Email Alerts for Old Voicemails

For a little while now, I keep getting "New Voicemail" emails, but they're from voicemails from several days ago.
Any ideas what's going on?

Hi, Gtilflm, and welcome to the Community,
I have read many similar reports -- although neither do I know why voice mail notifications are behaving this way.  Thanks for your report which I have flagged to add to the others I have reviewed!
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Similar Messages

  • BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

    Hi All.
    I have this request.
    BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
    We have jobs scheduled on BODS running smoothly and absolutely fine.
    But to check, i am logging into the admin console and check for the jobs status.
    I would like to have an email to be received from BODS after each job is finished.
    It could succuessful. Or it could fail.
    Whatsoever, i wish to receive an email alert as soon as a job is finished.
    Can anyone advise me as to whether this could be made possible.
    And if yes, how this could be done.
    Thanks for your help in advance.
    In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
    Is there any option similar to that in BODS ?
    Also would like to know :
    how to use the smtp_to or mail_to functions ?
    how to set up the smtp server for this ?
    thanks
    REgards
    indu
    Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

    Hi.
    Since am new to this BODS. I need some help.
    I already have many jobs which are running absolutely fine.
    And when a job runs, and finishes, am able to see the trace saying
    e.g. :
    Job_abc is completed successfully.
    We got the smtp service activated for our test server.
    and we hae a group email id.
    I have put the details of the smtp server / ip address / and said apply restarted.
    The i created a simple test script as below :
    print (' Before email ' );
    smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
    ' the job has failed', 0, 0);
    print('After Email ');
    It does send a email to as per smtp_to whatever email is specified.
    But how to differentiate between a job success
    And a job which has failed.
    I wish to have a mail which says on the subject :
    'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
    ==> IF it is a success
    OR
    'Job ' || job_name() ||' on ' || host_name() || ' has failed'
    ==> if it has failed
    How to make the system identify, whether
    to send a success message or a error message whatever
    Could anyone advise.
    thanks
    indu

  • Have problem setting Email alerts for Calendar events. Warning message says I need to set up a card in Contacts with my email. I do but it doesn't recognize it. How do I indicate the email I want alerts sent to?

    The system of setting up email alerts for Calendar events worked fine in Snow Leopard but since I upgraded to Mt. Lion Calendar won't let me set email alerts. When I try, I get an error message saying I need to set up a card in Contacts for my email. I have a card set up in Contacts for both of my email addresses but it doesn't recognize them. Perhaps the name I have on the card doesn't match a name that Calendar is looking for. Calendar doesn't seem to have a way in Preferences or elsewhere to indicate the email I want alerts sent to. Any ideas how I can get this system working again? Thanks for your help.

    You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
    See if another contact is marked as this is my card.

  • I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen.  How can I make the sound alert work?

    I have had this same problem for weeks now with my 4S.  I just got a new 5S after being extremely frustrated and the same thing - no sounds.  After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?"  I didn't even know such a function existed.  Upon looking that was exactly the issue.
    To resolve, go to Settings> Do Not Disturb> Manual.  If it is green, turn it off.  You will now get phone calls and text alerts.
    This functionality is also on your quick access utility menu (slide up menu).  I assume this is how it was enabled on my phone.
    I will post on other sites since I searched for weeks for this solution and didn't see it anywhere.  Good luck!

  • Not receiving email alerts for CPUs

    I have set up my account with all the information and I have checked off the box to receive email alerts for the quarterly CPUs that come out and I am not getting the email alerts. I double checked my account and the box for alerts is checked. Is there anything that I am missing, ir is there any way to test this?

    If you have not received by tomorrow let us know. Also, keep in mind that MetaLink users also receive an alert, so perhaps your co-workers got that one.

  • Can i turn off email alerts for find my iphone

    How do you turn off email alerts for find my iphone?

    There is no way to turn it off, just reduce it. It is a new security feature. It depends on where you are logging in that is generating the email. If you are logging in from a computer browser, if you have cookies on, it should not generate the email except for the first time that you use that device. If it is from logging in to the Find My iPhone app on the iPhone or iPad, if you have a passcode lock set on the device, it will not generate the email, as you will not be logged out of the app on the phone. You just use the home button to get past the app and it stays logged in by not tracking. You open the app again and it will just take you right in without having the log in and will refresh itself.

  • Confgure email alerts for the *INTERNAL SAP MAILBOX* for CCMS

    Hello,
    I am currently workling on setting up a CCMS for monitoring the system performance of the server.
    This involves setting some profile parameters for the system in a way that if any of the parameters exceeded their threshold value an  automatic alert message is sent to a contact on his internal sap mailbox.
    Can someone provide guidance on how to confgure this email alerts for the INTERNAL SAP MAILBOX.
    Thanks,
    Rohit

    Hi,
              Please try this link.
    http://help.sap.com/saphelp_nwpi71/helpdata/en/2c/abb2e7ff6311d194c000a0c93033f7/content.htm
    http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    V...

  • Prime Infastructure Email alerts for example via Gmail ??

    Hello,
    I am using PI 2.1. Is it possible to e mail notification also set up a Gmail account? The client environment I have no Exchanche own server.
    Thanks for the help in advance.
    Andre

    Just an update for anyone who may stumble on this issue and have the same problem. In version 1.4 of Prime Infrastructure if you change your virtual domain in the top right and then go to alerts and choose email options you have a completely new list you can set up. Doing this you can do a root folder for a company or district you are providing for and setup email alerts for only that teir and bellow of access. This way they only see alerts from APs and devices they have access too. Meanwhile you can leave the root teir to email yourself and then separate them out via inbox rules as desired.
    This may be possible on older versions of Prime, but I did not notice the email alerts being an option while under the other domains until 1.4.

  • Customize daily email alerts for low storage on drive on server

    Hey, Hi, All,
    Thanks for the fantastic discussions, information, advice here. Great stuff.
    We have a server that sends email alerts for low storage on the file server. And we like those. But it is alerting us to low storage on the TimeMachine drive. We dont want it to alert us for the TimeMachine drive but we do want to be alerted to the other drives. We have seen a little bit of hacking going on out there on the interwebs but not yet anything that seemed quite enterprise-grade.
    If any one knows how to instruct the OS to monitor some disks but not other disks, please let us (and everyone else) know.
    Thanks much.
    Jason

    Hi @unslog,
    I see by your post that you would like to know how to monitor the toner. If it is possible to be emailed notification. I can help you.
    Unfortunately there isn't a way to be emailed notification of the toner level that I am aware of.
    You might be able to get a App to do this. I did come across this forum that you may take a look at.
    Email notifications on Network Printer Ink/toner level.
    You can check the toner level a few ways.
    Toner-level status light on the printer. You do not need to replace the supply at this time unless print quality is no
    longer acceptable.
    Access the printer's Embedded Web Server, by typing the IPv4 address in the address bar of a web browser. If the printer is networked.
    Print a Supplies Status Page. On the printer, go to Setup, Reports, Supplies Status.
    If you are using the older ePrint website, you should be able to view the toner levels there. If you are now using the HP Connected web site, it should provide any errors  for the printer, but I don't believe it will show the toner levels.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I set up an email Alert for a Calendar event?

    I can't figure out how to set up an email Alert for a Calendar event at icloud.com or on an iOS device.  Am I missing something?

    Try this support article Dave..
    iCloud: Calendar Events, Reminders, To Dos, and Tasks behavior differs by application

  • Emails alerts for skype voice messages = haywire

    within the last week, i can't count on emails alerts for skype voice messages.  the email notifications during the past week have been false or out of date.  its confusing because these skype email alerts tell me i just got a voice message (sometimes in the middle of the night) when there has been none.  btw the emails are clearly not spam, they are emails from skype (i've checked the raw header) there is no trojan attached, the links work to skype's website.  this is a problem on skype's end.  i temporarily unsubscribed from email alerts about voice messages just to save myself from the confusion.  skype, please fix this, i miss my email notifications working as they should!

    so, even though i changed my settings to NOT send me email alerts for voice messages, i'm still receiving the same false email alerts.  so, your email alert system is broken skype.  there is no rhyme or reason to the order of them too, i get an alert about a message from 4 days ago and then one from 5 days ago and then one from 3 days ago all at random times compared to when the message was actually left.

  • Email Alert for Specific Server Groups

    We are using SCOM 2012 R2. We have windows server 2003 and 2012 servers. 
    I configured email alerts for this servers. 
    Criteria: 
    Notfiy on alerts
    of a critical severity.
      and of a high priority
      and with New(0) resolution state.
    I succesfully recieve alerts and emails from this configuration.
    But i want to recieve email alerts from specific Windows Server 2003 servers or Windows Server 2012 servers.
    I create a server 2003 and server 2008 group in scom.
    I use  "raised by any instance in a specific group" OR "raised by any instance of a specific class". I shutdown one of the servers. I can see alerts in scom active alerts section (hearthbeat alerts) but i cannot recieve emails about
    this alerts.
    If i use monitor rule (for example printer spool service rule) , I can recieve emails but it does not for work hearthbeats alerts.
    I recently install Windows Server MP and Active Directory MP .

    Create a group containing watchers/watcher groups for your servers and use this group in subscription filter. See this
    post for more info.
    Gleb.

  • Email alert for update failure

    HI,
    I want to configure email alerts when an update fails for only a few transactions

    To monitoring the failed updates in SM13 you should go to
    RZ20 ->
    SAP CCMS Technical Expert Monitors ->
    All Contexts on Local Application Server ->
    Update
    UpdateServices
    Old Update Record
    Select this MTE and click in Proprerties.
    In the performance Attribute have the thresholds that will be compared with the last 24 hours, the the number of the update is around the threshoulds, the new alert will be created.
    To get an email you should check the  note #176492 and ensure than all steps are right in the configuration.
    TO check if the email configuration is right you can trigger an auto-reaction method manualy.
    Goto the monitor (in RZ20), Extras - >Active mantainance function
    Select the item and go to Edit -> Nodes -> Start Methods -> Start AutoReaction
    And check if the emails are display in SCOT or SOST transaction.
    Cheers Clebio

  • SCOM 2012 SP1 Can't get email alerts for Heartbeat Failure or Computer Unreachable when combined with Group.

    Hello,
    I have SCOM 2012 SP1 RTM POC lab.  I have created a dynamic group that picks up my system center servers based on some simple criteria and this works fine.
    I have set up a subscription for critical and high severity alerts originating from this dynamic group called SCOM Servers to send emails to a distribution.  This also worked well for any critical alert that was NOT Heartbeat Failure or Computer Unreachable. 
    I see those in the console but no email.
    So I set up a new subscription by right clicking on the alerts and here's the kicker.  If add no other conditions to these subscriptions, they will send emails to the DL I provided, but if add the condition initiating from group, and specify my dynamic
    group SCOM servers, no email alert.  But the alert still appears in the console.
    Any ideas on this?  I would like the appropriate support groups to get these types of alerts for the servers that they support (i.e. SCOM will get SCOM servers, Exchange Admin will get Exchange and never the two roads shall meet.).
    I even tried some internet posted custom management pack, but I couldn't import it after adding the code that he listed.
    I mean, isn't this a basic requirement for any mid-sized company?
    Any help is greatly appreciated.

    Hi Donald,
    Like Dan says you need to add the "Health Service Watcher" objects to the groups as wel. Unfortunately this cannot be done in the Dynamic group Editor but has to be done in the XML. Export the XML and add the following piece of code between the
    lines </MembershipRule></MembershipRules>:
    <MembershipRule>
     <MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthServiceWatcher"]$</MonitoringClass>
    <RelationshipClass>$MPElement[Name="MicrosoftSystemCenterInstanceGroupLibrary7084300!Microsoft.SystemCenter.InstanceGroupContainsEntities"]$</RelationshipClass>
    <Expression>
    <Contains>             
    <MonitoringClass>$MPElement[Name="SystemCenter!Microsoft.SystemCenter.HealthService"]$</MonitoringClass>
          <Expression>
    <Contained>         
    <MonitoringClass>$MPElement[Name="MicrosoftWindowsLibrary7084300!Microsoft.Windows.Computer"]$</MonitoringClass>
              <Expression>
                <Contained>
                  <MonitoringClass>$Target/Id$</MonitoringClass>
                </Contained>
              </Expression>
            </Contained>
          </Expression>
        </Contains>
      </Expression>
    </MembershipRule>
    Save the XML delete the old one in OpsMgr and import the edited.
    For SP1 the SystemLibrary version is 7.0.8430.0. If this is not your version you need to edit this in the code above.
    Hope this helps,
    Regards Marthijn van Rheenen
    Blog: Heading To The Clouds

  • Email alert for fault message

    Hi guys
    i have define a fault message for a Async interface where the proxy is going to send back a fault message .
    This will show up as applilcation error within PI..
    I wanted to confirm if this will raise a email alert ??? I think it will

    >>i have define a fault message for a Async interface where the proxy is going to send back a fault message .
    >>This will show up as applilcation error within PI..
    When you return fault message (application error) as response , PI will treat as response message. This is not something like system error. In this case mesg process will be completed.
    >>>I wanted to confirm if this will raise a email alert ??? I think it will
    Only if you use CCBPM and raise exception via control step then you can send mails via alert configuration.   In your case you will not get any email unless you create custom coding.

Maybe you are looking for