me what could be the problem or any other details of the error so I can figure out what it is?
if you want to check a sample URL it loads from there, check this one: http://www.thebrooklynbrothers.com/new/portfolio/contentloader.php?file=cnneraq.mov&filetype=2
Thanks you so much for your time! ANY help would be greatly appreciated! I'm desperate right now!

I'm having a similar problem with videos uploaded onto my website. It all plays fine through Firefox and Internet Explorer on my other PC, but on this one (Win XP), I just get a blank page after it's finished loading. No video box or error mesage. Just lots of white space. I've checked all my settings, and have QT as my default player, but still nothing. Have also downloaded the latest QT updates. Is there something I'm missing in Windows or Internet Explorer? I don't have any problems with it on my Mac.
Thanks,
Lucy

IMAP Working for some but not others

I am having the issue of imap working for some users and not others. I have for instance 2 users both accounts the same. One account I can link via imap the other I can not. Both have the same group memberships, both are in the same post office. Everyone has imap access I have no restictrions set. Any idea where I should begin to look. The message I am receiving on the account the can get in is: user does not exist.
Thanks

gator17,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

SP2013 WF works for admin but not end-users

A simple SP2013 WF calls a SP2010 WF to send email, simple. Works for me (admin) but when a SP user edits an item on the list (which fires the WF), the WF gets to the 2010 call, and fails with this error...
RequestorId: f8c56627-e4e5-5a26-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"X-SP-SERVERSTATE":["ReadOnly=0"],"SPClientServiceRequestDuration":["61"],"SPRequestGuid":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"request-id":["f8c56627-e4e5-5a26-97ee-ad70ca4d3291"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["16.0.0.2930"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Wed, 25 Jun 2014 02:44:54 GMT"],"P3P":["CP=\"ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT
NAV ONL PHY PRE PUR UNI\""],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]} at System.Activities.Statements.Throw.Execute(CodeActivityContext
context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager
bookmarkManager, Location resultLocation) Exception from activity Throw If Sequence Sequence TryCatch Sequence Microsoft.SharePoint.WorkflowServices.Activities.RetryForDurationPolicy HTTPPost_WorkflowInterop_EnableEvents WorkflowInterop DynamicActivity<Guid>
Then If Working Sequence Flowchart Sequence RCSEmailCst.WorkflowXaml_4f7b53dc_968d_4e22_a812_3178e7b01bad
Spent an hour on phone with M$ support, only to be told it's my fault and I have to re-design my WF...if my WF gets any simpler I'll have to use carrier pigeons to get messages to customers!
I've Googled the error message, results suggest that User Profile Syn is out of whack but M$ support swears up & down our sync is working fine.
Anyone?
Edit to add: we have a hosted implementation of SP2013, NOT on-prem

Hi ,
According to your description, my understanding is that the SharePoint workflow 2013 does not work for end-users in your environment.
For your issue, it can be a permission for the user initiating the workflow. Please make sure site feature Workflows can use app permissions is activated. Go to Site actions > Site Settings >
Site features > Workflows can use app permissions. Make sure the user is one member of a SharePoint Group.
Also please provide more detail information about the error message to determine the exact cause of the error. You can have a look at the blog:
http://ranaictiu-technicalblog.blogspot.com/2013/03/sharepoint-2013-workflow-debugdiagnosis.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Flash Player works for Administrator but not other users

I have Flash Player 10.2.153.1 installed and I am running Windows Vista 32-bit and Windows Internet Explorer 8. If I am logged in as the Administrator I have no problem watching video previews from the Odeon and other similar websites. However, if logged on a Standard user account Odeon film previews cannot be seen - all I get is a blank white viewing box with a small square box in the top left corner with the colours red, green and blue in it (it is too vague to make out what the logo is even when zoomed in). The inability to watch video clips for Standard users seems to be random as some sites work while others do not? Can anyone help solve this problem? Why do I have this problems for the standard user accounts on some websites but not at all for the Administrator account on any website ???

Experienced same problems: http://forums.adobe.com/thread/790415
Would very much appreciate a solution.
Glocke

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred - any ideas?

My iphone 3G has worked fine via bluetooth with my BMS 3 series (57 plate) until I updated to V.5.0.1 software and now only some but not all contacts are transferred and available - any ideas?

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

My sound works for music but not apps

My sound works for music but not apps

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
To solve some sound problems, just follow these simple steps
1. Go to Settings
2. Tap on General
3. Tap on Reset
4. Tap on Reset All Settings
 Cheers, Tom

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

I have tried to sync my Iphone with my current Itunes and for some reason not all of my music is transferring to my Iphone. Some songs that were on my phone previously, are now not transferring. Any ideas?

I have downloaded all of the recent upgrades for both Itunes and Iphone. Now for some reason, not all of my songs in my playlists are transferring when I sync. Previously I have had the songs in the playlists on my phone, but now some of them are not there although they are listed and show in Itunes. Any ideas?

iTunes will only copy back iTunes purchased music. If you don't still have a copy of the music that you copied from CDs or bought from other stores anywhere (e.g. on another computer or on your backup of your library) then there are some third-party programs listed half-way this page which should be able to copy them back : Recover your iTunes library from your iPod or iOS device.

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-in

I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Email Alerts are working for some but not all users

Similar Messages

Maybe you are looking for