Email and Photo issue since update

Ever since the 2.2 firmware update the images I email from my 3g iphone are displaying very low res on my wife's phone and vice versa. She emailed me some photos that looked fine before the update and now they are all pixelated. Has anyone else had this issue since the update?

This is a known bug and the subject of a big thread here:
http://discussions.apple.com/thread.jspa?threadID=1802430&tstart=45
There is not much you can do about it other than hope for an upgraded firmware release.
The photos are stored on the phone in the proper resolution, and you can copy them to your computer and they look fine.

Similar Messages

  • IMessage and Memory issues since updating iPhone to ios 8.1.3

    I stupidly updated my iPhone 5S due to the idea of a wider variety of emojis and now everything has gone wrong. My iMessage keep disappearing and reappearing or not coming through at all on my phone but they're all still coming through perfectly fine on my Macbook. As well as the iMessage issue my iPhone keeps on insisting me memory is full even though I've deleted pretty much everything, nothing loads my screen just crashes then goes back to homepage...my patience is running low and by the looks of Twitter I'm not the only one facing these issue my only wonder now is what, if anything can I do?

    Greetings Nezza80,
    After reading your post, it sounds like you are experiencing an error when viewing videos. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    How to restart
    Press and hold the Sleep/Wake button until the red slider appears.
    Drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities.
    Best,
    Bobby_D

  • When emailing a photo from the updated iPhoto, how do I find the CC and BCC button, and how do I send to a group from my address book?

    when emailing a photo from the updated iPhoto, how do I find the CC and BCC button, and how do I send to a group from my address book?

    The email function from iPhoto is pretty basic. The only Bcc available is to yourself (in iPhoto > Preferences > Advanced), cc: does not appear to be available at all, and it does not appear you can email to a group.
    You can change this by going to iPhoto > Preferences > General and next to where it says Email photos using: select Mail. If you do this you have all the options available in Mail including Cc: and Bcc: and the ability to drag a group from Address Book into the mail addresses.
    Best of luck.

  • Issues since update to yosemite

    Hello everyone,
    I've been having all sorts of issues since updating to yosemite which I am struggling to fix on my macbook.
    I've had the mac since 2010/11 and the first thing I noticed after updating to Yosemite was the fan constantly running from the moment I boot the machine and that the icons on my desktop were extremely slow to load up as are any files in the documents folder and finder.
    Then watching videos on youtube etc were refusing to play fully. I have since updated to the latest flash player but it is still slow.
    I ran the activity monitor and a kernel task file is operating at around 120% all the time.
    I have read numerous posts on the internet to try to fix and have upgraded to the latest yosemite, reset the printers and many other things.
    Now the trackpad is no longer working and not recognised and now the final straw for me is the keyboard refusing to be recognised at startup. I am currently using a wired mouse and bluetooth keyboard to get around these problems and everything is working fine with these but is a real pain.
    Has anyone had any similar problems to the above and know how to sort as this is taking up way too much of my time.
    Thanks

    What is the exact, complete text of the error message you get?

  • I have deleted email and photos from my device but icloud still says I don't have any storage

    I have deleted emails and photos from my device but iCloud still says I don't have enough storage to download the latest iOS version

    You'll have to delete more data from the device. 
    Go to Settings>General>Usage to see how much "Storage" you have available on the device.  (Ignore storage on icloud, since that is not part of the equation.)

  • Mail and photo issues - two part question!

    Hello,
    The Mail function on both iPad and iPhone stopped working a couple of days into a trip we just took out of the country.  I had to sign into my Gmail account to receive and send emails and photos.  It literally quit on June 9....  I've checked all the settings and can't figure it out even when a message appears saying I am not connected and to check settings.....so frustrating.
    In addition..we imported new photos from our camera to photo stream and when I looked for an older photo, I realized that all the old photos were gone!  I have different photos on camera roll...those taken with iPhones (emailed or my own) or my iPad.  Is there a limit on the number of photos Photo Stream will hold - and if so...where did the older photos go??? 
    Thanks for any help you can offer on either or both points. 

    Do you have the source code to the original DOS program? If not, you have a REALLY big job ahead of you trying to figure out what all the bytes represent.

  • HT4623 Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

    Why on earth don't you tell people to back up contacts and photos before they update software? There was no mention of the need to back up until it was too late. I have lost hundreds of valuable phone numbers and photographs.

    The update process DOES back up contacts and photos, unless you interrupted the backup. The manual tells you to sync contacts to an app on your computer, and to import photos regularly to your computer. So Apple DID tell you to back up, you just didn't bother to read it.
    If you didn't sync yet (and even if you did) connect the phone to your computer, right click on its name, and choose "Restore from Backup". If there's more than one backup choose the one with a timestamp before you updated.

  • A Kernel Panic and two Crashes since updating to 10.8.1

    I've been running a 15" MacBook Pro (Mid 2009) for about a year and a half.  It's factory stock (no hardware modifications) with a 2.8 Core 2 Duo processor and 4gig RAM with a 500GB HD.  It came with 10.5 installed.  I upgraded to 10.6, 10.7 & 10.8 respectively.  Each time a new operating system came out, I did a clean install.  My system has been 100% reliable up until I installed the 10.8.1 update.  Since then, I've had a Kernel Panic and two separate crashes.
    I doubt it's a hardware issue as it's never been suspect before.  Also, I've run Disk Utility and verified the disk and permissions.  No Problems there.
    The first problem was the Kernel Panic, which occurred while I was in the guest account watching YouTube videos.  The system went to a gray screen then gave me the typical "Panic" message and rebooted itself.
    The second problem must have occurred while the computer was in sleep mode, as I don't recall any particular issue, but I found a CRASH log in the logs folder.
    Finally, I encountered the most recent crash while I was exiting out of the ADMIN account on my computer.  The system went to a gray screen with a rotating bezel indicator, and wouldn't return to the log-in screen.  I had to manually cycle the power button in order for the computer to reboot.
    I'm not sure what's going on. 

    Hi. Since updating to 10.8 I've had numerous kernel panics on start-up. A restart always worked successfully, but it's getting annoying. I started out by replacing the HD with an SSD. That didn't work. Then I resent the PRAM/NVRAM. That seemed to work. Then I upgraded to 10.8.1 - and we're back to kernel panics.
    Here's the log, and below it are photos of the initial kernel panic. :
    29/08/2012 10:30:58.000 bootlog[0]: BOOT_TIME 1346232658 0
    29/08/2012 10:31:00.000 kernel[0]: Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    29/08/2012 10:31:00.000 kernel[0]: vm_page_bootstrap: 859948 free pages and 114900 wired pages
    29/08/2012 10:31:00.000 kernel[0]: kext submap [0xffffff7f8073e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800073e000]
    29/08/2012 10:31:00.000 kernel[0]: zone leak detection enabled
    29/08/2012 10:31:00.000 kernel[0]: standard timeslicing quantum is 10000 us
    29/08/2012 10:31:00.000 kernel[0]: standard background quantum is 2500 us
    29/08/2012 10:31:00.000 kernel[0]: mig_table_max_displ = 74
    29/08/2012 10:31:00.000 kernel[0]: corecrypto kext started!
    29/08/2012 10:31:00.000 kernel[0]: Running kernel space in FIPS MODE
    29/08/2012 10:31:00.000 kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    29/08/2012 10:31:00.000 kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    29/08/2012 10:31:00.000 kernel[0]: corecrypto.kext FIPS POST passed!
    29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    29/08/2012 10:31:00.000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for TMSafetyNet
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Sandbox
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    29/08/2012 10:31:00.000 kernel[0]: calling mpo_policy_init for Quarantine
    29/08/2012 10:31:00.000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    29/08/2012 10:31:00.000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    29/08/2012 10:31:00.000 kernel[0]: The Regents of the University of California. All rights reserved.
    29/08/2012 10:31:00.000 kernel[0]: MAC Framework successfully initialized
    29/08/2012 10:31:00.000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    29/08/2012 10:31:00.000 kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    29/08/2012 10:31:00.000 kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
    29/08/2012 10:31:00.000 kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration begin ]
    29/08/2012 10:31:00.000 kernel[0]: console relocated to 0xf10010000
    29/08/2012 10:31:00.000 kernel[0]: PCI configuration changed (bridge=2 device=1 cardbus=0)
    29/08/2012 10:31:00.000 kernel[0]: [ PCI configuration end, bridges 5 devices 18 ]
    29/08/2012 10:31:00.000 kernel[0]: NVEthernet::start - Built Jun 25 2012 17:20:40
    29/08/2012 10:31:00.000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    29/08/2012 10:31:00.000 kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    29/08/2012 10:31:00.000 kernel[0]: rooting via boot-uuid from /chosen:
    29/08/2012 10:31:00.000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    29/08/2012 10:31:00.000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    29/08/2012 10:31:00.000 kernel[0]: AppleIntelCPUPowerManagementClient: ready
    29/08/2012 10:31:00.000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/M4-CT512M4SSD2 Media/IOGUIDPartitionScheme/Aidan's SSD@2
    29/08/2012 10:31:00.000 kernel[0]: BSD root: disk0s2, major 1, minor 2
    29/08/2012 10:31:00.000 kernel[0]: Kernel is LP64
    29/08/2012 10:31:00.000 kernel[0]: BTCOEXIST off
    29/08/2012 10:31:00.000 kernel[0]: BRCM tunables:
    29/08/2012 10:31:00.000 kernel[0]: pullmode[1] txringsize[  256] reapmin[   32] reapcount[  128]
    29/08/2012 10:31:00.000 kernel[0]: highWaterMark: VO[  192]  VI[  192]  BE[  192]  BK[  192]
    29/08/2012 10:31:00.000 kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID d49a20fffefbdb82; max speed s800.
    29/08/2012 10:31:00.000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
    29/08/2012 10:30:58.141 com.apple.launchd[1]: *** launchd[1] has started up. ***
    29/08/2012 10:30:58.141 com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    29/08/2012 10:30:59.971 com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    29/08/2012 10:31:00.000 kernel[0]: NVEthernet: Ethernet address d4:9a:20:fb:db:82
    29/08/2012 10:31:00.000 kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:96:cc:0e
    29/08/2012 10:31:00.000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    29/08/2012 10:31:00.000 kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    29/08/2012 10:31:01.891 airportd[27]: _processDLILEvent: en1 attached (down)
    29/08/2012 10:31:02.000 kernel[0]: createVirtIf(): ifRole = 1
    29/08/2012 10:31:02.000 kernel[0]: in func createVirtualInterface ifRole = 1
    29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff802049dc00
    29/08/2012 10:31:02.000 kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    29/08/2012 10:31:02.000 kernel[0]: Created virtif 0xffffff802049dc00 p2p0
    29/08/2012 10:31:02.229 com.apple.SecurityServer[17]: Session 100000 created
    29/08/2012 10:31:02.000 kernel[0]: NVDANV50HAL loaded and registered.
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][start] -- completed
    29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe
    29/08/2012 10:31:02.000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8213 FirmwareVersion - 0x0201
    29/08/2012 10:31:02.000 kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    29/08/2012 10:31:02.000 kernel[0]: Previous Shutdown Cause: 3
    29/08/2012 10:31:02.000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    29/08/2012 10:31:02.282 com.apple.SecurityServer[17]: Entering service
    29/08/2012 10:31:02.383 UserEventAgent[13]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    29/08/2012 10:31:02.000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
    29/08/2012 10:31:02.000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
    29/08/2012 10:31:03.000 kernel[0]: DSMOS has arrived
    29/08/2012 10:31:03.000 kernel[0]: macx_swapon SUCCESS
    29/08/2012 10:31:03.051 hidd[56]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    29/08/2012 10:31:03.075 appleeventsd[61]: main: Starting up
    29/08/2012 10:31:03.105 mDNSResponder[49]: mDNSResponder mDNSResponder-379.27.1 (Aug  1 2012 20:12:04) starting OSXVers 12
    29/08/2012 10:31:03.176 configd[19]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    29/08/2012 10:31:03.177 configd[19]: DHCP en1: INIT transmit failed
    29/08/2012 10:31:03.202 loginwindow[52]: Login Window Application Started
    29/08/2012 10:31:03.279 awacsd[65]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49)
    29/08/2012 10:31:03.000 kernel[0]: 00000000  00000020  NVEthernet::setLinkStatus - not Active
    29/08/2012 10:31:03.341 awacsd[65]: InnerStore CopyAllZones: no info in Dynamic Store
    29/08/2012 10:31:03.363 mDNSResponder[49]: D2D_IPC: Loaded
    29/08/2012 10:31:03.363 mDNSResponder[49]: D2DInitialize succeeded
    29/08/2012 10:31:03.530 com.apple.usbmuxd[37]: usbmuxd-268.5 on Apr  5 2012 at 15:33:48, running 64 bit
    29/08/2012 10:31:03.551 configd[19]: network changed: DNS*
    29/08/2012 10:31:03.441 systemkeychain[70]: done file: /var/run/systemkeychaincheck.done
    29/08/2012 10:31:03.563 configd[19]: setting hostname to "Aidan-Byrnes-Computer.local"
    29/08/2012 10:31:03.646 locationd[53]: NOTICE,Location icon should now be in state 0
    29/08/2012 10:31:03.674 mds[48]: (Normal) FMW: FMW 0 0
    29/08/2012 10:31:03.676 WindowServer[86]: Server is starting up
    29/08/2012 10:31:03.680 WindowServer[86]: Session 256 retained (2 references)
    29/08/2012 10:31:03.680 WindowServer[86]: Session 256 released (1 references)
    29/08/2012 10:31:03.703 WindowServer[86]: Session 256 retained (2 references)
    29/08/2012 10:31:03.705 WindowServer[86]: init_page_flip: page flip mode is on
    29/08/2012 10:31:03.779 coreservicesd[29]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    29/08/2012 10:31:03.881 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    29/08/2012 10:31:03.882 apsd[67]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    29/08/2012 10:31:04.048 netbiosd[72]: Unable to start NetBIOS name service:
    29/08/2012 10:31:04.249 WindowServer[86]: mux_initialize: Couldn't find any matches
    29/08/2012 10:31:04.276 WindowServer[86]: GLCompositor enabled for tile size [256 x 256]
    29/08/2012 10:31:04.276 WindowServer[86]: CGXGLInitMipMap: mip map mode is on
    29/08/2012 10:31:04.311 WindowServer[86]: WSMachineUsesNewStyleMirroring: false
    29/08/2012 10:31:04.312 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
    UUID
    29/08/2012 10:31:04.312 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    29/08/2012 10:31:04.323 WindowServer[86]: Created shield window 0x5 for display 0x04272240
    29/08/2012 10:31:04.324 WindowServer[86]: Created shield window 0x6 for display 0x003f003d
    29/08/2012 10:31:04.331 WindowServer[86]: Display 0x04272240: GL mask 0x1; bounds (0, 0)[1280 x 800], 30 modes available
    Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9c89, S/N 0, Unit 0, Rotation 0
    UUID
    29/08/2012 10:31:04.331 WindowServer[86]: Display 0x003f003d: GL mask 0x2; bounds (2304, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    29/08/2012 10:31:04.331 WindowServer[86]: CGXPerformInitialDisplayConfiguration
    29/08/2012 10:31:04.331 WindowServer[86]:   Display 0x04272240: MappedDisplay Unit 0; Vendor 0x610 Model 0x9c89 S/N 0 Dimensions 11.26 x 7.05; online enabled built-in, Bounds (0,0)[1280 x 800], Rotation 0, Resolution 1
    29/08/2012 10:31:04.331 WindowServer[86]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2304,0)[1 x 1], Rotation 0, Resolution 1
    29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
    29/08/2012 10:31:04.000 kernel[0]: 05f5e100  00100026  NVEthernet::setLinkStatus - Active
    29/08/2012 10:31:04.000 kernel[0]: Ethernet [nvenet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0000,0de1,0005,41e1,0000]
    29/08/2012 10:31:04.000 kernel[0]: 05f5e100  00100026  NVEthernet::setLinkStatus - Active
    29/08/2012 10:31:04.449 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, accelerator 0x00003863, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    29/08/2012 10:31:04.452 WindowServer[86]: GLCompositor: GL renderer id 0x0102260e, GL mask 0x00000003, texture units 8, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
    29/08/2012 10:31:04.456 loginwindow[52]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:04.469 hidd[56]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    29/08/2012 10:31:04.517 WindowServer[86]: Unable to open IOHIDSystem (e00002bd)
    29/08/2012 10:31:04.000 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
    29/08/2012 10:31:04.608 WindowServer[86]: Created shield window 0x7 for display 0x04272240
    29/08/2012 10:31:04.608 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    29/08/2012 10:31:04.662 com.apple.launchd[1]: (name.razzfazz.daemon.iScroll2[104]) Job failed to exec(3) for weird reason: 2
    29/08/2012 10:31:04.668 launchctl[97]: com.apple.findmymacmessenger: Already loaded
    29/08/2012 10:31:04.730 com.apple.SecurityServer[17]: Session 100005 created
    29/08/2012 10:31:04.770 hidd[56]: CGSShutdownServerConnections: Detaching application from window server
    29/08/2012 10:31:04.770 hidd[56]: CGSDisplayServerShutdown: Detaching display subsystem from window server
    29/08/2012 10:31:04.834 loginwindow[52]: Login Window Started Security Agent
    29/08/2012 10:31:04.950 SecurityAgent[107]: This is the first run
    29/08/2012 10:31:04.950 SecurityAgent[107]: MacBuddy was run = 0
    29/08/2012 10:31:05.015 SecurityAgent[107]: User info context values set for aidanbyrne
    29/08/2012 10:31:05.300 configd[19]: network changed: v4(en0+:134.220.228.104) DNS+ Proxy+ SMB
    29/08/2012 10:31:05.331 root[114]:  sntp sendpkt: sendto error: No route to host. Couldn't send packet!
    29/08/2012 10:31:05.331 root[114]: on_wire failed for server 0.0.0.17!
    29/08/2012 10:31:05.349 ntpd[34]: proto: precision = 1.000 usec
    29/08/2012 10:31:05.493 loginwindow[52]: Login Window - Returned from Security Agent
    29/08/2012 10:31:05.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::init][75.15] init is complete
    29/08/2012 10:31:05.522 loginwindow[52]: USER_PROCESS: 52 console
    29/08/2012 10:31:05.604 com.apple.launchd.peruser.501[115]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    29/08/2012 10:31:05.609 loginwindow[52]: Connection with distnoted server was invalidated
    29/08/2012 10:31:05.633 distnoted[118]: # distnote server agent  absolute time: 7.965250809   civil time: Wed Aug 29 10:31:05 2012   pid: 118 uid: 501  root: no
    29/08/2012 10:31:05.791 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:05.808 com.apple.SecurityServer[17]: Session 100006 created
    29/08/2012 10:31:06.000 kernel[0]: [ffffff8021495800][BNBTrackpadDevice::handleStart][75.15] returning 1
    29/08/2012 10:31:06.000 kernel[0]: [ffffff8021601c00][AppleMultitouchHIDEventDriver::start] entered
    29/08/2012 10:31:06.000 kernel[0]: [ffffff80216af100][AppleMultitouchDevice::start] entered
    29/08/2012 10:31:06.014 talagent[128]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:06.188 SystemUIServer[129]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:06.217 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:06.323 configd[19]: setting hostname to "wxp-itr11564.unv.wlv.ac.uk"
    29/08/2012 10:31:06.324 WindowServer[86]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    29/08/2012 10:31:06.888 NetworkBrowserAgent[139]: Starting NetworkBrowserAgent
    29/08/2012 10:31:07.016 Finder[130]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:07.142 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[157]) Exited with code: 2
    29/08/2012 10:31:07.423 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2) Throttling respawn: Will start in 10 seconds
    29/08/2012 10:31:07.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=159[GoogleSoftwareUp] clearing CS_VALID
    29/08/2012 10:31:07.527 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Library/CFMSupport/CNQL1212_ButtonManager.app
    29/08/2012 10:31:07.527 loginwindow[52]: Unable to lauch startup item: (null)
    29/08/2012 10:31:07.533 com.apple.launchd.peruser.501[115]: (com.apple.afpstat-qfa[156]) Exited with code: 2
    29/08/2012 10:31:07.742 Folder Actions Dispatcher[160]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:07.788 loginwindow[52]: Login items - LSOpenApplication returned error -10665, url=/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app
    29/08/2012 10:31:07.788 loginwindow[52]: Unable to lauch startup item: (null)
    29/08/2012 10:31:07.892 System Events[166]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.135 NotificationCenter[146]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.413 WindowServer[86]: Display 0x04272240: MappedDisplay Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 3)
    29/08/2012 10:31:08.506 coreaudiod[106]: 2012-08-29 10:31:08.505832 AM [AirPlay] Started browsing for _airplay._tcp.
    29/08/2012 10:31:08.507 coreaudiod[106]: 2012-08-29 10:31:08.507315 AM [AirPlay] Started browsing for _raop._tcp.
    29/08/2012 10:31:08.678 TISwitcher[168]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.736 com.apple.dock.extra[165]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.762 coreservicesd[29]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=129
    29/08/2012 10:31:09.026 GoogleSoftwareUpdateAgent[159]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    29/08/2012 10:31:09.102 SystemUIServer[129]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
    29/08/2012 10:31:08.046 CCAAgent[163]: ****************************************
    29/08/2012 10:31:08.047 CCAAgent[163]: **          CCA agent starts!         **
    29/08/2012 10:31:08.047 CCAAgent[163]: ****************************************
    29/08/2012 10:31:08.294 CCAAgent[163]: CCAAgent Logfiles: (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/event.log) (/Users/aidanbyrne/Library/Application Support/Cisco Systems/CCAAgent/eventPrevious.log)
    29/08/2012 10:31:08.458 DictationIM[178]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:08.844 BezelServices 235.55[52]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    29/08/2012 10:31:09.170 CCAAgent[163]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:09.292 blued[64]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
    29/08/2012 10:31:09.415 locationd[187]: NOTICE,Location icon should now be in state 0
    29/08/2012 10:31:09.467 UserEventAgent[142]: cannot find fw daemon port 1102
    29/08/2012 10:31:10.036 CoreLocationAgent[189]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:11.013 Dropbox[167]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:11.424 CalendarAgent[153]: -[SOAPParser:0x7fb0d8c971e0 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.431 LKDCHelper[198]: Starting (uid=501)
    29/08/2012 10:31:11.458 CalendarAgent[153]: -[SOAPParser:0x7fb0d98b3560 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.459 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8c98230 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
    29/08/2012 10:31:11.495 CalendarAgent[153]: -[SOAPParser:0x7fb0d98f9e70 parser:didStartElement:namespaceURI:qualifiedName:attributes:] Type not found in SOAPDocument for html (html)
    29/08/2012 10:31:11.498 CalendarAgent[153]: [com.apple.calendar.store.log.exchange.queue] [error = Error Domain=CalExchangeErrorDomain Code=-2 "Calendar can’t refresh the account “wlv.ac.uk”." UserInfo=0x7fb0d8cea360 {NSLocalizedFailureReason=The primary email address for the account can’t be found., CalFailedOperationKey=<CalExchangeSyncAccountOperation: 0x7fb0d9897830>, NSLocalizedDescription=Calendar can’t refresh the account “wlv.ac.uk”.}]
    29/08/2012 10:31:14.284 Image Capture Extension[214]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:14.316 CIJScannerRegister[215]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3). Setting up event to tell us when to try again: 2: No such file or directory
    29/08/2012 10:31:15.303 com.apple.launchd.peruser.501[115]: (name.razzfazz.daemon.iScroll2[218]) Job failed to exec(3) for weird reason: 2
    29/08/2012 10:31:16.224 awacsd[65]: Exiting
    29/08/2012 10:31:23.456 com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[103]) Exit timeout elapsed (20 seconds). Killing
    29/08/2012 10:31:31.525 com.apple.SecurityServer[17]: Session 100002 created
    29/08/2012 10:31:36.000 kernel[0]: Sandbox: sandboxd(232) deny mach-lookup com.apple.coresymbolicationd
    29/08/2012 10:31:37.404 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelCrusher.component
    29/08/2012 10:31:37.409 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component/Contents
    29/08/2012 10:31:37.414 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelCrusher.component
    29/08/2012 10:31:37.419 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelPhat.component
    29/08/2012 10:31:37.424 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component/Contents
    29/08/2012 10:31:37.428 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelPhat.component
    29/08/2012 10:31:37.433 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-data /Library/Audio/Plug-Ins/Components/CamelSpace.component
    29/08/2012 10:31:37.438 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component/Contents
    29/08/2012 10:31:37.442 sandboxd[232]: ([106]) coreaudiod(106) deny file-read-metadata /Library/Audio/Plug-Ins/Components/CamelSpace.component
    29/08/2012 10:31:47.300 Safari[242]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:47.327 WebProcess[244]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:31:50.474 PluginProcess[247]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:32:03.134 Safari[242]: CGContextClipToRect: invalid context 0x0
    29/08/2012 10:32:03.539 WebProcess[250]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:38:22.299 Dock[127]: no information back from LS about running process
    29/08/2012 10:38:22.373 Console[341]: Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    29/08/2012 10:41:22.416 com.apple.launchd.peruser.501[115]: (com.apple.KerberosHelper.LKDCHelper[198]) Exited with code: 1

  • To all experiencing burn issues since updating to last version of iTunes

    To all that have been experiencing difficulties burning music since updating to iTunes6:
    After reviewing this discussion board it seems obvious to me -I am not a technician but nonetheless- that the problems that we are experiencing are due to some kind of incompatibility between our PCs and Apple.
    While some here have been very helpful in trying to resolve these issues, I find it disgusting that Apple does nothing. Itunes customer support do nothing. We are left to fend for ourselves, frustrated by the amount of money we have invested in building up our music collections in order fot them to be held hostage because Apple and/or iTunes will not address the issue.
    Did anybody bother reading the software license upon updateing to the earliest version? Is it too early to talk of "class action" suits?
    It seems logical to me that we will be heard better by Apple if we speak as a collective and not individuals. Maybe that way we could put more pressure on them to either fix what needs to be fixed or refund the money we have invested in iTunes.
    As for me, iTunes has already lost me as a client. I won't download any more music because there is nothing I can do with it. That doesn't seem to matter to them. I suppose this is what happens when you get too big for your own britches!
    Any ideas on how we can take down the bully????

    Lost data from iTunes on upgrade? See Empty/corrupt library after upgrade/crash.
    Restored an older backup to the device? If you're lucky your most recent photos may be in your Photo Steam.
    Otherwise you may need to paint a fuller picture of the problem...
    tt2

  • RV042G Log Email and other issues

    The RV042G manual said to use this site for support so here goes.  After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01.  Overall the RV042G hardware appears to function pretty good.  The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082.  I have now owned the RV042G about two days and have found a number of issues.  Specifically, emailing logs doesn't work. 
    - Emailing logs does not work.  RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password.  I have tried SMTP servers that require no authentication and ones that do, none of them work.  RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not.  Additionally, there is NO output in the logs to show a failure.  So TWO bugs here.  I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
    Email is my primary issue, any suggestions on getting this working would be appreciated.  I've also identified a number of other issues as well and included them here to avoid multiple posts.  These are:
    - Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com).  This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
    - Port 1 is CLOSED and apparently responds to interrogation.  This was NOT the case for the RV082.  Normally I would be good on the RV082.  I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance).  BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries.  So there are TWO bugs here.  This is a potential security vulnerability.
    - The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs.  Another poster identified this problem so this is confirmation of that issue.  Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning. 
    - Authentication failures will show up in the System Log but not in the Access Log?
    - HTTPS html interface works fine in Firefox.  However, turn it off and use just HTTP and there is a problem.  Can't see the forms and buttons, can only see the background image.  This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
    - RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
    One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01.  Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with.  Here is what the firmware update page shows:
      "Cisco RV042G Dual Gigabit WAN VPN Router"
         "Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)". 
    The problem is that you reset the hardware version in the RV042G (V01).  Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01. 
    I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature).  The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

    Guess I spoke too soon.  If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443.  So have to use an access rule to kill it off.  Can STEALTH Port 1 as well with an access rule but have to block all traffic there.  Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
    So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead.  (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall.  No response at all.  Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address.  The port still shows up as OPEN but won't connect.  Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
    For clarity, I have the RV042G V01 with Firmware Version :   v4.2.1.02 (Jan 18 2012 14:10:55). 

  • Email and Contact Issues

    My emails are not coming through to my phone unless I manually refresh. I have three accounts setup (Yahoo! and 2 school email accounts). Both school accounts, when I sign on from a computer says something about Outlook: one says Mircosoft outlook and the other says Outlook live.
    I contacted my school and got the correct settings for each account. They work because I get the emails as long as I manually refresh. I initially had my phone set to check for mail every hour but after realizing it was not automatically doing this, I set it for every five minutes. That still didn't help.
    Out of frustration, I called Verizon who told me they knew nothing about such an issue. They connected me to Samsung who said the same thing. Apparently they were both lying as I have Googled this issue and see that it has been posted since Sept 2010. I just have not noticed a solution (possibly overlooking it).
    The solution that they gave me was so a hard reset (didn't work), delete then re-add the accounts (didn't work) or use a workaround. My response to their last suggestion was that I did not feel it was necessary for me to do that when the phone I purchased was supposed to handle email. This has been an issue since I got the phone in Nov 2010 when I switched to VZ. I didn't really notice it until this month because I was having text messaging issues which they didn't fix until this month.
    Samsung ended up telling me to send them my phone and they would troubleshoot it but I had to contact VZ about getting a loaner phone as they were going to have it for a week. When I called VZ back, they told me they would just send me a replacement phone and to not send the phone to Samsung because they could have given me a defective phone. The order wasn't placed because their system was down that Friday and the guy was supposed to call me back. He never did so I called VZ a third time.
    The tech support rep told me that she was positive that if I got a brand new phone I would still have the same problem because its a known issue that Samsung has yet to fix. Also she had the same phone and also some other people she worked with. She told me to make sure I deleted junk mail, sent stuff, kept the inbox down, and empty the trash and that should help. She was supposed to call me back and see if it helped (which it didn't). She never called back....that was Monday and today is Friday.
    Now I'm feeling like they are lying to me because they don't want to replace my device. Then on top of that they told me it would more than likely be a refurbished device instead of a brand new device even though I still have a warranty. Should I push for a new phone or is this really a known issue with Samsung that they have yet to fix? If it is a Samsung issue, what's the workaround until they actually fix it?
    By the way, Gmail works almost instantaneously. They told me to forward all of my mail there but that didn't work for my two school accounts. I don't like that anyway.
    As for the contact issues, I just noticed two weeks ago that my Facebook and Twitter contacts are unsyncing themselves. I don't have all of my Facebook friends or Twitter followers in my phonebook but those whose phone numbers I have, are linked to their Facebook and or Twitter accounts but I notice that both of these accounts unlink themselves. I have no idea why this happens. I keep having to go back into my phonebook and relink about 30 people to their Facebook and or Twitter profiles. Any idea why?

    10sEn wrote:
    In your email app, have you tried going into each account, pressing the menu button, account settings, and setting email check frequency to the desired time?
    If that's not the issue, then perhaps pressing the menu button at the home screen, going into settings, accounts and sync, and clicking the background data option is the issue.
    The reason why Gmail works well is that instead of polling (which is what the email app uses, where it queries the account to see if there's anything new), it pushes your email through meaning that it's virtually instantaneous.
    With regards to the Twitter and Facebook issue, try going into the accounts and sync area that I mentioned before.  There, you will be able to set the SNS sync interval and sync the contacts, birthdays, and whatever else it allows.  You'll probably have to click on each of those accounts to check various options before it will autosync.
    My frequency is set to every 5 mins. That hasn't worked. 
    The background data sync option is clicked already.
    The Twitter and Facebook SNS syncing is set. I have noticed though that sometimes when I go in there, the sync arrow is red by Twitter and Facebook. I uncheck the box and recheck it and then it turns green again. What I don't know is why it randomly turns red in the first place. I'm assuming this is the reason the Facebook and Twitter stuff unsyncs itself. 

  • Email and editor issues

    I am having several issues with Elements 11.  I cant e-mail photos using the share>e-mail, i have tried to use the adobe e-mail service but it doesn't work and does windows live even work anymore?  when I am in the organizer and want to do a full edit it will not open the picture in the editor, it does open the editor but not the picture.

    I'm sorry you're having problems with the email services.  The issue you're describing is related to the timeout feature of the website; for your security, the website will timeout and require you to login again in order to access information and/or process a request (such as sending an email).  The issue of the timeout comes into play when writing a long email or allowing the page to sit without making any movement or changes; typing in the email window does not constitute active movement.  What I would suggest is that when writing a long email, use a word processing program (like Microsoft Word) to compose the email, then sign-in to your email account and copy/paste the message.  This way you will not lose your email or have to worry about the timeout feature.  Also, if you have email programs on your computer (i.e. - Outlook Express, etc.), you can configure those to work with the Verizon email service so you'll no longer have to login to the website for access.
    Please let me know if you have any other questions.  Thanks!
    Karl
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • Late 2013 MBP w/Retina Battery Charging Issue since update to 10.10.2

    I don't know if this is due to the update to OS X 10.10.2, or if it's just coincidence, but ever since updating, my battery has had issues charging.
    When I plug into an outlet, the indicator in the menubar shows that it's plugged in, light on the power cord doesn't light up (not amber, not green, nothing) and the percentage estimate for power remaining doesn't increase at all, no matter how long I'm plugged in for.
    I thought it maybe had to do with more things being plugged into the powerstrip, so I tried plugging into an directly into a wall outlet, but that was no use.
    The only way to get the battery to start charging again is to restart AND zap the PRAM; clearly this isn't optimal...
    Is any one experiencing this type of issue as well? Any hints or ideas as to how to fix it?
    Thank you!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
      If this does not help, back up your Mac and try reinstalling the OS X.
        Reinstall OS X.
        http://support.apple.com/kb/PH18872?viewlocale=en_US&locale=en_US

  • Email and Synching issues

    How do I get my Hotmail account to synch with my droid.
    If I delete an email on my computer --- it still shows on my phone.  If I delete an email in my phone....it does not update on my computer.  I am hitting the refresh but guessing there is something else missing.
    Or have I purchased a phone where now I have to keep up my email in two locations....I am not going to be happy if that is the case!

    Here is Some instructions that might can Help Ya!  b33
    https://motorola-global-portal.custhelp.com/app/product_page/faqs/p_country_code/US/p/30,6720,8417
    How can I set up Hotmail?
    For Android 4.0 (Ice Cream Sandwich) users, Click here for  instructions.
    To setup Hotmail on your DROID RAZR   once you have already set-up your phone, follow directions below.  If you are addingHotmail account during your phone's initial startup, skip down to Set-up account menu (Instruction #3).
    Open Applications tray, touch My Accounts
    Select Add Account
    You will be at the Set-Up accounts menu with several other social network icons.
    Select Email  icon
    Enter your full Hotmail email address, including "@hotmail.com" domain name in all lower case.
    Enter Hotmail password.
    Leave Automatically configure account checked.
    Tap on Next. phone will connect to your email server and state "Success!" if account was set-up correctly.
    Your account is now set-up.  Please test sending and receiving an email. If you are having issues sending email from Hotmail after set-up, edit the Hotmail account Outgoing server settings, uncheck Use secure server and change the outgoing port from 25 to 587. (Use 587 for sending/outgoing settings with Wi-Fi )
    You should be able to send Hotmail email on port 25 if you are not on Wi-Fi .
    During the connection, you may be asked to complete a manual set-up if your email provider is not recognized, your email address/password is incorrect, or if your email provider has restrictions on mobile email set-up. Please check with your email provider to obtain all the information above. You will need your POP3 or IMAP port and server settings to complete a Manual set-up. If you have this information ready, proceed to next section regarding Manual setup.If prompted for manual setup, touch Manual setup. You can also get into manual setup by unchecking Automatically configure account after you entered your email address and password.
    Touch General Settings, confirm information in all General Settings fields are correct. Make any necessary changes, then select OK to exit this menu.
    Touch Incoming Server.
    Select POP Mail Server
    Enter POP3 server - pop3.live.com
    Activate check on Use Secure connection and Verify Certificate
    Enter Port 995
    Enter / Confirm your Username (complete email address including the @hotmail.com)
    Enter / Confirm your Hotmail Password
    Tap on OK
    Select Outgoing Server
    Enter SMTP server - smtp.live.com
    Do not check Use Secure connection, but check Verify Certificate
    Enter Port - 587 (or 25 when Non-Wi-Fi)
    Enter or just confirm your Username (complete email address including the @hotmail.com) if already displayed
    Enter or just confirm your Hotmail Password if already displayed.
    Tap on OK
    Tap on Other Settings
    Select length of time messages will be kept on phone. (1 week, 2 weeks, 1 month, 2 months, Never Delete Messages)
    Tap on OK
    Tap on OK again to submit Hotmail set-up.
    Your account is now set-up.  Please test sending and receiving an email.   
    If you are having issues sending email from Hotmail after set-up, edit the Hotmail account Outgoing server settings, uncheck Use secure server and change the outgoing port from 25 to 587
    You should be able to send Hotmail email on port 25 if you are not on Wi-Fi. If you are using Wi-Fi, use outgoing port 587.
    ***You can also bookmark the Hotmail Web Brower internet address into your DROID RAZR  for full Hotmail functionality and access to your personal folders at  http://mobile.live.com
    Hotmail, Live, and MSN email accounts now supports CorpSync connection for email accounts.You can get your email, calendar, and contacts pushed automatically to your phone using Exchange ActiveSync (EAS). EAS keeps everything in sync between your phone and Hotmail, so whatever you do on your phone, like delete an email, add an appointment, or update one of your contacts with a new number, will also be reflected on the web, and vice-versa.
    From the home screen, touch Apps > My Accounts > Add Account > Corporate Sync
    Enter your email address and password.
    Enter the following settings:
    Field
    Setting
    Domain
    Leave this blank
    Password
    Enter you password
    User name
    [email protected], [email protected], [email protected]
    Use Secure Connection
    Enable
    Proxy
    Leave Blank
    Server
    m.hotmail.com
    After the account has been validated,  go to Settings > Accounts, look for the new account that was just created; it will have the same name of the account that was used to start this setup process.
    Select the correct account name; then tap on General Settings and change the account name to the correct name for your Exchange account followed by tapping on OK.
    Transfer Hotmail contacts to your phoneTo transfer Hotmail contacts to your phone:Export your Hotmail Contacts
    Sign in to your Hotmail account.
    Click the Contacts tabs.
    Click the Print view.
    Align the cursor with the first letter of the 'Name' column.
    Highlight your contacts by holding down the cursor and dragging it down the list.
    Hold down the 'ctrl + c' keys to copy the list.
    Open Microsoft Excel (or a similar spreadsheet program that supports comma separated values).
    Select cell A1 in Excel (the top square on the left side).
    Hold down the 'ctrl + v' keys to paste.(Note: Do not use 'Paste Special' command.)
    Select File > Save as and type 'CSV (Comma delimited).' (Note: Make a note of where you saved the file.)
    Import Contacts into Google Gmail:
    Log on to Gmail, and then click Contacts at the top of the page
    The Contacts list opens in a new window
    Click Import Contacts
    Click Browse, and then navigate to the .csv file that you created in the "Export Outlook Contacts" section of this article
    Select the file, and then click Import Contacts
    After your contacts are imported, a dialog box appears and displays the total number of contacts imported
    Import to your phone:
    On your phone, from the Home screen, press the Menu key
    Touch Settings
    Touch Accounts
    Select your Google account marked with a "G" icon
    Make sure Sync contacts is checked with green checkmark.
    To immedately sync contacts, press Menu button, tap Sync Now
    Your phone will now sync and transfer your contacts from Gmail to your phone
    Adding a Hotmail Account using Android 4.0 Ice Cream Sandwich
    From the home screen touch > Settings > Accounts & Sync
    Tap Add Account > Email
    Select Windows Live Hotmail to add.If you would like to manually set up your account, touch Other from the email accounts screen.
    Enter the username and password. Your email account will be able to set up automatically.If you are unsuccessful with setting up your account automatically, touch Other from the email accounts, enter your email address and password and touch Manual Set up.
    Select POP3
    Use the following settings:
    Username: Enter / Confirm your Username (complete email address including the @hotmail.com)
    Password: Enter / Confirm your Hotmail Password
    POP3 server: pop3.live.com
    Port: Enter Port 995
    Security type: SSL/TLS
    Authentication Method: Auto
    Touch Next.
    SMTP server: smtp.live.com
    Port: Enter Port - 587 (or 25 when Non-Wi-Fi)
    Security type: STARTTLS
    Authentication Method: Auto
    Touch Next and select the desired Inbox checking frequency

  • Audio and Video Stuttering since update to Lion

    Hi all,
    since updating to Lion my macbook has had the issue that when you play any kind of sound or video whether it be itunes or streaming online, the sound cuts in and out and video cuts in and out. Is anyone else having this issue? Does anyone have any suggestion to fix this problem?
    Thanks.

    Okay, so I've tried it while unplugging my laptop and using VLC Media Player instead and that seems to work. The only hangup I have while plugging it back in to charge is that I get tiling like what you see on a cable box. 
    Surely there has to be a way to where I can watch movies feasibly on my laptop without having to unplug it. 

Maybe you are looking for